ar71xx: add NAND driver for the RB750

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20054 3c298f89-4303-0410-b956-a3cf2f4a3e73

target/linux/ar71xx/config-2.6.32

@@ -162,6 +162,7 @@ CONFIG_MTD_M25P80=y
 CONFIG_MTD_MYLOADER_PARTS=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_RB4XX=y
+CONFIG_MTD_NAND_RB750=y
 CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_WRT160NL_PARTS=y

target/linux/ar71xx/config-2.6.33

@@ -205,6 +205,7 @@ CONFIG_MTD_M25P80=y
 CONFIG_MTD_MYLOADER_PARTS=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_RB4XX=y
+CONFIG_MTD_NAND_RB750=y
 CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_WRT160NL_PARTS=y

target/linux/ar71xx/files/arch/mips/ar71xx/mach-rb750.c

@@ -50,12 +50,16 @@ static struct rb750_led_platform_data rb750_leds_data = {
 
 static struct platform_device rb750_leds_device = {
 	.name	= "leds-rb750",
-	.id	= -1,
 	.dev	= {
 		.platform_data = &rb750_leds_data,
 	}
 };
 
+static struct platform_device rb750_nand_device = {
+	.name	= "rb750-nand",
+	.id	= -1,
+};
+
 int rb750_latch_change(u32 mask_clr, u32 mask_set)
 {
 	static DEFINE_SPINLOCK(lock);
@@ -115,6 +119,7 @@ static void __init rb750_setup(void)
 
 	ap91_eth_init(NULL);
 	platform_device_register(&rb750_leds_device);
+	platform_device_register(&rb750_nand_device);
 }
 
