upgrade avr32 to 2.6.30-rc7

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16291 3c298f89-4303-0410-b956-a3cf2f4a3e73
master
Imre Kaloz 2009-06-02 06:42:23 +00:00
parent 2c5cec770e
commit ae9fd50c01
3 changed files with 246 additions and 14 deletions

View File

@ -10,7 +10,7 @@ ARCH:=avr32
BOARD:=avr32
BOARDNAME:=Atmel AVR32
FEATURES:=squashfs
LINUX_VERSION:=2.6.28.10
LINUX_VERSION:=2.6.30-rc7
include $(INCLUDE_DIR)/target.mk

View File

@ -9,19 +9,22 @@ CONFIG_ARCH_REQUIRE_GPIOLIB=y
# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ASYNC_TX_DMA is not set
CONFIG_AT32AP700X_WDT=m
# CONFIG_ATMEL_PWM is not set
# CONFIG_ATMEL_SSC is not set
CONFIG_ATMEL_TCB_CLKSRC=y
CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
CONFIG_ATMEL_TCB_CLKSRC=y
CONFIG_ATMEL_TCLIB=y
CONFIG_AVR32=y
CONFIG_BASE_SMALL=0
CONFIG_BITREVERSE=y
CONFIG_BOARD_ATNGW100=y
# CONFIG_BOARD_ATNGW100_EVKLCD10X is not set
CONFIG_BOARD_ATNGW100=y
# CONFIG_BOARD_ATSTK1000 is not set
# CONFIG_BOARD_FAVR_32 is not set
# CONFIG_BOARD_HAMMERHEAD is not set
# CONFIG_BOARD_MERISC is not set
# CONFIG_BOARD_MIMC200 is not set
CONFIG_CLASSIC_RCU=y
CONFIG_CPU_AT32AP7000=y
@ -34,8 +37,8 @@ CONFIG_DW_DMAC=y
CONFIG_ENTRY_ADDRESS=0x90000000
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_GPIO=y
CONFIG_GPIOLIB=y
CONFIG_HARDIRQS_SW_RESEND=y
@ -48,35 +51,35 @@ CONFIG_HAVE_CLK=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C=m
CONFIG_INITRAMFS_SOURCE=""
CONFIG_LEDS_GPIO=y
CONFIG_LOADER_U_BOOT=y
CONFIG_LOAD_ADDRESS=0x10000000
CONFIG_LOADER_U_BOOT=y
CONFIG_MACB=y
CONFIG_MMC=m
CONFIG_MMC_ATMELMCI=m
# CONFIG_MMC_ATMELMCI_DMA is not set
CONFIG_MMC_BLOCK=m
CONFIG_MMC_ATMELMCI=m
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_MMC_BLOCK=m
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC=m
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_SPI is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_DATAFLASH=y
# CONFIG_MTD_DATAFLASH_OTP is not set
# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
CONFIG_MTD_PHYSMAP_LEN=0x0
CONFIG_MTD_PHYSMAP_START=0x80000000
CONFIG_MTD_PHYSMAP=y
# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
CONFIG_NF_CT_ACCT=y
# CONFIG_NET_DMA is not set
CONFIG_NF_CT_ACCT=y
# CONFIG_NMI_DEBUGGING is not set
CONFIG_NO_HZ=y
CONFIG_NR_QUICK=2
@ -93,16 +96,16 @@ CONFIG_SCHED_HRTICK=y
# CONFIG_SCSI_DMA is not set
# CONFIG_SDIO_UART is not set
# CONFIG_SERIAL_8250 is not set
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_SERIAL_ATMEL_PDC=y
# CONFIG_SERIAL_ATMEL_TTYAT is not set
CONFIG_SPI=y
CONFIG_SERIAL_ATMEL=y
CONFIG_SPI_ATMEL=y
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_GPIO is not set
CONFIG_SPI_MASTER=y
# CONFIG_SPI_SPIDEV is not set
CONFIG_SPI=y
CONFIG_SUBARCH_AVR32B=y
CONFIG_TICK_ONESHOT=y
# CONFIG_VGASTATE is not set

