Add bcm5354 patches from #2757
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9685 3c298f89-4303-0410-b956-a3cf2f4a3e73master
Florian Fainelli
parent
92368e2f85
commit
d663a1f145
|
|
@ -0,0 +1,347 @@
|
|||
From: Michael Buesch <mb@bu3sch.de>
|
||||
Date: Wed, 10 Oct 2007 06:47:17 +0000 (-0700)
|
||||
Subject: USB: ohci SSB bus glue
|
||||
X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Fralf%2Flinux.git;a=commitdiff_plain;h=c604e851486eabcbeb73e984279d436ce121fd5d
|
||||
|
||||
USB: ohci SSB bus glue
|
||||
|
||||
This adds SSB bus glue for the USB OHCI HCD.
|
||||
|
||||
Signed-off-by: Michael Buesch <mb@bu3sch.de>
|
||||
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
||||
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
|
||||
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
||||
---
|
||||
|
||||
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
|
||||
index 565d6ef..c978d62 100644
|
||||
--- a/drivers/usb/host/Kconfig
|
||||
+++ b/drivers/usb/host/Kconfig
|
||||
@@ -154,6 +154,19 @@ config USB_OHCI_HCD_PCI
|
||||
Enables support for PCI-bus plug-in USB controller cards.
|
||||
If unsure, say Y.
|
||||
|
||||
+config USB_OHCI_HCD_SSB
|
||||
+ bool "OHCI support for Broadcom SSB OHCI core"
|
||||
+ depends on USB_OHCI_HCD && SSB && EXPERIMENTAL
|
||||
+ default n
|
||||
+ ---help---
|
||||
+ Support for the Sonics Silicon Backplane (SSB) attached
|
||||
+ Broadcom USB OHCI core.
|
||||
+
|
||||
+ This device is present in some embedded devices with
|
||||
+ Broadcom based SSB bus.
|
||||
+
|
||||
+ If unsure, say N.
|
||||
+
|
||||
config USB_OHCI_BIG_ENDIAN_DESC
|
||||
bool
|
||||
depends on USB_OHCI_HCD
|
||||
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
|
||||
index f7c6ced..240c7f5 100644
|
||||
--- a/drivers/usb/host/ohci-hcd.c
|
||||
+++ b/drivers/usb/host/ohci-hcd.c
|
||||
@@ -1033,11 +1033,17 @@ MODULE_LICENSE ("GPL");
|
||||
#define PS3_SYSTEM_BUS_DRIVER ps3_ohci_driver
|
||||
#endif
|
||||
|
||||
+#ifdef CONFIG_USB_OHCI_HCD_SSB
|
||||
+#include "ohci-ssb.c"
|
||||
+#define SSB_OHCI_DRIVER ssb_ohci_driver
|
||||
+#endif
|
||||
+
|
||||
#if !defined(PCI_DRIVER) && \
|
||||
!defined(PLATFORM_DRIVER) && \
|
||||
!defined(OF_PLATFORM_DRIVER) && \
|
||||
!defined(SA1111_DRIVER) && \
|
||||
- !defined(PS3_SYSTEM_BUS_DRIVER)
|
||||
+ !defined(PS3_SYSTEM_BUS_DRIVER) && \
|
||||
+ !defined(SSB_OHCI_DRIVER)
|
||||
#error "missing bus glue for ohci-hcd"
|
||||
#endif
|
||||
|
||||
@@ -1082,10 +1088,20 @@ static int __init ohci_hcd_mod_init(void)
|
||||
goto error_pci;
|
||||
#endif
|
||||
|
||||
+#ifdef SSB_OHCI_DRIVER
|
||||
+ retval = ssb_driver_register(&SSB_OHCI_DRIVER);
|
||||
+ if (retval)
|
||||
+ goto error_ssb;
|
||||
+#endif
|
||||
+
|
||||
return retval;
|
||||
|
||||
/* Error path */
|
||||
+#ifdef SSB_OHCI_DRIVER
|
||||
+ error_ssb:
|
||||
+#endif
|
||||
#ifdef PCI_DRIVER
|
||||
+ pci_unregister_driver(&PCI_DRIVER);
|
||||
error_pci:
|
||||
#endif
|
||||
#ifdef SA1111_DRIVER
|
||||
@@ -1110,6 +1126,9 @@ module_init(ohci_hcd_mod_init);
|
||||
|
||||
static void __exit ohci_hcd_mod_exit(void)
|
||||
{
|
||||
+#ifdef SSB_OHCI_DRIVER
|
||||
+ ssb_driver_unregister(&SSB_OHCI_DRIVER);
|
||||
+#endif
|
||||
#ifdef PCI_DRIVER
|
||||
pci_unregister_driver(&PCI_DRIVER);
|
||||
#endif
|
||||
