ar8216: introduce enable_eee swconfig attribute to control 802.3az EEE per port

Users reported network issues with AR8327 which turned out to be caused
by EEE not working correctly with certain link partners (ticket 14597).
The workaround was to disable EEE on all ports (changeset 41577).

The issue was with certain link partners only, therefore this patch
allows to control usage of EEE per port via swconfig.
Still the default is to initially disable EEE on all ports.

Successfully tested on a TL-WDR4900 (AR8327 rev.4)

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44021 3c298f89-4303-0410-b956-a3cf2f4a3e73

target/linux/generic/files/drivers/net/phy/ar8216.c

@@ -1041,6 +1041,7 @@ int
 ar8xxx_sw_reset_switch(struct switch_dev *dev)
 {
 	struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
+	const struct ar8xxx_chip *chip = priv->chip;
 	int i;
 
 	mutex_lock(&priv->reg_mutex);
@@ -1052,18 +1053,18 @@ ar8xxx_sw_reset_switch(struct switch_dev *dev)
 
 	/* Configure all ports */
 	for (i = 0; i < dev->ports; i++)
-		priv->chip->init_port(priv, i);
+		chip->init_port(priv, i);
 
 	priv->mirror_rx = false;
 	priv->mirror_tx = false;
 	priv->source_port = 0;
 	priv->monitor_port = 0;
 
-	priv->chip->init_globals(priv);
+	chip->init_globals(priv);
 
 	mutex_unlock(&priv->reg_mutex);
 
-	return ar8xxx_sw_hw_apply(dev);
+	return chip->sw_hw_apply(dev);
 }
 
 int
@@ -1194,7 +1195,7 @@ ar8xxx_sw_get_mirror_source_port(struct switch_dev *dev,
 	return 0;
 }
 
-static int
+int
 ar8xxx_sw_set_port_reset_mib(struct switch_dev *dev,
 			     const struct switch_attr *attr,
 			     struct switch_val *val)
@@ -1224,7 +1225,7 @@ unlock:
 	return ret;
 }
 
-static int
+int
 ar8xxx_sw_get_port_mib(struct switch_dev *dev,
 		       const struct switch_attr *attr,
 		       struct switch_val *val)
@@ -1390,6 +1391,7 @@ static const struct ar8xxx_chip ar8216_chip = {
 	.vtu_flush = ar8216_vtu_flush,
 	.vtu_load_vlan = ar8216_vtu_load_vlan,
 	.set_mirror_regs = ar8216_set_mirror_regs,
+	.sw_hw_apply = ar8xxx_sw_hw_apply,
 
 	.num_mibs = ARRAY_SIZE(ar8216_mibs),
 	.mib_decs = ar8216_mibs,
@@ -1416,6 +1418,7 @@ static const struct ar8xxx_chip ar8236_chip = {
 	.vtu_flush = ar8216_vtu_flush,
 	.vtu_load_vlan = ar8216_vtu_load_vlan,
 	.set_mirror_regs = ar8216_set_mirror_regs,
+	.sw_hw_apply = ar8xxx_sw_hw_apply,
 
 	.num_mibs = ARRAY_SIZE(ar8236_mibs),
 	.mib_decs = ar8236_mibs,
@@ -1442,6 +1445,7 @@ static const struct ar8xxx_chip ar8316_chip = {
 	.vtu_flush = ar8216_vtu_flush,
 	.vtu_load_vlan = ar8216_vtu_load_vlan,
 	.set_mirror_regs = ar8216_set_mirror_regs,
+	.sw_hw_apply = ar8xxx_sw_hw_apply,
 
