ar71xx: add kernel support for the My Net Wi-Fi Range Extender device
This patch adds a new device definition for a Western Digital device. The hardware seems to be based on Qualcomm Atheros DB120 design. Patchwork: http://patchwork.openwrt.org/patch/4281/ Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> [juhosg: refresh kernel patch] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38686 3c298f89-4303-0410-b956-a3cf2f4a3e73master
Gabor Juhos
parent
69e9e7ab36
commit
8ffa1ad83f
|
|
@ -52,6 +52,7 @@ CONFIG_ATH79_MACH_JA76PF=y
|
|||
CONFIG_ATH79_MACH_JWAP003=y
|
||||
CONFIG_ATH79_MACH_MR600=y
|
||||
CONFIG_ATH79_MACH_MYNET_N600=y
|
||||
CONFIG_ATH79_MACH_MYNET_REXT=y
|
||||
CONFIG_ATH79_MACH_MZK_W04NU=y
|
||||
CONFIG_ATH79_MACH_MZK_W300NH=y
|
||||
CONFIG_ATH79_MACH_NBG460N=y
|
||||
|
|
|
|||
|
|
@ -0,0 +1,175 @@
|
|||
/*
|
||||
* WD My Net WI-FI Range Extender (Codename:Starfish db12x) board support
|
||||
*
|
||||
* Copyright (C) 2013 Christian Lamparter <chunkeey@googlemail.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2 as published
|
||||
* by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <linux/pci.h>
|
||||
#include <linux/phy.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/ath9k_platform.h>
|
||||
#include <linux/ar8216_platform.h>
|
||||
|
||||
#include <asm/mach-ath79/ar71xx_regs.h>
|
||||
|
||||
#include "common.h"
|
||||
#include "dev-ap9x-pci.h"
|
||||
#include "dev-eth.h"
|
||||
#include "dev-gpio-buttons.h"
|
||||
#include "dev-leds-gpio.h"
|
||||
#include "dev-m25p80.h"
|
||||
#include "dev-spi.h"
|
||||
#include "dev-usb.h"
|
||||
#include "dev-wmac.h"
|
||||
#include "machtypes.h"
|
||||
#include "nvram.h"
|
||||
|
||||
#define MYNET_REXT_GPIO_LED_POWER 11
|
||||
#define MYNET_REXT_GPIO_LED_ETHERNET 12
|
||||
#define MYNET_REXT_GPIO_LED_WIFI 19
|
||||
|
||||
#define MYNET_REXT_GPIO_LED_RF_QTY1 20
|
||||
#define MYNET_REXT_GPIO_LED_RF_QTY2 21
|
||||
#define MYNET_REXT_GPIO_LED_RF_QTY3 22
|
||||
|
||||
#define MYNET_REXT_GPIO_BTN_RESET 13
|
||||
#define MYNET_REXT_GPIO_BTN_WPS 15
|
||||
#define MYNET_REXT_GPIO_SW_RF 14
|
||||
|
||||
#define MYNET_REXT_GPIO_PHY_SWRST 16 /* disables Ethernet PHY */
|
||||
#define MYNET_REXT_GPIO_PHY_INT 17
|
||||
#define MYNET_REXT_GPIO_18 18
|
||||
|
||||
#define MYNET_REXT_KEYS_POLL_INTERVAL 20 /* msecs */
|
||||
#define MYNET_REXT_KEYS_DEBOUNCE_INTERVAL (3 * MYNET_REXT_KEYS_POLL_INTERVAL)
|
||||
|
||||
#define MYNET_REXT_WMAC_CALDATA_OFFSET 0x1000
|
||||
|
||||
#define MYNET_REXT_NVRAM_ADDR 0x1f7e0010
|
||||
#define MYNET_REXT_NVRAM_SIZE 0xfff0
|
||||
|
||||
#define MYNET_REXT_ART_ADDR 0x1f7f0000
|
||||
|
||||
static struct gpio_led mynet_rext_leds_gpio[] __initdata = {
|
||||
{
|