 MIPS_MACHINE(AR71XX_MACH_RB_750, "750i", "MikroTik RouterBOARD 750",

target/linux/ar71xx/files/drivers/mtd/nand/rb750_nand.c

@@ -0,0 +1,360 @@
+/*
+ *  NAND flash driver for the MikroTik RouterBOARD 750
+ *
+ *  Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+#include <asm/mach-ar71xx/mach-rb750.h>
+
+#define DRV_NAME	"rb750-nand"
+#define DRV_VERSION	"0.1.0"
+#define DRV_DESC	"NAND flash driver for the RouterBOARD 750"
+
+#define RB750_NAND_IO0		BIT(RB750_GPIO_NAND_IO0)
+#define RB750_NAND_ALE		BIT(RB750_GPIO_NAND_ALE)
+#define RB750_NAND_CLE		BIT(RB750_GPIO_NAND_CLE)
+#define RB750_NAND_NRE		BIT(RB750_GPIO_NAND_NRE)
+#define RB750_NAND_NWE		BIT(RB750_GPIO_NAND_NWE)
+#define RB750_NAND_RDY		BIT(RB750_GPIO_NAND_RDY)
+#define RB750_NAND_NCE		BIT(RB750_GPIO_NAND_NCE)
+
+#define RB750_NAND_DATA_SHIFT	1
+#define RB750_NAND_DATA_BITS	(0xff << RB750_NAND_DATA_SHIFT)
+#define RB750_NAND_INPUT_BITS	(RB750_NAND_DATA_BITS | RB750_NAND_RDY)
+#define RB750_NAND_OUTPUT_BITS	(RB750_NAND_ALE | RB750_NAND_CLE | \
+				 RB750_NAND_NRE | RB750_NAND_NWE | \
+				 RB750_NAND_NCE)
+
+struct rb750_nand_info {
+	struct nand_chip	chip;
+	struct mtd_info		mtd;
+};
+
+/*
+ * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader
+ * will not be able to find the kernel that we load.
+ */
+static struct nand_ecclayout rb750_nand_ecclayout = {
+	.eccbytes	= 6,
+	.eccpos		= { 8, 9, 10, 13, 14, 15 },
+	.oobavail	= 9,
+	.oobfree	= { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
+};
+
+static struct mtd_partition rb750_nand_partitions[] = {
+	{
+		.name	= "booter",
+		.offset	= 0,
+		.size	= (256 * 1024),
+		.mask_flags = MTD_WRITEABLE,
+	}, {
+		.name	= "kernel",
+		.offset	= (256 * 1024),
+		.size	= (4 * 1024 * 1024) - (256 * 1024),
+	}, {
+		.name	= "rootfs",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static void rb750_nand_write(const u8 *buf, unsigned len)
+{
+	void __iomem *base = ar71xx_gpio_base;
+	u32 out;
+	unsigned i;
+
+	/* set data lines to output mode */
+	__raw_writel(__raw_readl(base + GPIO_REG_OE) | RB750_NAND_DATA_BITS,
+		     base + GPIO_REG_OE);
+
+	out = __raw_readl(base + GPIO_REG_OUT);
+	out &= ~(RB750_NAND_DATA_BITS | RB750_NAND_NWE);
+	for (i = 0; i != len; i++) {
+		u32 data;
+
+		data = buf[i];
+		data <<= RB750_NAND_DATA_SHIFT;
+		data |= out;
+		__raw_writel(data, base + GPIO_REG_OUT);
+
+		__raw_writel(data | RB750_NAND_NWE, base + GPIO_REG_OUT);
+		/* flush write */
+		__raw_readl(base + GPIO_REG_OUT);
+	}
+
+	/* set data lines to input mode */
+	__raw_writel(__raw_readl(base + GPIO_REG_OE) & ~RB750_NAND_DATA_BITS,
+		     base + GPIO_REG_OE);
+	/* flush write */
+	__raw_readl(base + GPIO_REG_OE);
+}
+
+static int rb750_nand_read_verify(u8 *read_buf, unsigned len,
+				  const u8 *verify_buf)
+{
+	void __iomem *base = ar71xx_gpio_base;
+	unsigned i;
+
+	for (i = 0; i < len; i++) {
+		u8 data;
+
+		/* activate RE line */
+		__raw_writel(RB750_NAND_NRE, base + GPIO_REG_CLEAR);
+		/* flush write */
+		__raw_readl(base + GPIO_REG_CLEAR);
+
+		/* read input lines */
+		data = __raw_readl(base + GPIO_REG_IN) >> RB750_NAND_DATA_SHIFT;
+
+		/* deactivate RE line */
+		__raw_writel(RB750_NAND_NRE, base + GPIO_REG_SET);
+
+		if (read_buf)
+			read_buf[i] = data;
+		else if (verify_buf && verify_buf[i] != data)
+			return -EFAULT;
+	}
+
+	return 0;
+}
+
+static void rb750_nand_select_chip(struct mtd_info *mtd, int chip)
+{
+	void __iomem *base = ar71xx_gpio_base;
+	u32 func;
+
+	func = __raw_readl(base + GPIO_REG_FUNC);
+	if (chip >= 0) {
+		/* disable latch */
+		rb750_latch_change(RB750_LVC573_LE, 0);
+
+		/* disable alternate functions */
+		ar71xx_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE,
+					   AR724X_GPIO_FUNC_SPI_EN);
+
+		/* set input mode for data lines */
+		__raw_writel(__raw_readl(base + GPIO_REG_OE) &
+			     ~RB750_NAND_INPUT_BITS,
+			     base + GPIO_REG_OE);
+
+		/* deactivate RE and WE lines */
+		__raw_writel(RB750_NAND_NRE | RB750_NAND_NWE,
+			     base + GPIO_REG_SET);
+		/* flush write */
+		(void) __raw_readl(base + GPIO_REG_SET);
+
+		/* activate CE line */
+		__raw_writel(RB750_NAND_NCE, base + GPIO_REG_CLEAR);
+	} else {
+		/* deactivate CE line */
+		__raw_writel(RB750_NAND_NCE, base + GPIO_REG_SET);
+		/* flush write */
+		(void) __raw_readl(base + GPIO_REG_SET);
+
+		__raw_writel(__raw_readl(base + GPIO_REG_OE) |
+			     RB750_NAND_IO0 | RB750_NAND_RDY,
+			     base + GPIO_REG_OE);
+
+		/* restore alternate functions */
