[brcm63xx] more bcm6345 fixes and definitions, thanks to AndyI

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17066 3c298f89-4303-0410-b956-a3cf2f4a3e73

target/linux/brcm63xx/files/arch/mips/bcm63xx/clk.c

@@ -51,6 +51,8 @@ static void enet_misc_set(struct clk *clk, int enable)
 
 	if (BCMCPU_IS_6338())
 		mask = CKCTL_6338_ENET_EN;
+	else if (BCMCPU_IS_6345())
+		mask = CKCTL_6345_ENET_EN;
 	else if (BCMCPU_IS_6348())
 		mask = CKCTL_6348_ENET_EN;
 	else

target/linux/brcm63xx/files/arch/mips/bcm63xx/cpu.c

@@ -88,11 +88,25 @@ static const unsigned long bcm96338_regs_spi[] = {
  */
 
 static const unsigned long bcm96345_regs_base[] = {
+	[RSET_DSL_LMEM]		= BCM_6345_DSL_LMEM_BASE,
 	[RSET_PERF]		= BCM_6345_PERF_BASE,
 	[RSET_TIMER]		= BCM_6345_TIMER_BASE,
 	[RSET_WDT]		= BCM_6345_WDT_BASE,
 	[RSET_UART0]		= BCM_6345_UART0_BASE,
 	[RSET_GPIO]		= BCM_6345_GPIO_BASE,
+	[RSET_SPI]		= BCM_6345_SPI_BASE,
+	[RSET_OHCI0]		= BCM_6345_OHCI0_BASE,
+	[RSET_OHCI_PRIV]	= BCM_6345_OHCI_PRIV_BASE,
+	[RSET_USBH_PRIV]	= BCM_6345_USBH_PRIV_BASE,
+	[RSET_UDC0]		= BCM_6345_UDC0_BASE,
+	[RSET_MPI]		= BCM_6345_MPI_BASE,
+	[RSET_PCMCIA]		= BCM_6345_PCMCIA_BASE,
+	[RSET_SDRAM]		= BCM_6345_SDRAM_BASE,
+	[RSET_DSL]		= BCM_6345_DSL_BASE,
+	[RSET_ENET0]		= BCM_6345_ENET0_BASE,
+	[RSET_ENETDMA]		= BCM_6345_ENETDMA_BASE,
+	[RSET_MEMC]		= BCM_6345_MEMC_BASE,
+	[RSET_DDR]		= BCM_6345_DDR_BASE,
 };
 
 static const int bcm96345_irqs[] = {
@@ -101,6 +115,8 @@ static const int bcm96345_irqs[] = {
 	[IRQ_DSL]		= BCM_6345_DSL_IRQ,
 	[IRQ_ENET0]		= BCM_6345_ENET0_IRQ,
 	[IRQ_ENET_PHY]		= BCM_6345_ENET_PHY_IRQ,
+	[IRQ_ENET0_RXDMA]	= BCM_6345_ENET0_RXDMA_IRQ,
+	[IRQ_ENET0_TXDMA]	= BCM_6345_ENET0_TXDMA_IRQ,
 };
 
 /*

target/linux/brcm63xx/files/arch/mips/bcm63xx/prom.c

@@ -28,6 +28,8 @@ void __init prom_init(void)
 	/* disable all hardware blocks clock for now */
 	if (BCMCPU_IS_6338())
 		mask = CKCTL_6338_ALL_SAFE_EN;
+	else if (BCMCPU_IS_6345())
+		mask = CKCTL_6345_ALL_SAFE_EN;
 	else if (BCMCPU_IS_6348())
 		mask = CKCTL_6348_ALL_SAFE_EN;
 	else

target/linux/brcm63xx/files/include/asm-mips/mach-bcm63xx/bcm63xx_cpu.h

@@ -151,18 +151,39 @@ enum bcm63xx_regs_set {
 /*
  * 6345 register sets base address
  */
+#define BCM_6345_DSL_LMEM_BASE		(0xfff00000)
 #define BCM_6345_PERF_BASE		(0xfffe0000)
+#define BCM_6345_BB_BASE		(0xfffe0100)
 #define BCM_6345_TIMER_BASE		(0xfffe0200)
 #define BCM_6345_WDT_BASE		(0xfffe021c)
 #define BCM_6345_UART0_BASE		(0xfffe0300)
 #define BCM_6345_GPIO_BASE		(0xfffe0400)
+#define BCM_6345_SPI_BASE		(0xdeadbeef)
+#define BCM_6345_UDC0_BASE		(0xdeadbeef)
+#define BCM_6345_USBDMA_BASE		(0xfffe2800)
+#define BCM_6345_ENET0_BASE		(0xfffe1800)
+#define BCM_6345_ENETDMA_BASE		(0xfffe2800)
+#define BCM_6345_PCMCIA_BASE		(0xfffe2028)
+#define BCM_6345_MPI_BASE		(0xdeadbeef)
+#define BCM_6345_OHCI0_BASE		(0xfffe2100)
+#define BCM_6345_OHCI_PRIV_BASE		(0xfffe2200)
+#define BCM_6345_USBH_PRIV_BASE		(0xdeadbeef)
+#define BCM_6345_SDRAM_REGS_BASE	(0xfffe2300)
+#define BCM_6345_DSL_BASE		(0xdeadbeef)
+#define BCM_6345_SAR_BASE		(0xdeadbeef)
+#define BCM_6345_UBUS_BASE		(0xdeadbeef)
+#define BCM_6345_ENET1_BASE		(0xdeadbeef)
+#define BCM_6345_EHCI0_BASE		(0xdeadbeef)
+#define BCM_6345_SDRAM_BASE		(0xfffe2300)
+#define BCM_6345_MEMC_BASE		(0xdeadbeef)
+#define BCM_6345_DDR_BASE		(0xdeadbeef)
 