||||
.name = "wd:blue:power",
|
||||
.gpio = MYNET_REXT_GPIO_LED_POWER,
|
||||
.active_low = 0,
|
||||
},
|
||||
{
|
||||
.name = "wd:blue:wireless",
|
||||
.gpio = MYNET_REXT_GPIO_LED_WIFI,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "wd:blue:ethernet",
|
||||
.gpio = MYNET_REXT_GPIO_LED_ETHERNET,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "wd:blue:quality1",
|
||||
.gpio = MYNET_REXT_GPIO_LED_RF_QTY1,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "wd:blue:quality2",
|
||||
.gpio = MYNET_REXT_GPIO_LED_RF_QTY2,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "wd:blue:quality3",
|
||||
.gpio = MYNET_REXT_GPIO_LED_RF_QTY3,
|
||||
.active_low = 1,
|
||||
},
|
||||
};
|
||||
|
||||
static struct gpio_keys_button mynet_rext_gpio_keys[] __initdata = {
|
||||
{
|
||||
.desc = "Reset button",
|
||||
.type = EV_KEY,
|
||||
.code = KEY_RESTART,
|
||||
.debounce_interval = MYNET_REXT_KEYS_DEBOUNCE_INTERVAL,
|
||||
.gpio = MYNET_REXT_GPIO_BTN_RESET,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.desc = "WPS button",
|
||||
.type = EV_KEY,
|
||||
.code = KEY_WPS_BUTTON,
|
||||
.debounce_interval = MYNET_REXT_KEYS_DEBOUNCE_INTERVAL,
|
||||
.gpio = MYNET_REXT_GPIO_BTN_WPS,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.desc = "RF Band switch",
|
||||
.type = EV_SW,
|
||||
.code = BTN_1,
|
||||
.debounce_interval = MYNET_REXT_KEYS_DEBOUNCE_INTERVAL,
|
||||
.gpio = MYNET_REXT_GPIO_SW_RF,
|
||||
},
|
||||
};
|
||||
|
||||
static void mynet_rext_get_mac(const char *name, char *mac)
|
||||
{
|
||||
u8 *nvram = (u8 *) KSEG1ADDR(MYNET_REXT_NVRAM_ADDR);
|
||||
int err;
|
||||
|
||||
err = ath79_nvram_parse_mac_addr(nvram, MYNET_REXT_NVRAM_SIZE,
|
||||
name, mac);
|
||||
if (err)
|
||||
pr_err("no MAC address found for %s\n", name);
|
||||
}
|
||||
|
||||
static void __init mynet_rext_setup(void)
|
||||
{
|
||||
u8 *art = (u8 *) KSEG1ADDR(MYNET_REXT_ART_ADDR);
|
||||
u8 tmpmac[ETH_ALEN];
|
||||
|
||||
ath79_register_m25p80(NULL);
|
||||
|
||||
/* GPIO configuration from drivers/char/GPIO8.c */
|
||||
|
||||
ath79_gpio_output_select(MYNET_REXT_GPIO_LED_POWER,
|
||||
AR934X_GPIO_OUT_GPIO);
|
||||
ath79_gpio_output_select(MYNET_REXT_GPIO_LED_WIFI,
|
||||
AR934X_GPIO_OUT_GPIO);
|
||||
ath79_gpio_output_select(MYNET_REXT_GPIO_LED_RF_QTY1,
|
||||
AR934X_GPIO_OUT_GPIO);
|
||||
ath79_gpio_output_select(MYNET_REXT_GPIO_LED_RF_QTY2,
|
||||
AR934X_GPIO_OUT_GPIO);
|
||||
ath79_gpio_output_select(MYNET_REXT_GPIO_LED_RF_QTY3,
|
||||
AR934X_GPIO_OUT_GPIO);
|
||||
ath79_gpio_output_select(MYNET_REXT_GPIO_LED_ETHERNET,
|
||||
AR934X_GPIO_OUT_GPIO);
|
||||
ath79_register_leds_gpio(-1, ARRAY_SIZE(mynet_rext_leds_gpio),
|
||||
mynet_rext_leds_gpio);
|
||||
|
||||
