From b8a4800ab1b913dda8a2cf0646401c77226bc0ff Mon Sep 17 00:00:00 2001
From: Florian Fainelli <florian@openwrt.org>
Date: Fri, 27 Jul 2012 15:35:09 +0000
Subject: [PATCH] [brcm63xx] add D-link DVA-G3810BN-TL-1 support

Signed-Off-By: Jeroen van Bemmel <jbemmel@zonnet.nl>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32893 3c298f89-4303-0410-b956-a3cf2f4a3e73
---
 .../555-board_dva-g3810bn-tl-1.patch          | 82 +++++++++++++++++++
 .../801-ssb_export_fallback_sprom.patch       |  4 +-
 2 files changed, 84 insertions(+), 2 deletions(-)
 create mode 100644 target/linux/brcm63xx/patches-3.3/555-board_dva-g3810bn-tl-1.patch

diff --git a/target/linux/brcm63xx/patches-3.3/555-board_dva-g3810bn-tl-1.patch b/target/linux/brcm63xx/patches-3.3/555-board_dva-g3810bn-tl-1.patch
new file mode 100644
index 0000000000..d2f91df6c5
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.3/555-board_dva-g3810bn-tl-1.patch
@@ -0,0 +1,82 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -2538,6 +2538,71 @@ static struct board_info __initdata boar
+ 		},
+ 	}
+ };
++
++/* D-Link DVA-G3810BN/TL */
++static struct board_info __initdata board_DVAG3810BN = {
++	.name			= "DVAG3810BN",
++	.expected_cpu_id	= 0x6358,
++
++	.has_uart0		= 1,
++	.has_enet0		= 1,
++	.has_enet1		= 1,
++	.has_pci		= 1,
++
++	.enet0 = {
++		.has_phy		= 0,
++		.use_internal_phy	= 1,
++		.force_speed_100	= 1,
++		.force_duplex_full	= 1,
++	},
++
++	.enet1 = {
++		.force_speed_100	= 1,
++		.force_duplex_full	= 1,
++	},
++
++
++	.has_ohci0		= 1,
++	.has_pccard		= 1,
++	.has_ehci0		= 1,
++
++	.leds = {
++		{
++			.name	= "DVAG3810BN::voip",
++			.gpio	= 1,
++		},
++		{
++			.name	= "DVAG3810BN::dsl",
++			.gpio	= 22,
++			.active_low  = 1,
++		},
++		{
++			.name	= "DVAG3810BN::internet",
++			.gpio	= 23,
++			.active_low  = 1,
++		},
++		{
++			.name	= "DVAG3810BN::power",
++			.gpio	= 4,
++			.default_trigger = "default-on",
++		},
++		{
++			.name	= "DVAG3810BN::stop",
++			.gpio	= 5,
++		},
++	},
++
++	.buttons = {
++		{
++			.desc	= "reset",
++			.gpio	= 34,
++			.active_low = 1,
++			.type	= EV_KEY,
++			.code	= KEY_RESTART,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
++};
+ #endif
+ 
+ /*
+@@ -2735,6 +2800,7 @@ static const struct board_info __initdat
+ 	&board_ct6373_1,
+ 	&board_HW553,
+ 	&board_spw303v,
++	&board_DVAG3810BN,
+ #endif
+ 
+ #ifdef CONFIG_BCM63XX_CPU_6368
diff --git a/target/linux/brcm63xx/patches-3.3/801-ssb_export_fallback_sprom.patch b/target/linux/brcm63xx/patches-3.3/801-ssb_export_fallback_sprom.patch
index c06fce4bce..5794fa72e6 100644
--- a/target/linux/brcm63xx/patches-3.3/801-ssb_export_fallback_sprom.patch
+++ b/target/linux/brcm63xx/patches-3.3/801-ssb_export_fallback_sprom.patch
@@ -8,7 +8,7 @@
  #include <linux/spi/spi.h>
  #include <linux/spi/spi_gpio.h>
  #include <linux/spi/74x164.h>
-@@ -2765,7 +2766,7 @@ static void __init nb4_nvram_fixup(void)
+@@ -2831,7 +2832,7 @@ static void __init nb4_nvram_fixup(void)
   * bcm4318 WLAN work
   */
  #ifdef CONFIG_SSB_PCIHOST
@@ -17,7 +17,7 @@
  	.revision		= 0x02,
  	.board_rev		= 0x17,
  	.country_code		= 0x0,
-@@ -2785,6 +2786,7 @@ static struct ssb_sprom bcm63xx_sprom =
+@@ -2851,6 +2852,7 @@ static struct ssb_sprom bcm63xx_sprom =
  	.boardflags_lo		= 0x2848,
  	.boardflags_hi		= 0x0000,
  };