 	.num_mibs = ARRAY_SIZE(ar8236_mibs),
 	.mib_decs = ar8236_mibs,

target/linux/generic/files/drivers/net/phy/ar8216.h

@@ -371,6 +371,7 @@ struct ar8xxx_chip {
 	void (*vtu_load_vlan)(struct ar8xxx_priv *priv, u32 vid, u32 port_mask);
 	void (*phy_fixup)(struct ar8xxx_priv *priv, int phy);
 	void (*set_mirror_regs)(struct ar8xxx_priv *priv);
+	int (*sw_hw_apply)(struct switch_dev *dev);
 
 	const struct ar8xxx_mib_desc *mib_decs;
 	unsigned num_mibs;
@@ -487,6 +488,14 @@ int
 ar8xxx_sw_get_port_link(struct switch_dev *dev, int port,
 			struct switch_port_link *link);
 int
+ar8xxx_sw_set_port_reset_mib(struct switch_dev *dev,
+                             const struct switch_attr *attr,
+                             struct switch_val *val);
+int
+ar8xxx_sw_get_port_mib(struct switch_dev *dev,
+                       const struct switch_attr *attr,
+                       struct switch_val *val);
+int
 ar8216_wait_bit(struct ar8xxx_priv *priv, int reg, u32 mask, u32 val);
 
 static inline struct ar8xxx_priv *

target/linux/generic/files/drivers/net/phy/ar8327.c

@@ -30,7 +30,6 @@
 #include "ar8327.h"
 
 extern const struct ar8xxx_mib_desc ar8236_mibs[39];
-extern const struct switch_attr ar8xxx_sw_attr_port[2];
 extern const struct switch_attr ar8xxx_sw_attr_vlan[1];
 
 static u32
@@ -651,7 +650,9 @@ ar8327_cleanup(struct ar8xxx_priv *priv)
 static void
 ar8327_init_globals(struct ar8xxx_priv *priv)
 {
+	struct ar8327_data *data = priv->chip_data;
 	u32 t;
+	int i;
 
 	/* enable CPU port and disable mirror port */
 	t = AR8327_FWD_CTRL0_CPU_PORT_EN |
@@ -672,14 +673,9 @@ ar8327_init_globals(struct ar8xxx_priv *priv)
 	ar8xxx_reg_set(priv, AR8327_REG_MODULE_EN,
 		       AR8327_MODULE_EN_MIB);
 
-	/* Disable EEE on all ports due to stability issues */
+	/* Disable EEE on all phy's due to stability issues */
-	t = ar8xxx_read(priv, AR8327_REG_EEE_CTRL);
+	for (i = 0; i < AR8XXX_NUM_PHYS; i++)
-	t |= AR8327_EEE_CTRL_DISABLE_PHY(0) |
+		data->eee[i] = false;
-	     AR8327_EEE_CTRL_DISABLE_PHY(1) |
-	     AR8327_EEE_CTRL_DISABLE_PHY(2) |
-	     AR8327_EEE_CTRL_DISABLE_PHY(3) |
-	     AR8327_EEE_CTRL_DISABLE_PHY(4);
-	ar8xxx_write(priv, AR8327_REG_EEE_CTRL, t);
 }
 
 static void
@@ -892,6 +888,73 @@ ar8327_set_mirror_regs(struct ar8xxx_priv *priv)
 			   AR8327_PORT_HOL_CTRL1_EG_MIRROR_EN);
 }
 
+static int
+ar8327_sw_set_eee(struct switch_dev *dev,
+		  const struct switch_attr *attr,
+		  struct switch_val *val)
+{
+	struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
+	struct ar8327_data *data = priv->chip_data;
+	int port = val->port_vlan;
+	int phy;
+
+	if (port >= dev->ports)
+		return -EINVAL;
+	if (port == 0 || port == 6)
+		return -EOPNOTSUPP;
+
+	phy = port - 1;
+
+	data->eee[phy] = !!(val->value.i);
+
+	return 0;
+}
+
+static int
+ar8327_sw_get_eee(struct switch_dev *dev,
+		  const struct switch_attr *attr,
+		  struct switch_val *val)
+{
+	struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
+	const struct ar8327_data *data = priv->chip_data;
+	int port = val->port_vlan;
+	int phy;
+
+	if (port >= dev->ports)
+		return -EINVAL;
+	if (port == 0 || port == 6)
+		return -EOPNOTSUPP;
+
+	phy = port - 1;
+
+	val->value.i = data->eee[phy];
+
+	return 0;
+}
+
+static int
+ar8327_sw_hw_apply(struct switch_dev *dev)
+{
+	struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
+	const struct ar8327_data *data = priv->chip_data;
+	int ret, i;
+
+	ret = ar8xxx_sw_hw_apply(dev);
+	if (ret)
+		return ret;
+
+	for (i=0; i < AR8XXX_NUM_PHYS; i++) {
+		if (data->eee[i])
+			ar8xxx_reg_clear(priv, AR8327_REG_EEE_CTRL,
+			       AR8327_EEE_CTRL_DISABLE_PHY(i));
+		else
+			ar8xxx_reg_set(priv, AR8327_REG_EEE_CTRL,
+			       AR8327_EEE_CTRL_DISABLE_PHY(i));
+	}
+
+	return 0;
+}
+
 static const struct switch_attr ar8327_sw_attr_globals[] = {
 	{
 		.type = SWITCH_TYPE_INT,
@@ -941,14 +1004,38 @@ static const struct switch_attr ar8327_sw_attr_globals[] = {
  	},
 };
 
