refresh madwifi patches

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11932 3c298f89-4303-0410-b956-a3cf2f4a3e73
master
Felix Fietkau 2008-07-25 22:41:13 +00:00
parent aee16549b6
commit a0a21d4268
23 changed files with 53 additions and 55 deletions

View File

@ -1,6 +1,6 @@
--- a/ath/if_ath.c
+++ b/ath/if_ath.c
@@ -4157,7 +4157,9 @@
@@ -4160,7 +4160,9 @@
rfilt |= HAL_RX_FILTER_PROM;
if (ic->ic_opmode == IEEE80211_M_STA ||
sc->sc_opmode == HAL_M_IBSS || /* NB: AHDEMO too */

View File

@ -1,6 +1,6 @@
--- a/ath/if_ath.c
+++ b/ath/if_ath.c
@@ -6456,6 +6456,7 @@
@@ -6459,6 +6459,7 @@
int type;
u_int phyerr;
u_int processed = 0, early_stop = 0;
@ -8,7 +8,7 @@
DPRINTF(sc, ATH_DEBUG_RX_PROC, "invoked\n");
process_rx_again:
@@ -6557,24 +6558,8 @@
@@ -6560,24 +6561,8 @@
}
if (rs->rs_status & HAL_RXERR_MIC) {
sc->sc_stats.ast_rx_badmic++;
@ -35,7 +35,7 @@
}
/*
* Reject error frames if we have no vaps that
@@ -6613,8 +6598,9 @@
@@ -6616,8 +6601,9 @@
/*
* Finished monitor mode handling, now reject
* error frames before passing to other vaps
@ -46,7 +46,7 @@
ieee80211_dev_kfree_skb(&skb);
goto rx_next;
}
@@ -6622,6 +6608,26 @@
@@ -6625,6 +6611,26 @@
/* remove the CRC */
skb_trim(skb, skb->len - IEEE80211_CRC_LEN);
@ -73,7 +73,7 @@
/*
* From this point on we assume the frame is at least
* as large as ieee80211_frame_min; verify that.
@@ -6634,6 +6640,7 @@
@@ -6637,6 +6643,7 @@
goto rx_next;
}

View File

@ -9,7 +9,7 @@
ATH_RXBUF_LOCK_IRQ(sc);
if (sc->sc_rxbufcur == NULL)
sc->sc_rxbufcur = STAILQ_FIRST(&sc->sc_rxbuf);
@@ -8978,6 +8976,7 @@
@@ -8981,6 +8979,7 @@
sc->sc_curchan.channel);
sc->sc_stats.ast_per_calfail++;
}
@ -17,7 +17,7 @@
ath_hal_process_noisefloor(ah);
if (isIQdone == AH_TRUE) {
@@ -9046,6 +9045,7 @@
@@ -9049,6 +9048,7 @@
struct ath_softc *sc = dev->priv;
(void) ath_chan_set(sc, ic->ic_curchan);
@ -25,7 +25,7 @@
/*
* If we are returning to our bss channel then mark state
* so the next recv'd beacon's TSF will be used to sync the
@@ -9314,6 +9314,7 @@
@@ -9317,6 +9317,7 @@
}
ath_hal_process_noisefloor(ah);

View File

@ -1,6 +1,6 @@
--- a/ath/if_ath.c
+++ b/ath/if_ath.c
@@ -8692,6 +8692,10 @@
@@ -8695,6 +8695,10 @@
sc->sc_rxbufcur = NULL;

View File

@ -1,6 +1,6 @@
--- a/ath/if_ath.c
+++ b/ath/if_ath.c
@@ -9795,7 +9795,9 @@
@@ -9798,7 +9798,9 @@
/*
* Convert HAL channels to ieee80211 ones.
*/
@ -10,7 +10,7 @@
for (i = 0; i < nchan; i++) {
HAL_CHANNEL *c = &chans[i];
struct ieee80211_channel *ichan = &ic->ic_channels[i];
@@ -9822,6 +9824,7 @@
@@ -9825,6 +9827,7 @@
ic->ic_chan_non_occupy[i].tv_sec = 0;
ic->ic_chan_non_occupy[i].tv_usec = 0;
@ -18,7 +18,7 @@
IPRINTF(sc, "Channel %3d (%4d MHz) Max Tx Power %d dBm%s "
"[%d hw %d reg] Flags%s%s%s%s%s%s%s%s%s%s%s%s%"
"s%s%s%s%s%s%s%s%s%s%s%s\n",
@@ -9910,6 +9913,7 @@
@@ -9913,6 +9916,7 @@
(c->privFlags & 0x0080 ?
" PF & (1 << 7)" : "")
);

