From 88f6536f5b02b5f0cbe9375b2e027d1c16edc8b7 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Tue, 17 Sep 2013 21:45:44 +0000 Subject: [PATCH] ralink: add pinctrl driver Signed-off-by: John Crispin git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38026 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- target/linux/ramips/dts/3G-6200N.dts | 25 +- target/linux/ramips/dts/3G-6200NL.dts | 25 +- target/linux/ramips/dts/3G300M.dts | 29 +- target/linux/ramips/dts/AIR3GII.dts | 20 +- target/linux/ramips/dts/ALL0239-3G.dts | 25 +- target/linux/ramips/dts/ALL0256N-4M.dts | 20 +- target/linux/ramips/dts/ALL0256N-8M.dts | 20 +- target/linux/ramips/dts/ALL5002.dts | 21 +- target/linux/ramips/dts/ALL5003.dts | 21 +- target/linux/ramips/dts/ARGUS_ATP52B.dts | 25 +- target/linux/ramips/dts/ASL26555-16M.dts | 21 +- target/linux/ramips/dts/ASL26555-8M.dts | 21 +- target/linux/ramips/dts/AWM002-4M.dtsi | 1 - target/linux/ramips/dts/AWM002-8M.dtsi | 1 - target/linux/ramips/dts/AWM002.dtsi | 25 +- target/linux/ramips/dts/BC2.dts | 26 +- target/linux/ramips/dts/BR-6425.dts | 25 +- target/linux/ramips/dts/BROADWAY.dts | 25 +- target/linux/ramips/dts/CARAMBOLA.dts | 26 +- target/linux/ramips/dts/D105.dts | 26 +- target/linux/ramips/dts/DAP-1350.dts | 25 +- target/linux/ramips/dts/DIR-300-B1.dts | 25 +- target/linux/ramips/dts/DIR-600-B1.dts | 24 +- target/linux/ramips/dts/DIR-600-B2.dts | 24 +- target/linux/ramips/dts/DIR-610-A1.dts | 27 +- target/linux/ramips/dts/DIR-615-D.dts | 25 +- target/linux/ramips/dts/DIR-615-H1.dts | 32 +- target/linux/ramips/dts/DIR-620-A1.dts | 25 +- target/linux/ramips/dts/DIR-620-D1.dts | 33 +- target/linux/ramips/dts/DIR-645.dts | 28 +- target/linux/ramips/dts/DIR-810L.dts | 24 +- target/linux/ramips/dts/ESR-9753.dts | 25 +- target/linux/ramips/dts/F5D8235_V1.dts | 16 +- target/linux/ramips/dts/F5D8235_V2.dts | 26 +- target/linux/ramips/dts/F7C027.dts | 20 +- target/linux/ramips/dts/FONERA20N.dts | 25 +- target/linux/ramips/dts/FREESTATION5.dts | 24 +- target/linux/ramips/dts/HG255D.dts | 24 +- target/linux/ramips/dts/HW550-3G.dts | 26 +- target/linux/ramips/dts/IP2202.dts | 27 +- target/linux/ramips/dts/M3.dts | 22 +- target/linux/ramips/dts/M4-4M.dts | 26 +- target/linux/ramips/dts/M4-8M.dts | 21 +- target/linux/ramips/dts/MOFI3500-3GN.dts | 22 +- target/linux/ramips/dts/MPRA1.dts | 25 +- target/linux/ramips/dts/MPRA2.dts | 25 +- target/linux/ramips/dts/MT7620a.dts | 24 +- target/linux/ramips/dts/MT7620a_MT7610e.dts | 7 +- target/linux/ramips/dts/MZK-W300NH2.dts | 25 +- target/linux/ramips/dts/NBG-419N.dts | 24 +- target/linux/ramips/dts/NW718.dts | 25 +- target/linux/ramips/dts/OMNI-EMB-HPM.dts | 30 +- target/linux/ramips/dts/OMNI-EMB.dts | 24 +- target/linux/ramips/dts/PSR-680W.dts | 25 +- target/linux/ramips/dts/PWH2004.dts | 25 +- target/linux/ramips/dts/RP-N53.dts | 28 +- target/linux/ramips/dts/RT-G32-B1.dts | 24 +- target/linux/ramips/dts/RT-N10-PLUS.dts | 21 - target/linux/ramips/dts/RT-N13U.dts | 24 +- target/linux/ramips/dts/RT-N15.dts | 4 - target/linux/ramips/dts/RTN56U.dts | 37 +- target/linux/ramips/dts/SL-R7205.dts | 24 +- target/linux/ramips/dts/TEW-691GR.dts | 27 +- target/linux/ramips/dts/TEW-692GR.dts | 35 +- target/linux/ramips/dts/UR-326N4G.dts | 25 +- target/linux/ramips/dts/UR-336UN.dts | 25 +- target/linux/ramips/dts/V11STFE.dts | 4 - target/linux/ramips/dts/V22RW-2X2.dts | 24 +- target/linux/ramips/dts/W150M.dts | 24 +- target/linux/ramips/dts/W306R_V20.dts | 24 +- target/linux/ramips/dts/W502U.dts | 24 +- target/linux/ramips/dts/WCR150GN.dts | 24 +- target/linux/ramips/dts/WHR-G300N.dts | 24 +- target/linux/ramips/dts/WL-351.dts | 26 +- target/linux/ramips/dts/WL341V3.dts | 26 +- target/linux/ramips/dts/WLI-TX4-AG300N.dts | 4 - target/linux/ramips/dts/WL_330N.dts | 24 +- target/linux/ramips/dts/WL_330N3G.dts | 24 +- target/linux/ramips/dts/WNCE2001.dts | 28 +- target/linux/ramips/dts/WR512-3GN-4M.dts | 25 +- target/linux/ramips/dts/WR512-3GN-8M.dts | 25 +- target/linux/ramips/dts/WR6202.dts | 25 +- target/linux/ramips/dts/X5.dts | 22 +- target/linux/ramips/dts/X8.dts | 22 +- target/linux/ramips/dts/XDXRN502J.dts | 25 +- target/linux/ramips/dts/mt7620a.dtsi | 74 +- target/linux/ramips/dts/rt3050.dtsi | 41 +- target/linux/ramips/dts/rt3352.dtsi | 37 +- target/linux/ramips/dts/rt3883.dtsi | 35 +- target/linux/ramips/dts/rt5350.dtsi | 52 +- target/linux/ramips/mt7620a/config-3.10 | 7 +- ...alink-add-gpio-driver-for-ralink-SoC.patch | 46 +- .../0101-MIPS-ralink-add-pinmux-driver.patch | 144 -- .../ramips/patches-3.10/0122-pinmux.patch | 1276 +++++++++++++++++ target/linux/ramips/rt305x/config-3.10 | 8 +- target/linux/ramips/rt3883/config-3.10 | 7 +- 96 files changed, 2100 insertions(+), 1608 deletions(-) delete mode 100644 target/linux/ramips/patches-3.10/0101-MIPS-ralink-add-pinmux-driver.patch create mode 100644 target/linux/ramips/patches-3.10/0122-pinmux.patch diff --git a/target/linux/ramips/dts/3G-6200N.dts b/target/linux/ramips/dts/3G-6200N.dts index 9f600276e6..dc342439ce 100644 --- a/target/linux/ramips/dts/3G-6200N.dts +++ b/target/linux/ramips/dts/3G-6200N.dts @@ -6,17 +6,13 @@ compatible = "3G-6200N", "ralink,rt3050-soc"; model = "Edimax 3g-6200n"; - palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; }; - - gpio0: gpio@600 { - status = "okay"; - }; - }; cfi@1f000000 { @@ -58,12 +54,7 @@ }; }; - ethernet@10100000 { - status = "okay"; - }; - esw@10110000 { - status = "okay"; ralink,portmap = <0x2f>; }; @@ -100,10 +91,6 @@ }; }; - wmac@10180000 { - status = "okay"; - }; - otg@101c0000 { status = "okay"; }; diff --git a/target/linux/ramips/dts/3G-6200NL.dts b/target/linux/ramips/dts/3G-6200NL.dts index 0dca09874d..265806154a 100644 --- a/target/linux/ramips/dts/3G-6200NL.dts +++ b/target/linux/ramips/dts/3G-6200NL.dts @@ -6,17 +6,13 @@ compatible = "3G-6200N", "ralink,rt3050-soc"; model = "Edimax 3g-6200n"; - palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; }; - - gpio0: gpio@600 { - status = "okay"; - }; - }; cfi@1f000000 { @@ -58,12 +54,7 @@ }; }; - ethernet@10100000 { - status = "okay"; - }; - esw@10110000 { - status = "okay"; ralink,portmap = <0x2f>; }; @@ -87,10 +78,6 @@ }; }; - wmac@10180000 { - status = "okay"; - }; - otg@101c0000 { status = "okay"; }; diff --git a/target/linux/ramips/dts/3G300M.dts b/target/linux/ramips/dts/3G300M.dts index c4d6a5d7d0..62683cc16d 100644 --- a/target/linux/ramips/dts/3G300M.dts +++ b/target/linux/ramips/dts/3G300M.dts @@ -7,17 +7,6 @@ model = "Tenda 3G300M"; palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "mdio", "sdram", "rgmii"; - ralink,gpiomux = "jtag"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - - gpio0: gpio@600 { - status = "okay"; - }; - spi@b00 { status = "okay"; m25p80@0 { @@ -54,6 +43,15 @@ }; }; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; + }; + }; + gpio-leds { compatible = "gpio-leds"; 3grouter { @@ -99,19 +97,10 @@ }; }; - ethernet@10100000 { - status = "okay"; - }; - esw@10110000 { - status = "okay"; ralink,portmap = <0x2f>; }; - wmac@10180000 { - status = "okay"; - }; - otg@101c0000 { status = "okay"; }; diff --git a/target/linux/ramips/dts/AIR3GII.dts b/target/linux/ramips/dts/AIR3GII.dts index f375a7450b..f9fcf075e3 100644 --- a/target/linux/ramips/dts/AIR3GII.dts +++ b/target/linux/ramips/dts/AIR3GII.dts @@ -7,12 +7,6 @@ model = "AirLive Air3GII"; palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - gpio0: gpio@600 { status = "okay"; }; @@ -53,12 +47,16 @@ }; }; - ethernet@10100000 { - status = "okay"; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "jtag", "uartf"; + ralink,function = "gpio"; + }; + }; }; esw@10110000 { - status = "okay"; ralink,portmap = <0x2f>; }; @@ -85,8 +83,4 @@ linux,code = <0x211>; }; }; - - wmac@10180000 { - status = "okay"; - }; }; diff --git a/target/linux/ramips/dts/ALL0239-3G.dts b/target/linux/ramips/dts/ALL0239-3G.dts index 023ccd2fa1..335aea85b3 100644 --- a/target/linux/ramips/dts/ALL0239-3G.dts +++ b/target/linux/ramips/dts/ALL0239-3G.dts @@ -6,18 +6,13 @@ compatible = "ALL0239-3G", "ralink,rt3052-soc"; model = "Allnet ALL0239-3G"; - palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "sdram", "rgmii"; - ralink,gpiomux = "mdio"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; }; - - gpio0: gpio@600 { - status = "okay"; - }; - }; cfi@1f000000 { @@ -53,10 +48,6 @@ }; }; - ethernet@10100000 { - status = "okay"; - }; - esw@10110000 { status = "okay"; ralink,portmap = <0x3e>; @@ -104,10 +95,6 @@ }; }; - wmac@10180000 { - status = "okay"; - }; - otg@101c0000 { status = "okay"; }; diff --git a/target/linux/ramips/dts/ALL0256N-4M.dts b/target/linux/ramips/dts/ALL0256N-4M.dts index 58248833cd..7351675b65 100644 --- a/target/linux/ramips/dts/ALL0256N-4M.dts +++ b/target/linux/ramips/dts/ALL0256N-4M.dts @@ -7,12 +7,6 @@ model = "Allnet ALL0256N"; palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - gpio0: gpio@600 { status = "okay"; }; @@ -53,12 +47,16 @@ }; }; - ethernet@10100000 { - status = "okay"; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; + }; }; esw@10110000 { - status = "okay"; ralink,portmap = <0x3f>; }; @@ -89,8 +87,4 @@ linux,code = <0x198>; }; }; - - wmac@10180000 { - status = "okay"; - }; }; diff --git a/target/linux/ramips/dts/ALL0256N-8M.dts b/target/linux/ramips/dts/ALL0256N-8M.dts index 974a4bd465..8c825a9154 100644 --- a/target/linux/ramips/dts/ALL0256N-8M.dts +++ b/target/linux/ramips/dts/ALL0256N-8M.dts @@ -7,12 +7,6 @@ model = "Allnet ALL0256N"; palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - gpio0: gpio@600 { status = "okay"; }; @@ -53,12 +47,16 @@ }; }; - ethernet@10100000 { - status = "okay"; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; + }; }; esw@10110000 { - status = "okay"; ralink,portmap = <0x3f>; }; @@ -89,8 +87,4 @@ linux,code = <0x198>; }; }; - - wmac@10180000 { - status = "okay"; - }; }; diff --git a/target/linux/ramips/dts/ALL5002.dts b/target/linux/ramips/dts/ALL5002.dts index 636b74c746..60c9c1fc44 100644 --- a/target/linux/ramips/dts/ALL5002.dts +++ b/target/linux/ramips/dts/ALL5002.dts @@ -7,13 +7,6 @@ model = "Allnet ALL5002"; palmbus@10000000 { - sysc@0 { - ralink,pinmux = "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; - ralink,gpiomux = "i2c"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - gpio0: gpio@600 { status = "okay"; }; @@ -54,19 +47,19 @@ }; }; - ethernet@10100000 { - status = "okay"; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; + }; }; esw@10110000 { - status = "okay"; ralink,portmap = <0x3f>; }; - wmac@10180000 { - status = "okay"; - }; - ehci@101c0000 { status = "okay"; }; diff --git a/target/linux/ramips/dts/ALL5003.dts b/target/linux/ramips/dts/ALL5003.dts index b1f28ce61b..d599e71efc 100644 --- a/target/linux/ramips/dts/ALL5003.dts +++ b/target/linux/ramips/dts/ALL5003.dts @@ -7,13 +7,6 @@ model = "Allnet ALL5003"; palmbus@10000000 { - sysc@0 { - ralink,pinmux = "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; - ralink,gpiomux = "i2c"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - gpio0: gpio@600 { status = "okay"; }; @@ -54,19 +47,19 @@ }; }; - ethernet@10100000 { - status = "okay"; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; + }; }; esw@10110000 { - status = "okay"; ralink,portmap = <0x3f>; }; - wmac@10180000 { - status = "okay"; - }; - ehci@101c0000 { status = "okay"; }; diff --git a/target/linux/ramips/dts/ARGUS_ATP52B.dts b/target/linux/ramips/dts/ARGUS_ATP52B.dts index b5c94a5f34..b8e246bb03 100644 --- a/target/linux/ramips/dts/ARGUS_ATP52B.dts +++ b/target/linux/ramips/dts/ARGUS_ATP52B.dts @@ -6,17 +6,13 @@ compatible = "ARGUS_ATP52B", "ralink,rt3052-soc"; model = "Argus ATP-52B"; - palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; }; - - gpio0: gpio@600 { - status = "okay"; - }; - }; cfi@1f000000 { @@ -79,19 +75,10 @@ }; }; - ethernet@10100000 { - status = "okay"; - }; - esw@10110000 { - status = "okay"; ralink,portmap = <0x3e>; }; - wmac@10180000 { - status = "okay"; - }; - otg@101c0000 { status = "okay"; }; diff --git a/target/linux/ramips/dts/ASL26555-16M.dts b/target/linux/ramips/dts/ASL26555-16M.dts index e9477b47d0..8bc98df160 100644 --- a/target/linux/ramips/dts/ASL26555-16M.dts +++ b/target/linux/ramips/dts/ASL26555-16M.dts @@ -7,13 +7,6 @@ model = "Alpha ASL26555"; palmbus@10000000 { - sysc@0 { - ralink,pinmux = "spi", "mdio", "uartlite", "sdram", "rgmii"; - ralink,gpiomux = "i2c", "jtag"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - gpio0: gpio@600 { status = "okay"; }; @@ -66,19 +59,19 @@ }; }; - ethernet@10100000 { - status = "okay"; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; + }; }; esw@10110000 { - status = "okay"; ralink,portmap = <0x1e>; }; - wmac@10180000 { - status = "okay"; - }; - otg@101c0000 { status = "okay"; }; diff --git a/target/linux/ramips/dts/ASL26555-8M.dts b/target/linux/ramips/dts/ASL26555-8M.dts index 0a403c195c..f1501ebf11 100644 --- a/target/linux/ramips/dts/ASL26555-8M.dts +++ b/target/linux/ramips/dts/ASL26555-8M.dts @@ -7,13 +7,6 @@ model = "Alpha ASL26555"; palmbus@10000000 { - sysc@0 { - ralink,pinmux = "spi", "mdio", "uartlite", "sdram", "rgmii"; - ralink,gpiomux = "i2c", "jtag"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - gpio0: gpio@600 { status = "okay"; }; @@ -61,19 +54,19 @@ }; }; - ethernet@10100000 { - status = "okay"; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; + }; }; esw@10110000 { - status = "okay"; ralink,portmap = <0x1e>; }; - wmac@10180000 { - status = "okay"; - }; - otg@101c0000 { status = "okay"; }; diff --git a/target/linux/ramips/dts/AWM002-4M.dtsi b/target/linux/ramips/dts/AWM002-4M.dtsi index 614b9984d8..2f6a01728f 100644 --- a/target/linux/ramips/dts/AWM002-4M.dtsi +++ b/target/linux/ramips/dts/AWM002-4M.dtsi @@ -5,7 +5,6 @@ model = "AsiaRF AWM002"; palmbus@10000000 { - spi@b00 { m25p80@0 { compatible = "mx25l3205d"; diff --git a/target/linux/ramips/dts/AWM002-8M.dtsi b/target/linux/ramips/dts/AWM002-8M.dtsi index a72ca95d07..d8e4c28690 100644 --- a/target/linux/ramips/dts/AWM002-8M.dtsi +++ b/target/linux/ramips/dts/AWM002-8M.dtsi @@ -5,7 +5,6 @@ model = "AsiaRF AWM002"; palmbus@10000000 { - spi@b00 { m25p80@0 { compatible = "mx25l6405d"; diff --git a/target/linux/ramips/dts/AWM002.dtsi b/target/linux/ramips/dts/AWM002.dtsi index 671dcff05a..e1579b540a 100644 --- a/target/linux/ramips/dts/AWM002.dtsi +++ b/target/linux/ramips/dts/AWM002.dtsi @@ -5,17 +5,6 @@ model = "AsiaRF AWM002"; palmbus@10000000 { - sysc@0 { - ralink,pinmux = "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; - ralink,gpiomux = "i2c"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - - gpio0: gpio@600 { - status = "okay"; - }; - spi@b00 { status = "okay"; m25p80@0 { @@ -50,19 +39,19 @@ }; }; - ethernet@10100000 { - status = "okay"; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "jtag", "uartf"; + ralink,function = "gpio"; + }; + }; }; esw@10110000 { - status = "okay"; ralink,portmap = <0x3f>; }; - wmac@10180000 { - status = "okay"; - }; - ehci@101c0000 { status = "okay"; }; diff --git a/target/linux/ramips/dts/BC2.dts b/target/linux/ramips/dts/BC2.dts index 8b97169ace..8877743d98 100644 --- a/target/linux/ramips/dts/BC2.dts +++ b/target/linux/ramips/dts/BC2.dts @@ -6,18 +6,13 @@ compatible = "BC2", "ralink,rt3052-soc"; model = "NexAira BC2"; - palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "mdio", "sdram", "rgmii"; - ralink,gpiomux = "jtag"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; }; - - gpio0: gpio@600 { - status = "okay"; - }; - }; cfi@1f000000 { @@ -73,19 +68,10 @@ }; }; - ethernet@10100000 { - status = "okay"; - }; - esw@10110000 { - status = "okay"; ralink,portmap = <0x2f>; }; - wmac@10180000 { - status = "okay"; - }; - otg@101c0000 { status = "okay"; }; diff --git a/target/linux/ramips/dts/BR-6425.dts b/target/linux/ramips/dts/BR-6425.dts index 7529b6b6e5..913df051af 100644 --- a/target/linux/ramips/dts/BR-6425.dts +++ b/target/linux/ramips/dts/BR-6425.dts @@ -6,17 +6,13 @@ compatible = "BR-6425", "ralink,rt3052-soc"; model = "Edimax BR-6425"; - palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; }; - - gpio0: gpio@600 { - status = "okay"; - }; - }; cfi@1f000000 { @@ -29,12 +25,7 @@ #size-cells = <1>; }; - ethernet@10100000 { - status = "okay"; - }; - esw@10110000 { - status = "okay"; ralink,portmap = <0x2f>; }; @@ -66,8 +57,4 @@ linux,code = <0xf7>; }; }; - - wmac@10180000 { - status = "okay"; - }; }; diff --git a/target/linux/ramips/dts/BROADWAY.dts b/target/linux/ramips/dts/BROADWAY.dts index a24d829a70..3f00ad75be 100644 --- a/target/linux/ramips/dts/BROADWAY.dts +++ b/target/linux/ramips/dts/BROADWAY.dts @@ -6,17 +6,13 @@ compatible = "BROADWAY", "ralink,rt3052-soc"; model = "Hauppauge Broadway"; - palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; }; - - gpio0: gpio@600 { - status = "okay"; - }; - }; cfi@1f000000 { @@ -52,12 +48,7 @@ }; }; - ethernet@10100000 { - status = "okay"; - }; - esw@10110000 { - status = "okay"; ralink,portmap = <0x3e>; }; @@ -85,10 +76,6 @@ }; }; - wmac@10180000 { - status = "okay"; - }; - otg@101c0000 { status = "okay"; }; diff --git a/target/linux/ramips/dts/CARAMBOLA.dts b/target/linux/ramips/dts/CARAMBOLA.dts index 68048edcf2..5c63e0315a 100644 --- a/target/linux/ramips/dts/CARAMBOLA.dts +++ b/target/linux/ramips/dts/CARAMBOLA.dts @@ -10,18 +10,13 @@ bootargs = "console=ttyS0,115200"; }; - palmbus@10000000 { - sysc@0 { - ralink,pinmux = "uartlite", "sdram", "rgmii"; - ralink,gpiomux = "i2c", "spi", "jtag", "mdio"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; }; - - gpio0: gpio@600 { - status = "okay"; - }; - }; cfi@1f000000 { @@ -57,19 +52,10 @@ }; }; - ethernet@10100000 { - status = "okay"; - }; - esw@10110000 { - status = "okay"; ralink,portmap = <0x3f>; }; - wmac@10180000 { - status = "okay"; - }; - otg@101c0000 { status = "okay"; }; diff --git a/target/linux/ramips/dts/D105.dts b/target/linux/ramips/dts/D105.dts index 9b1df68a1b..c4171c003d 100644 --- a/target/linux/ramips/dts/D105.dts +++ b/target/linux/ramips/dts/D105.dts @@ -6,18 +6,13 @@ compatible = "D105", "ralink,rt3050-soc"; model = "Huawei D105"; - palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "mdio", "sdram", "rgmii"; - ralink,gpiomux = "jtag"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; }; - - gpio0: gpio@600 { - status = "okay"; - }; - }; cfi@1f000000 { @@ -77,19 +72,10 @@ }; }; - ethernet@10100000 { - status = "okay"; - }; - esw@10110000 { - status = "okay"; ralink,portmap = <0x2f>; }; - wmac@10180000 { - status = "okay"; - }; - otg@101c0000 { status = "okay"; }; diff --git a/target/linux/ramips/dts/DAP-1350.dts b/target/linux/ramips/dts/DAP-1350.dts index 4eab53abe5..1fd9e9a7e5 100644 --- a/target/linux/ramips/dts/DAP-1350.dts +++ b/target/linux/ramips/dts/DAP-1350.dts @@ -10,17 +10,13 @@ bootargs = "console=ttyS0,115200"; }; - palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; }; - - gpio0: gpio@600 { - status = "okay"; - }; - }; cfi@1f000000 { @@ -62,12 +58,7 @@ }; }; - ethernet@10100000 { - status = "okay"; - }; - esw@10110000 { - status = "okay"; ralink,portmap = <0x2f>; }; @@ -114,10 +105,6 @@ }; }; - wmac@10180000 { - status = "okay"; - }; - otg@101c0000 { status = "okay"; }; diff --git a/target/linux/ramips/dts/DIR-300-B1.dts b/target/linux/ramips/dts/DIR-300-B1.dts index 0297b8cf92..8efef3c0d9 100644 --- a/target/linux/ramips/dts/DIR-300-B1.dts +++ b/target/linux/ramips/dts/DIR-300-B1.dts @@ -6,17 +6,13 @@ compatible = "DIR-300-B1", "ralink,rt3050-soc"; model = "D-Link DIR-300 B1"; - palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf"; + ralink,function = "gpio"; + }; }; - - gpio0: gpio@600 { - status = "okay"; - }; - }; cfi@1f000000 { @@ -52,12 +48,7 @@ }; }; - ethernet@10100000 { - status = "okay"; - }; - esw@10110000 { - status = "okay"; ralink,portmap = <0x2f>; }; @@ -78,10 +69,6 @@ }; }; - wmac@10180000 { - status = "okay"; - }; - gpio-leds { compatible = "gpio-leds"; status { diff --git a/target/linux/ramips/dts/DIR-600-B1.dts b/target/linux/ramips/dts/DIR-600-B1.dts index 5d78538b05..2c75465440 100644 --- a/target/linux/ramips/dts/DIR-600-B1.dts +++ b/target/linux/ramips/dts/DIR-600-B1.dts @@ -6,15 +6,12 @@ compatible = "DIR-600-B1", "ralink,rt3050-soc"; model = "D-Link DIR-600 B1"; - palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - - gpio0: gpio@600 { - status = "okay"; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf"; + ralink,function = "gpio"; + }; }; }; @@ -51,12 +48,7 @@ }; }; - ethernet@10100000 { - status = "okay"; - }; - esw@10110000 { - status = "okay"; ralink,portmap = <0x2f>; }; @@ -77,10 +69,6 @@ }; }; - wmac@10180000 { - status = "okay"; - }; - gpio-leds { compatible = "gpio-leds"; status { diff --git a/target/linux/ramips/dts/DIR-600-B2.dts b/target/linux/ramips/dts/DIR-600-B2.dts index ff15ac8439..f982ae0db7 100644 --- a/target/linux/ramips/dts/DIR-600-B2.dts +++ b/target/linux/ramips/dts/DIR-600-B2.dts @@ -6,15 +6,12 @@ compatible = "DIR-600-B2", "ralink,rt3050-soc"; model = "D-Link DIR-600 B2"; - palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - - gpio0: gpio@600 { - status = "okay"; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf"; + ralink,function = "gpio"; + }; }; }; @@ -51,12 +48,7 @@ }; }; - ethernet@10100000 { - status = "okay"; - }; - esw@10110000 { - status = "okay"; ralink,portmap = <0x2f>; }; @@ -77,10 +69,6 @@ }; }; - wmac@10180000 { - status = "okay"; - }; - gpio-leds { compatible = "gpio-leds"; status { diff --git a/target/linux/ramips/dts/DIR-610-A1.dts b/target/linux/ramips/dts/DIR-610-A1.dts index ed5606af89..26caf5f67f 100644 --- a/target/linux/ramips/dts/DIR-610-A1.dts +++ b/target/linux/ramips/dts/DIR-610-A1.dts @@ -7,16 +7,6 @@ model = "D-Link DIR-610 A1"; palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "jtag", "uartlite", "mdio", "sdram", "rgmii"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - - gpio0: gpio@600 { - status = "okay"; - }; - spi@b00 { status = "okay"; m25p80@0 { @@ -53,14 +43,21 @@ }; }; - ethernet@10100000 { - status = "okay"; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "jtag", "uartf"; + ralink,function = "gpio"; + }; + }; }; esw@10110000 { - status = "okay"; ralink,portmap = <0x1f>; ralink,led-polarity = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&phy_led_pins>; }; gpio-leds { @@ -93,8 +90,4 @@ }; }; }; - - wmac@10180000 { - status = "okay"; - }; }; diff --git a/target/linux/ramips/dts/DIR-615-D.dts b/target/linux/ramips/dts/DIR-615-D.dts index 21de0e8cc8..b27bca061b 100644 --- a/target/linux/ramips/dts/DIR-615-D.dts +++ b/target/linux/ramips/dts/DIR-615-D.dts @@ -6,17 +6,13 @@ compatible = "DIR-615-D", "ralink,rt3050-soc"; model = "D-Link DIR-615 D"; - palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf"; + ralink,function = "gpio"; + }; }; - - gpio0: gpio@600 { - status = "okay"; - }; - }; cfi@1f000000 { @@ -52,12 +48,7 @@ }; }; - ethernet@10100000 { - status = "okay"; - }; - esw@10110000 { - status = "okay"; ralink,portmap = <0x2f>; }; @@ -78,10 +69,6 @@ }; }; - wmac@10180000 { - status = "okay"; - }; - gpio-leds { compatible = "gpio-leds"; status { diff --git a/target/linux/ramips/dts/DIR-615-H1.dts b/target/linux/ramips/dts/DIR-615-H1.dts index 15adcfe72f..5cb2beb3e8 100644 --- a/target/linux/ramips/dts/DIR-615-H1.dts +++ b/target/linux/ramips/dts/DIR-615-H1.dts @@ -7,16 +7,6 @@ model = "D-Link DIR-615 H1"; palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - - gpio0: gpio@600 { - status = "okay"; - }; - spi@b00 { status = "okay"; m25p80@0 { @@ -53,12 +43,24 @@ }; }; - ethernet@10100000 { - status = "okay"; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "jtag", "uartf"; + ralink,function = "gpio"; + }; + rgmii { + ralink,group = "rgmii"; + ralink,function = "rgmii"; + }; + mdio { + ralink,group = "mdio"; + ralink,function = "mdio"; + }; + }; }; esw@10110000 { - status = "okay"; ralink,portmap = <0x2f>; }; @@ -102,8 +104,4 @@ linux,code = <0x211>; }; }; - - wmac@10180000 { - status = "okay"; - }; }; diff --git a/target/linux/ramips/dts/DIR-620-A1.dts b/target/linux/ramips/dts/DIR-620-A1.dts index 87292246e7..649b3abcc1 100644 --- a/target/linux/ramips/dts/DIR-620-A1.dts +++ b/target/linux/ramips/dts/DIR-620-A1.dts @@ -6,17 +6,13 @@ compatible = "DIR-620-A1", "ralink,rt3050-soc"; model = "D-Link DIR-620 A1"; - palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; }; - - gpio0: gpio@600 { - status = "okay"; - }; - }; cfi@1f000000 { @@ -52,12 +48,7 @@ }; }; - ethernet@10100000 { - status = "okay"; - }; - esw@10110000 { - status = "okay"; ralink,portmap = <0x2f>; }; @@ -78,10 +69,6 @@ }; }; - wmac@10180000 { - status = "okay"; - }; - gpio-leds { compatible = "gpio-leds"; status { diff --git a/target/linux/ramips/dts/DIR-620-D1.dts b/target/linux/ramips/dts/DIR-620-D1.dts index c1df99d549..71d3ec2bfd 100644 --- a/target/linux/ramips/dts/DIR-620-D1.dts +++ b/target/linux/ramips/dts/DIR-620-D1.dts @@ -7,17 +7,6 @@ model = "D-Link DIR-620 D1"; palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "mdio", "sdram", "rgmii"; - ralink,gpiomux = "jtag"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - - gpio0: gpio@600 { - status = "okay"; - }; - spi@b00 { status = "okay"; m25p80@0 { @@ -54,12 +43,24 @@ }; }; - ethernet@10100000 { - status = "okay"; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "jtag", "uartf"; + ralink,function = "gpio"; + }; + rgmii { + ralink,group = "rgmii"; + ralink,function = "rgmii"; + }; + mdio { + ralink,group = "mdio"; + ralink,function = "mdio"; + }; + }; }; esw@10110000 { - status = "okay"; ralink,portmap = <0x2f>; }; @@ -87,10 +88,6 @@ }; }; - wmac@10180000 { - status = "okay"; - }; - ehci@101c0000 { status = "okay"; }; diff --git a/target/linux/ramips/dts/DIR-645.dts b/target/linux/ramips/dts/DIR-645.dts index e5ccb40ec6..938055c8c9 100644 --- a/target/linux/ramips/dts/DIR-645.dts +++ b/target/linux/ramips/dts/DIR-645.dts @@ -7,21 +7,6 @@ model = "D-Link DIR-645"; palmbus@10000000 { - sysc@0 { - ralink,pinmux = "uartlite", "spi"; - ralink,gpiomux = "i2c", "jtag"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - - timer@100 { - status = "okay"; - }; - - gpio0: gpio@600 { - status = "okay"; - }; - gpio1: gpio@638 { status = "okay"; }; @@ -68,18 +53,23 @@ }; }; - ethernet@10100000 { - status = "okay"; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "jtag", "uartf"; + ralink,function = "gpio"; + }; + }; + }; + ethernet@10100000 { mtd-mac-address = <&factory 0x28>; port@0 { ralink,fixed-link = <1000 1 1 0>; }; - }; wmac@10180000 { - status = "okay"; ralink,5ghz = <0>; }; diff --git a/target/linux/ramips/dts/DIR-810L.dts b/target/linux/ramips/dts/DIR-810L.dts index 193771b5a6..6da0976c2b 100644 --- a/target/linux/ramips/dts/DIR-810L.dts +++ b/target/linux/ramips/dts/DIR-810L.dts @@ -7,17 +7,6 @@ model = "D-Link DIR-810L"; palmbus@10000000 { - sysc@0 { - ralink,pinmux = "spi", "uartlite", "ephy"; - ralink,gpiomux = "jtag", "mdio", "rgmii1", "rgmii1", "i2c", "wled"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - - gpio0: gpio@600 { - status = "okay"; - }; - spi@b00 { status = "okay"; @@ -79,13 +68,20 @@ }; }; - ethernet@10100000 { - status = "okay"; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "jtag", "mdio", "rgmii1", "rgmii1", "i2c", "wled", "uartf"; + ralink,function = "gpio"; + }; + }; }; gsw@10110000 { - status = "okay"; ralink,port4 = "ephy"; + + pinctrl-names = "default"; + pinctrl-0 = <&ephy_pins>; }; pcie@10140000 { diff --git a/target/linux/ramips/dts/ESR-9753.dts b/target/linux/ramips/dts/ESR-9753.dts index 5c5f0bbbe8..755196b55b 100644 --- a/target/linux/ramips/dts/ESR-9753.dts +++ b/target/linux/ramips/dts/ESR-9753.dts @@ -6,17 +6,13 @@ compatible = "ESR-9753", "ralink,rt3052-soc"; model = "Senao / EnGenius ESR-9753"; - palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; }; - - gpio0: gpio@600 { - status = "okay"; - }; - }; cfi@1f000000 { @@ -81,16 +77,7 @@ }; }; - ethernet@10100000 { - status = "okay"; - }; - esw@10110000 { - status = "okay"; ralink,portmap = <0x3e>; }; - - wmac@10180000 { - status = "okay"; - }; }; diff --git a/target/linux/ramips/dts/F5D8235_V1.dts b/target/linux/ramips/dts/F5D8235_V1.dts index 52b789b76c..36026c2326 100644 --- a/target/linux/ramips/dts/F5D8235_V1.dts +++ b/target/linux/ramips/dts/F5D8235_V1.dts @@ -9,18 +9,20 @@ model = "Belkin F5D8235 v1"; palmbus@300000 { - sysc@0 { - ralink,pinmux = "uartlite"; - ralink,gpiomux = "i2c"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - gpio0: gpio@600 { status = "okay"; }; }; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; + }; + }; + cfi@1f000000 { compatible = "cfi-flash"; reg = <0x1f000000 0x800000>; diff --git a/target/linux/ramips/dts/F5D8235_V2.dts b/target/linux/ramips/dts/F5D8235_V2.dts index 10b8037810..237709f5e4 100644 --- a/target/linux/ramips/dts/F5D8235_V2.dts +++ b/target/linux/ramips/dts/F5D8235_V2.dts @@ -6,18 +6,13 @@ compatible = "F5D8235_V2", "ralink,rt3052-soc"; model = "Belkin F5D8235 v2"; - palmbus@10000000 { - sysc@0 { - ralink,pinmux = "uartlite", "jtag", "sdram", "rgmii"; - ralink,gpiomux = "i2c", "spi", "mdio"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; }; - - gpio0: gpio@600 { - status = "okay"; - }; - }; cfi@1f000000 { @@ -51,19 +46,10 @@ }; }; - ethernet@10100000 { - status = "okay"; - }; - esw@10110000 { - status = "okay"; ralink,portmap = <0x3f>; }; - wmac@10180000 { - status = "okay"; - }; - otg@101c0000 { status = "okay"; }; diff --git a/target/linux/ramips/dts/F7C027.dts b/target/linux/ramips/dts/F7C027.dts index 91d4383812..ea716257ef 100644 --- a/target/linux/ramips/dts/F7C027.dts +++ b/target/linux/ramips/dts/F7C027.dts @@ -7,16 +7,6 @@ model = "Belkin F7C027"; palmbus@10000000 { - sysc@0 { - ralink,pinmux = "spi", "uartlite", "jtag", "sdram"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - - gpio0: gpio@600 { - status = "okay"; - }; - spi@b00 { status = "okay"; m25p80@0 { @@ -78,9 +68,13 @@ }; }; - - wmac@10180000 { - status = "okay"; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "jtag", "uartf"; + ralink,function = "gpio"; + }; + }; }; gpio-leds { diff --git a/target/linux/ramips/dts/FONERA20N.dts b/target/linux/ramips/dts/FONERA20N.dts index 38007a7bc9..31e087b5fc 100644 --- a/target/linux/ramips/dts/FONERA20N.dts +++ b/target/linux/ramips/dts/FONERA20N.dts @@ -6,17 +6,13 @@ compatible = "FONERA20N", "ralink,rt3052-soc"; model = "La Fonera 2.0N"; - palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf"; + ralink,function = "gpio"; + }; }; - - gpio0: gpio@600 { - status = "okay"; - }; - }; cfi@1f000000 { @@ -85,12 +81,7 @@ }; }; - ethernet@10100000 { - status = "okay"; - }; - esw@10110000 { - status = "okay"; ralink,portmap = <0x2f>; port@0 { @@ -120,10 +111,6 @@ }; }; - wmac@10180000 { - status = "okay"; - }; - otg@101c0000 { status = "okay"; }; diff --git a/target/linux/ramips/dts/FREESTATION5.dts b/target/linux/ramips/dts/FREESTATION5.dts index