+		ar71xx_gpio_function_setup(AR724X_GPIO_FUNC_SPI_EN,
+					   AR724X_GPIO_FUNC_JTAG_DISABLE);
+
+		/* enable latch */
+		rb750_latch_change(0, RB750_LVC573_LE);
+	}
+}
+
+static int rb750_nand_dev_ready(struct mtd_info *mtd)
+{
+	void __iomem *base = ar71xx_gpio_base;
+
+	return !!(__raw_readl(base + GPIO_REG_IN) & RB750_NAND_RDY);
+}
+
+static void rb750_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
+				unsigned int ctrl)
+{
+	if (ctrl & NAND_CTRL_CHANGE) {
+		void __iomem *base = ar71xx_gpio_base;
+		u32 t;
+
+		t = __raw_readl(base + GPIO_REG_OUT);
+
+		t &= ~(RB750_NAND_CLE | RB750_NAND_ALE);
+		t |= (ctrl & NAND_CLE) ? RB750_NAND_CLE : 0;
+		t |= (ctrl & NAND_ALE) ? RB750_NAND_ALE : 0;
+
+		__raw_writel(t, base + GPIO_REG_OUT);
+		/* flush write */
+		__raw_readl(base + GPIO_REG_OUT);
+	}
+
+	if (cmd != NAND_CMD_NONE) {
+		u8 t = cmd;
+		rb750_nand_write(&t, 1);
+	}
+}
+
+static u8 rb750_nand_read_byte(struct mtd_info *mtd)
+{
+	u8 data = 0;
+	rb750_nand_read_verify(&data, 1, NULL);
+	return data;
+}
+
+static void rb750_nand_read_buf(struct mtd_info *mtd, u8 *buf, int len)
+{
+	rb750_nand_read_verify(buf, len, NULL);
+}
+
+static void rb750_nand_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
+{
+	rb750_nand_write(buf, len);
+}
+
+static int rb750_nand_verify_buf(struct mtd_info *mtd, const u8 *buf, int len)
+{
+	return rb750_nand_read_verify(NULL, len, buf);
+}
+
+static void __init rb750_nand_gpio_init(void)
+{
+	void __iomem *base = ar71xx_gpio_base;
+	u32 out;
+
+	out = __raw_readl(base + GPIO_REG_OUT);
+
+	/* setup output levels */
+	__raw_writel(RB750_NAND_NCE | RB750_NAND_NRE | RB750_NAND_NWE,
+		     base + GPIO_REG_SET);
+
+	__raw_writel(RB750_NAND_ALE | RB750_NAND_CLE,
+		     base + GPIO_REG_CLEAR);
+
+	/* setup input lines */
+	__raw_writel(__raw_readl(base + GPIO_REG_OE) & ~(RB750_NAND_INPUT_BITS),
+		     base + GPIO_REG_OE);
+
+	/* setup output lines */
+	__raw_writel(__raw_readl(base + GPIO_REG_OE) | RB750_NAND_OUTPUT_BITS,
+		     base + GPIO_REG_OE);
+
+	rb750_latch_change(~out & RB750_NAND_IO0, out & RB750_NAND_IO0);
+}
+
+static int __init rb750_nand_probe(struct platform_device *pdev)
+{
+	struct rb750_nand_info	*info;
+	int ret;
+
+	printk(KERN_INFO DRV_DESC " version " DRV_VERSION "\n");
+
+	rb750_nand_gpio_init();
+
+	info = kzalloc(sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	info->chip.priv	= &info;
+	info->mtd.priv	= &info->chip;
+	info->mtd.owner	= THIS_MODULE;
+
+	info->chip.select_chip	= rb750_nand_select_chip;
+	info->chip.cmd_ctrl	= rb750_nand_cmd_ctrl;
+	info->chip.dev_ready	= rb750_nand_dev_ready;
+	info->chip.read_byte	= rb750_nand_read_byte;
+	info->chip.write_buf	= rb750_nand_write_buf;
+	info->chip.read_buf	= rb750_nand_read_buf;
+	info->chip.verify_buf	= rb750_nand_verify_buf;
+
+	info->chip.chip_delay	= 25;
+	info->chip.ecc.mode	= NAND_ECC_SOFT;
+	info->chip.options	|= NAND_NO_AUTOINCR;
+
+	platform_set_drvdata(pdev, info);
+
+	ret = nand_scan_ident(&info->mtd, 1);
+	if (ret) {
+		ret = -ENXIO;
+		goto err_free_info;
+	}
+
+	if (info->mtd.writesize == 512)
+		info->chip.ecc.layout = &rb750_nand_ecclayout;
+
+	ret = nand_scan_tail(&info->mtd);
+	if (ret) {
+		return -ENXIO;
+		goto err_set_drvdata;
+	}
+
+#ifdef CONFIG_MTD_PARTITIONS
+	ret = add_mtd_partitions(&info->mtd, rb750_nand_partitions,
+				 ARRAY_SIZE(rb750_nand_partitions));
+#else
+	ret = add_mtd_device(&info->mtd);
+#endif
+	if (ret)
+		goto err_release_nand;
+
+	return 0;
+
+ err_release_nand:
+	nand_release(&info->mtd);
+ err_set_drvdata:
+	platform_set_drvdata(pdev, NULL);
+ err_free_info:
+	kfree(info);
+	return ret;
+}
+
+static int __devexit rb750_nand_remove(struct platform_device *pdev)
+{
+	struct rb750_nand_info *info = platform_get_drvdata(pdev);
+
+	nand_release(&info->mtd);
+	platform_set_drvdata(pdev, NULL);
+	kfree(info);
+
+	return 0;
+}
+
+static struct platform_driver rb750_nand_driver = {
+	.probe	= rb750_nand_probe,
+	.remove	= __devexit_p(rb750_nand_remove),
+	.driver	= {
+		.name	= DRV_NAME,
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init rb750_nand_init(void)
+{
+	return platform_driver_register(&rb750_nand_driver);
+}
+
+static void __exit rb750_nand_exit(void)
+{
+	platform_driver_unregister(&rb750_nand_driver);
+}
+
+module_init(rb750_nand_init);
+module_exit(rb750_nand_exit);
+
+MODULE_DESCRIPTION(DRV_DESC);
+MODULE_VERSION(DRV_VERSION);
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
+MODULE_LICENSE("GPL v2");