View File

@ -1,6 +1,6 @@
--- a/ath/if_ath.c
+++ b/ath/if_ath.c
@@ -8441,8 +8441,6 @@
@@ -8444,8 +8444,6 @@
ath_hal_intrset(sc->sc_ah, sc->sc_imask);
local_irq_restore(flags);
@ -9,7 +9,7 @@
if (sc->sc_softled)
ath_led_event(sc, ATH_LED_TX);
}
@@ -8489,8 +8487,6 @@
@@ -8492,8 +8490,6 @@
ath_hal_intrset(sc->sc_ah, sc->sc_imask);
local_irq_restore(flags);
@ -18,7 +18,7 @@
if (sc->sc_softled)
ath_led_event(sc, ATH_LED_TX);
}
@@ -8523,8 +8519,6 @@
@@ -8526,8 +8522,6 @@
ath_hal_intrset(sc->sc_ah, sc->sc_imask);
local_irq_restore(flags);

View File

@ -68,7 +68,7 @@
* Convert to a HAL channel description with the flags
* constrained to reflect the current operating mode.
*/
@@ -5153,6 +5177,8 @@
@@ -5156,6 +5180,8 @@
"Invoking ath_hal_txstart with sc_bhalq: %d\n",
sc->sc_bhalq);
ath_hal_txstart(ah, sc->sc_bhalq);
@ -77,7 +77,7 @@
sc->sc_stats.ast_be_xmit++; /* XXX per-VAP? */
}
@@ -5402,6 +5428,7 @@
@@ -5405,6 +5431,7 @@
ath_hal_beacontimers(ah, &bs);
sc->sc_imask |= HAL_INT_BMISS;
ath_hal_intrset(ah, sc->sc_imask);
@ -85,7 +85,7 @@
} else {
ath_hal_intrset(ah, 0);
if (reset_tsf)
@@ -5413,8 +5440,11 @@
@@ -5416,8 +5443,11 @@
*/
intval |= HAL_BEACON_ENA;
sc->sc_imask |= HAL_INT_SWBA;
@ -98,7 +98,7 @@
#ifdef ATH_SUPERG_DYNTURBO
ath_beacon_dturbo_config(vap, intval &
~(HAL_BEACON_RESET_TSF | HAL_BEACON_ENA));
@@ -8882,6 +8912,9 @@
@@ -8885,6 +8915,9 @@
/* Enter DFS wait period */
mod_timer(&sc->sc_dfs_cac_timer,
jiffies + (sc->sc_dfs_cac_period * HZ));
@ -108,7 +108,7 @@
}
/*
* re configure beacons when it is a turbo mode switch.
@@ -8991,8 +9024,11 @@
@@ -8994,8 +9027,11 @@
sc->sc_curchan.channel, sc->sc_curchan.channelFlags,
isIQdone ? "done" : "not done");
@ -122,7 +122,7 @@
}
static void
@@ -9099,7 +9135,8 @@
@@ -9102,7 +9138,8 @@
ieee80211_state_name[vap->iv_state],
ieee80211_state_name[nstate]);
@ -132,7 +132,7 @@
ath_hal_setledstate(ah, leds[nstate]); /* set LED */
netif_stop_queue(dev); /* before we do anything else */
@@ -9324,7 +9361,8 @@
@@ -9327,7 +9364,8 @@
"VAP -> DFSWAIT_PENDING \n");
/* start calibration timer with a really small value
* 1/10 sec */
@ -142,7 +142,7 @@
/* wake the receiver */
netif_wake_queue(dev);
/* don't do the other usual stuff... */
@@ -9367,7 +9405,7 @@
@@ -9370,7 +9408,7 @@
error = avp->av_newstate(vap, nstate, arg);
/* Finally, start any timers. */

View File

@ -1,6 +1,6 @@
--- a/ath/if_ath.c
+++ b/ath/if_ath.c
@@ -8923,7 +8923,7 @@
@@ -8926,7 +8926,7 @@
* re configure beacons when it is a turbo mode switch.
* HW seems to turn off beacons during turbo mode switch.
*/

View File

@ -2,7 +2,7 @@ Merged from madwifi trunk r3551, r3552
--- a/ath/if_ath.c
+++ b/ath/if_ath.c
@@ -8254,6 +8254,17 @@
@@ -8257,6 +8257,17 @@
goto bf_fail;
}

View File

@ -1,6 +1,6 @@
--- a/ath/if_ath.c
+++ b/ath/if_ath.c
@@ -8104,6 +8104,7 @@
@@ -8107,6 +8107,7 @@
ath_hal_setupxtxdesc(sc->sc_ah, ds, mrr.rate1, mrr.retries1,
mrr.rate2, mrr.retries2,
mrr.rate3, mrr.retries3);

View File

@ -1,6 +1,6 @@
--- a/ath/if_ath.c
+++ b/ath/if_ath.c
@@ -10277,11 +10277,11 @@
@@ -10280,11 +10280,11 @@
sc->sc_currates = rt;
sc->sc_curmode = mode;
/*