a3cc8fc97d..0ec390c4c8 100644 --- a/target/linux/ramips/dts/FREESTATION5.dts +++ b/target/linux/ramips/dts/FREESTATION5.dts @@ -10,15 +10,12 @@ bootargs = "console=ttyS0,115200"; }; - palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - - gpio0: gpio@600 { - status = "okay"; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; }; }; @@ -55,19 +52,10 @@ }; }; - ethernet@10100000 { - status = "okay"; - }; - esw@10110000 { - status = "okay"; ralink,portmap = <0x01>; }; - wmac@10180000 { - status = "okay"; - }; - otg@101c0000 { status = "okay"; }; diff --git a/target/linux/ramips/dts/HG255D.dts b/target/linux/ramips/dts/HG255D.dts index 7ecb4f36df..09d7a45105 100644 --- a/target/linux/ramips/dts/HG255D.dts +++ b/target/linux/ramips/dts/HG255D.dts @@ -6,15 +6,12 @@ compatible = "HG255D", "ralink,rt3052-soc"; model = "HuaWei HG255D"; - palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - - gpio0: gpio@600 { - status = "okay"; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; }; }; @@ -107,19 +104,10 @@ }; }; - ethernet@10100000 { - status = "okay"; - }; - esw@10110000 { - status = "okay"; ralink,portmap = <0x2f>; }; - wmac@10180000 { - status = "okay"; - }; - otg@101c0000 { status = "okay"; }; diff --git a/target/linux/ramips/dts/HW550-3G.dts b/target/linux/ramips/dts/HW550-3G.dts index 80adb0af39..d107b55396 100644 --- a/target/linux/ramips/dts/HW550-3G.dts +++ b/target/linux/ramips/dts/HW550-3G.dts @@ -6,18 +6,13 @@ compatible = "HW550-3G", "ralink,rt3052-soc"; model = "Aztech HW550-3G"; - palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "sdram", "rgmii"; - ralink,gpiomux = "mdio"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; }; - - gpio0: gpio@600 { - status = "okay"; - }; - }; cfi@1f000000 { @@ -53,12 +48,7 @@ }; }; - ethernet@10100000 { - status = "okay"; - }; - esw@10110000 { - status = "okay"; ralink,portmap = <0x3e>; }; @@ -104,10 +94,6 @@ }; }; - wmac@10180000 { - status = "okay"; - }; - otg@101c0000 { status = "okay"; }; diff --git a/target/linux/ramips/dts/IP2202.dts b/target/linux/ramips/dts/IP2202.dts index ea9f1702e6..ea5dc780a3 100644 --- a/target/linux/ramips/dts/IP2202.dts +++ b/target/linux/ramips/dts/IP2202.dts @@ -6,18 +6,13 @@ compatible = "IP2202", "ralink,rt3052-soc"; model = "Poray IP2202"; - palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "sdram", "rgmii"; - ralink,gpiomux = "mdio"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; }; - - gpio0: gpio@600 { - status = "okay"; - }; - }; cfi@1f000000 { @@ -53,12 +48,7 @@ }; }; - ethernet@10100000 { - status = "okay"; - }; - esw@10110000 { - status = "okay"; ralink,portmap = <0x2f>; }; @@ -86,11 +76,6 @@ }; }; - wmac@10180000 { - status = "okay"; - ralink,led-polarity = <0>; - }; - otg@101c0000 { status = "okay"; }; diff --git a/target/linux/ramips/dts/M3.dts b/target/linux/ramips/dts/M3.dts index 3e391b3d62..bae84ce4bf 100644 --- a/target/linux/ramips/dts/M3.dts +++ b/target/linux/ramips/dts/M3.dts @@ -7,17 +7,6 @@ model = "Poray M3"; palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "mdio", "sdram", "rgmii"; - ralink,gpiomux = "jtag"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - - gpio0: gpio@600 { - status = "okay"; - }; - spi@b00 { status = "okay"; m25p80@0 { @@ -54,12 +43,16 @@ }; }; - ethernet@10100000 { - status = "okay"; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "jtag", "uartf"; + ralink,function = "gpio"; + }; + }; }; esw@10110000 { - status = "okay"; ralink,portmap = <0x2f>; ralink,led_polarity = <1>; }; @@ -91,7 +84,6 @@ }; wmac@10180000 { - status = "okay"; ralink,mtd-eeprom = <&factory 0>; ralink,led-polarity = <1>; }; diff --git a/target/linux/ramips/dts/M4-4M.dts b/target/linux/ramips/dts/M4-4M.dts index 86bd8327c1..4522fb8019 100644 --- a/target/linux/ramips/dts/M4-4M.dts +++ b/target/linux/ramips/dts/M4-4M.dts @@ -7,16 +7,6 @@ model = "Poray M4"; palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - - gpio0: gpio@600 { - status = "okay"; - }; - spi@b00 { status = "okay"; m25p80@0 { @@ -53,12 +43,16 @@ }; }; - ethernet@10100000 { - status = "okay"; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "jtag", "uartf"; + ralink,function = "gpio"; + }; + }; }; esw@10110000 { - status = "okay"; ralink,portmap = <0x2f>; ralink,led_polarity = <1>; }; @@ -83,12 +77,6 @@ }; }; - wmac@10180000 { - status = "okay"; - ralink,mtd-eeprom = <&factory 0>; - ralink,led-polarity = <1>; - }; - ehci@101c0000 { status = "okay"; }; diff --git a/target/linux/ramips/dts/M4-8M.dts b/target/linux/ramips/dts/M4-8M.dts index d07eb4978a..c8e7ff51ff 100644 --- a/target/linux/ramips/dts/M4-8M.dts +++ b/target/linux/ramips/dts/M4-8M.dts @@ -7,16 +7,6 @@ model = "Poray M4"; palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - - gpio0: gpio@600 { - status = "okay"; - }; - spi@b00 { status = "okay"; m25p80@0 { @@ -53,12 +43,16 @@ }; }; - ethernet@10100000 { - status = "okay"; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "jtag", "uartf"; + ralink,function = "gpio"; + }; + }; }; esw@10110000 { - status = "okay"; ralink,portmap = <0x2f>; ralink,led_polarity = <1>; }; @@ -84,7 +78,6 @@ }; wmac@10180000 { - status = "okay"; ralink,mtd-eeprom = <&factory 0>; ralink,led-polarity = <1>; }; diff --git a/target/linux/ramips/dts/MOFI3500-3GN.dts b/target/linux/ramips/dts/MOFI3500-3GN.dts index 80cd727463..058b7a27a3 100644 --- a/target/linux/ramips/dts/MOFI3500-3GN.dts +++ b/target/linux/ramips/dts/MOFI3500-3GN.dts @@ -6,18 +6,13 @@ compatible = "MOFI3500-3GN", "ralink,rt3052-soc"; model = "MoFi Network MOFI3500-3GN"; - palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "sdram", "rgmii"; - ralink,gpiomux = "mdio"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; }; - - gpio0: gpio@600 { - status = "okay"; - }; - }; cfi@1f000000 { @@ -53,12 +48,7 @@ }; }; - ethernet@10100000 { - status = "okay"; - }; - esw@10110000 { - status = "okay"; ralink,portmap = <0x2f>; }; diff --git a/target/linux/ramips/dts/MPRA1.dts b/target/linux/ramips/dts/MPRA1.dts index 44363ef616..f363a573f5 100644 --- a/target/linux/ramips/dts/MPRA1.dts +++ b/target/linux/ramips/dts/MPRA1.dts @@ -7,17 +7,6 @@ model = "HAME MPR-A1"; palmbus@10000000 { - sysc@0 { - ralink,pinmux = "spi", "uartlite", "sdram"; - ralink,gpiomux = "jtag", "i2c", "mdio", "rgmii"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - - gpio0: gpio@600 { - status = "okay"; - }; - spi@b00 { status = "okay"; m25p80@0 { @@ -54,19 +43,19 @@ }; }; - ethernet@10100000 { - status = "okay"; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; + }; }; esw@10110000 { - status = "okay"; ralink,portmap = <0x2f>; }; - wmac@10180000 { - status = "okay"; - }; - ehci@101c0000 { status = "okay"; }; diff --git a/target/linux/ramips/dts/MPRA2.dts b/target/linux/ramips/dts/MPRA2.dts index b9bfdc8d4d..00c5d112e3 100644 --- a/target/linux/ramips/dts/MPRA2.dts +++ b/target/linux/ramips/dts/MPRA2.dts @@ -7,17 +7,6 @@ model = "HAME MPR-A2"; palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "mdio", "sdram", "rgmii"; - ralink,gpiomux = "jtag"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - - gpio0: gpio@600 { - status = "okay"; - }; - spi@b00 { status = "okay"; m25p80@0 { @@ -54,19 +43,19 @@ }; }; - ethernet@10100000 { - status = "okay"; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; + }; }; esw@10110000 { - status = "okay"; ralink,portmap = <0x2f>; }; - wmac@10180000 { - status = "okay"; - }; - ehci@101c0000 { status = "okay"; }; diff --git a/target/linux/ramips/dts/MT7620a.dts b/target/linux/ramips/dts/MT7620a.dts index 417370080d..a14d682912 100644 --- a/target/linux/ramips/dts/MT7620a.dts +++ b/target/linux/ramips/dts/MT7620a.dts @@ -7,17 +7,6 @@ model = "Ralink MT7620a + MT7610e evaluation board"; palmbus@10000000 { - sysc@0 { - ralink,pinmux = "spi", "uartlite", "mdio", "wled", "ephy", "rgmii1", "rgmii2"; - ralink,gpiomux = "i2c", "jtag"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - - gpio0: gpio@600 { - status = "okay"; - }; - spi@b00 { status = "okay"; @@ -55,6 +44,15 @@ }; }; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "jtag", "mdio", "rgmii1", "rgmii1", "i2c", "uartf"; + ralink,function = "gpio"; + }; + }; + }; + ethernet@10100000 { status = "okay"; @@ -88,8 +86,10 @@ }; gsw@10110000 { - status = "okay"; ralink,port4 = "gmac"; + + pinctrl-names = "default"; + pinctrl-0 = <&ephy_pins>; }; sdhci@10130000 { diff --git a/target/linux/ramips/dts/MT7620a_MT7610e.dts b/target/linux/ramips/dts/MT7620a_MT7610e.dts index 03b8043dd1..4ff8747562 100644 --- a/target/linux/ramips/dts/MT7620a_MT7610e.dts +++ b/target/linux/ramips/dts/MT7620a_MT7610e.dts @@ -6,10 +6,8 @@ compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc"; model = "Ralink MT7620A evaluation board"; - palmbus@10000000 { sysc@0 { - ralink,pinmux = "spi", "uartlite", "mdio", "wled", "ephy", "rgmii1", "rgmii2"; ralink,gpiomux = "i2c", "jtag"; ralink,uartmux = "gpio"; ralink,wdtmux = <1>; @@ -28,7 +26,7 @@ compatible = "en25q64"; reg = <0 0>; linux,modalias = "m25p80", "en25q64"; - spi-max-frequency = <10000000>; + spi-max-frequency = <1000000>; partition@0 { label = "u-boot"; @@ -58,6 +56,9 @@ ethernet@10100000 { status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&ephy_pins>; }; gsw@10110000 { diff --git a/target/linux/ramips/dts/MZK-W300NH2.dts b/target/linux/ramips/dts/MZK-W300NH2.dts index 29032b450f..78c120a5bf 100644 --- a/target/linux/ramips/dts/MZK-W300NH2.dts +++ b/target/linux/ramips/dts/MZK-W300NH2.dts @@ -6,16 +6,12 @@ compatible = "MZK-W300NH2", "ralink,rt3052-soc"; model = "Planex MZK-W300NH2"; - palmbus@10000000 { - sysc@0 { - ralink,pinmux = "uartlite", "mdio", "sdram", "rgmii"; - ralink,gpiomux = "i2c", "spi", "jtag"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - - gpio0: gpio@600 { - status = "okay"; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; }; }; @@ -58,12 +54,7 @@ }; }; - ethernet@10100000 { - status = "okay"; - }; - esw@10110000 { - status = "okay"; ralink,portmap = <0x2f>; }; @@ -104,8 +95,4 @@ linux,code = <0x100>; }; }; - - wmac@10180000 { - status = "okay"; - }; }; diff --git a/target/linux/ramips/dts/NBG-419N.dts b/target/linux/ramips/dts/NBG-419N.dts index 6948120058..c7d66c410e 100644 --- a/target/linux/ramips/dts/NBG-419N.dts +++ b/target/linux/ramips/dts/NBG-419N.dts @@ -6,15 +6,12 @@ compatible = "NBG-419N", "ralink,rt3052-soc"; model = "ZyXEL NBG-419N"; - palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - - gpio0: gpio@600 { - status = "okay"; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; }; }; @@ -51,12 +48,7 @@ }; }; - ethernet@10100000 { - status = "okay"; - }; - esw@10110000 { - status = "okay"; ralink,portmap = <0x2f>; }; @@ -88,8 +80,4 @@ linux,code = <0x211>; }; }; - - wmac@10180000 { - status = "okay"; - }; }; diff --git a/target/linux/ramips/dts/NW718.dts b/target/linux/ramips/dts/NW718.dts index 78ad1d63a8..d55f226785 100644 --- a/target/linux/ramips/dts/NW718.dts +++ b/target/linux/ramips/dts/NW718.dts @@ -7,17 +7,6 @@ model = "Netcore NW718"; palmbus@10000000 { - sysc@0 { - ralink,pinmux = "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; - ralink,gpiomux = "i2c"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - - gpio0: gpio@600 { - status = "okay"; - }; - spi@b00 { status = "okay"; m25p80@0 { @@ -54,12 +43,16 @@ }; }; - ethernet@10100000 { - status = "okay"; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; + }; }; esw@10110000 { - status = "okay"; ralink,portmap = <0x2f>; }; @@ -96,10 +89,6 @@ }; }; - wmac@10180000 { - status = "okay"; - }; - otg@101c0000 { status = "okay"; }; diff --git a/target/linux/ramips/dts/OMNI-EMB-HPM.dts b/target/linux/ramips/dts/OMNI-EMB-HPM.dts index 8148294893..9bceb00128 100644 --- a/target/linux/ramips/dts/OMNI-EMB-HPM.dts +++ b/target/linux/ramips/dts/OMNI-EMB-HPM.dts @@ -11,21 +11,6 @@ }; palmbus@10000000 { - sysc@0 { - ralink,pinmux = "uartlite", "spi"; - ralink,gpiomux = "i2c", "jtag"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - - timer@100 { - status = "okay"; - }; - - gpio0: gpio@600 { - status = "okay"; - }; - spi@b00 { status = "okay"; @@ -63,9 +48,16 @@ }; }; - ethernet@10100000 { - status = "okay"; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "jtag", "uartf"; + ralink,function = "gpio"; + }; + }; + }; + ethernet@10100000 { phy-handle = <&phy0>; phy-mode = "rgmii"; @@ -78,10 +70,6 @@ }; }; - wmac@10180000 { - status = "okay"; - }; - ehci@101c0000 { status = "okay"; }; diff --git a/target/linux/ramips/dts/OMNI-EMB.dts b/target/linux/ramips/dts/OMNI-EMB.dts index 704a5a1665..146e79b245 100644 --- a/target/linux/ramips/dts/OMNI-EMB.dts +++ b/target/linux/ramips/dts/OMNI-EMB.dts @@ -6,15 +6,12 @@ compatible = "OMNI-EMB", "ralink,rt3052-soc"; model = "Omnima MiniEMBWiFi"; - palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - - gpio0: gpio@600 { - status = "okay"; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; }; }; @@ -75,19 +72,10 @@ }; }; - ethernet@10100000 { - status = "okay"; - }; - esw@10110000 { - status = "okay"; ralink,portmap = <0x2f>; }; - wmac@10180000 { - status = "okay"; - }; - otg@101c0000 { status = "okay"; }; diff --git a/target/linux/ramips/dts/PSR-680W.dts b/target/linux/ramips/dts/PSR-680W.dts index f91eb2fe7f..ec06feee0c 100644 --- a/target/linux/ramips/dts/PSR-680W.dts +++ b/target/linux/ramips/dts/PSR-680W.dts @@ -10,16 +10,12 @@ bootargs = "console=ttyS0,115200"; }; - palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "uartlite", "sdram"; - ralink,gpiomux = "spi", "jtag", "mdio", "rgmii"; - ralink,uartmux = "i2s uartf"; - ralink,wdtmux = <1>; - }; - - gpio0: gpio@600 { - status = "okay"; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; }; }; @@ -56,12 +52,7 @@ }; }; - ethernet@10100000 { - status = "okay"; - }; - esw@10110000 { - status = "okay"; ralink,portmap = <0x3e>; }; @@ -85,10 +76,6 @@ }; }; - wmac@10180000 { - status = "okay"; - }; - otg@101c0000 { status = "okay"; }; diff --git a/target/linux/ramips/dts/PWH2004.dts b/target/linux/ramips/dts/PWH2004.dts index d526e836db..bee5e0f266 100644 --- a/target/linux/ramips/dts/PWH2004.dts +++ b/target/linux/ramips/dts/PWH2004.dts @@ -6,17 +6,13 @@ compatible = "PWH2004", "ralink,rt3052-soc"; model = "Prolink PWH2004"; - palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; }; - - gpio0: gpio@600 { - status = "okay"; - }; - }; cfi@1f000000 { @@ -76,16 +72,7 @@ }; }; - ethernet@10100000 { - status = "okay"; - }; - esw@10110000 { - status = "okay"; ralink,portmap = <0x2f>; }; - - wmac@10180000 { - status = "okay"; - }; }; diff --git a/target/linux/ramips/dts/RP-N53.dts b/target/linux/ramips/dts/RP-N53.dts index c1de105423..e13c3af194 100644 --- a/target/linux/ramips/dts/RP-N53.dts +++ b/target/linux/ramips/dts/RP-N53.dts @@ -7,17 +7,6 @@ model = "Asus RP-N53"; palmbus@10000000 { - sysc@0 { - ralink,pinmux = "spi", "uartlite", "wled", "ephy", "i2c"; - ralink,gpiomux = "jtag", "mdio", "rgmii1", "rgmii1"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - - gpio0: gpio@600 { - status = "okay"; - }; - gpio1: gpio@638 { status = "okay"; }; @@ -63,17 +52,24 @@ }; }; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "jtag", "mdio", "rgmii1", "rgmii1", "i2c", "uartf"; + ralink,function = "gpio"; + }; + }; + }; + codec { compatible = "ralink,mt7620-audio"; }; - ethernet@10100000 { - status = "okay"; - }; - gsw@10110000 { - status = "okay"; ralink,port4 = "ephy"; + + pinctrl-names = "default"; + pinctrl-0 = <&ephy_pins>; }; pcie@10140000 { diff --git a/target/linux/ramips/dts/RT-G32-B1.dts b/target/linux/ramips/dts/RT-G32-B1.dts index c03a7ba5b7..86abc9ca66 100644 --- a/target/linux/ramips/dts/RT-G32-B1.dts +++ b/target/linux/ramips/dts/RT-G32-B1.dts @@ -7,16 +7,6 @@ model = "Asus RT-G32 B1"; palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - - gpio0: gpio@600 { - status = "okay"; - }; - spi@b00 { status = "okay"; m25p80@0 { @@ -53,12 +43,16 @@ }; }; - ethernet@10100000 { - status = "okay"; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; + }; }; esw@10110000 { - status = "okay"; ralink,portmap = <0x2f>; }; @@ -78,8 +72,4 @@ linux,code = <0x211>; }; }; - - wmac@10180000 { - status = "okay"; - }; }; diff --git a/target/linux/ramips/dts/RT-N10-PLUS.dts b/target/linux/ramips/dts/RT-N10-PLUS.dts index 2f070b7419..0606ccb245 100644 --- a/target/linux/ramips/dts/RT-N10-PLUS.dts +++ b/target/linux/ramips/dts/RT-N10-PLUS.dts @@ -6,18 +6,6 @@ compatible = "RT-N10-PLUS", "ralink,rt3050-soc"; model = "Asus RT-N10+"; - palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - - gpio0: gpio@600 { - status = "okay"; - }; - }; - cfi@1f000000 { compatible = "cfi-flash"; reg = <0x1f000000 0x800000>; @@ -51,12 +39,7 @@ }; }; - ethernet@10100000 { - status = "okay"; - }; - esw@10110000 { - status = "okay"; ralink,portmap = <0x3e>; }; @@ -84,8 +67,4 @@ linux,code = <0x211>; }; }; - - wmac@10180000 { - status = "okay"; - }; }; diff --git a/target/linux/ramips/dts/RT-N13U.dts b/target/linux/ramips/dts/RT-N13U.dts index 2e1a62cdc2..b6a649ccdb 100644 --- a/target/linux/ramips/dts/RT-N13U.dts +++ b/target/linux/ramips/dts/RT-N13U.dts @@ -6,15 +6,12 @@ compatible = "RT-N13U", "ralink,rt3052-soc"; model = "Asus RT-N13U"; - palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - - gpio0: gpio@600 { - status = "okay"; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; }; }; @@ -85,19 +82,10 @@ }; }; - ethernet@10100000 { - status = "okay"; - }; - esw@10110000 { - status = "okay"; ralink,portmap = <0x2f>; }; - wmac@10180000 { - status = "okay"; - }; - otg@101c0000 { status = "okay"; }; diff --git a/target/linux/ramips/dts/RT-N15.dts b/target/linux/ramips/dts/RT-N15.dts index 8351449ea1..0b9d0d9f54 100644 --- a/target/linux/ramips/dts/RT-N15.dts +++ b/target/linux/ramips/dts/RT-N15.dts @@ -59,10 +59,6 @@ }; }; - wmac@480000 { - status = "okay"; - }; - rtl8366s { compatible = "realtek,rtl8366s"; gpio-sda = <&gpio0 1 0>; diff --git a/target/linux/ramips/dts/RTN56U.dts b/target/linux/ramips/dts/RTN56U.dts index 9c36af5721..6dfe3f480d 100644 --- a/target/linux/ramips/dts/RTN56U.dts +++ b/target/linux/ramips/dts/RTN56U.dts @@ -7,30 +7,21 @@ model = "Asus RT-N56U"; palmbus@10000000 { - sysc@0 { - ralink,pinmux = "uartlite"; - ralink,gpiomux = "i2c", "jtag"; - ralink,uartmux = "gpio"; - ralink,pcimux = "pci-fnc"; - ralink,wdtmux = <0>; - }; - - timer@100 { - status = "okay"; - }; - - gpio0: gpio@600 { - status = "okay"; - }; - gpio1: gpio@638 { status = "okay"; }; }; - ethernet@10100000 { - status = "okay"; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "spi", "i2c", "jtag", "uartf"; + ralink,function = "gpio"; + }; + }; + }; + ethernet@10100000 { port@0 { ralink,fixed-link = <1000 1 1 1>; }; @@ -39,6 +30,15 @@ pci@10140000 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pci_pins>; + pci_pins: pci { + pci { + ralink,group = "pci"; + ralink,function = "pci-fnc"; + }; + }; + host-bridge { pci-bridge@1 { status = "okay"; @@ -47,7 +47,6 @@ }; wmac@10180000 { - status = "okay"; ralink,2ghz = <0>; }; diff --git a/target/linux/ramips/dts/SL-R7205.dts b/target/linux/ramips/dts/SL-R7205.dts index 8f1fe851f2..589fd10fa2 100644 --- a/target/linux/ramips/dts/SL-R7205.dts +++ b/target/linux/ramips/dts/SL-R7205.dts @@ -6,15 +6,12 @@ compatible = "SL-R7205", "ralink,rt3052-soc"; model = "Skyline SL-R7205 Wireless 3G Router"; - palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - - gpio0: gpio@600 { - status = "okay"; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; }; }; @@ -51,12 +48,7 @@ }; }; - ethernet@10100000 { - status = "okay"; - }; - esw@10110000 { - status = "okay"; ralink,portmap = <0x3e>; }; @@ -85,10 +77,6 @@ }; }; - wmac@10180000 { - status = "okay"; - }; - otg@101c0000 { status = "okay"; }; diff --git a/target/linux/ramips/dts/TEW-691GR.dts b/target/linux/ramips/dts/TEW-691GR.dts index 002719583b..98d45fc530 100644 --- a/target/linux/ramips/dts/TEW-691GR.dts +++ b/target/linux/ramips/dts/TEW-691GR.dts @@ -7,29 +7,21 @@ model = "TRENDnet TEW-691GR"; palmbus@10000000 { - sysc@0 { - ralink,pinmux = "uartlite"; - ralink,gpiomux = "i2c", "jtag"; - ralink,uartmux = "gpio"; - ralink,pcimux = "pci-fnc"; - ralink,wdtmux = <1>; - }; - - timer@100 { - status = "okay"; - }; - - gpio0: gpio@600 { - status = "okay"; - }; - gpio1: gpio@638 { status = "okay"; }; }; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "spi", "i2c", "jtag", "uartf"; + ralink,function = "gpio"; + }; + }; + }; + ethernet@10100000 { - status = "okay"; port@0 { phy-handle = <&phy0>; phy-mode = "rgmii"; @@ -44,7 +36,6 @@ }; wmac@10180000 { - status = "okay"; ralink,5ghz = <0>; }; diff --git a/target/linux/ramips/dts/TEW-692GR.dts b/target/linux/ramips/dts/TEW-692GR.dts index eee4b2af2d..6c07c7760f 100644 --- a/target/linux/ramips/dts/TEW-692GR.dts +++ b/target/linux/ramips/dts/TEW-692GR.dts @@ -7,27 +7,20 @@ model = "TRENDnet TEW-692GR"; palmbus@10000000 { - sysc@0 { - ralink,pinmux = "uartlite"; - ralink,gpiomux = "i2c", "jtag", "spi"; - ralink,uartmux = "gpio"; - ralink,pcimux = "pci-fnc"; - ralink,wdtmux = <1>; - }; - - timer@100 { - status = "okay"; - }; - - gpio0: gpio@600 { - status = "okay"; - }; - gpio1: gpio@638 { status = "okay"; }; }; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "spi", "i2c", "jtag", "uartf"; + ralink,function = "gpio"; + }; + }; + }; + ethernet@10100000 { status = "okay"; port@0 { @@ -46,6 +39,15 @@ pci@10140000 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pci_pins>; + pci_pins: pci { + pci { + ralink,group = "pci"; + ralink,function = "pci-fnc"; + }; + }; + host-bridge { pci-bridge@1 { status = "okay"; @@ -54,7 +56,6 @@ }; wmac@10180000 { - status = "okay"; ralink,5ghz = <0>; }; diff --git a/target/linux/ramips/dts/UR-326N4G.dts b/target/linux/ramips/dts/UR-326N4G.dts index 6bb360d9d7..d97ca05ef9 100644 --- a/target/linux/ramips/dts/UR-326N4G.dts +++ b/target/linux/ramips/dts/UR-326N4G.dts @@ -6,16 +6,12 @@ compatible = "UR-326N4G", "ralink,rt3052-soc"; model = "UR-326N4G Wireless N router"; - palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "sdram", "rgmii"; - ralink,gpiomux = "mdio"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - - gpio0: gpio@600 { - status = "okay"; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; }; }; @@ -52,12 +48,7 @@ }; }; - ethernet@10100000 { - status = "okay"; - }; - esw@10110000 { - status = "okay"; ralink,portmap = <0x2f>; }; @@ -102,10 +93,6 @@ }; }; - wmac@10180000 { - status = "okay"; - }; - otg@101c0000 { status = "okay"; }; diff --git a/target/linux/ramips/dts/UR-336UN.dts b/target/linux/ramips/dts/UR-336UN.dts index a5c2841214..b1377036cc 100644 --- a/target/linux/ramips/dts/UR-336UN.dts +++ b/target/linux/ramips/dts/UR-336UN.dts @@ -6,16 +6,12 @@ compatible = "UR-336UN", "ralink,rt3052-soc"; model = "UR-336UN Wireless N router"; - palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "sdram", "rgmii"; - ralink,gpiomux = "mdio"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - - gpio0: gpio@600 { - status = "okay"; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; }; }; @@ -29,12 +25,7 @@ #size-cells = <1>; }; - ethernet@10100000 { - status = "okay"; - }; - esw@10110000 { - status = "okay"; ralink,portmap = <0x2f>; }; @@ -79,10 +70,6 @@ }; }; - wmac@10180000 { - status = "okay"; - }; - otg@101c0000 { status = "okay"; }; diff --git a/target/linux/ramips/dts/V11STFE.dts b/target/linux/ramips/dts/V11STFE.dts index 20cbaea49c..54ead081dd 100644 --- a/target/linux/ramips/dts/V11STFE.dts +++ b/target/linux/ramips/dts/V11STFE.dts @@ -24,10 +24,6 @@ status = "okay"; }; - wmac@480000 { - status = "okay"; - }; - pci@10140000 { status = "okay"; diff --git a/target/linux/ramips/dts/V22RW-2X2.dts b/target/linux/ramips/dts/V22RW-2X2.dts index a4f8c3c77f..99e748e78d 100644 --- a/target/linux/ramips/dts/V22RW-2X2.dts +++ b/target/linux/ramips/dts/V22RW-2X2.dts @@ -6,15 +6,12 @@ compatible = "V22RW-2X2", "ralink,rt3052-soc"; model = "Ralink AP-RT3052-V22RW-2X2"; - palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - - gpio0: gpio@600 { - status = "okay"; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; }; }; @@ -51,12 +48,7 @@ }; }; - ethernet@10100000 { - status = "okay"; - }; - esw@10110000 { - status = "okay"; ralink,portmap = <0x2f>; }; @@ -89,10 +81,6 @@ }; }; - wmac@10180000 { - status = "okay"; - }; - otg@101c0000 { status = "okay"; }; diff --git a/target/linux/ramips/dts/W150M.dts b/target/linux/ramips/dts/W150M.dts index 94f1960641..76ad658437 100644 --- a/target/linux/ramips/dts/W150M.dts +++ b/target/linux/ramips/dts/W150M.dts @@ -6,15 +6,12 @@ compatible = "3G300M", "ralink,rt3050-soc"; model = "Tenda 3G300M"; - palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "mdio", "sdram", "rgmii", "jtag"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - - gpio0: gpio@600 { - status = "okay"; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; }; }; @@ -96,16 +93,7 @@ }; }; - ethernet@10100000 { - status = "okay"; - }; - esw@10110000 { - status = "okay"; ralink,portmap = <0x2f>; }; - - wmac@10180000 { - status = "okay"; - }; }; diff --git a/target/linux/ramips/dts/W306R_V20.dts b/target/linux/ramips/dts/W306R_V20.dts index f5b3414442..16d9ad4c3a 100644 --- a/target/linux/ramips/dts/W306R_V20.dts +++ b/target/linux/ramips/dts/W306R_V20.dts @@ -39,24 +39,16 @@ }; }; - palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; }; - - gpio0: gpio@600 { - status = "okay"; - }; - }; - - ethernet@10100000 { - status = "okay"; }; esw@10110000 { - status = "okay"; ralink,portmap = <0x3e>; }; @@ -83,8 +75,4 @@ linux,code = <0x198>; }; }; - - wmac@10180000 { - status = "okay"; - }; }; diff --git a/target/linux/ramips/dts/W502U.dts b/target/linux/ramips/dts/W502U.dts index 89ddc79407..54e8d58ed2 100644 --- a/target/linux/ramips/dts/W502U.dts +++ b/target/linux/ramips/dts/W502U.dts @@ -10,15 +10,12 @@ bootargs = "console=ttyS0,115200"; }; - palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - - gpio0: gpio@600 { - status = "okay"; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; }; }; @@ -55,12 +52,7 @@ }; }; - ethernet@10100000 { - status = "okay"; - }; - esw@10110000 { - status = "okay"; ralink,portmap = <0x3e>; }; @@ -93,10 +85,6 @@ }; }; - wmac@10180000 { - status = "okay"; - }; - otg@101c0000 { status = "okay"; }; diff --git a/target/linux/ramips/dts/WCR150GN.dts b/target/linux/ramips/dts/WCR150GN.dts index 380af7d558..601883d24d 100644 --- a/target/linux/ramips/dts/WCR150GN.dts +++ b/target/linux/ramips/dts/WCR150GN.dts @@ -6,15 +6,12 @@ compatible = "WCR150GN", "ralink,rt3052-soc"; model = "Sparklan WCR-150GN"; - palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - - gpio0: gpio@600 { - status = "okay"; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; }; }; @@ -80,19 +77,10 @@ }; }; - ethernet@10100000 { - status = "okay"; - }; - esw@10110000 { - status = "okay"; ralink,portmap = <0x2f>; }; - wmac@10180000 { - status = "okay"; - }; - otg@101c0000 { status = "okay"; }; diff --git a/target/linux/ramips/dts/WHR-G300N.dts b/target/linux/ramips/dts/WHR-G300N.dts index bd18f4cdfb..8cec31e033 100644 --- a/target/linux/ramips/dts/WHR-G300N.dts +++ b/target/linux/ramips/dts/WHR-G300N.dts @@ -6,15 +6,12 @@ compatible = "WHR-G300N", "ralink,rt3052-soc"; model = "Buffalo WHR-G300N"; - palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - - gpio0: gpio@600 { - status = "okay"; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; }; }; @@ -28,12 +25,7 @@ #size-cells = <1>; }; - ethernet@10100000 { - status = "okay"; - }; - esw@10110000 { - status = "okay"; ralink,portmap = <0x2f>; }; @@ -79,8 +71,4 @@ linux,code = <0x103>; }; }; - - wmac@10180000 { - status = "okay"; - }; }; diff --git a/target/linux/ramips/dts/WL-351.dts b/target/linux/ramips/dts/WL-351.dts index f9e0595f11..bc122943d4 100644 --- a/target/linux/ramips/dts/WL-351.dts +++ b/target/linux/ramips/dts/WL-351.dts @@ -6,18 +6,13 @@ compatible = "WL-351", "ralink,rt3052-soc"; model = "Sitecom WL-351 v1 002"; - palmbus@10000000 { - sysc@0 { - ralink,pinmux = "uartlite", "jtag", "sdram", "rgmii"; - ralink,gpiomux = "i2c", "spi", "mdio"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; }; - - gpio0: gpio@600 { - status = "okay"; - }; - }; cfi@1f000000 { @@ -53,12 +48,7 @@ }; }; - ethernet@10100000 { - status = "okay"; - }; - esw@10110000 { - status = "okay"; ralink,portmap = <0x3f>; ralink,fct2 = <0x0002500c>; /* @@ -70,10 +60,6 @@ ralink,fpa2 = <0x1f003fff>; }; - wmac@10180000 { - status = "okay"; - }; - otg@101c0000 { status = "okay"; }; diff --git a/target/linux/ramips/dts/WL341V3.dts b/target/linux/ramips/dts/WL341V3.dts index 09ef844957..70317c7eee 100644 --- a/target/linux/ramips/dts/WL341V3.dts +++ b/target/linux/ramips/dts/WL341V3.dts @@ -6,18 +6,6 @@ compatible = "WL341V3", "ralink,rt3052-soc"; model = "Sitecom WL-341 v3"; - palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - - gpio0: gpio@600 { - status = "okay"; - }; - }; - cfi@1f000000 { compatible = "cfi-flash"; reg = <0x1f000000 0x800000>; @@ -51,12 +39,16 @@ }; }; - ethernet@10100000 { - status = "okay"; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; + }; }; esw@10110000 { - status = "okay"; ralink,portmap = <0x3e>; }; @@ -109,10 +101,6 @@ }; }; - wmac@10180000 { - status = "okay"; - }; - otg@101c0000 { status = "okay"; }; diff --git a/target/linux/ramips/dts/WLI-TX4-AG300N.dts b/target/linux/ramips/dts/WLI-TX4-AG300N.dts index 2296c3fc07..62c2a799a6 100644 --- a/target/linux/ramips/dts/WLI-TX4-AG300N.dts +++ b/target/linux/ramips/dts/WLI-TX4-AG300N.dts @@ -58,10 +58,6 @@ }; }; - wmac@480000 { - status = "okay"; - }; - gpio-keys-polled { compatible = "gpio-keys-polled"; #address-cells = <1>; diff --git a/target/linux/ramips/dts/WL_330N.dts b/target/linux/ramips/dts/WL_330N.dts index 1063c1eaf8..4fc4368c3f 100644 --- a/target/linux/ramips/dts/WL_330N.dts +++ b/target/linux/ramips/dts/WL_330N.dts @@ -7,16 +7,6 @@ model = "Asus WL-330N"; palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - - gpio0: gpio@600 { - status = "okay"; - }; - spi@b00 { status = "okay"; m25p80@0 { @@ -53,12 +43,16 @@ }; }; - ethernet@10100000 { - status = "okay"; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; + }; }; esw@10110000 { - status = "okay"; ralink,portmap = <0x3e>; }; @@ -90,8 +84,4 @@ linux,code = <0x198>; }; }; - - wmac@10180000 { - status = "okay"; - }; }; diff --git a/target/linux/ramips/dts/WL_330N3G.dts b/target/linux/ramips/dts/WL_330N3G.dts index 83e83fa214..1c88ed31aa 100644 --- a/target/linux/ramips/dts/WL_330N3G.dts +++ b/target/linux/ramips/dts/WL_330N3G.dts @@ -7,16 +7,6 @@ model = "Asus WL-330N3G"; palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - - gpio0: gpio@600 { - status = "okay"; - }; - spi@b00 { status = "okay"; m25p80@0 { @@ -53,12 +43,16 @@ }; }; - ethernet@10100000 { - status = "okay"; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; + }; }; esw@10110000 { - status = "okay"; ralink,portmap = <0x3e>; }; @@ -95,10 +89,6 @@ }; }; - wmac@10180000 { - status = "okay"; - }; - otg@101c0000 { status = "okay"; }; diff --git a/target/linux/ramips/dts/WNCE2001.dts b/target/linux/ramips/dts/WNCE2001.dts index 3e467a7b04..bbf6625bf6 100644 --- a/target/linux/ramips/dts/WNCE2001.dts +++ b/target/linux/ramips/dts/WNCE2001.dts @@ -11,17 +11,6 @@ }; palmbus@10000000 { - sysc@0 { - ralink,pinmux = "spi", "uartlite", "jtag", "sdram"; - ralink,gpiomux = "i2c", "mdio", "rgmii"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - - gpio0: gpio@600 { - status = "okay"; - }; - spi@b00 { status = "okay"; m25p80@0 { @@ -75,16 +64,13 @@ }; }; - ethernet@10100000 { - status = "okay"; - }; - - esw@10110000 { - status = "okay"; - }; - - wmac@10180000 { - status = "okay"; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; + }; }; gpio-leds { diff --git a/target/linux/ramips/dts/WR512-3GN-4M.dts b/target/linux/ramips/dts/WR512-3GN-4M.dts index cef7464d45..fccd04aed9 100644 --- a/target/linux/ramips/dts/WR512-3GN-4M.dts +++ b/target/linux/ramips/dts/WR512-3GN-4M.dts @@ -6,16 +6,12 @@ compatible = "WR512-3GN", "ralink,rt3052-soc"; model = "WR512-3GN-like router"; - palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "sdram", "rgmii"; - ralink,gpiomux = "mdio"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - - gpio0: gpio@600 { - status = "okay"; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; }; }; @@ -52,12 +48,7 @@ }; }; - ethernet@10100000 { - status = "okay"; - }; - esw@10110000 { - status = "okay"; ralink,portmap = <0x2f>; }; @@ -102,10 +93,6 @@ }; }; - wmac@10180000 { - status = "okay"; - }; - otg@101c0000 { status = "okay"; }; diff --git a/target/linux/ramips/dts/WR512-3GN-8M.dts b/target/linux/ramips/dts/WR512-3GN-8M.dts index 9325dbb877..01da52340e 100644 --- a/target/linux/ramips/dts/WR512-3GN-8M.dts +++ b/target/linux/ramips/dts/WR512-3GN-8M.dts @@ -6,16 +6,12 @@ compatible = "WR512-3GN", "ralink,rt3052-soc"; model = "WR512-3GN-like router"; - palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "sdram", "rgmii"; - ralink,gpiomux = "mdio"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - - gpio0: gpio@600 { - status = "okay"; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; }; }; @@ -52,12 +48,7 @@ }; }; - ethernet@10100000 { - status = "okay"; - }; - esw@10110000 { - status = "okay"; ralink,portmap = <0x2f>; }; @@ -102,10 +93,6 @@ }; }; - wmac@10180000 { - status = "okay"; - }; - otg@101c0000 { status = "okay"; }; diff --git a/target/linux/ramips/dts/WR6202.dts b/target/linux/ramips/dts/WR6202.dts index a970849e31..ed3e70851d 100644 --- a/target/linux/ramips/dts/WR6202.dts +++ b/target/linux/ramips/dts/WR6202.dts @@ -10,17 +10,13 @@ bootargs = "console=ttyS0,115200"; }; - palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; }; - - gpio0: gpio@600 { - status = "okay"; - }; - }; gpio-leds { @@ -85,19 +81,10 @@ }; }; - ethernet@10100000 { - status = "okay"; - }; - esw@10110000 { - status = "okay"; ralink,portmap = <0x3e>; }; - wmac@10180000 { - status = "okay"; - }; - otg@101c0000 { status = "okay"; }; diff --git a/target/linux/ramips/dts/X5.dts b/target/linux/ramips/dts/X5.dts index d9e963239f..0a4f1b3684 100644 --- a/target/linux/ramips/dts/X5.dts +++ b/target/linux/ramips/dts/X5.dts @@ -7,17 +7,6 @@ model = "Poray X5"; palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "mdio", "sdram", "rgmii"; - ralink,gpiomux = "jtag"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - - gpio0: gpio@600 { - status = "okay"; - }; - spi@b00 { status = "okay"; m25p80@0 { @@ -54,12 +43,16 @@ }; }; - ethernet@10100000 { - status = "okay"; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "jtag", "uartf"; + ralink,function = "gpio"; + }; + }; }; esw@10110000 { - status = "okay"; ralink,portmap = <0x2f>; ralink,led_polarity = <1>; }; @@ -118,7 +111,6 @@ }; wmac@10180000 { - status = "okay"; ralink,mtd-eeprom = <&factory 0>; ralink,led-polarity = <1>; }; diff --git a/target/linux/ramips/dts/X8.dts b/target/linux/ramips/dts/X8.dts index e7b13ca63d..b7591dec20 100644 --- a/target/linux/ramips/dts/X8.dts +++ b/target/linux/ramips/dts/X8.dts @@ -7,17 +7,6 @@ model = "Poray X8"; palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "mdio", "sdram", "rgmii"; - ralink,gpiomux = "jtag"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - - gpio0: gpio@600 { - status = "okay"; - }; - spi@b00 { status = "okay"; m25p80@0 { @@ -54,12 +43,16 @@ }; }; - ethernet@10100000 { - status = "okay"; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "jtag", "uartf"; + ralink,function = "gpio"; + }; + }; }; esw@10110000 { - status = "okay"; ralink,portmap = <0x2f>; ralink,led_polarity = <1>; }; @@ -85,7 +78,6 @@ }; wmac@10180000 { - status = "okay"; ralink,mtd-eeprom = <&factory 0>; ralink,led-polarity = <1>; }; diff --git a/target/linux/ramips/dts/XDXRN502J.dts b/target/linux/ramips/dts/XDXRN502J.dts index 3df097cde7..28670055fd 100644 --- a/target/linux/ramips/dts/XDXRN502J.dts +++ b/target/linux/ramips/dts/XDXRN502J.dts @@ -6,16 +6,12 @@ compatible = "XDXRN502J", "ralink,rt3052-soc"; model = "XDX RN502J"; - palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "sdram", "rgmii"; - ralink,gpiomux = "mdio"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - - gpio0: gpio@600 { - status = "okay"; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; }; }; @@ -52,12 +48,7 @@ }; }; - ethernet@10100000 { - status = "okay"; - }; - esw@10110000 { - status = "okay"; ralink,portmap = <0x3e>; }; @@ -85,10 +76,6 @@ }; }; - wmac@10180000 { - status = "okay"; - }; - otg@101c0000 { status = "okay"; }; diff --git a/target/linux/ramips/dts/mt7620a.dtsi b/target/linux/ramips/dts/mt7620a.dtsi index 506155bd6f..418258254b 100644 --- a/target/linux/ramips/dts/mt7620a.dtsi +++ b/target/linux/ramips/dts/mt7620a.dtsi @@ -110,8 +110,6 @@ ralink,register-map = [ 00 04 08 0c 20 24 28 2c 30 34 ]; - - status = "disabled"; }; gpio1: gpio@638 { @@ -163,6 +161,9 @@ #size-cells = <0>; status = "disabled"; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c_pins>; }; i2s@a00 { @@ -189,6 +190,9 @@ #size-cells = <1>; status = "disabled"; + + pinctrl-names = "default"; + pinctrl-0 = <&spi_pins>; }; uartlite@c00 { @@ -202,6 +206,9 @@ interrupts = <12>; reg-shift = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&uartlite_pins>; }; systick@d00 { @@ -242,6 +249,62 @@ }; }; + pinctrl { + compatible = "ralink,rt2880-pinmux"; + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + state_default: pinctrl0 { + }; + spi_pins: spi { + spi { + ralink,group = "spi"; + ralink,function = "spi"; + }; + }; + i2c_pins: i2c { + i2c { + lantiq,group = "i2c"; + lantiq,function = "i2c"; + }; + }; + uartlite_pins: uartlite { + uart { + ralink,group = "uartlite"; + ralink,function = "uartlite"; + }; + }; + mdio_pins: mdio { + mdio { + ralink,group = "mdio"; + ralink,function = "mdio"; + }; + }; + ephy_pins: ephy { + ephy { + ralink,group = "ephy"; + ralink,function = "ephy"; + }; + }; + wled_pins: wled { + wled { + ralink,group = "wled"; + ralink,function = "wled"; + }; + }; + rgmii1_pins: rgmii1 { + mdio { + ralink,group = "rgmii1"; + ralink,function = "rgmii1"; + }; + }; + rgmii2_pins: rgmii2 { + mdio { + ralink,group = "rgmii2"; + ralink,function = "rgmii2"; + }; + }; + }; + rstctrl: rstctrl { compatible = "ralink,mt7620a-reset", "ralink,rt2880-reset"; #reset-cells = <1>; @@ -264,13 +327,14 @@ interrupt-parent = <&cpuintc>; interrupts = <5>; - status = "disabled"; - mdio-bus { #address-cells = <1>; #size-cells = <0>; status = "disabled"; + + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins>; }; }; @@ -280,8 +344,6 @@ interrupt-parent = <&intc>; interrupts = <17>; - - status = "disabled"; }; sdhci@10130000 { diff --git a/target/linux/ramips/dts/rt3050.dtsi b/target/linux/ramips/dts/rt3050.dtsi index 1130005e78..86a4d15476 100644 --- a/target/linux/ramips/dts/rt3050.dtsi +++ b/target/linux/ramips/dts/rt3050.dtsi @@ -110,8 +110,6 @@ interrupt-parent = <&intc>; interrupts = <6>; - - status = "disabled"; }; gpio1: gpio@638 { @@ -156,6 +154,9 @@ #address-cells = <1>; #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi_pins>; + status = "disabled"; }; @@ -170,10 +171,40 @@ interrupts = <12>; reg-shift = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&uartlite_pins>; }; }; + pinctrl { + compatible = "ralink,rt2880-pinmux"; + + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinctrl0 { + sdram { + ralink,group = "sdram"; + ralink,function = "sdram"; + }; + }; + + spi_pins: spi { + spi { + ralink,group = "spi"; + ralink,function = "spi"; + }; + }; + uartlite_pins: uartlite { + uart { + ralink,group = "uartlite"; + ralink,function = "uartlite"; + }; + }; + }; + rstctrl: rstctrl { compatible = "ralink,rt3050-reset", "ralink,rt2880-reset"; #reset-cells = <1>; @@ -185,8 +216,6 @@ interrupt-parent = <&cpuintc>; interrupts = <5>; - - status = "disabled"; }; esw@10110000 { @@ -195,8 +224,6 @@ interrupt-parent = <&intc>; interrupts = <17>; - - status = "disabled"; }; wmac@10180000 { @@ -207,8 +234,6 @@ interrupts = <6>; ralink,eeprom = "soc_wmac.eeprom"; - - status = "disabled"; }; otg@101c0000 { diff --git a/target/linux/ramips/dts/rt3352.dtsi b/target/linux/ramips/dts/rt3352.dtsi index e4d35d87c2..db38b00e63 100644 --- a/target/linux/ramips/dts/rt3352.dtsi +++ b/target/linux/ramips/dts/rt3352.dtsi @@ -106,8 +106,6 @@ interrupt-parent = <&intc>; interrupts = <6>; - - status = "disabled"; }; gpio1: gpio@638 { @@ -151,6 +149,9 @@ resets = <&rstctrl 18>; reset-names = "spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi_pins>; + status = "disabled"; }; @@ -165,6 +166,32 @@ interrupts = <12>; reg-shift = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&uartlite_pins>; + }; + }; + + pinctrl { + compatible = "ralink,rt2880-pinmux"; + + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinctrl0 { + }; + + spi_pins: spi { + spi { + ralink,group = "spi"; + ralink,function = "spi"; + }; + }; + uartlite_pins: uartlite { + uart { + ralink,group = "uartlite"; + ralink,function = "uartlite"; + }; }; }; @@ -179,8 +206,6 @@ interrupt-parent = <&cpuintc>; interrupts = <5>; - - status = "disabled"; }; esw@10110000 { @@ -189,8 +214,6 @@ interrupt-parent = <&intc>; interrupts = <17>; - - status = "disabled"; }; wmac@10180000 { @@ -201,8 +224,6 @@ interrupts = <6>; ralink,eeprom = "soc_wmac.eeprom"; - - status = "disabled"; }; ehci@101c0000 { diff --git a/target/linux/ramips/dts/rt3883.dtsi b/target/linux/ramips/dts/rt3883.dtsi index d4387a92d0..15c35612d5 100644 --- a/target/linux/ramips/dts/rt3883.dtsi +++ b/target/linux/ramips/dts/rt3883.dtsi @@ -114,8 +114,6 @@ ralink,register-map = [ 00 04 08 0c 20 24 28 2c 30 34 ]; - - status = "disabled"; }; gpio1: gpio@638 { @@ -175,6 +173,9 @@ resets = <&rstctrl 18>; reset-names = "spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi_pins>; + status = "disabled"; }; @@ -189,6 +190,32 @@ interrupts = <12>; reg-shift = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&uartlite_pins>; + }; + }; + + pinctrl { + compatible = "ralink,rt2880-pinmux"; + + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + state_default: pinctrl0 { + }; + + spi_pins: spi { + spi { + ralink,group = "spi"; + ralink,function = "spi"; + }; + }; + + uartlite_pins: uartlite { + uart { + ralink,group = "uartlite"; + ralink,function = "uartlite"; + }; }; }; @@ -199,8 +226,6 @@ interrupt-parent = <&cpuintc>; interrupts = <5>; - status = "disabled"; - port@0 { compatible = "ralink,rt3883-port", "ralink,eth-port"; reg = <0>; @@ -320,8 +345,6 @@ interrupts = <6>; ralink,eeprom = "soc_wmac.eeprom"; - - status = "disabled"; }; ehci@101c0000 { diff --git a/target/linux/ramips/dts/rt5350.dtsi b/target/linux/ramips/dts/rt5350.dtsi index e132699da3..cb9077f7b4 100644 --- a/target/linux/ramips/dts/rt5350.dtsi +++ b/target/linux/ramips/dts/rt5350.dtsi @@ -110,8 +110,6 @@ ralink,register-map = [ 00 04 08 0c 20 24 28 2c 30 34 ]; - - status = "disabled"; }; gpio1: gpio@638 { @@ -162,6 +160,9 @@ #address-cells = <1>; #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_pins>; + status = "disabled"; }; @@ -175,6 +176,9 @@ #address-cells = <1>; #size-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&spi_pins>; + status = "disabled"; }; @@ -188,6 +192,9 @@ interrupt-parent = <&intc>; interrupts = <12>; + pinctrl-names = "default"; + pinctrl-0 = <&uartlite_pins>; + reg-shift = <2>; }; @@ -200,6 +207,41 @@ }; }; + pinctrl { + compatible = "ralink,rt2880-pinmux"; + + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinctrl0 { + }; + + spi_pins: spi { + spi { + ralink,group = "spi"; + ralink,function = "spi"; + }; + }; + i2c_pins: i2c { + i2c { + ralink,group = "i2c"; + ralink,function = "i2c"; + }; + }; + phy_led_pins: phy_led { + phy_led { + ralink,group = "led"; + ralink,function = "led"; + }; + }; + uartlite_pins: uartlite { + uart { + ralink,group = "uartlite"; + ralink,function = "uartlite"; + }; + }; + }; + rstctrl: rstctrl { compatible = "ralink,rt5350-reset", "ralink,rt2880-reset"; #reset-cells = <1>; @@ -218,8 +260,6 @@ interrupt-parent = <&cpuintc>; interrupts = <5>; - - status = "disabled"; }; esw@10110000 { @@ -228,8 +268,6 @@ interrupt-parent = <&intc>; interrupts = <17>; - - status = "disabled"; }; wmac@10180000 { @@ -240,8 +278,6 @@ interrupts = <6>; ralink,eeprom = "soc_wmac.eeprom"; - - status = "disabled"; }; ehci@101c0000 { diff --git a/target/linux/ramips/mt7620a/config-3.10 b/target/linux/ramips/mt7620a/config-3.10 index 618c27a901..47ed648fd2 100644 --- a/target/linux/ramips/mt7620a/config-3.10 +++ b/target/linux/ramips/mt7620a/config-3.10 @@ -1,7 +1,6 @@ CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y CONFIG_ARCH_DISCARD_MEMBLOCK=y CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y -CONFIG_ARCH_HAS_RESET_CONTROLLER=y CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_REQUIRE_GPIOLIB=y @@ -30,6 +29,7 @@ CONFIG_CPU_R4K_FPU=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_CSRC_R4K=y +CONFIG_DEBUG_PINCTRL=y CONFIG_DMA_NONCOHERENT=y # CONFIG_DTB_MT7620A_EVAL is not set CONFIG_DTB_RT_NONE=y @@ -135,6 +135,11 @@ CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PERF_USE_VMALLOC=y CONFIG_PHYLIB=y +# CONFIG_PINCONF is not set +CONFIG_PINCTRL=y +CONFIG_PINCTRL_RT2880=y +# CONFIG_PINCTRL_SINGLE is not set +CONFIG_PINMUX=y # CONFIG_PREEMPT_RCU is not set CONFIG_RALINK=y CONFIG_RALINK_USBPHY=y diff --git a/target/linux/ramips/patches-3.10/0006-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch b/target/linux/ramips/patches-3.10/0006-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch index cd4f38f925..19d592bde2 100644 --- a/target/linux/ramips/patches-3.10/0006-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch +++ b/target/linux/ramips/patches-3.10/0006-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch @@ -19,9 +19,11 @@ Cc: linux-gpio@vger.kernel.org create mode 100644 arch/mips/include/asm/mach-ralink/gpio.h create mode 100644 drivers/gpio/gpio-ralink.c ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -444,6 +444,7 @@ config RALINK +Index: linux-3.10.9/arch/mips/Kconfig +=================================================================== +--- linux-3.10.9.orig/arch/mips/Kconfig 2013-08-26 17:48:27.481164281 +0200 ++++ linux-3.10.9/arch/mips/Kconfig 2013-08-27 23:15:40.751965869 +0200 +@@ -444,6 +444,7 @@ select SYS_HAS_EARLY_PRINTK select HAVE_MACH_CLKDEV select CLKDEV_LOOKUP @@ -29,8 +31,10 @@ Cc: linux-gpio@vger.kernel.org config SGI_IP22 bool "SGI IP22 (Indy/Indigo2)" ---- /dev/null -+++ b/arch/mips/include/asm/mach-ralink/gpio.h +Index: linux-3.10.9/arch/mips/include/asm/mach-ralink/gpio.