diff --git a/drivers/usb/host/ohci-ssb.c b/drivers/usb/host/ohci-ssb.c
|
||||
new file mode 100644
|
||||
index 0000000..bc3e785
|
||||
--- /dev/null
|
||||
+++ b/drivers/usb/host/ohci-ssb.c
|
||||
@@ -0,0 +1,247 @@
|
||||
+/*
|
||||
+ * Sonics Silicon Backplane
|
||||
+ * Broadcom USB-core OHCI driver
|
||||
+ *
|
||||
+ * Copyright 2007 Michael Buesch <mb@bu3sch.de>
|
||||
+ *
|
||||
+ * Derived from the OHCI-PCI driver
|
||||
+ * Copyright 1999 Roman Weissgaerber
|
||||
+ * Copyright 2000-2002 David Brownell
|
||||
+ * Copyright 1999 Linus Torvalds
|
||||
+ * Copyright 1999 Gregory P. Smith
|
||||
+ *
|
||||
+ * Derived from the USBcore related parts of Broadcom-SB
|
||||
+ * Copyright 2005 Broadcom Corporation
|
||||
+ *
|
||||
+ * Licensed under the GNU/GPL. See COPYING for details.
|
||||
+ */
|
||||
+#include <linux/ssb/ssb.h>
|
||||
+
|
||||
+
|
||||
+#define SSB_OHCI_TMSLOW_HOSTMODE (1 << 29)
|
||||
+
|
||||
+struct ssb_ohci_device {
|
||||
+ struct ohci_hcd ohci; /* _must_ be at the beginning. */
|
||||
+
|
||||
+ u32 enable_flags;
|
||||
+};
|
||||
+
|
||||
+static inline
|
||||
+struct ssb_ohci_device *hcd_to_ssb_ohci(struct usb_hcd *hcd)
|
||||
+{
|
||||
+ return (struct ssb_ohci_device *)(hcd->hcd_priv);
|
||||
+}
|
||||
+
|
||||
+
|
||||
+static int ssb_ohci_reset(struct usb_hcd *hcd)
|
||||
+{
|
||||
+ struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
|
||||
+ struct ohci_hcd *ohci = &ohcidev->ohci;
|
||||
+ int err;
|
||||
+
|
||||
+ ohci_hcd_init(ohci);
|
||||
+ err = ohci_init(ohci);
|
||||
+
|
||||
+ return err;
|
||||
+}
|
||||
+
|
||||
+static int ssb_ohci_start(struct usb_hcd *hcd)
|
||||
+{
|
||||
+ struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
|
||||
+ struct ohci_hcd *ohci = &ohcidev->ohci;
|
||||
+ int err;
|
||||
+
|
||||
+ err = ohci_run(ohci);
|
||||
+ if (err < 0) {
|
||||
+ ohci_err(ohci, "can't start\n");
|
||||
+ ohci_stop(hcd);
|
||||
+ }
|
||||
+
|
||||
+ return err;
|
||||
+}
|
||||
+
|
||||
+#ifdef CONFIG_PM
|
||||
+static int ssb_ohci_hcd_suspend(struct usb_hcd *hcd, pm_message_t message)
|
||||
+{
|
||||
+ struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
|
||||
+ struct ohci_hcd *ohci = &ohcidev->ohci;
|
||||
+ unsigned long flags;
|
||||
+
|
||||
+ spin_lock_irqsave(&ohci->lock, flags);
|
||||
+
|
||||
+ ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
|
||||
+ ohci_readl(ohci, &ohci->regs->intrdisable); /* commit write */
|
||||
+
|
||||
+ /* make sure snapshot being resumed re-enumerates everything */
|
||||
+ if (message.event == PM_EVENT_PRETHAW)
|
||||
+ ohci_usb_reset(ohci);
|
||||
+
|
||||
+ clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
|
||||
+
|
||||
+ spin_unlock_irqrestore(&ohci->lock, flags);
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static int ssb_ohci_hcd_resume(struct usb_hcd *hcd)
|
||||
+{
|
||||
+ set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
|
||||
+ usb_hcd_resume_root_hub(hcd);
|
||||
+ return 0;
|
||||
+}
|
||||
+#endif /* CONFIG_PM */
|
||||
+
|
||||
+static const struct hc_driver ssb_ohci_hc_driver = {
|
||||
+ .description = "ssb-usb-ohci",
|
||||
+ .product_desc = "SSB OHCI Controller",
|
||||
+ .hcd_priv_size = sizeof(struct ssb_ohci_device),
|
||||
+
|
||||
+ .irq = ohci_irq,
|
||||
+ .flags = HCD_MEMORY | HCD_USB11,
|
||||
+
|
||||
+ .reset = ssb_ohci_reset,
|
||||