ath79_register_gpio_keys_polled(-1, MYNET_REXT_KEYS_POLL_INTERVAL,
|
||||
ARRAY_SIZE(mynet_rext_gpio_keys),
|
||||
mynet_rext_gpio_keys);
|
||||
|
||||
mynet_rext_get_mac("wl0_hwaddr=", tmpmac);
|
||||
ath79_register_wmac(art + MYNET_REXT_WMAC_CALDATA_OFFSET, tmpmac);
|
||||
|
||||
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
|
||||
|
||||
ath79_register_mdio(0, 0x0);
|
||||
|
||||
/* LAN */
|
||||
mynet_rext_get_mac("et0macaddr=", ath79_eth0_data.mac_addr);
|
||||
|
||||
/* GMAC0 is connected to an external PHY on Port 4 */
|
||||
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
|
||||
ath79_eth0_data.phy_mask = BIT(4);
|
||||
ath79_eth0_pll_data.pll_1000 = 0x0e000000; /* athrs_mac.c */
|
||||
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
|
||||
ath79_register_eth(0);
|
||||
}
|
||||
|
||||
MIPS_MACHINE(ATH79_MACH_MYNET_REXT, "MYNET-REXT",
|
||||
"WD My Net Wi-Fi Range Extender", mynet_rext_setup);
|
||||
|
|
@ -0,0 +1,39 @@
|
|||
--- a/arch/mips/ath79/machtypes.h
|
||||
+++ b/arch/mips/ath79/machtypes.h
|
||||
@@ -56,6 +56,7 @@ enum ath79_mach_type {
|
||||
ATH79_MACH_MR600V2, /* OpenMesh MR600v2 */
|
||||
ATH79_MACH_MR600, /* OpenMesh MR600 */
|
||||
ATH79_MACH_MYNET_N600, /* WD My Net N600 */
|
||||
+ ATH79_MACH_MYNET_REXT, /* WD My Net Wi-Fi Range Extender */
|
||||
ATH79_MACH_MZK_W04NU, /* Planex MZK-W04NU */
|
||||
ATH79_MACH_MZK_W300NH, /* Planex MZK-W300NH */
|
||||
ATH79_MACH_NBG460N, /* Zyxel NBG460N/550N/550NH */
|
||||
--- a/arch/mips/ath79/Makefile
|
||||
+++ b/arch/mips/ath79/Makefile
|
||||
@@ -67,6 +67,7 @@ obj-$(CONFIG_ATH79_MACH_JWAP003) += mach
|
||||
obj-$(CONFIG_ATH79_MACH_HORNET_UB) += mach-hornet-ub.o
|
||||
obj-$(CONFIG_ATH79_MACH_MR600) += mach-mr600.o
|
||||
obj-$(CONFIG_ATH79_MACH_MYNET_N600) += mach-mynet-n600.o
|
||||
+obj-$(CONFIG_ATH79_MACH_MYNET_REXT) += mach-mynet-rext.o
|
||||
obj-$(CONFIG_ATH79_MACH_MZK_W04NU) += mach-mzk-w04nu.o
|
||||
obj-$(CONFIG_ATH79_MACH_MZK_W300NH) += mach-mzk-w300nh.o
|
||||
obj-$(CONFIG_ATH79_MACH_NBG460N) += mach-nbg460n.o
|
||||
--- a/arch/mips/ath79/Kconfig
|
||||
+++ b/arch/mips/ath79/Kconfig
|
||||
@@ -801,6 +801,16 @@ config ATH79_MACH_MYNET_N600
|
||||
select ATH79_DEV_WMAC
|
||||
select ATH79_NVRAM
|
||||
|
||||
+config ATH79_MACH_MYNET_REXT
|
||||
+ bool "WD My Net Wi-Fi Range Extender board support"
|
||||
+ select SOC_AR934X
|
||||
+ select ATH79_DEV_ETH
|
||||
+ select ATH79_DEV_GPIO_BUTTONS
|
||||
+ select ATH79_DEV_LEDS_GPIO
|
||||
+ select ATH79_DEV_M25P80
|
||||
+ select ATH79_DEV_WMAC
|
||||
+ select ATH79_NVRAM
|
||||
+
|
||||
config ATH79_MACH_ZCN_1523H
|
||||
bool "Zcomax ZCN-1523H support"
|
||||
select SOC_AR724X
|
||||
Loading…
Reference in New Issue