+static const struct switch_attr ar8327_sw_attr_port[] = {
+	{
+		.type = SWITCH_TYPE_NOVAL,
+		.name = "reset_mib",
+		.description = "Reset single port MIB counters",
+		.set = ar8xxx_sw_set_port_reset_mib,
+	},
+	{
+		.type = SWITCH_TYPE_STRING,
+		.name = "mib",
+		.description = "Get port's MIB counters",
+		.set = NULL,
+		.get = ar8xxx_sw_get_port_mib,
+	},
+	{
+		.type = SWITCH_TYPE_INT,
+		.name = "enable_eee",
+		.description = "Enable EEE PHY sleep mode",
+		.set = ar8327_sw_set_eee,
+		.get = ar8327_sw_get_eee,
+		.max = 1,
+	},
+};
+
 static const struct switch_dev_ops ar8327_sw_ops = {
 	.attr_global = {
 		.attr = ar8327_sw_attr_globals,
 		.n_attr = ARRAY_SIZE(ar8327_sw_attr_globals),
 	},
 	.attr_port = {
-		.attr = ar8xxx_sw_attr_port,
+		.attr = ar8327_sw_attr_port,
-		.n_attr = ARRAY_SIZE(ar8xxx_sw_attr_port),
+		.n_attr = ARRAY_SIZE(ar8327_sw_attr_port),
 	},
 	.attr_vlan = {
 		.attr = ar8xxx_sw_attr_vlan,
@@ -958,7 +1045,7 @@ static const struct switch_dev_ops ar8327_sw_ops = {
 	.set_port_pvid = ar8xxx_sw_set_pvid,
 	.get_vlan_ports = ar8327_sw_get_ports,
 	.set_vlan_ports = ar8327_sw_set_ports,
-	.apply_config = ar8xxx_sw_hw_apply,
+	.apply_config = ar8327_sw_hw_apply,
 	.reset_switch = ar8xxx_sw_reset_switch,
 	.get_port_link = ar8xxx_sw_get_port_link,
 };
@@ -987,6 +1074,7 @@ const struct ar8xxx_chip ar8327_chip = {
 	.vtu_load_vlan = ar8327_vtu_load_vlan,
 	.phy_fixup = ar8327_phy_fixup,
 	.set_mirror_regs = ar8327_set_mirror_regs,
+	.sw_hw_apply = ar8327_sw_hw_apply,
 
 	.num_mibs = ARRAY_SIZE(ar8236_mibs),
 	.mib_decs = ar8236_mibs,
@@ -1017,6 +1105,7 @@ const struct ar8xxx_chip ar8337_chip = {
 	.vtu_load_vlan = ar8327_vtu_load_vlan,
 	.phy_fixup = ar8327_phy_fixup,
 	.set_mirror_regs = ar8327_set_mirror_regs,
+	.sw_hw_apply = ar8327_sw_hw_apply,
 
 	.num_mibs = ARRAY_SIZE(ar8236_mibs),
 	.mib_decs = ar8236_mibs,

target/linux/generic/files/drivers/net/phy/ar8327.h

@@ -219,6 +219,9 @@ struct ar8327_data {
 
 	struct ar8327_led **leds;
 	unsigned int num_leds;
+
+	/* all fields below are cleared on reset */
+	bool eee[AR8XXX_NUM_PHYS];
 };
 
 #endif