View File

@ -10,7 +10,7 @@
if (ar_device(sc->devid) == 5212 || ar_device(sc->devid) == 5213) {
/* set ack to be sent at low bit-rate */
/* registers taken from the OpenBSD 5212 HAL */
@@ -10792,8 +10795,13 @@
@@ -10795,8 +10798,13 @@
break;
#endif
case ATH_ACKRATE:

View File

@ -1,6 +1,6 @@
--- a/ath/if_ath.c
+++ b/ath/if_ath.c
@@ -8865,8 +8865,7 @@
@@ -8868,8 +8868,7 @@
* needed to do the reset with chanchange = AH_FALSE in order
* to receive traffic when peforming high velocity channel
* changes. */

View File

@ -114,7 +114,7 @@
ath_update_txpow(sc); /* update tx power state */
ath_radar_update(sc);
ath_setdefantenna(sc, sc->sc_defant);
@@ -4173,6 +4200,8 @@
@@ -4176,6 +4203,8 @@
if (sc->sc_nmonvaps > 0)
rfilt |= (HAL_RX_FILTER_CONTROL | HAL_RX_FILTER_BEACON |
HAL_RX_FILTER_PROBEREQ | HAL_RX_FILTER_PROM);
@ -123,7 +123,7 @@
if (sc->sc_curchan.privFlags & CHANNEL_DFS)
rfilt |= (HAL_RX_FILTER_PHYERR | HAL_RX_FILTER_PHYRADAR);
return rfilt;
@@ -6523,9 +6552,6 @@
@@ -6526,9 +6555,6 @@
rs->rs_rssi = 0;
len = rs->rs_datalen;
@ -133,7 +133,7 @@
if (rs->rs_more) {
/*
@@ -8877,9 +8903,7 @@
@@ -8880,9 +8906,7 @@
if (sc->sc_softled)
ath_hal_gpioCfgOutput(ah, sc->sc_ledpin);
@ -144,7 +144,7 @@
sc->sc_curchan = hchan;
ath_update_txpow(sc); /* update tx power state */
ath_radar_update(sc);
@@ -10656,9 +10680,54 @@
@@ -10659,9 +10683,54 @@
ATH_RP_IGNORED = 24,
ATH_RADAR_IGNORED = 25,
ATH_MAXVAPS = 26,
@ -199,7 +199,7 @@
ATH_SYSCTL_DECL(ath_sysctl_halparam, ctl, write, filp, buffer, lenp, ppos)
{
struct ath_softc *sc = ctl->extra1;
@@ -10844,6 +10913,11 @@
@@ -10847,6 +10916,11 @@
case ATH_RADAR_IGNORED:
sc->sc_radar_ignored = val;
break;
@ -211,7 +211,7 @@
default:
ret = -EINVAL;
break;
@@ -10910,6 +10984,11 @@
@@ -10913,6 +10987,11 @@
case ATH_RADAR_IGNORED:
val = sc->sc_radar_ignored;
break;
@ -223,7 +223,7 @@
default:
ret = -EINVAL;
break;
@@ -11087,6 +11166,24 @@
@@ -11090,6 +11169,24 @@
.proc_handler = ath_sysctl_halparam,
.extra2 = (void *)ATH_RADAR_IGNORED,
},

View File

@ -5,7 +5,7 @@ Signed-off-by: Felix Fietkau <nbd@openwrt.org>
--- a/ath/if_ath.c
+++ b/ath/if_ath.c
@@ -8325,6 +8325,18 @@
@@ -8328,6 +8328,18 @@
#endif
if (ts->ts_status & HAL_TXERR_XRETRY) {
sc->sc_stats.ast_tx_xretries++;

View File

@ -3,10 +3,8 @@ by some cisco systems.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Index: madwifi-trunk-r3314/net80211/ieee80211_scan_sta.c
===================================================================
--- madwifi-trunk-r3314.orig/net80211/ieee80211_scan_sta.c 2008-07-23 11:39:10.000000000 +0200
+++ madwifi-trunk-r3314/net80211/ieee80211_scan_sta.c 2008-07-24 18:24:23.000000000 +0200
--- a/net80211/ieee80211_scan_sta.c
+++ b/net80211/ieee80211_scan_sta.c
@@ -209,6 +209,19 @@
ieee80211_saveie(iep, ie);
}

View File

@ -217,7 +217,7 @@ Signed-off-by: Felix Fietkau <nbd@openwrt.org>
/* simple hash is enough for variation of macaddr */
--- a/net80211/ieee80211_output.c
+++ b/net80211/ieee80211_output.c
@@ -2140,7 +2140,7 @@
@@ -2141,7 +2141,7 @@
ieee80211_mgmt_output(ieee80211_ref_node(ni), skb, type);
if (timer)