View File

@ -0,0 +1,229 @@
--- a/arch/avr32/boards/atngw100/setup.c
+++ b/arch/avr32/boards/atngw100/setup.c
@@ -118,7 +118,7 @@ static void __init set_hw_addr(struct pl
void __init setup_board(void)
{
- at32_map_usart(1, 0, 0); /* USART 1: /dev/ttyS0, DB9 */
+ at32_map_usart(1, 0); /* USART 1: /dev/ttyS0, DB9 */
at32_setup_serial_console(0);
}
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@@ -252,12 +252,12 @@ static void __init atstk1002_setup_extda
void __init setup_board(void)
{
#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
- at32_map_usart(0, 1, 0); /* USART 0/B: /dev/ttyS1, IRDA */
+ at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */
#else
- at32_map_usart(1, 0, 0); /* USART 1/A: /dev/ttyS0, DB9 */
+ at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */
#endif
/* USART 2/unused: expansion connector */
- at32_map_usart(3, 2, 0); /* USART 3/C: /dev/ttyS2, DB9 */
+ at32_map_usart(3, 2); /* USART 3/C: /dev/ttyS2, DB9 */
at32_setup_serial_console(0);
}
--- a/arch/avr32/boards/atstk1000/atstk1003.c
+++ b/arch/avr32/boards/atstk1000/atstk1003.c
@@ -115,12 +115,12 @@ static void __init atstk1003_setup_extda
void __init setup_board(void)
{
#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
- at32_map_usart(0, 1, 0); /* USART 0/B: /dev/ttyS1, IRDA */
+ at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */
#else
- at32_map_usart(1, 0, 0); /* USART 1/A: /dev/ttyS0, DB9 */
+ at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */
#endif
/* USART 2/unused: expansion connector */
- at32_map_usart(3, 2, 0); /* USART 3/C: /dev/ttyS2, DB9 */
+ at32_map_usart(3, 2); /* USART 3/C: /dev/ttyS2, DB9 */
at32_setup_serial_console(0);
}
--- a/arch/avr32/boards/atstk1000/atstk1004.c
+++ b/arch/avr32/boards/atstk1000/atstk1004.c
@@ -120,12 +120,12 @@ static void __init atstk1004_setup_extda
void __init setup_board(void)
{
#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
- at32_map_usart(0, 1, 0); /* USART 0/B: /dev/ttyS1, IRDA */
+ at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */
#else
- at32_map_usart(1, 0, 0); /* USART 1/A: /dev/ttyS0, DB9 */
+ at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */
#endif
/* USART 2/unused: expansion connector */
- at32_map_usart(3, 2, 0); /* USART 3/C: /dev/ttyS2, DB9 */
+ at32_map_usart(3, 2); /* USART 3/C: /dev/ttyS2, DB9 */
at32_setup_serial_console(0);
}
--- a/arch/avr32/boards/favr-32/setup.c
+++ b/arch/avr32/boards/favr-32/setup.c
@@ -250,7 +250,7 @@ static void __init favr32_setup_atmel_pw
void __init setup_board(void)
{
- at32_map_usart(3, 0, 0); /* USART 3 => /dev/ttyS0 */
+ at32_map_usart(3, 0); /* USART 3 => /dev/ttyS0 */
at32_setup_serial_console(0);
}
--- a/arch/avr32/boards/hammerhead/setup.c
+++ b/arch/avr32/boards/hammerhead/setup.c
@@ -165,7 +165,7 @@ static void __init set_hw_addr(struct pl
void __init setup_board(void)
{
- at32_map_usart(1, 0, 0); /* USART 1: /dev/ttyS0, DB9 */
+ at32_map_usart(1, 0); /* USART 1: /dev/ttyS0, DB9 */
at32_setup_serial_console(0);
}
--- a/arch/avr32/boards/merisc/setup.c
+++ b/arch/avr32/boards/merisc/setup.c
@@ -231,9 +231,9 @@ static void detect_merisc_board_id(void)
void __init setup_board(void)
{
- at32_map_usart(0, 0, 0);
- at32_map_usart(1, 1, 0);
- at32_map_usart(3, 3, 0);
+ at32_map_usart(0, 0);
+ at32_map_usart(1, 1);
+ at32_map_usart(3, 3);
at32_setup_serial_console(1);
}
@@ -248,7 +248,7 @@ static int __init merisc_init(void)
at32_reserve_pin(GPIO_PIOE_BASE, ATMEL_EBI_PE_DATA_ALL | (1 << 26));
if (merisc_board_id >= 1)
- at32_map_usart(2, 2, 0);
+ at32_map_usart(2, 2);
at32_add_device_usart(0);
at32_add_device_usart(1);
--- a/arch/avr32/boards/mimc200/setup.c
+++ b/arch/avr32/boards/mimc200/setup.c
@@ -175,10 +175,10 @@ static void __init set_hw_addr(struct pl
void __init setup_board(void)
{