target/linux/ar71xx/patches-2.6.32/208-rb750-nand-driver.patch

@@ -0,0 +1,21 @@
+--- a/drivers/mtd/nand/Kconfig
++++ b/drivers/mtd/nand/Kconfig
+@@ -486,4 +486,8 @@ config MTD_NAND_RB4XX
+ 	tristate "NAND flash driver for RouterBoard 4xx series"
+ 	depends on MTD_NAND && AR71XX_MACH_RB4XX
+ 
++config MTD_NAND_RB750
++	tristate "NAND flash driver for the RouterBoard 750"
++	depends on MTD_NAND && AR71XX_MACH_RB750
++
+ endif # MTD_NAND
+--- a/drivers/mtd/nand/Makefile
++++ b/drivers/mtd/nand/Makefile
+@@ -32,6 +32,7 @@ obj-$(CONFIG_MTD_NAND_PXA3xx)		+= pxa3xx
+ obj-$(CONFIG_MTD_NAND_TMIO)		+= tmio_nand.o
+ obj-$(CONFIG_MTD_NAND_PLATFORM)		+= plat_nand.o
+ obj-$(CONFIG_MTD_NAND_RB4XX)		+= rb4xx_nand.o
++obj-$(CONFIG_MTD_NAND_RB750)		+= rb750_nand.o
+ obj-$(CONFIG_MTD_ALAUDA)		+= alauda.o
+ obj-$(CONFIG_MTD_NAND_PASEMI)		+= pasemi_nand.o
+ obj-$(CONFIG_MTD_NAND_ORION)		+= orion_nand.o

target/linux/ar71xx/patches-2.6.33/208-rb750-nand-driver.patch

@@ -0,0 +1,21 @@
+--- a/drivers/mtd/nand/Kconfig
++++ b/drivers/mtd/nand/Kconfig
+@@ -486,4 +486,8 @@ config MTD_NAND_RB4XX
+ 	tristate "NAND flash driver for RouterBoard 4xx series"
+ 	depends on MTD_NAND && AR71XX_MACH_RB4XX
+ 
++config MTD_NAND_RB750
++	tristate "NAND flash driver for the RouterBoard 750"
++	depends on MTD_NAND && AR71XX_MACH_RB750
++
+ endif # MTD_NAND
+--- a/drivers/mtd/nand/Makefile
++++ b/drivers/mtd/nand/Makefile
+@@ -32,6 +32,7 @@ obj-$(CONFIG_MTD_NAND_PXA3xx)		+= pxa3xx
+ obj-$(CONFIG_MTD_NAND_TMIO)		+= tmio_nand.o
+ obj-$(CONFIG_MTD_NAND_PLATFORM)		+= plat_nand.o
+ obj-$(CONFIG_MTD_NAND_RB4XX)		+= rb4xx_nand.o
++obj-$(CONFIG_MTD_NAND_RB750)		+= rb750_nand.o
+ obj-$(CONFIG_MTD_ALAUDA)		+= alauda.o
+ obj-$(CONFIG_MTD_NAND_PASEMI)		+= pasemi_nand.o
+ obj-$(CONFIG_MTD_NAND_ORION)		+= orion_nand.o