+ .start = ssb_ohci_start,
|
||||
+ .stop = ohci_stop,
|
||||
+ .shutdown = ohci_shutdown,
|
||||
+
|
||||
+#ifdef CONFIG_PM
|
||||
+ .suspend = ssb_ohci_hcd_suspend,
|
||||
+ .resume = ssb_ohci_hcd_resume,
|
||||
+#endif
|
||||
+
|
||||
+ .urb_enqueue = ohci_urb_enqueue,
|
||||
+ .urb_dequeue = ohci_urb_dequeue,
|
||||
+ .endpoint_disable = ohci_endpoint_disable,
|
||||
+
|
||||
+ .get_frame_number = ohci_get_frame,
|
||||
+
|
||||
+ .hub_status_data = ohci_hub_status_data,
|
||||
+ .hub_control = ohci_hub_control,
|
||||
+ .hub_irq_enable = ohci_rhsc_enable,
|
||||
+ .bus_suspend = ohci_bus_suspend,
|
||||
+ .bus_resume = ohci_bus_resume,
|
||||
+
|
||||
+ .start_port_reset = ohci_start_port_reset,
|
||||
+};
|
||||
+
|
||||
+static void ssb_ohci_detach(struct ssb_device *dev)
|
||||
+{
|
||||
+ struct usb_hcd *hcd = ssb_get_drvdata(dev);
|
||||
+
|
||||
+ usb_remove_hcd(hcd);
|
||||
+ iounmap(hcd->regs);
|
||||
+ usb_put_hcd(hcd);
|
||||
+ ssb_device_disable(dev, 0);
|
||||
+}
|
||||
+
|
||||
+static int ssb_ohci_attach(struct ssb_device *dev)
|
||||
+{
|
||||
+ struct ssb_ohci_device *ohcidev;
|
||||
+ struct usb_hcd *hcd;
|
||||
+ int err = -ENOMEM;
|
||||
+ u32 tmp, flags = 0;
|
||||
+
|
||||
+ if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV)
|
||||
+ flags |= SSB_OHCI_TMSLOW_HOSTMODE;
|
||||
+
|
||||
+ ssb_device_enable(dev, flags);
|
||||
+
|
||||
+ hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev,
|
||||
+ dev->dev->bus_id);
|
||||
+ if (!hcd)
|
||||
+ goto err_dev_disable;
|
||||
+ ohcidev = hcd_to_ssb_ohci(hcd);
|
||||
+ ohcidev->enable_flags = flags;
|
||||
+
|
||||
+ tmp = ssb_read32(dev, SSB_ADMATCH0);
|
||||
+ hcd->rsrc_start = ssb_admatch_base(tmp);
|
||||
+ hcd->rsrc_len = ssb_admatch_size(tmp);
|
||||
+ hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
|
||||
+ if (!hcd->regs)
|
||||
+ goto err_put_hcd;
|
||||
+ err = usb_add_hcd(hcd, dev->irq, IRQF_SHARED);
|
||||
+ if (err)
|
||||
+ goto err_iounmap;
|
||||
+
|
||||
+ ssb_set_drvdata(dev, hcd);
|
||||
+
|
||||
+ return err;
|
||||
+
|
||||
+err_iounmap:
|
||||
+ iounmap(hcd->regs);
|
||||
+err_put_hcd:
|
||||
+ usb_put_hcd(hcd);
|
||||
+err_dev_disable:
|
||||
+ ssb_device_disable(dev, flags);
|
||||
+ return err;
|
||||
+}
|
||||
+
|
||||
+static int ssb_ohci_probe(struct ssb_device *dev,
|
||||
+ const struct ssb_device_id *id)
|
||||
+{
|
||||
+ int err;
|
||||
+ u16 chipid_top;
|
||||
+
|
||||
+ /* USBcores are only connected on embedded devices. */
|
||||
+ chipid_top = (dev->bus->chip_id & 0xFF00);
|
||||
+ if (chipid_top != 0x4700 && chipid_top != 0x5300)
|
||||
+ return -ENODEV;
|
||||
+
|
||||
+ /* TODO: Probably need checks here; is the core connected? */
|
||||
+
|
||||
+ if (usb_disabled())
|
||||
+ return -ENODEV;
|
||||
+
|
||||
+ /* We currently always attach SSB_DEV_USB11_HOSTDEV
|
||||
+ * as HOST OHCI. If we want to attach it as Client device,
|
||||
+ * we must branch here and call into the (yet to
|
||||
+ * be written) Client mode driver. Same for remove(). */
|
||||
+
|
||||
+ err = ssb_ohci_attach(dev);
|
||||
+
|
||||
+ return err;
|
||||
+}
|
||||
+
|
||||
+static void ssb_ohci_remove(struct ssb_device *dev)
|
||||
+{
|
||||
+ ssb_ohci_detach(dev);
|
||||
+}
|
||||
+
|
||||
+#ifdef CONFIG_PM
|
||||
+
|
||||
+static int ssb_ohci_suspend(struct ssb_device *dev, pm_message_t state)