- at32_map_usart(0, 0, 0); /* USART 0: /dev/ttyS0 (TTL --> Altera) */
- at32_map_usart(1, 1, 0); /* USART 1: /dev/ttyS1 (RS232) */
- at32_map_usart(2, 2, 0); /* USART 2: /dev/ttyS2 (RS485) */
- at32_map_usart(3, 3, 0); /* USART 3: /dev/ttyS3 (RS422 Multidrop) */
+ at32_map_usart(0, 0); /* USART 0: /dev/ttyS0 (TTL --> Altera) */
+ at32_map_usart(1, 1); /* USART 1: /dev/ttyS1 (RS232) */
+ at32_map_usart(2, 2); /* USART 2: /dev/ttyS2 (RS485) */
+ at32_map_usart(3, 3); /* USART 3: /dev/ttyS3 (RS422 Multidrop) */
}
static struct i2c_gpio_platform_data i2c_gpio_data = {
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -966,68 +966,56 @@ static struct resource atmel_usart3_reso
DEFINE_DEV_DATA(atmel_usart, 3);
DEV_CLK(usart, atmel_usart3, pba, 6);
-static inline void configure_usart0_pins(int flags)
+static inline void configure_usart0_pins(void)
{
u32 pin_mask = (1 << 8) | (1 << 9); /* RXD & TXD */
- if (flags & ATMEL_USART_RTS) pin_mask |= (1 << 6);
- if (flags & ATMEL_USART_CTS) pin_mask |= (1 << 7);
- if (flags & ATMEL_USART_CLK) pin_mask |= (1 << 10);
select_peripheral(PIOA, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP);
}
-static inline void configure_usart1_pins(int flags)
+static inline void configure_usart1_pins(void)
{
u32 pin_mask = (1 << 17) | (1 << 18); /* RXD & TXD */
- if (flags & ATMEL_USART_RTS) pin_mask |= (1 << 19);
- if (flags & ATMEL_USART_CTS) pin_mask |= (1 << 20);
- if (flags & ATMEL_USART_CLK) pin_mask |= (1 << 16);
select_peripheral(PIOA, pin_mask, PERIPH_A, AT32_GPIOF_PULLUP);
}
-static inline void configure_usart2_pins(int flags)
+static inline void configure_usart2_pins(void)
{
u32 pin_mask = (1 << 26) | (1 << 27); /* RXD & TXD */
- if (flags & ATMEL_USART_RTS) pin_mask |= (1 << 30);
- if (flags & ATMEL_USART_CTS) pin_mask |= (1 << 29);
- if (flags & ATMEL_USART_CLK) pin_mask |= (1 << 28);
select_peripheral(PIOB, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP);
}
-static inline void configure_usart3_pins(int flags)
+static inline void configure_usart3_pins(void)
{
u32 pin_mask = (1 << 18) | (1 << 17); /* RXD & TXD */
- if (flags & ATMEL_USART_RTS) pin_mask |= (1 << 16);
- if (flags & ATMEL_USART_CTS) pin_mask |= (1 << 15);
- if (flags & ATMEL_USART_CLK) pin_mask |= (1 << 19);
select_peripheral(PIOB, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP);
}
static struct platform_device *__initdata at32_usarts[4];
-void __init at32_map_usart(unsigned int hw_id, unsigned int line, int flags)
+void __init at32_map_usart(unsigned int hw_id, unsigned int line)
{
struct platform_device *pdev;
switch (hw_id) {
case 0:
pdev = &atmel_usart0_device;
- configure_usart0_pins(flags);
+ configure_usart0_pins();
break;
case 1:
pdev = &atmel_usart1_device;
- configure_usart1_pins(flags);
+ configure_usart1_pins();
break;
case 2:
pdev = &atmel_usart2_device;
- configure_usart2_pins(flags);
+ configure_usart2_pins();
break;
case 3:
pdev = &atmel_usart3_device;
- configure_usart3_pins(flags);
+ configure_usart3_pins();
break;
default:
return;
--- a/arch/avr32/mach-at32ap/include/mach/board.h
+++ b/arch/avr32/mach-at32ap/include/mach/board.h
@@ -26,17 +26,12 @@ static inline void __deprecated at32_add
#define ATMEL_MAX_UART 4
extern struct platform_device *atmel_default_console_device;
-/* Flags for selecting USART extra pins */
-#define ATMEL_USART_RTS 0x01
-#define ATMEL_USART_CTS 0x02
-#define ATMEL_USART_CLK 0x03
-
struct atmel_uart_data {
short use_dma_tx; /* use transmit DMA? */
short use_dma_rx; /* use receive DMA? */
void __iomem *regs; /* virtual base address, if any */
};
-void at32_map_usart(unsigned int hw_id, unsigned int line, int flags);
+void at32_map_usart(unsigned int hw_id, unsigned int line);
struct platform_device *at32_add_device_usart(unsigned int id);
struct eth_platform_data {