 /*
  * 6348 register sets base address
  */
 #define BCM_6348_DSL_LMEM_BASE		(0xfff00000)
 #define BCM_6348_PERF_BASE		(0xfffe0000)
-#define BCM_6348_BB_BASE		(0xfffe0100) /* bus bridge registers */
+#define BCM_6348_BB_BASE		(0xfffe0100)
 #define BCM_6348_TIMER_BASE		(0xfffe0200)
 #define BCM_6348_WDT_BASE		(0xfffe021c)
 #define BCM_6348_UART0_BASE		(0xfffe0300)
@@ -269,6 +290,8 @@ static inline unsigned long bcm63xx_regset_address(enum bcm63xx_regs_set set)
 #endif
 #ifdef CONFIG_BCM63XX_CPU_6345
 	switch (set) {
+	case RSET_DSL_LMEM:
+		return BCM_6345_DSL_LMEM_BASE;
 	case RSET_PERF:
 		return BCM_6345_PERF_BASE;
 	case RSET_TIMER:
@@ -279,6 +302,34 @@ static inline unsigned long bcm63xx_regset_address(enum bcm63xx_regs_set set)
 		return BCM_6345_UART0_BASE;
 	case RSET_GPIO:
 		return BCM_6345_GPIO_BASE;
+	case RSET_SPI_BASE:
+		return BCM_6345_SPI_BASE;
+	case RSET_UDC0:
+		return BCM_6345_UDC0_BASE;
+	case RSET_OHCI0:
+		return BCM_6345_OHCI0_BASE;
+	case RSET_OHCI_PRIV:
+		return BCM_6345_OHCI_PRIV_BASE;
+	case RSET_USBH_PRIV:
+		return BCM_6345_USBH_PRIV_BASE;
+	case RSET_MPI:
+		return BCM_6345_MPI_BASE;
+	case RSET_PCMCIA:
+		return BCM_6345_PCMCIA_BASE;
+	case RSET_DSL:
+		return BCM_6345_DSL_BASE;
+	case RSET_ENET0:
+		return BCM_6345_ENET0_BASE;
+	case RSET_ENETDMA:
+		return BCM_6345_ENETDMA_BASE;
+	case RSET_EHCI0:
+		return BCM_6345_EHCI0_BASE;
+	case RSET_SDRAM:
+		return BCM_6345_SDRAM_BASE;
+	case RSET_MEMC:
+		return BCM_6345_MEMC_BASE;
+	case RSET_DDR:
+		return BCM_6345_DDR_BASE;
 	}
 #endif
 #ifdef CONFIG_BCM63XX_CPU_6348
@@ -548,6 +599,8 @@ enum bcm63xx_irq {
 #define BCM_6345_USB_IRQ		(IRQ_INTERNAL_BASE + 5)
 #define BCM_6345_ENET0_IRQ		(IRQ_INTERNAL_BASE + 8)
 #define BCM_6345_ENET_PHY_IRQ		(IRQ_INTERNAL_BASE + 12)
+#define BCM_6345_ENET0_RXDMA_IRQ	(IRQ_INTERNAL_BASE + 13 + 1)
+#define BCM_6345_ENET0_TXDMA_IRQ	(IRQ_INTERNAL_BASE + 13 + 2)
 
 /*
  * 6348 irqs

target/linux/brcm63xx/files/include/asm-mips/mach-bcm63xx/bcm63xx_regs.h

@@ -30,10 +30,17 @@
 					CKCTL_6338_SPI_EN)
 
 #define CKCTL_6345_CPU_EN		(1 << 0)
+#define CKCTL_6345_BUS_EN		(1 << 1)
+#define CKCTL_6345_EBI_EN		(1 << 2)
 #define CKCTL_6345_UART_EN		(1 << 3)
+#define CKCTL_6345_ADSLPHY_EN		(1 << 4)
 #define CKCTL_6345_ENET_EN		(1 << 7)
 #define CKCTL_6345_USBH_EN		(1 << 8)
 
+#define CKCTL_6345_ALL_SAFE_EN		(CKCTL_6345_ENET_EN |	\
+					CKCTL_6345_USBH_EN |	\
+					CKCTL_6345_ADSLPHY_EN)
+
 #define CKCTL_6348_ADSLPHY_EN		(1 << 0)
 #define CKCTL_6348_MPI_EN		(1 << 1)
 #define CKCTL_6348_SDRAM_EN		(1 << 2)
@@ -82,7 +89,6 @@
 
 /* Interrupt Mask register */
 #define PERF_IRQMASK_REG		0xc
-#define PERF_IRQSTAT_REG		0x10
 
 /* Interrupt Status register */
 #define PERF_IRQSTAT_REG		0x10