Create a dummy sit package for 2.4 kernelsq

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10668 3c298f89-4303-0410-b956-a3cf2f4a3e73

package/kernel/modules/network.mk

@@ -240,6 +240,15 @@ $(eval $(call KernelPackage,ipv6))
 define KernelPackage/sit
   SUBMENU:=$(NETWORK_SUPPORT_MENU)
   TITLE:=IPv6-in-IPv4 tunnelling
+endef
+
+# sit is compiled in the 2.4 ipv6 stack
+define KernelPackage/sit/2.4
+  DEPENDS:= @LINUX_2_4 +kmod-ipv6
+  KCONFIG:=CONFIG_IPV6
+endef
+
+define KernelPackage/sit/2.6
   DEPENDS:= @LINUX_2_6 +kmod-ipv6 +kmod-iptunnel4
   KCONFIG+=CONFIG_IPV6_SIT
   FILES:=$(LINUX_DIR)/net/ipv6/sit.$(LINUX_KMOD_SUFFIX)

target/linux/atheros/image/Makefile

@@ -7,12 +7,34 @@
 include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/image.mk
 
-define Image/BuildKernel
+LOADADDR = 0x81000000           # RAM start + 16M
+KERNEL_ENTRY = 0x80041000
+RAMSIZE = 0x00100000            # 1MB
+IMAGE_COPY = 1
+
+LOADER_MAKEOPTS= \
+		KDIR=$(KDIR) \
+		LOADADDR=$(LOADADDR) \
+		KERNEL_ENTRY=$(KERNEL_ENTRY) \
+		RAMSIZE=$(RAMSIZE) \
+		IMAGE_COPY=$(IMAGE_COPY)
+
+define Build/Clean
+	$(MAKE) -C $(GENERIC_PLATFORM_DIR)/image/lzma-loader $(LOADER_MAKEOPTS) clean
+endef
+        
+define Image/Prepare
 	cp $(KDIR)/vmlinux.elf $(BIN_DIR)/openwrt-$(BOARD)-vmlinux.elf
 	gzip -9 -c $(KDIR)/vmlinux > $(KDIR)/vmlinux.bin.gz
 	$(STAGING_DIR_HOST)/bin/lzma e $(KDIR)/vmlinux $(KDIR)/vmlinux.bin.l7
 	dd if=$(KDIR)/vmlinux.bin.l7 of=$(BIN_DIR)/openwrt-$(BOARD)-vmlinux.lzma bs=65536 conv=sync
 	dd if=$(KDIR)/vmlinux.bin.gz of=$(BIN_DIR)/openwrt-$(BOARD)-vmlinux.gz bs=65536 conv=sync
+	cat $(KDIR)/vmlinux | $(STAGING_DIR_HOST)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma
+	$(MAKE) -C $(GENERIC_PLATFORM_DIR)/image/lzma-loader $(LOADER_MAKEOPTS) clean compile
+endef
+
+define Image/BuildKernel
+	$(CP) $(KDIR)/loader.bin $(BIN_DIR)/openwrt-$(BOARD)-vmlinux
 endef
 
 define Image/Build/squashfs
@@ -24,5 +46,14 @@ define Image/Build
 	dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/openwrt-$(BOARD)-root.$(1) bs=128k conv=sync
 endef
 
+ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
+  define Image/Prepare
+	cat $(KDIR)/vmlinux | $(STAGING_DIR_HOST)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma
+	$(MAKE) -C $(GENERIC_PLATFORM_DIR)/image/lzma-loader $(LOADER_MAKEOPTS) clean compile
+  endef
+  define Image/BuildKernel
+	$(CP) $(KDIR)/loader.bin $(BIN_DIR)/openwrt-$(BOARD)-vmlinux
+  endef
+endif
 
 $(eval $(call BuildImage))

target/linux/generic-2.6/image/lzma-loader/src/Makefile

@@ -49,7 +49,7 @@ lzma.bin: lzma.elf
 
 ifeq ($(IMAGE_COPY),1)
 LOADER_ENTRY ?= $(KERNEL_ENTRY)
-lzma.o: decompress.o LzmaDecode.o kernel.o
+lzma.o: decompress.o LzmaDecode.o kernel.o print.o printf.o uart16550.o
 	sed -e 's,@LOADADDR@,$(LOADADDR),g' -e 's,@ENTRY@,entry,g' lzma.lds.in >lzma-stage2.lds
 	$(LD) -static --no-warn-mismatch -e entry -Tlzma-stage2.lds -o temp-$@ $^
 	$(OBJCOPY) temp-$@ lzma.tmp
@@ -60,7 +60,7 @@ lzma.elf: start.o lzma.o
 	sed -e 's,@LOADADDR@,$(LOADER_ENTRY),g' lzma-copy.lds.in >lzma-copy.lds
 	$(LD) -s -Tlzma-copy.lds -o $@ $^
 else
-lzma.elf: start.o decompress.o LzmaDecode.o kernel.o
+lzma.elf: start.o decompress.o LzmaDecode.o kernel.o print.o printf.o uart16550.o
 	$(LD) -s -Tlzma.lds -o $@ $^
 endif
 

target/linux/generic-2.6/image/lzma-loader/src/decompress.c

@@ -145,6 +145,7 @@ void entry(unsigned long icache_size, unsigned long icache_lsize,
 		get_byte();
 
 	/* decompress kernel */
+	printf("Decompressing kernel\n");
 	if ((i = LzmaDecode(&vs, &callback,
 	(unsigned char*)KERNEL_ENTRY, osize, &osize)) == LZMA_RESULT_OK)
 	{
@@ -152,6 +153,8 @@ void entry(unsigned long icache_size, unsigned long icache_lsize,
 		blast_icache(icache_size, icache_lsize);
 
 		/* Jump to load address */
+		printf("Jumping !\n");
 		((void (*)(int a0, int a1, int a2, int a3)) KERNEL_ENTRY)(arg0, arg1, arg2, arg3);
 	}
+	printf("Failed to decompress !\n");
 }

tools/firmware-utils/src/mkzynfw.c

@@ -119,7 +119,7 @@ int num_blocks = 0;
 #define AR7_CODE_START		0x94008000
 
 #define ATHEROS_FLASH_BASE	0xBFC00000
-#define ATHEROS_CODE_START	0x80000800
+#define ATHEROS_CODE_START	0x80e00000
 
 #define BOARD(n, d, v, m, fb, fs, cs, fo) { \
 	.name = (n), .desc=(d), \