add new broadcom system code and new wlan driver (old driver still used by default)

git-svn-id: svn://svn.openwrt.org/openwrt/trunk/openwrt@2395 3c298f89-4303-0410-b956-a3cf2f4a3e73
master
Felix Fietkau 2005-11-08 16:51:04 +00:00
parent 9c5d398a8e
commit ce0acef170
5 changed files with 5616 additions and 2101 deletions

View File

@ -64,6 +64,15 @@ config BR2_PACKAGE_KMOD_BRCM_WL
help
Proprietary driver for Broadcom Wireless chipsets
config BR2_PACKAGE_KMOD_BRCM_WL2
prompt "kmod-brcm-wl2..................... Broadcom Wireless Network Driver (new)"
tristate
depends BR2_LINUX_2_4_BRCM
default m
help
Proprietary driver for Broadcom Wireless chipsets
New version with Multi-BSS capability
config BR2_PACKAGE_KMOD_CPMAC
prompt "kmod-cpmac........................ AR7 CPMAC Network Driver"
tristate

View File

@ -0,0 +1,7 @@
Package: kmod-brcm-wl2
Priority: optional
Section: sys
Maintainer: Felix Fietkau <nbd@openwrt.org>
Source: buildroot internal
Description: Proprietary driver for Broadcom Wireless chipsets
New version with multi-BSS support

View File

@ -6,11 +6,14 @@
#############################################################
# broadcom specific kmod packages
$(eval $(call KMOD_template,BRCM_WL,brcm-wl,\
$(MODULES_DIR)/kernel/drivers/net/wl/wl.o \
,CONFIG_WL,,10,wl))
$(eval $(call KMOD_template,BRCM_WL2,brcm-wl2,\
$(BUILD_DIR)/wl/wl2/wl.o \
,CONFIG_WL,,10,wl))
$(eval $(call KMOD_template,BRCM_ET,brcm-et,\
$(MODULES_DIR)/kernel/drivers/net/et/et.o \
,CONFIG_ET,,10,et))
@ -24,10 +27,10 @@ $(eval $(call KMOD_template,LP,lp,\
LINUX_BINARY_DRIVER_SITE=http://openwrt.org/downloads/sources
# proprietary driver, extracted from Linksys GPL sourcetree WRT54GS 4.70.6
LINUX_BINARY_WL_DRIVER=kernel-binary-wl-0.4.tar.gz
LINUX_BINARY_WL_MD5SUM=0659fa8f1805be6ec03188ef8e1216cc
LINUX_ET_DRIVER=kernel-source-et-0.11.tar.gz
LINUX_ET_MD5SUM=bdc23ab59440793e35cab039457f6358
LINUX_BINARY_WL_DRIVER=kernel-binary-wl-0.5.tar.gz
LINUX_BINARY_WL_MD5SUM=78e839842bdc04022bb44469f92b1131
LINUX_ET_DRIVER=kernel-source-et-0.12.tar.gz
LINUX_ET_MD5SUM=14c6810cd3ee74b5f9f86b98fdaaeb18
$(DL_DIR)/$(LINUX_BINARY_WL_DRIVER):
$(SCRIPT_DIR)/download.pl $(DL_DIR) $(LINUX_BINARY_WL_DRIVER) $(LINUX_BINARY_WL_MD5SUM) $(LINUX_BINARY_DRIVER_SITE) $(MAKE_TRACE)
@ -38,6 +41,7 @@ $(DL_DIR)/$(LINUX_ET_DRIVER):
$(LINUX_DIR)/.unpacked: $(DL_DIR)/$(LINUX_BINARY_WL_DRIVER) $(DL_DIR)/$(LINUX_ET_DRIVER)
$(LINUX_DIR)/.depend_done: $(LINUX_DIR)/.drivers-unpacked
$(LINUX_DIR)/.modules_done: $(LINUX_DIR)/.drivers-unpacked
$(STAMP_DIR)/.linux-compile: $(LINUX_DIR)/.drivers-installed
$(LINUX_DIR)/.drivers-unpacked: $(LINUX_DIR)/.unpacked
-mkdir -p $(BUILD_DIR)
@ -52,6 +56,11 @@ $(LINUX_DIR)/.drivers-unpacked: $(LINUX_DIR)/.unpacked
cp -fpR $(BUILD_DIR)/et/*.h $(LINUX_DIR)/arch/mips/bcm947xx/include/
touch $@
$(LINUX_DIR)/.drivers-installed: $(LINUX_DIR)/.modules_done
mkdir -p $(LINUX_BUILD_DIR)/modules/lib/modules/2.4.30/kernel/drivers/net/wl
@-[ -f $(LINUX_BUILD_DIR)/modules/lib/modules/2.4.30/kernel/drivers/net/wl/wl.o ] || cp $(LINUX_DIR)/drivers/net/wl/wl.o $(LINUX_BUILD_DIR)/modules/lib/modules/2.4.30/kernel/drivers/net/wl/
touch $@
linux-dirclean: drivers-clean
drivers-clean:

File diff suppressed because it is too large Load Diff

View File

@ -36,6 +36,7 @@
#include <linux/sysctl.h>
#include <asm/io.h>
#include <typedefs.h>
#include <osl.h>
#include <bcmdevs.h>
#include <sbutils.h>
@ -47,9 +48,9 @@ static void *sbh;
#define DMZ_GPIO (1<<7)
static void set_gpio(uint32 mask, uint32 value) {
sb_gpiocontrol(sbh,mask,0);
sb_gpioouten(sbh,mask,mask);
sb_gpioout(sbh,mask,value);
sb_gpiocontrol(sbh,mask, 0, GPIO_DRV_PRIORITY);
sb_gpioouten(sbh,mask,mask,GPIO_DRV_PRIORITY);
sb_gpioout(sbh,mask,value,GPIO_DRV_PRIORITY);
}
static void v2_set_diag(u8 state) {
@ -122,8 +123,8 @@ static int proc_reset(ctl_table *table, int write, struct file *filp,
{
if (reset_gpio) {
sb_gpiocontrol(sbh,reset_gpio,reset_gpio);
sb_gpioouten(sbh,reset_gpio,0);
sb_gpiocontrol(sbh,reset_gpio,reset_gpio,GPIO_DRV_PRIORITY);
sb_gpioouten(sbh,reset_gpio,0,GPIO_DRV_PRIORITY);
reset=!(sb_gpioin(sbh)&reset_gpio);
if (reset_polarity) reset=!reset;
@ -222,8 +223,8 @@ static int __init diag_init()
}
sb_gpiocontrol(sbh,reset_gpio,reset_gpio);
sb_gpioouten(sbh,reset_gpio,0);
sb_gpiocontrol(sbh,reset_gpio,reset_gpio,GPIO_DRV_PRIORITY);
sb_gpioouten(sbh,reset_gpio,0,GPIO_DRV_PRIORITY);
reset_polarity=!(sb_gpioin(sbh)&reset_gpio);
diag_sysctl_header = register_sysctl_table(sys_diag, 0);