View File

@ -7,7 +7,7 @@ Signed-off-by: Felix Fietkau <nbd@openwrt.org>
--- a/net80211/ieee80211_input.c
+++ b/net80211/ieee80211_input.c
@@ -3398,12 +3398,17 @@
@@ -3400,12 +3400,17 @@
}
/* WDS/Repeater: re-schedule software beacon timer for
@ -70,7 +70,7 @@ Signed-off-by: Felix Fietkau <nbd@openwrt.org>
if (ic->ic_roaming == IEEE80211_ROAMING_AUTO) {
#ifdef ATH_SUPERG_DYNTURBO
/*
@@ -1617,14 +1642,14 @@
@@ -1621,14 +1646,14 @@
}
/* WDS/Repeater: Start software beacon timer for STA */
@ -92,7 +92,7 @@ Signed-off-by: Felix Fietkau <nbd@openwrt.org>
--- a/net80211/ieee80211_var.h
+++ b/net80211/ieee80211_var.h
@@ -282,6 +282,7 @@
@@ -283,6 +283,7 @@
struct timer_list iv_swbmiss; /* software beacon miss timer */
u_int16_t iv_swbmiss_period; /* software beacon miss timer period */

View File

@ -16,7 +16,7 @@ Signed-off-by: Felix Fietkau <nbd@openwrt.org>
#define SIOCG80211STATS (SIOCDEVPRIVATE+2)
--- a/net80211/ieee80211_wireless.c
+++ b/net80211/ieee80211_wireless.c
@@ -2798,6 +2798,12 @@
@@ -2799,6 +2799,12 @@
case IEEE80211_PARAM_ROAM_RATE_11G:
vap->iv_roam.rate11b = value;
break;
@ -29,7 +29,7 @@ Signed-off-by: Felix Fietkau <nbd@openwrt.org>
case IEEE80211_PARAM_UAPSDINFO:
if (vap->iv_opmode == IEEE80211_M_HOSTAP) {
if (ic->ic_caps & IEEE80211_C_UAPSD) {
@@ -3183,6 +3189,12 @@
@@ -3184,6 +3190,12 @@
case IEEE80211_PARAM_ROAM_RATE_11G:
param[0] = vap->iv_roam.rate11b;
break;
@ -42,7 +42,7 @@ Signed-off-by: Felix Fietkau <nbd@openwrt.org>
case IEEE80211_PARAM_UAPSDINFO:
if (vap->iv_opmode == IEEE80211_M_HOSTAP) {
if (IEEE80211_VAP_UAPSD_ENABLED(vap))
@@ -5732,6 +5744,14 @@
@@ -5733,6 +5745,14 @@
IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "rate11g" },
{ IEEE80211_PARAM_ROAM_RATE_11G,
0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "get_rate11g" },

View File

@ -1,6 +1,6 @@
--- a/ath/if_ath.c
+++ b/ath/if_ath.c
@@ -4914,7 +4914,7 @@
@@ -4917,7 +4917,7 @@
* capability info and arrange for a mode change
* if needed.
*/

View File

@ -32,7 +32,7 @@
MODULE_PARM_DESC(autocreate, "Create ath device in "
"[sta|ap|wds|adhoc|ahdemo|monitor] mode. defaults to sta, use "
"'none' to disable");
@@ -5061,7 +5065,7 @@
@@ -5064,7 +5068,7 @@
DPRINTF(sc, ATH_DEBUG_BEACON_PROC,
"Missed %u consecutive beacons (n_beacon=%u)\n",
sc->sc_bmisscount, n_beacon);
@ -41,7 +41,7 @@
ATH_SCHEDULE_TQUEUE(&sc->sc_bstucktq, needmark);
return;
}
@@ -5217,7 +5221,7 @@
@@ -5220,7 +5224,7 @@
* check will be true, in which case return
* without resetting the driver.
*/

View File

@ -1,6 +1,6 @@
--- a/net80211/ieee80211_wireless.c
+++ b/net80211/ieee80211_wireless.c
@@ -3726,6 +3726,7 @@
@@ -3723,6 +3723,7 @@
if (vap->iv_opmode == IEEE80211_M_STA) {
struct scanlookup lookup;

View File

@ -1,6 +1,6 @@
--- a/ath/if_ath.c
+++ b/ath/if_ath.c
@@ -6321,7 +6321,7 @@
@@ -6324,7 +6324,7 @@
/* Never copy the SKB, as it is ours on the RX side, and this is the
* last process on the TX side and we only modify our own headers. */
@ -9,7 +9,7 @@
if (tskb == NULL) {
DPRINTF(sc, ATH_DEBUG_ANY,
"Dropping; ath_skb_removepad failed!\n");
@@ -6329,6 +6329,8 @@
@@ -6332,6 +6332,8 @@
}
ieee80211_input_monitor(ic, tskb, bf, tx, tsf, sc);