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-3.10.9/arch/mips/include/asm/mach-ralink/gpio.h 2013-08-26 17:48:30.941164428 +0200 @@ -0,0 +1,24 @@ +/* + * Ralink SoC GPIO API support @@ -56,9 +60,11 @@ Cc: linux-gpio@vger.kernel.org +#define gpio_to_irq __gpio_to_irq + +#endif /* __ASM_MACH_RALINK_GPIO_H */ ---- a/drivers/gpio/Kconfig -+++ b/drivers/gpio/Kconfig -@@ -209,6 +209,12 @@ config GPIO_RCAR +Index: linux-3.10.9/drivers/gpio/Kconfig +=================================================================== +--- linux-3.10.9.orig/drivers/gpio/Kconfig 2013-08-21 00:40:47.000000000 +0200 ++++ linux-3.10.9/drivers/gpio/Kconfig 2013-08-26 17:48:30.941164428 +0200 +@@ -209,6 +209,12 @@ help Say yes here to support GPIO on Renesas R-Car SoCs. @@ -71,9 +77,11 @@ Cc: linux-gpio@vger.kernel.org config GPIO_SPEAR_SPICS bool "ST SPEAr13xx SPI Chip Select as GPIO support" depends on PLAT_SPEAR ---- a/drivers/gpio/Makefile -+++ b/drivers/gpio/Makefile -@@ -56,6 +56,7 @@ obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf85 +Index: linux-3.10.9/drivers/gpio/Makefile +=================================================================== +--- linux-3.10.9.orig/drivers/gpio/Makefile 2013-08-21 00:40:47.000000000 +0200 ++++ linux-3.10.9/drivers/gpio/Makefile 2013-08-26 17:48:30.941164428 +0200 +@@ -56,6 +56,7 @@ obj-$(CONFIG_GPIO_PCH) += gpio-pch.o obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o @@ -81,9 +89,11 @@ Cc: linux-gpio@vger.kernel.org obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o obj-$(CONFIG_GPIO_RCAR) += gpio-rcar.o ---- /dev/null -+++ b/drivers/gpio/gpio-ralink.c -@@ -0,0 +1,337 @@ +Index: linux-3.10.9/drivers/gpio/gpio-ralink.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-3.10.9/drivers/gpio/gpio-ralink.c 2013-08-27 22:37:34.999868257 +0200 +@@ -0,0 +1,345 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published @@ -337,6 +347,13 @@ Cc: linux-gpio@vger.kernel.org + dev_info(rg->chip.dev, "registering %d irq handlers\n", rg->chip.ngpio); +} + ++static int ralink_gpio_request(struct gpio_chip *chip, unsigned offset) ++{ ++ int gpio = chip->base + offset; ++ ++ return pinctrl_request_gpio(gpio); ++} ++ +static int ralink_gpio_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; @@ -388,6 +405,7 @@ Cc: linux-gpio@vger.kernel.org + rg->chip.direction_output = ralink_gpio_direction_output; + rg->chip.get = ralink_gpio_get; + rg->chip.set = ralink_gpio_set; ++ rg->chip.request = ralink_gpio_request; + rg->chip.to_irq = ralink_gpio_to_irq; + + /* set polarity to low for all lines */ diff --git a/target/linux/ramips/patches-3.10/0101-MIPS-ralink-add-pinmux-driver.patch b/target/linux/ramips/patches-3.10/0101-MIPS-ralink-add-pinmux-driver.patch deleted file mode 100644 index 3fd0ddf739..0000000000 --- a/target/linux/ramips/patches-3.10/0101-MIPS-ralink-add-pinmux-driver.patch +++ /dev/null @@ -1,144 +0,0 @@ -From 9a3055dad80db43aeb22b247512e18e8f06bf54c Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Mon, 22 Apr 2013 23:11:42 +0200 -Subject: [PATCH 02/33] MIPS: ralink: add pinmux driver - -Add code to setup the pinmux on ralonk SoC. The SoC has a single 32 bit register -for this functionality with simple on/off bits. Building a full featured pinctrl -driver would be overkill. - -Signed-off-by: John Crispin ---- - arch/mips/ralink/Makefile | 2 +- - arch/mips/ralink/common.h | 2 ++ - arch/mips/ralink/of.c | 2 ++ - arch/mips/ralink/pinmux.c | 77 +++++++++++++++++++++++++++++++++++++++++++++ - 4 files changed, 82 insertions(+), 1 deletion(-) - create mode 100644 arch/mips/ralink/pinmux.c - ---- a/arch/mips/ralink/Makefile -+++ b/arch/mips/ralink/Makefile -@@ -6,7 +6,7 @@ - # Copyright (C) 2009-2011 Gabor Juhos - # Copyright (C) 2013 John Crispin - --obj-y := prom.o of.o reset.o clk.o irq.o timer.o -+obj-y := prom.o of.o reset.o clk.o irq.o timer.o pinmux.o - - obj-$(CONFIG_CLKEVT_RT3352) += cevt-rt3352.o - ---- a/arch/mips/ralink/common.h -+++ b/arch/mips/ralink/common.h -@@ -52,4 +52,6 @@ extern void prom_soc_init(struct ralink_ - - __iomem void *plat_of_remap_node(const char *node); - -+void ralink_pinmux(void); -+ - #endif /* _RALINK_COMMON_H__ */ ---- a/arch/mips/ralink/of.c -+++ b/arch/mips/ralink/of.c -@@ -113,6 +113,8 @@ static int __init plat_of_setup(void) - /* make sure ithat the reset controller is setup early */ - ralink_rst_init(); - -+ ralink_pinmux(); -+ - return 0; - } - ---- /dev/null -+++ b/arch/mips/ralink/pinmux.c -@@ -0,0 +1,92 @@ -+/* -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ * -+ * Copyright (C) 2013 John Crispin -+ */ -+ -+#include -+#include -+ -+#include -+ -+#include "common.h" -+ -+#define SYSC_REG_GPIO_MODE 0x60 -+ -+static int ralink_mux_mask(const char *name, struct ralink_pinmux_grp *grps, u32* mask) -+{ -+ for (; grps && grps->name; grps++) -+ if (!strcmp(grps->name, name)) { -+ *mask = grps->mask; -+ return 0; -+ } -+ -+ return -1; -+} -+ -+void ralink_pinmux(void) -+{ -+ const __be32 *wdt; -+ struct device_node *np; -+ struct property *prop; -+ const char *uart, *pci, *pin; -+ u32 mode = 0; -+ int m; -+ -+ np = of_find_compatible_node(NULL, NULL, "ralink,rt3050-sysc"); -+ if (!np) -+ return; -+ -+ of_property_for_each_string(np, "ralink,gpiomux", prop, pin) { -+ if (!ralink_mux_mask(pin, rt_gpio_pinmux.mode, &m)) { -+ mode |= m; -+ pr_debug("pinmux: registered gpiomux \"%s\"\n", pin); -+ } else { -+ pr_err("pinmux: failed to load \"%s\"\n", pin); -+ } -+ } -+ -+ of_property_for_each_string(np, "ralink,pinmux", prop, pin) { -+ if (!ralink_mux_mask(pin, rt_gpio_pinmux.mode, &m)) { -+ mode &= ~m; -+ pr_debug("pinmux: registered pinmux \"%s\"\n", pin); -+ } else { -+ pr_err("pinmux: failed to load group \"%s\"\n", pin); -+ } -+ } -+ -+ of_property_read_string(np, "ralink,uartmux", &uart); -+ if (uart) { -+ mode &= ~(rt_gpio_pinmux.uart_mask << rt_gpio_pinmux.uart_shift); -+ if (ralink_mux_mask(uart, rt_gpio_pinmux.uart, &m)) { -+ pr_err("pinmux: failed to load uartmux \"%s\"\n", uart); -+ mode |= rt_gpio_pinmux.uart_mask << rt_gpio_pinmux.uart_shift; -+ } else { -+ mode |= m << rt_gpio_pinmux.uart_shift; -+ pr_debug("pinmux: registered uartmux \"%s\"\n", uart); -+ } -+ } -+ -+ wdt = of_get_property(np, "ralink,wdtmux", NULL); -+ if (wdt && *wdt && rt_gpio_pinmux.wdt_reset) -+ rt_gpio_pinmux.wdt_reset(); -+ -+ pci = NULL; -+ if (rt_gpio_pinmux.pci) -+ of_property_read_string(np, "ralink,pcimux", &pci); -+ -+ if (pci) { -+ mode &= ~(rt_gpio_pinmux.pci_mask << rt_gpio_pinmux.pci_shift); -+ if (ralink_mux_mask(pci, rt_gpio_pinmux.pci, &m)) { -+ mode |= rt_gpio_pinmux.pci_mask << rt_gpio_pinmux.pci_shift; -+ pr_debug("pinmux: failed to load pcimux \"%s\"\n", pci); -+ } else { -+ mode |= m << rt_gpio_pinmux.pci_shift; -+ pr_debug("pinmux: registered pcimux \"%s\"\n", pci); -+ } -+ } -+ -+ rt_sysc_w32(mode, SYSC_REG_GPIO_MODE); -+} diff --git a/target/linux/ramips/patches-3.10/0122-pinmux.patch b/target/linux/ramips/patches-3.10/0122-pinmux.patch new file mode 100644 index 0000000000..fa0dd05226 --- /dev/null +++ b/target/linux/ramips/patches-3.10/0122-pinmux.patch @@ -0,0 +1,1276 @@ +From d59fe652e3674e98caa688b4ddc9308007267adc Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Mon, 19 Aug 2013 13:49:52 +0200 +Subject: [PATCH] pinctrl: ralink; add pinctrl driver + +Signed-off-by: John Crispin +--- + arch/mips/Kconfig | 2 + + arch/mips/ralink/common.h | 21 +-- + arch/mips/ralink/dts/mt7620a.dtsi | 7 + + drivers/pinctrl/Kconfig | 5 + + drivers/pinctrl/Makefile | 1 + + drivers/pinctrl/pinctrl-rt2880.c | 368 +++++++++++++++++++++++++++++++++++++ + 6 files changed, 385 insertions(+), 19 deletions(-) + create mode 100644 drivers/pinctrl/pinctrl-rt2880.c + +Index: linux-3.10.9/arch/mips/Kconfig +=================================================================== +--- linux-3.10.9.orig/arch/mips/Kconfig 2013-08-28 16:34:42.449951676 +0200 ++++ linux-3.10.9/arch/mips/Kconfig 2013-08-28 16:34:43.361951711 +0200 +@@ -446,6 +446,8 @@ + select HAVE_MACH_CLKDEV + select CLKDEV_LOOKUP + select ARCH_REQUIRE_GPIOLIB ++ select PINCTRL ++ select PINCTRL_RT2880 + + config SGI_IP22 + bool "SGI IP22 (Indy/Indigo2)" +Index: linux-3.10.9/drivers/pinctrl/Kconfig +=================================================================== +--- linux-3.10.9.orig/drivers/pinctrl/Kconfig 2013-08-21 00:40:47.000000000 +0200 ++++ linux-3.10.9/drivers/pinctrl/Kconfig 2013-08-28 16:34:43.361951711 +0200 +@@ -114,6 +114,11 @@ + select PINMUX + select PINCONF + ++config PINCTRL_RT2880 ++ bool ++ depends on RALINK ++ select PINMUX ++ + config PINCTRL_FALCON + bool + depends on SOC_FALCON +Index: linux-3.10.9/drivers/pinctrl/Makefile +=================================================================== +--- linux-3.10.9.orig/drivers/pinctrl/Makefile 2013-08-21 00:40:47.000000000 +0200 ++++ linux-3.10.9/drivers/pinctrl/Makefile 2013-08-28 16:34:43.361951711 +0200 +@@ -45,6 +45,7 @@ + obj-$(CONFIG_PINCTRL_S3C64XX) += pinctrl-s3c64xx.o + obj-$(CONFIG_PINCTRL_XWAY) += pinctrl-xway.o + obj-$(CONFIG_PINCTRL_LANTIQ) += pinctrl-lantiq.o ++obj-$(CONFIG_PINCTRL_RT2880) += pinctrl-rt2880.o + + obj-$(CONFIG_PLAT_ORION) += mvebu/ + obj-$(CONFIG_ARCH_SHMOBILE) += sh-pfc/ +Index: linux-3.10.9/drivers/pinctrl/pinctrl-rt2880.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-3.10.9/drivers/pinctrl/pinctrl-rt2880.c 2013-08-28 16:34:43.361951711 +0200 +@@ -0,0 +1,456 @@ ++/* ++ * linux/drivers/pinctrl/pinctrl-rt2880.c ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * publishhed by the Free Software Foundation. ++ * ++ * Copyright (C) 2013 John Crispin ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++ ++#include "core.h" ++ ++#define SYSC_REG_GPIO_MODE 0x60 ++ ++struct rt2880_priv { ++ struct device *dev; ++ ++ struct pinctrl_pin_desc *pads; ++ struct pinctrl_desc *desc; ++ ++ struct rt2880_pmx_func **func; ++ int func_count; ++ ++ struct rt2880_pmx_group *groups; ++ const char **group_names; ++ int group_count; ++ ++ uint8_t *gpio; ++ int max_pins; ++}; ++ ++struct rt2880_pmx_group *rt2880_pinmux_data = NULL; ++ ++static int rt2880_get_group_count(struct pinctrl_dev *pctrldev) ++{ ++ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev); ++ ++ return p->group_count; ++} ++ ++static const char *rt2880_get_group_name(struct pinctrl_dev *pctrldev, ++ unsigned group) ++{ ++ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev); ++ ++ if (group >= p->group_count) ++ return NULL; ++ ++ return p->group_names[group]; ++} ++ ++static int rt2880_get_group_pins(struct pinctrl_dev *pctrldev, ++ unsigned group, ++ const unsigned **pins, ++ unsigned *num_pins) ++{ ++ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev); ++ ++ if (group >= p->group_count) ++ return -EINVAL; ++ ++ *pins = p->groups[group].func[0].pins; ++ *num_pins = p->groups[group].func[0].pin_count; ++ ++ return 0; ++} ++ ++static void rt2880_pinctrl_dt_free_map(struct pinctrl_dev *pctrldev, ++ struct pinctrl_map *map, unsigned num_maps) ++{ ++ int i; ++ ++ for (i = 0; i < num_maps; i++) ++ if (map[i].type == PIN_MAP_TYPE_CONFIGS_PIN || ++ map[i].type == PIN_MAP_TYPE_CONFIGS_GROUP) ++ kfree(map[i].data.configs.configs); ++ kfree(map); ++} ++ ++static void rt2880_pinctrl_pin_dbg_show(struct pinctrl_dev *pctrldev, ++ struct seq_file *s, ++ unsigned offset) ++{ ++ seq_printf(s, "ralink pio"); ++} ++ ++static void rt2880_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctrldev, ++ struct device_node *np, ++ struct pinctrl_map **map) ++{ ++ const char *function; ++ int func = of_property_read_string(np, "ralink,function", &function); ++ int grps = of_property_count_strings(np, "ralink,group"); ++ int i; ++ ++ if (func || !grps) ++ return; ++ ++ for (i = 0; i < grps; i++) { ++ const char *group; ++ ++ of_property_read_string_index(np, "ralink,group", i, &group); ++ ++ (*map)->type = PIN_MAP_TYPE_MUX_GROUP; ++ (*map)->name = function; ++ (*map)->data.mux.group = group; ++ (*map)->data.mux.function = function; ++ (*map)++; ++ } ++} ++ ++static int rt2880_pinctrl_dt_node_to_map(struct pinctrl_dev *pctrldev, ++ struct device_node *np_config, ++ struct pinctrl_map **map, ++ unsigned *num_maps) ++{ ++ int max_maps = 0; ++ struct pinctrl_map *tmp; ++ struct device_node *np; ++ ++ for_each_child_of_node(np_config, np) { ++ int ret = of_property_count_strings(np, "ralink,group"); ++ ++ if (ret >= 0) ++ max_maps += ret; ++ } ++ ++ if (!max_maps) ++ return max_maps; ++ ++ *map = kzalloc(max_maps * sizeof(struct pinctrl_map), GFP_KERNEL); ++ if (!*map) ++ return -ENOMEM; ++ ++ tmp = *map; ++ ++ for_each_child_of_node(np_config, np) ++ rt2880_pinctrl_dt_subnode_to_map(pctrldev, np, &tmp); ++ *num_maps = max_maps; ++ ++ return 0; ++} ++ ++static const struct pinctrl_ops rt2880_pctrl_ops = { ++ .get_groups_count = rt2880_get_group_count, ++ .get_group_name = rt2880_get_group_name, ++ .get_group_pins = rt2880_get_group_pins, ++ .pin_dbg_show = rt2880_pinctrl_pin_dbg_show, ++ .dt_node_to_map = rt2880_pinctrl_dt_node_to_map, ++ .dt_free_map = rt2880_pinctrl_dt_free_map, ++}; ++ ++static int rt2880_pmx_func_count(struct pinctrl_dev *pctrldev) ++{ ++ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev); ++ ++ return p->func_count; ++} ++ ++static const char *rt2880_pmx_func_name(struct pinctrl_dev *pctrldev, ++ unsigned func) ++{ ++ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev); ++ ++ return p->func[func]->name; ++} ++ ++static int rt2880_pmx_group_get_groups(struct pinctrl_dev *pctrldev, ++ unsigned func, ++ const char * const **groups, ++ unsigned * const num_groups) ++{ ++ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev); ++ ++ if (p->func[func]->group_count == 1) ++ *groups = &p->group_names[p->func[func]->groups[0]]; ++ else ++ *groups = p->group_names; ++ ++ *num_groups = p->func[func]->group_count; ++ ++ return 0; ++} ++ ++static int rt2880_pmx_group_enable(struct pinctrl_dev *pctrldev, ++ unsigned func, ++ unsigned group) ++{ ++ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev); ++ u32 mode = 0; ++ ++ /* dont allow double use */ ++ if (p->groups[group].enabled) { ++ dev_err(p->dev, "%s is already enabled\n", p->groups[group].name); ++ return -EBUSY; ++ } ++ ++ p->groups[group].enabled = 1; ++ p->func[func]->enabled = 1; ++ ++ mode = rt_sysc_r32(SYSC_REG_GPIO_MODE); ++ mode &= ~(p->groups[group].mask << p->groups[group].shift); ++ ++ /* function 0 is gpio and needs special handling */ ++ if (func == 0) { ++ int i; ++ ++ mode |= p->groups[group].mask << p->groups[group].shift; ++ /* mark the pins as gpio */ ++ for (i = 0; i < p->groups[group].func[0].pin_count; i++) ++ p->gpio[p->groups[group].func[0].pins[i]] = 1; ++ } else { ++ mode |= p->func[func]->value << p->groups[group].shift; ++ } ++ rt_sysc_w32(mode, SYSC_REG_GPIO_MODE); ++ ++ return 0; ++} ++ ++static int rt2880_pmx_group_gpio_request_enable(struct pinctrl_dev *pctrldev, ++ struct pinctrl_gpio_range *range, ++ unsigned pin) ++{ ++ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev); ++ ++ if (!p->gpio[pin]) { ++ dev_err(p->dev, "pin %d is not set to gpio mux\n", pin); ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++static const struct pinmux_ops rt2880_pmx_group_ops = { ++ .get_functions_count = rt2880_pmx_func_count, ++ .get_function_name = rt2880_pmx_func_name, ++ .get_function_groups = rt2880_pmx_group_get_groups, ++ .enable = rt2880_pmx_group_enable, ++ .gpio_request_enable = rt2880_pmx_group_gpio_request_enable, ++}; ++ ++static struct pinctrl_desc rt2880_pctrl_desc = { ++ .owner = THIS_MODULE, ++ .name = "rt2880-pinmux", ++ .pctlops = &rt2880_pctrl_ops, ++ .pmxops = &rt2880_pmx_group_ops, ++}; ++ ++static struct rt2880_pmx_func gpio_func = { ++ .name = "gpio", ++}; ++ ++static int rt2880_pinmux_index(struct rt2880_priv *p) ++{ ++ struct rt2880_pmx_func **f; ++ struct rt2880_pmx_group *mux = p->groups; ++ int i, j, c = 0; ++ ++ /* count the mux functions */ ++ while (mux->name) { ++ p->group_count++; ++ mux++; ++ } ++ ++ /* allocate the group names array needed by the gpio function */ ++ p->group_names = devm_kzalloc(p->dev, sizeof(char *) * p->group_count, GFP_KERNEL); ++ if (!p->group_names) ++ return -1; ++ ++ for (i = 0; i < p->group_count; i++) { ++ p->group_names[i] = p->groups[i].name; ++ p->func_count += p->groups[i].func_count; ++ } ++ ++ /* we have a dummy function[0] for gpio */ ++ p->func_count++; ++ ++ /* allocate our function and group mapping index buffers */ ++ f = p->func = devm_kzalloc(p->dev, sizeof(struct rt2880_pmx_func) * p->func_count, GFP_KERNEL); ++ gpio_func.groups = devm_kzalloc(p->dev, sizeof(int) * p->group_count, GFP_KERNEL); ++ if (!f || !gpio_func.groups) ++ return -1; ++ ++ /* add a backpointer to the function so it knows its group */ ++ gpio_func.group_count = p->group_count; ++ for (i = 0; i < gpio_func.group_count; i++) ++ gpio_func.groups[i] = i; ++ ++ f[c] = &gpio_func; ++ c++; ++ ++ /* add remaining functions */ ++ for (i = 0; i < p->group_count; i++) { ++ for (j = 0; j < p->groups[i].func_count; j++) { ++ int k; ++ ++ f[c] = &p->groups[i].func[j]; ++ f[c]->groups = devm_kzalloc(p->dev, sizeof(int), GFP_KERNEL); ++ f[c]->groups[0] = i; ++ f[c]->group_count = 1; ++ c++; ++ } ++ } ++ return 0; ++} ++ ++static int rt2880_pinmux_pins(struct rt2880_priv *p) ++{ ++ int i, j; ++ ++ /* loop over the functions and initialize the pins array. also work out the highest pin used */ ++ for (i = 0; i < p->func_count; i++) { ++ int pin; ++ ++ if (!p->func[i]->pin_count) ++ continue; ++ ++ p->func[i]->pins = devm_kzalloc(p->dev, sizeof(int) * p->func[i]->pin_count, GFP_KERNEL); ++ for (j = 0; j < p->func[i]->pin_count; j++) ++ p->func[i]->pins[j] = p->func[i]->pin_first + j; ++ ++ pin = p->func[i]->pin_first + p->func[i]->pin_count; ++ if (pin > p->max_pins) ++ p->max_pins = pin; ++ } ++ ++ /* the buffer that tells us which pins are gpio */ ++ p->gpio = devm_kzalloc(p->dev,sizeof(uint8_t) * p->max_pins, ++ GFP_KERNEL); ++ /* the pads needed to tell pinctrl about our pins */ ++ p->pads = devm_kzalloc(p->dev, ++ sizeof(struct pinctrl_pin_desc) * p->max_pins, ++ GFP_KERNEL); ++ if (!p->pads || !p->gpio ) { ++ dev_err(p->dev, "Failed to allocate gpio data\n"); ++ return -ENOMEM; ++ } ++ ++ /* pin 0 is always a gpio */ ++ p->gpio[0] = 1; ++ ++ /* set the pads */ ++ for (i = 0; i < p->max_pins; i++) { ++ /* strlen("ioXY") + 1 = 5 */ ++ char *name = devm_kzalloc(p->dev, 5, GFP_KERNEL); ++ ++ if (!name) { ++ dev_err(p->dev, "Failed to allocate pad name\n"); ++ return -ENOMEM; ++ } ++ snprintf(name, 5, "io%d", i); ++ p->pads[i].number = i; ++ p->pads[i].name = name; ++ } ++ p->desc->pins = p->pads; ++ p->desc->npins = p->max_pins; ++ ++ return 0; ++} ++ ++static int rt2880_pinmux_probe(struct platform_device *pdev) ++{ ++ struct rt2880_priv *p; ++ struct pinctrl_dev *dev; ++ struct device_node *np; ++ ++ if (!rt2880_pinmux_data) ++ return -ENOSYS; ++ ++ /* setup the private data */ ++ p = devm_kzalloc(&pdev->dev, sizeof(struct rt2880_priv), GFP_KERNEL); ++ if (!p) ++ return -ENOMEM; ++ ++ p->dev = &pdev->dev; ++ p->desc = &rt2880_pctrl_desc; ++ p->groups = rt2880_pinmux_data; ++ platform_set_drvdata(pdev, p); ++ ++ /* init the device */ ++ if (rt2880_pinmux_index(p)) { ++ dev_err(&pdev->dev, "failed to load index\n"); ++ return -EINVAL; ++ } ++ if (rt2880_pinmux_pins(p)) { ++ dev_err(&pdev->dev, "failed to load pins\n"); ++ return -EINVAL; ++ } ++ dev = pinctrl_register(p->desc, &pdev->dev, p); ++ if (IS_ERR(dev)) ++ return PTR_ERR(dev); ++ ++ /* finalize by adding gpio ranges for enables gpio controllers */ ++ for_each_compatible_node(np, NULL, "ralink,rt2880-gpio") { ++ const __be32 *ngpio, *gpiobase; ++ struct pinctrl_gpio_range *range; ++ char *name; ++ ++ if (!of_device_is_available(np)) ++ continue; ++ ++ ngpio = of_get_property(np, "ralink,num-gpios", NULL); ++ gpiobase = of_get_property(np, "ralink,gpio-base", NULL); ++ if (!ngpio || !gpiobase) { ++ dev_err(&pdev->dev, "failed to load chip info\n"); ++ return -EINVAL; ++ } ++ ++ range = devm_kzalloc(p->dev, sizeof(struct pinctrl_gpio_range) + 4, GFP_KERNEL); ++ range->name = name = (char *) &range[1]; ++ sprintf(name, "pio"); ++ range->npins = __be32_to_cpu(*ngpio); ++ range->base = __be32_to_cpu(*gpiobase); ++ pinctrl_add_gpio_range(dev, range); ++ } ++ ++ return 0; ++} ++ ++static const struct of_device_id rt2880_pinmux_match[] = { ++ { .compatible = "ralink,rt2880-pinmux" }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, rt2880_pinmux_match); ++ ++static struct platform_driver rt2880_pinmux_driver = { ++ .probe = rt2880_pinmux_probe, ++ .driver = { ++ .name = "rt2880-pinmux", ++ .owner = THIS_MODULE, ++ .of_match_table = rt2880_pinmux_match, ++ }, ++}; ++ ++int __init rt2880_pinmux_init(void) ++{ ++ return platform_driver_register(&rt2880_pinmux_driver); ++} ++ ++core_initcall_sync(rt2880_pinmux_init); +Index: linux-3.10.9/arch/mips/include/asm/mach-ralink/pinmux.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-3.10.9/arch/mips/include/asm/mach-ralink/pinmux.h 2013-08-28 16:34:43.361951711 +0200 +@@ -0,0 +1,47 @@ ++/* ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * publishhed by the Free Software Foundation. ++ * ++ * Copyright (C) 2012 John Crispin ++ */ ++ ++#ifndef _RT288X_PINMUX_H__ ++#define _RT288X_PINMUX_H__ ++ ++#define FUNC(name, value, pin_first, pin_count) { name, value, pin_first, pin_count } ++#define GRP(_name, _func, _mask, _shift) \ ++ { .name = _name, .mask = _mask, .shift = _shift, \ ++ .func = _func, \ ++ .func_count = ARRAY_SIZE(_func) } ++ ++struct rt2880_pmx_group; ++ ++struct rt2880_pmx_func { ++ const char *name; ++ const char value; ++ ++ int pin_first; ++ int pin_count; ++ int *pins; ++ ++ int *groups; ++ int group_count; ++ ++ int enabled; ++}; ++ ++struct rt2880_pmx_group { ++ const char *name; ++ int enabled; ++ ++ const u32 shift; ++ const char mask; ++ ++ struct rt2880_pmx_func *func; ++ int func_count; ++}; ++ ++extern struct rt2880_pmx_group *rt2880_pinmux_data; ++ ++#endif +Index: linux-3.10.9/arch/mips/ralink/mt7620.c +=================================================================== +--- linux-3.10.9.orig/arch/mips/ralink/mt7620.c 2013-08-28 16:34:42.829951688 +0200 ++++ linux-3.10.9/arch/mips/ralink/mt7620.c 2013-08-28 16:34:43.361951711 +0200 +@@ -17,6 +17,7 @@ + #include + #include + #include ++#include + + #include "common.h" + +@@ -48,118 +49,40 @@ + /* the pll dividers */ + static u32 mt7620_clk_divider[] = { 2, 3, 4, 8 }; + +-static struct ralink_pinmux_grp mode_mux[] = { +- { +- .name = "i2c", +- .mask = MT7620_GPIO_MODE_I2C, +- .gpio_first = 1, +- .gpio_last = 2, +- }, { +- .name = "spi", +- .mask = MT7620_GPIO_MODE_SPI, +- .gpio_first = 3, +- .gpio_last = 6, +- }, { +- .name = "uartlite", +- .mask = MT7620_GPIO_MODE_UART1, +- .gpio_first = 15, +- .gpio_last = 16, +- }, { +- .name = "wdt", +- .mask = MT7620_GPIO_MODE_WDT, +- .gpio_first = 17, +- .gpio_last = 17, +- }, { +- .name = "mdio", +- .mask = MT7620_GPIO_MODE_MDIO, +- .gpio_first = 22, +- .gpio_last = 23, +- }, { +- .name = "rgmii1", +- .mask = MT7620_GPIO_MODE_RGMII1, +- .gpio_first = 24, +- .gpio_last = 35, +- }, { +- .name = "spi refclk", +- .mask = MT7620_GPIO_MODE_SPI_REF_CLK, +- .gpio_first = 37, +- .gpio_last = 39, +- }, { +- .name = "jtag", +- .mask = MT7620_GPIO_MODE_JTAG, +- .gpio_first = 40, +- .gpio_last = 44, +- }, { +- /* shared lines with jtag */ +- .name = "ephy", +- .mask = MT7620_GPIO_MODE_EPHY, +- .gpio_first = 40, +- .gpio_last = 44, +- }, { +- .name = "nand", +- .mask = MT7620_GPIO_MODE_JTAG, +- .gpio_first = 45, +- .gpio_last = 59, +- }, { +- .name = "rgmii2", +- .mask = MT7620_GPIO_MODE_RGMII2, +- .gpio_first = 60, +- .gpio_last = 71, +- }, { +- .name = "wled", +- .mask = MT7620_GPIO_MODE_WLED, +- .gpio_first = 72, +- .gpio_last = 72, +- }, {0} ++static struct rt2880_pmx_func i2c_grp[] = { FUNC("i2c", 1, 1, 2) }; ++static struct rt2880_pmx_func spi_grp[] = { FUNC("spi", 1, 3, 4) }; ++static struct rt2880_pmx_func uartf_grp[] = { ++ FUNC("uartf", MT7620_GPIO_MODE_UARTF, 7, 8), ++ FUNC("pcm uartf", MT7620_GPIO_MODE_PCM_UARTF, 7, 8), ++ FUNC("pcm i2s", MT7620_GPIO_MODE_PCM_I2S, 7, 8), ++ FUNC("i2s uartf", MT7620_GPIO_MODE_I2S_UARTF, 7, 8), ++ FUNC("pcm gpio", MT7620_GPIO_MODE_PCM_GPIO, 11, 4), ++ FUNC("gpio uartf", MT7620_GPIO_MODE_GPIO_UARTF, 7, 4), ++ FUNC("gpio i2s", MT7620_GPIO_MODE_GPIO_I2S, 7, 4), + }; +- +-static struct ralink_pinmux_grp uart_mux[] = { +- { +- .name = "uartf", +- .mask = MT7620_GPIO_MODE_UARTF, +- .gpio_first = 7, +- .gpio_last = 14, +- }, { +- .name = "pcm uartf", +- .mask = MT7620_GPIO_MODE_PCM_UARTF, +- .gpio_first = 7, +- .gpio_last = 14, +- }, { +- .name = "pcm i2s", +- .mask = MT7620_GPIO_MODE_PCM_I2S, +- .gpio_first = 7, +- .gpio_last = 14, +- }, { +- .name = "i2s uartf", +- .mask = MT7620_GPIO_MODE_I2S_UARTF, +- .gpio_first = 7, +- .gpio_last = 14, +- }, { +- .name = "pcm gpio", +- .mask = MT7620_GPIO_MODE_PCM_GPIO, +- .gpio_first = 11, +- .gpio_last = 14, +- }, { +- .name = "gpio uartf", +- .mask = MT7620_GPIO_MODE_GPIO_UARTF, +- .gpio_first = 7, +- .gpio_last = 10, +- }, { +- .name = "gpio i2s", +- .mask = MT7620_GPIO_MODE_GPIO_I2S, +- .gpio_first = 7, +- .gpio_last = 10, +- }, { +- .name = "gpio", +- .mask = MT7620_GPIO_MODE_GPIO, +- }, {0} +-}; +- +-struct ralink_pinmux rt_gpio_pinmux = { +- .mode = mode_mux, +- .uart = uart_mux, +- .uart_shift = MT7620_GPIO_MODE_UART0_SHIFT, +- .uart_mask = MT7620_GPIO_MODE_UART0_MASK, ++static struct rt2880_pmx_func uartlite_grp[] = { FUNC("uartlite", 1, 15, 2) }; ++static struct rt2880_pmx_func wdt_grp[] = { FUNC("wdt", 1, 17, 1) }; ++static struct rt2880_pmx_func mdio_grp[] = { FUNC("mdio", 1, 22, 2) }; ++static struct rt2880_pmx_func rgmii1_grp[] = { FUNC("rgmii1", 1, 24, 12) }; ++static struct rt2880_pmx_func refclk_grp[] = { FUNC("spi refclk", 1, 37, 3) }; ++static struct rt2880_pmx_func ephy_grp[] = { FUNC("ephy", 1, 40, 5) }; ++static struct rt2880_pmx_func rgmii2_grp[] = { FUNC("rgmii2", 1, 60, 12) }; ++static struct rt2880_pmx_func wled_grp[] = { FUNC("wled", 1, 72, 1) }; ++ ++static struct rt2880_pmx_group mt7620a_pinmux_data[] = { ++ GRP("i2c", i2c_grp, 1, MT7620_GPIO_MODE_I2C), ++ GRP("spi", spi_grp, 1, MT7620_GPIO_MODE_SPI), ++ GRP("uartlite", uartlite_grp, 1, MT7620_GPIO_MODE_UART1), ++ GRP("wdt", wdt_grp, 1, MT7620_GPIO_MODE_WDT), ++ GRP("mdio", mdio_grp, 1, MT7620_GPIO_MODE_MDIO), ++ GRP("rgmii1", rgmii1_grp, 1, MT7620_GPIO_MODE_RGMII1), ++ GRP("spi refclk", refclk_grp, 1, MT7620_GPIO_MODE_SPI_REF_CLK), ++ GRP("rgmii2", rgmii2_grp, 1, MT7620_GPIO_MODE_RGMII2), ++ GRP("ephy", ephy_grp, 1, MT7620_GPIO_MODE_EPHY), ++ GRP("wled", wled_grp, 1, MT7620_GPIO_MODE_WLED), ++ GRP("uartf", uartf_grp, MT7620_GPIO_MODE_UART0_MASK, ++ MT7620_GPIO_MODE_UART0_SHIFT), ++ { 0 } + }; + + void __init ralink_clk_init(void) +@@ -281,4 +204,6 @@ + (pmu0 & PMU_SW_SET) ? ("sw") : ("hw")); + pr_info("Digital PMU set to %s control\n", + (pmu1 & DIG_SW_SEL) ? ("sw") : ("hw")); ++ ++ rt2880_pinmux_data = mt7620a_pinmux_data; + } +Index: linux-3.10.9/arch/mips/ralink/rt305x.c +=================================================================== +--- linux-3.10.9.orig/arch/mips/ralink/rt305x.c 2013-08-28 16:34:43.061951698 +0200 ++++ linux-3.10.9/arch/mips/ralink/rt305x.c 2013-08-28 16:34:43.365951713 +0200 +@@ -17,90 +17,71 @@ + #include + #include + #include ++#include + + #include "common.h" + + enum rt305x_soc_type rt305x_soc; + +-static struct ralink_pinmux_grp mode_mux[] = { +- { +- .name = "i2c", +- .mask = RT305X_GPIO_MODE_I2C, +- .gpio_first = RT305X_GPIO_I2C_SD, +- .gpio_last = RT305X_GPIO_I2C_SCLK, +- }, { +- .name = "spi", +- .mask = RT305X_GPIO_MODE_SPI, +- .gpio_first = RT305X_GPIO_SPI_EN, +- .gpio_last = RT305X_GPIO_SPI_CLK, +- }, { +- .name = "uartlite", +- .mask = RT305X_GPIO_MODE_UART1, +- .gpio_first = RT305X_GPIO_UART1_TXD, +- .gpio_last = RT305X_GPIO_UART1_RXD, +- }, { +- .name = "jtag", +- .mask = RT305X_GPIO_MODE_JTAG, +- .gpio_first = RT305X_GPIO_JTAG_TDO, +- .gpio_last = RT305X_GPIO_JTAG_TDI, +- }, { +- .name = "mdio", +- .mask = RT305X_GPIO_MODE_MDIO, +- .gpio_first = RT305X_GPIO_MDIO_MDC, +- .gpio_last = RT305X_GPIO_MDIO_MDIO, +- }, { +- .name = "sdram", +- .mask = RT305X_GPIO_MODE_SDRAM, +- .gpio_first = RT305X_GPIO_SDRAM_MD16, +- .gpio_last = RT305X_GPIO_SDRAM_MD31, +- }, { +- .name = "rgmii", +- .mask = RT305X_GPIO_MODE_RGMII, +- .gpio_first = RT305X_GPIO_GE0_TXD0, +- .gpio_last = RT305X_GPIO_GE0_RXCLK, +- }, {0} ++static struct rt2880_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) }; ++static struct rt2880_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) }; ++static struct rt2880_pmx_func uartf_func[] = { ++ FUNC("uartf", RT305X_GPIO_MODE_UARTF, 7, 8), ++ FUNC("pcm uartf", RT305X_GPIO_MODE_PCM_UARTF, 7, 8), ++ FUNC("pcm i2s", RT305X_GPIO_MODE_PCM_I2S, 7, 8), ++ FUNC("i2s uartf", RT305X_GPIO_MODE_I2S_UARTF, 7, 8), ++ FUNC("pcm gpio", RT305X_GPIO_MODE_PCM_GPIO, 11, 4), ++ FUNC("gpio uartf", RT305X_GPIO_MODE_GPIO_UARTF, 7, 4), ++ FUNC("gpio i2s", RT305X_GPIO_MODE_GPIO_I2S, 7, 4), ++}; ++static struct rt2880_pmx_func uartlite_func[] = { FUNC("uartlite", 0, 15, 2) }; ++static struct rt2880_pmx_func jtag_func[] = { FUNC("jtag", 0, 17, 25) }; ++static struct rt2880_pmx_func mdio_func[] = { FUNC("mdio", 0, 22, 2) }; ++static struct rt2880_pmx_func rt5350_led_func[] = { FUNC("led", 0, 22, 5) }; ++static struct rt2880_pmx_func sdram_func[] = { FUNC("sdram", 0, 24, 16) }; ++static struct rt2880_pmx_func rt3352_rgmii_func[] = { FUNC("rgmii", 0, 24, 12) }; ++static struct rt2880_pmx_func rgmii_func[] = { FUNC("rgmii", 0, 40, 12) }; ++static struct rt2880_pmx_func rt3352_lna_func[] = { FUNC("lna", 0, 36, 2) }; ++static struct rt2880_pmx_func rt3352_pa_func[] = { FUNC("pa", 0, 38, 2) }; ++static struct rt2880_pmx_func rt3352_led_func[] = { FUNC("led", 0, 40, 5) }; ++ ++static struct rt2880_pmx_group rt3050_pinmux_data[] = { ++ GRP("i2c", i2c_func, 1, RT305X_GPIO_MODE_I2C), ++ GRP("spi", spi_func, 1, RT305X_GPIO_MODE_SPI), ++ GRP("uartf", uartf_func, RT305X_GPIO_MODE_UART0_MASK, ++ RT305X_GPIO_MODE_UART0_SHIFT), ++ GRP("uartlite", uartlite_func, 1, RT305X_GPIO_MODE_UART1), ++ GRP("jtag", jtag_func, 1, RT305X_GPIO_MODE_JTAG), ++ GRP("mdio", mdio_func, 1, RT305X_GPIO_MODE_MDIO), ++ GRP("rgmii", rgmii_func, 1, RT305X_GPIO_MODE_RGMII), ++ GRP("sdram", sdram_func, 1, RT305X_GPIO_MODE_SDRAM), ++ { 0 } ++}; ++ ++static struct rt2880_pmx_group rt3352_pinmux_data[] = { ++ GRP("i2c", i2c_func, 1, RT305X_GPIO_MODE_I2C), ++ GRP("spi", spi_func, 1, RT305X_GPIO_MODE_SPI), ++ GRP("uartf", uartf_func, RT305X_GPIO_MODE_UART0_MASK, ++ RT305X_GPIO_MODE_UART0_SHIFT), ++ GRP("uartlite", uartlite_func, 1, RT305X_GPIO_MODE_UART1), ++ GRP("jtag", jtag_func, 1, RT305X_GPIO_MODE_JTAG), ++ GRP("mdio", mdio_func, 