|
||||
+{
|
||||
+ ssb_device_disable(dev, 0);
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static int ssb_ohci_resume(struct ssb_device *dev)
|
||||
+{
|
||||
+ struct usb_hcd *hcd = ssb_get_drvdata(dev);
|
||||
+ struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
|
||||
+
|
||||
+ ssb_device_enable(dev, ohcidev->enable_flags);
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+#else /* !CONFIG_PM */
|
||||
+#define ssb_ohci_suspend NULL
|
||||
+#define ssb_ohci_resume NULL
|
||||
+#endif /* CONFIG_PM */
|
||||
+
|
||||
+static const struct ssb_device_id ssb_ohci_table[] = {
|
||||
+ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV),
|
||||
+ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV),
|
||||
+ SSB_DEVTABLE_END
|
||||
+};
|
||||
+MODULE_DEVICE_TABLE(ssb, ssb_ohci_table);
|
||||
+
|
||||
+static struct ssb_driver ssb_ohci_driver = {
|
||||
+ .name = KBUILD_MODNAME,
|
||||
+ .id_table = ssb_ohci_table,
|
||||
+ .probe = ssb_ohci_probe,
|
||||
+ .remove = ssb_ohci_remove,
|
||||
+ .suspend = ssb_ohci_suspend,
|
||||
+ .resume = ssb_ohci_resume,
|
||||
+};
|
||||
|
||||
|
|
@ -0,0 +1,30 @@
|
|||
From: Al Viro <viro@ftp.linux.org.uk>
|
||||
Date: Sat, 13 Oct 2007 21:29:47 +0000 (+0100)
|
||||
Subject: Fix ohci-ssb with !CONFIG_PM
|
||||
X-Git-Tag: linux-2.6.24-rc1~57^2~38
|
||||
X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Fralf%2Flinux.git;a=commitdiff_plain;h=4735b37cf434175c2b7b36b3b68f1e60e8ec8527;hp=d773b33972a663cfaf066e966f87922a74088a1e
|
||||
|
||||
Fix ohci-ssb with !CONFIG_PM
|
||||
|
||||
ohci_bus_{suspend,resume} exists only if we have CONFIG_PM; do the same
|
||||
thing as other subdrivers...
|
||||
|
||||
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
||||
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||||
---
|
||||
|
||||
diff --git a/drivers/usb/host/ohci-ssb.c b/drivers/usb/host/ohci-ssb.c
|
||||
index bc3e785..fe70e72 100644
|
||||
--- a/drivers/usb/host/ohci-ssb.c
|
||||
+++ b/drivers/usb/host/ohci-ssb.c
|
||||
@@ -117,8 +117,10 @@ static const struct hc_driver ssb_ohci_hc_driver = {
|
||||
.hub_status_data = ohci_hub_status_data,
|
||||
.hub_control = ohci_hub_control,
|
||||
.hub_irq_enable = ohci_rhsc_enable,
|
||||
+#ifdef CONFIG_PM
|
||||
.bus_suspend = ohci_bus_suspend,
|
||||
.bus_resume = ohci_bus_resume,
|
||||
+#endif
|
||||
|
||||
.start_port_reset = ohci_start_port_reset,
|
||||
};
|
||||
|
|
@ -0,0 +1,72 @@
|
|||
--- a/drivers/usb/host/ohci-ssb.c 2007-11-05 07:56:56.000000000 -0800
|
||||
+++ b/drivers/usb/host/ohci-ssb.c 2007-11-05 08:26:15.000000000 -0800
|
||||
@@ -142,10 +142,59 @@
|
||||
int err = -ENOMEM;
|
||||
u32 tmp, flags = 0;
|
||||
|
||||
- if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV)
|
||||
+ /*
|
||||
+ * THE FOLLOWING COMMENTS PRESERVED FROM GPL SOURCE RELEASE
|
||||
+ *
|
||||
+ * The USB core requires a special bit to be set during core
|
||||
+ * reset to enable host (OHCI) mode. Resetting the SB core in
|
||||
+ * pcibios_enable_device() is a hack for compatibility with
|
||||
+ * vanilla usb-ohci so that it does not have to know about
|
||||
+ * SB. A driver that wants to use the USB core in device mode
|
||||
+ * should know about SB and should reset the bit back to 0
|
||||
+ * after calling pcibios_enable_device().
|
||||
+ */
|
||||
+
|
||||
+ if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) {
|
||||
flags |= SSB_OHCI_TMSLOW_HOSTMODE;
|
||||
+ ssb_device_enable(dev, flags);
|
||||
+ }
|
||||
+
|
||||
+ /*
|
||||
+ * USB 2.0 special considerations:
|
||||
+ *
|
||||
+ * 1. Since the core supports both OHCI and EHCI functions, it must
|
||||
+ * only be reset once.
|
||||
+ *
|
||||
+ * 2. In addition to the standard SB reset sequence, the Host Control
|
||||
+ * Register must be programmed to bring the USB core and various
|
||||
+ * phy components out of reset.
|
||||
+ */
|
||||
+
|
||||
+ else if (dev->id.coreid == SSB_DEV_USB20_HOST) {
|
||||
+#warning FIX ME need test for core being up & exit
|
||||
+ ssb_device_enable(dev, 0);
|
||||
+ ssb_write32(dev, 0x200, 0x7ff);
|
||||
+ udelay(1);
|
||||
+ if (dev->id.revision == 1) { // bug in rev 1
|
||||
+
|
||||
+ /* Change Flush control reg */
|
||||
+ tmp = ssb_read32(dev, 0x400);
|
||||
+ tmp &= ~8;
|
||||
+ ssb_write32(dev, 0x400, tmp);
|
||||
+ tmp = ssb_read32(dev, 0x400);
|
||||
+ printk("USB20H fcr: 0x%0x\n", tmp);
|
||||
+
|
||||
+ /* Change Shim control reg */
|
||||
+ tmp = ssb_read32(dev, 0x304);
|
||||
+ tmp &= ~0x100;
|
||||
+ ssb_write32(dev, 0x304, tmp);
|
||||
+ tmp = ssb_read32(dev, 0x304);
|
||||
+ printk("USB20H shim: 0x%0x\n", tmp);
|
||||
+ }
|
||||
+ }
|
||||
+ else
|
||||
+ ssb_device_enable(dev, 0);
|
||||
|
||||
- ssb_device_enable(dev, flags);
|
||||
|
||||
hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev,
|
||||
dev->dev->bus_id);
|
||||
@@ -235,6 +284,7 @@
|
||||
static const struct ssb_device_id ssb_ohci_table[] = {
|
||||
SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV),
|
||||
SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV),
|
||||
+ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
|
||||
SSB_DEVTABLE_END
|
||||
};
|
||||
MODULE_DEVICE_TABLE(ssb, ssb_ohci_table);
|
||||
|
|
@ -0,0 +1,14 @@
|
|||
--- linux-2.6.23.1/drivers/usb/host/ohci-ssb.c 2007-11-26 14:01:22.000000000 -0500
|
||||
+++ linux-2.6.23.1.new/drivers/usb/host/ohci-ssb.c 2007-11-26 14:16:08.000000000 -0500
|
||||
@@ -195,6 +195,11 @@
|
||||
else
|
||||
ssb_device_enable(dev, 0);
|
||||
|
||||
+ /*
|
||||
+ * Set dma mask - 32 bit mask is just an assumption
|
||||
+ */
|
||||
+ if (ssb_dma_set_mask(dev, DMA_32BIT_MASK))
|
||||
+ return -EOPNOTSUPP;
|
||||
|
||||
hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev,
|
||||
dev->dev->bus_id);
|
||||
Loading…
Reference in New Issue