1, RT305X_GPIO_MODE_MDIO), ++ GRP("rgmii", rt3352_rgmii_func, 1, RT305X_GPIO_MODE_RGMII), ++ GRP("lna", rt3352_lna_func, 1, RT3352_GPIO_MODE_LNA), ++ GRP("pa", rt3352_pa_func, 1, RT3352_GPIO_MODE_PA), ++ GRP("led", rt3352_led_func, 1, RT5350_GPIO_MODE_PHY_LED), ++ { 0 } + }; + +-static struct ralink_pinmux_grp uart_mux[] = { +- { +- .name = "uartf", +- .mask = RT305X_GPIO_MODE_UARTF, +- .gpio_first = RT305X_GPIO_7, +- .gpio_last = RT305X_GPIO_14, +- }, { +- .name = "pcm uartf", +- .mask = RT305X_GPIO_MODE_PCM_UARTF, +- .gpio_first = RT305X_GPIO_7, +- .gpio_last = RT305X_GPIO_14, +- }, { +- .name = "pcm i2s", +- .mask = RT305X_GPIO_MODE_PCM_I2S, +- .gpio_first = RT305X_GPIO_7, +- .gpio_last = RT305X_GPIO_14, +- }, { +- .name = "i2s uartf", +- .mask = RT305X_GPIO_MODE_I2S_UARTF, +- .gpio_first = RT305X_GPIO_7, +- .gpio_last = RT305X_GPIO_14, +- }, { +- .name = "pcm gpio", +- .mask = RT305X_GPIO_MODE_PCM_GPIO, +- .gpio_first = RT305X_GPIO_10, +- .gpio_last = RT305X_GPIO_14, +- }, { +- .name = "gpio uartf", +- .mask = RT305X_GPIO_MODE_GPIO_UARTF, +- .gpio_first = RT305X_GPIO_7, +- .gpio_last = RT305X_GPIO_10, +- }, { +- .name = "gpio i2s", +- .mask = RT305X_GPIO_MODE_GPIO_I2S, +- .gpio_first = RT305X_GPIO_7, +- .gpio_last = RT305X_GPIO_10, +- }, { +- .name = "gpio", +- .mask = RT305X_GPIO_MODE_GPIO, +- }, {0} ++static struct rt2880_pmx_group rt5350_pinmux_data[] = { ++ GRP("i2c", i2c_func, 1, RT305X_GPIO_MODE_I2C), ++ GRP("spi", spi_func, 1, RT305X_GPIO_MODE_SPI), ++ GRP("uartf", uartf_func, RT305X_GPIO_MODE_UART0_MASK, ++ RT305X_GPIO_MODE_UART0_SHIFT), ++ GRP("uartlite", uartlite_func, 1, RT305X_GPIO_MODE_UART1), ++ GRP("jtag", jtag_func, 1, RT305X_GPIO_MODE_JTAG), ++ GRP("led", rt5350_led_func, 1, RT5350_GPIO_MODE_PHY_LED), ++ { 0 } + }; + + static void rt305x_wdt_reset(void) +@@ -114,14 +95,6 @@ + rt_sysc_w32(t, SYSC_REG_SYSTEM_CONFIG); + } + +-struct ralink_pinmux rt_gpio_pinmux = { +- .mode = mode_mux, +- .uart = uart_mux, +- .uart_shift = RT305X_GPIO_MODE_UART0_SHIFT, +- .uart_mask = RT305X_GPIO_MODE_UART0_MASK, +- .wdt_reset = rt305x_wdt_reset, +-}; +- + static unsigned long rt5350_get_mem_size(void) + { + void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT305X_SYSC_BASE); +@@ -291,11 +264,14 @@ + soc_info->mem_base = RT305X_SDRAM_BASE; + if (soc_is_rt5350()) { + soc_info->mem_size = rt5350_get_mem_size(); ++ rt2880_pinmux_data = rt5350_pinmux_data; + } else if (soc_is_rt305x() || soc_is_rt3350()) { + soc_info->mem_size_min = RT305X_MEM_SIZE_MIN; + soc_info->mem_size_max = RT305X_MEM_SIZE_MAX; ++ rt2880_pinmux_data = rt3050_pinmux_data; + } else if (soc_is_rt3352()) { + soc_info->mem_size_min = RT3352_MEM_SIZE_MIN; + soc_info->mem_size_max = RT3352_MEM_SIZE_MAX; ++ rt2880_pinmux_data = rt3352_pinmux_data; + } + } +Index: linux-3.10.9/arch/mips/include/asm/mach-ralink/rt305x.h +=================================================================== +--- linux-3.10.9.orig/arch/mips/include/asm/mach-ralink/rt305x.h 2013-08-21 00:40:47.000000000 +0200 ++++ linux-3.10.9/arch/mips/include/asm/mach-ralink/rt305x.h 2013-08-28 16:34:43.365951713 +0200 +@@ -125,24 +125,28 @@ + #define RT305X_GPIO_GE0_TXD0 40 + #define RT305X_GPIO_GE0_RXCLK 51 + +-#define RT305X_GPIO_MODE_I2C BIT(0) +-#define RT305X_GPIO_MODE_SPI BIT(1) + #define RT305X_GPIO_MODE_UART0_SHIFT 2 + #define RT305X_GPIO_MODE_UART0_MASK 0x7 + #define RT305X_GPIO_MODE_UART0(x) ((x) << RT305X_GPIO_MODE_UART0_SHIFT) +-#define RT305X_GPIO_MODE_UARTF 0x0 +-#define RT305X_GPIO_MODE_PCM_UARTF 0x1 +-#define RT305X_GPIO_MODE_PCM_I2S 0x2 +-#define RT305X_GPIO_MODE_I2S_UARTF 0x3 +-#define RT305X_GPIO_MODE_PCM_GPIO 0x4 +-#define RT305X_GPIO_MODE_GPIO_UARTF 0x5 +-#define RT305X_GPIO_MODE_GPIO_I2S 0x6 +-#define RT305X_GPIO_MODE_GPIO 0x7 +-#define RT305X_GPIO_MODE_UART1 BIT(5) +-#define RT305X_GPIO_MODE_JTAG BIT(6) +-#define RT305X_GPIO_MODE_MDIO BIT(7) +-#define RT305X_GPIO_MODE_SDRAM BIT(8) +-#define RT305X_GPIO_MODE_RGMII BIT(9) ++#define RT305X_GPIO_MODE_UARTF 0 ++#define RT305X_GPIO_MODE_PCM_UARTF 1 ++#define RT305X_GPIO_MODE_PCM_I2S 2 ++#define RT305X_GPIO_MODE_I2S_UARTF 3 ++#define RT305X_GPIO_MODE_PCM_GPIO 4 ++#define RT305X_GPIO_MODE_GPIO_UARTF 5 ++#define RT305X_GPIO_MODE_GPIO_I2S 6 ++#define RT305X_GPIO_MODE_GPIO 7 ++ ++#define RT305X_GPIO_MODE_I2C 0 ++#define RT305X_GPIO_MODE_SPI 1 ++#define RT305X_GPIO_MODE_UART1 5 ++#define RT305X_GPIO_MODE_JTAG 6 ++#define RT305X_GPIO_MODE_MDIO 7 ++#define RT305X_GPIO_MODE_SDRAM 8 ++#define RT305X_GPIO_MODE_RGMII 9 ++#define RT5350_GPIO_MODE_PHY_LED 14 ++#define RT3352_GPIO_MODE_LNA 18 ++#define RT3352_GPIO_MODE_PA 20 + + #define RT3352_SYSC_REG_SYSCFG0 0x010 + #define RT3352_SYSC_REG_SYSCFG1 0x014 +Index: linux-3.10.9/arch/mips/include/asm/mach-ralink/mt7620.h +=================================================================== +--- linux-3.10.9.orig/arch/mips/include/asm/mach-ralink/mt7620.h 2013-08-28 16:34:42.625951682 +0200 ++++ linux-3.10.9/arch/mips/include/asm/mach-ralink/mt7620.h 2013-08-28 18:32:38.370254386 +0200 +@@ -59,7 +59,6 @@ + #define MT7620_DDR2_SIZE_MIN 32 + #define MT7620_DDR2_SIZE_MAX 256 + +-#define MT7620_GPIO_MODE_I2C BIT(0) + #define MT7620_GPIO_MODE_UART0_SHIFT 2 + #define MT7620_GPIO_MODE_UART0_MASK 0x7 + #define MT7620_GPIO_MODE_UART0(x) ((x) << MT7620_GPIO_MODE_UART0_SHIFT) +@@ -71,15 +70,17 @@ + #define MT7620_GPIO_MODE_GPIO_UARTF 0x5 + #define MT7620_GPIO_MODE_GPIO_I2S 0x6 + #define MT7620_GPIO_MODE_GPIO 0x7 +-#define MT7620_GPIO_MODE_UART1 BIT(5) +-#define MT7620_GPIO_MODE_MDIO BIT(8) +-#define MT7620_GPIO_MODE_RGMII1 BIT(9) +-#define MT7620_GPIO_MODE_RGMII2 BIT(10) +-#define MT7620_GPIO_MODE_SPI BIT(11) +-#define MT7620_GPIO_MODE_SPI_REF_CLK BIT(12) +-#define MT7620_GPIO_MODE_WLED BIT(13) +-#define MT7620_GPIO_MODE_JTAG BIT(15) +-#define MT7620_GPIO_MODE_EPHY BIT(15) +-#define MT7620_GPIO_MODE_WDT BIT(22) ++ ++#define MT7620_GPIO_MODE_I2C 0 ++#define MT7620_GPIO_MODE_UART1 5 ++#define MT7620_GPIO_MODE_MDIO 8 ++#define MT7620_GPIO_MODE_RGMII1 9 ++#define MT7620_GPIO_MODE_RGMII2 10 ++#define MT7620_GPIO_MODE_SPI 11 ++#define MT7620_GPIO_MODE_SPI_REF_CLK 12 ++#define MT7620_GPIO_MODE_WLED 13 ++#define MT7620_GPIO_MODE_JTAG 15 ++#define MT7620_GPIO_MODE_EPHY 15 ++#define MT7620_GPIO_MODE_WDT 22 + + #endif +Index: linux-3.10.9/arch/mips/include/asm/mach-ralink/rt3883.h +=================================================================== +--- linux-3.10.9.orig/arch/mips/include/asm/mach-ralink/rt3883.h 2013-08-21 00:40:47.000000000 +0200 ++++ linux-3.10.9/arch/mips/include/asm/mach-ralink/rt3883.h 2013-08-28 18:33:57.554258201 +0200 +@@ -112,8 +112,6 @@ + #define RT3883_CLKCFG1_PCI_CLK_EN BIT(19) + #define RT3883_CLKCFG1_UPHY0_CLK_EN BIT(18) + +-#define RT3883_GPIO_MODE_I2C BIT(0) +-#define RT3883_GPIO_MODE_SPI BIT(1) + #define RT3883_GPIO_MODE_UART0_SHIFT 2 + #define RT3883_GPIO_MODE_UART0_MASK 0x7 + #define RT3883_GPIO_MODE_UART0(x) ((x) << RT3883_GPIO_MODE_UART0_SHIFT) +@@ -125,11 +123,15 @@ + #define RT3883_GPIO_MODE_GPIO_UARTF 0x5 + #define RT3883_GPIO_MODE_GPIO_I2S 0x6 + #define RT3883_GPIO_MODE_GPIO 0x7 +-#define RT3883_GPIO_MODE_UART1 BIT(5) +-#define RT3883_GPIO_MODE_JTAG BIT(6) +-#define RT3883_GPIO_MODE_MDIO BIT(7) +-#define RT3883_GPIO_MODE_GE1 BIT(9) +-#define RT3883_GPIO_MODE_GE2 BIT(10) ++ ++#define RT3883_GPIO_MODE_I2C 0 ++#define RT3883_GPIO_MODE_SPI 1 ++#define RT3883_GPIO_MODE_UART1 5 ++#define RT3883_GPIO_MODE_JTAG 6 ++#define RT3883_GPIO_MODE_MDIO 7 ++#define RT3883_GPIO_MODE_GE1 9 ++#define RT3883_GPIO_MODE_GE2 10 ++ + #define RT3883_GPIO_MODE_PCI_SHIFT 11 + #define RT3883_GPIO_MODE_PCI_MASK 0x7 + #define RT3883_GPIO_MODE_PCI (RT3883_GPIO_MODE_PCI_MASK << RT3883_GPIO_MODE_PCI_SHIFT) +Index: linux-3.10.9/arch/mips/ralink/common.h +=================================================================== +--- linux-3.10.9.orig/arch/mips/ralink/common.h 2013-08-28 16:34:42.453951675 +0200 ++++ linux-3.10.9/arch/mips/ralink/common.h 2013-08-28 18:10:55.014197854 +0200 +@@ -11,25 +11,6 @@ + + #define RAMIPS_SYS_TYPE_LEN 32 + +-struct ralink_pinmux_grp { +- const char *name; +- u32 mask; +- int gpio_first; +- int gpio_last; +-}; +- +-struct ralink_pinmux { +- struct ralink_pinmux_grp *mode; +- struct ralink_pinmux_grp *uart; +- int uart_shift; +- u32 uart_mask; +- void (*wdt_reset)(void); +- struct ralink_pinmux_grp *pci; +- int pci_shift; +- u32 pci_mask; +-}; +-extern struct ralink_pinmux rt_gpio_pinmux; +- + struct ralink_soc_info { + unsigned char sys_type[RAMIPS_SYS_TYPE_LEN]; + unsigned char *compatible; +Index: linux-3.10.9/arch/mips/ralink/rt3883.c +=================================================================== +--- linux-3.10.9.orig/arch/mips/ralink/rt3883.c 2013-08-21 00:40:47.000000000 +0200 ++++ linux-3.10.9/arch/mips/ralink/rt3883.c 2013-08-28 18:47:07.442290690 +0200 +@@ -17,132 +17,50 @@ + #include + #include + #include ++#include + + #include "common.h" + +-static struct ralink_pinmux_grp mode_mux[] = { +- { +- .name = "i2c", +- .mask = RT3883_GPIO_MODE_I2C, +- .gpio_first = RT3883_GPIO_I2C_SD, +- .gpio_last = RT3883_GPIO_I2C_SCLK, +- }, { +- .name = "spi", +- .mask = RT3883_GPIO_MODE_SPI, +- .gpio_first = RT3883_GPIO_SPI_CS0, +- .gpio_last = RT3883_GPIO_SPI_MISO, +- }, { +- .name = "uartlite", +- .mask = RT3883_GPIO_MODE_UART1, +- .gpio_first = RT3883_GPIO_UART1_TXD, +- .gpio_last = RT3883_GPIO_UART1_RXD, +- }, { +- .name = "jtag", +- .mask = RT3883_GPIO_MODE_JTAG, +- .gpio_first = RT3883_GPIO_JTAG_TDO, +- .gpio_last = RT3883_GPIO_JTAG_TCLK, +- }, { +- .name = "mdio", +- .mask = RT3883_GPIO_MODE_MDIO, +- .gpio_first = RT3883_GPIO_MDIO_MDC, +- .gpio_last = RT3883_GPIO_MDIO_MDIO, +- }, { +- .name = "ge1", +- .mask = RT3883_GPIO_MODE_GE1, +- .gpio_first = RT3883_GPIO_GE1_TXD0, +- .gpio_last = RT3883_GPIO_GE1_RXCLK, +- }, { +- .name = "ge2", +- .mask = RT3883_GPIO_MODE_GE2, +- .gpio_first = RT3883_GPIO_GE2_TXD0, +- .gpio_last = RT3883_GPIO_GE2_RXCLK, +- }, { +- .name = "pci", +- .mask = RT3883_GPIO_MODE_PCI, +- .gpio_first = RT3883_GPIO_PCI_AD0, +- .gpio_last = RT3883_GPIO_PCI_AD31, +- }, { +- .name = "lna a", +- .mask = RT3883_GPIO_MODE_LNA_A, +- .gpio_first = RT3883_GPIO_LNA_PE_A0, +- .gpio_last = RT3883_GPIO_LNA_PE_A2, +- }, { +- .name = "lna g", +- .mask = RT3883_GPIO_MODE_LNA_G, +- .gpio_first = RT3883_GPIO_LNA_PE_G0, +- .gpio_last = RT3883_GPIO_LNA_PE_G2, +- }, {0} ++static struct rt2880_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) }; ++static struct rt2880_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) }; ++static struct rt2880_pmx_func uartf_func[] = { ++ FUNC("uartf", RT3883_GPIO_MODE_UARTF, 7, 8), ++ FUNC("pcm uartf", RT3883_GPIO_MODE_PCM_UARTF, 7, 8), ++ FUNC("pcm i2s", RT3883_GPIO_MODE_PCM_I2S, 7, 8), ++ FUNC("i2s uartf", RT3883_GPIO_MODE_I2S_UARTF, 7, 8), ++ FUNC("pcm gpio", RT3883_GPIO_MODE_PCM_GPIO, 11, 4), ++ FUNC("gpio uartf", RT3883_GPIO_MODE_GPIO_UARTF, 7, 4), ++ FUNC("gpio i2s", RT3883_GPIO_MODE_GPIO_I2S, 7, 4), + }; +- +-static struct ralink_pinmux_grp uart_mux[] = { +- { +- .name = "uartf", +- .mask = RT3883_GPIO_MODE_UARTF, +- .gpio_first = RT3883_GPIO_7, +- .gpio_last = RT3883_GPIO_14, +- }, { +- .name = "pcm uartf", +- .mask = RT3883_GPIO_MODE_PCM_UARTF, +- .gpio_first = RT3883_GPIO_7, +- .gpio_last = RT3883_GPIO_14, +- }, { +- .name = "pcm i2s", +- .mask = RT3883_GPIO_MODE_PCM_I2S, +- .gpio_first = RT3883_GPIO_7, +- .gpio_last = RT3883_GPIO_14, +- }, { +- .name = "i2s uartf", +- .mask = RT3883_GPIO_MODE_I2S_UARTF, +- .gpio_first = RT3883_GPIO_7, +- .gpio_last = RT3883_GPIO_14, +- }, { +- .name = "pcm gpio", +- .mask = RT3883_GPIO_MODE_PCM_GPIO, +- .gpio_first = RT3883_GPIO_11, +- .gpio_last = RT3883_GPIO_14, +- }, { +- .name = "gpio uartf", +- .mask = RT3883_GPIO_MODE_GPIO_UARTF, +- .gpio_first = RT3883_GPIO_7, +- .gpio_last = RT3883_GPIO_10, +- }, { +- .name = "gpio i2s", +- .mask = RT3883_GPIO_MODE_GPIO_I2S, +- .gpio_first = RT3883_GPIO_7, +- .gpio_last = RT3883_GPIO_10, +- }, { +- .name = "gpio", +- .mask = RT3883_GPIO_MODE_GPIO, +- }, {0} ++static struct rt2880_pmx_func uartlite_func[] = { FUNC("uartlite", 0, 15, 2) }; ++static struct rt2880_pmx_func jtag_func[] = { FUNC("jtag", 0, 17, 25) }; ++static struct rt2880_pmx_func mdio_func[] = { FUNC("mdio", 0, 22, 2) }; ++static struct rt2880_pmx_func lna_a_func[] = { FUNC("lna a", 0, 32, 3) }; ++static struct rt2880_pmx_func lna_g_func[] = { FUNC("lna a", 0, 35, 3) }; ++static struct rt2880_pmx_func pci_func[] = { ++ FUNC("pci-dev", 0, 40, 32), ++ FUNC("pci-host2", 1, 40, 32), ++ FUNC("pci-host1", 2, 40, 32), ++ FUNC("pci-fnc", 3, 40, 32) + }; ++static struct rt2880_pmx_func ge1_func[] = { FUNC("ge1", 0, 72, 12) }; ++static struct rt2880_pmx_func ge2_func[] = { FUNC("ge1", 0, 84, 12) }; + +-static struct ralink_pinmux_grp pci_mux[] = { +- { +- .name = "pci-dev", +- .mask = 0, +- .gpio_first = RT3883_GPIO_PCI_AD0, +- .gpio_last = RT3883_GPIO_PCI_AD31, +- }, { +- .name = "pci-host2", +- .mask = 1, +- .gpio_first = RT3883_GPIO_PCI_AD0, +- .gpio_last = RT3883_GPIO_PCI_AD31, +- }, { +- .name = "pci-host1", +- .mask = 2, +- .gpio_first = RT3883_GPIO_PCI_AD0, +- .gpio_last = RT3883_GPIO_PCI_AD31, +- }, { +- .name = "pci-fnc", +- .mask = 3, +- .gpio_first = RT3883_GPIO_PCI_AD0, +- .gpio_last = RT3883_GPIO_PCI_AD31, +- }, { +- .name = "pci-gpio", +- .mask = 7, +- .gpio_first = RT3883_GPIO_PCI_AD0, +- .gpio_last = RT3883_GPIO_PCI_AD31, +- }, {0} ++static struct rt2880_pmx_group rt3883_pinmux_data[] = { ++ GRP("i2c", i2c_func, 1, RT3883_GPIO_MODE_I2C), ++ GRP("spi", spi_func, 1, RT3883_GPIO_MODE_SPI), ++ GRP("uartf", uartf_func, RT3883_GPIO_MODE_UART0_MASK, ++ RT3883_GPIO_MODE_UART0_SHIFT), ++ GRP("uartlite", uartlite_func, 1, RT3883_GPIO_MODE_UART1), ++ GRP("jtag", jtag_func, 1, RT3883_GPIO_MODE_JTAG), ++ GRP("mdio", mdio_func, 1, RT3883_GPIO_MODE_MDIO), ++ GRP("lna a", lna_a_func, 1, RT3883_GPIO_MODE_LNA_A), ++ GRP("lna g", lna_g_func, 1, RT3883_GPIO_MODE_LNA_G), ++ GRP("pci", pci_func, RT3883_GPIO_MODE_PCI_MASK, ++ RT3883_GPIO_MODE_PCI_SHIFT), ++ GRP("ge1", ge1_func, 1, RT3883_GPIO_MODE_GE1), ++ GRP("ge2", ge2_func, 1, RT3883_GPIO_MODE_GE2), ++ { 0 } + }; + + static void rt3883_wdt_reset(void) +@@ -155,17 +73,6 @@ + rt_sysc_w32(t, RT3883_SYSC_REG_SYSCFG1); + } + +-struct ralink_pinmux rt_gpio_pinmux = { +- .mode = mode_mux, +- .uart = uart_mux, +- .uart_shift = RT3883_GPIO_MODE_UART0_SHIFT, +- .uart_mask = RT3883_GPIO_MODE_UART0_MASK, +- .wdt_reset = rt3883_wdt_reset, +- .pci = pci_mux, +- .pci_shift = RT3883_GPIO_MODE_PCI_SHIFT, +- .pci_mask = RT3883_GPIO_MODE_PCI_MASK, +-}; +- + void __init ralink_clk_init(void) + { + unsigned long cpu_rate, sys_rate; +@@ -243,4 +150,6 @@ + soc_info->mem_base = RT3883_SDRAM_BASE; + soc_info->mem_size_min = RT3883_MEM_SIZE_MIN; + soc_info->mem_size_max = RT3883_MEM_SIZE_MAX; ++ ++ rt2880_pinmux_data = rt3883_pinmux_data; + } diff --git a/target/linux/ramips/rt305x/config-3.10 b/target/linux/ramips/rt305x/config-3.10 index 47d6d18060..93222447c8 100644 --- a/target/linux/ramips/rt305x/config-3.10 +++ b/target/linux/ramips/rt305x/config-3.10 @@ -1,7 +1,6 @@ CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y CONFIG_ARCH_DISCARD_MEMBLOCK=y CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y -CONFIG_ARCH_HAS_RESET_CONTROLLER=y CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_REQUIRE_GPIOLIB=y @@ -30,11 +29,11 @@ CONFIG_CPU_R4K_FPU=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_CSRC_R4K=y +CONFIG_DEBUG_PINCTRL=y CONFIG_DMA_NONCOHERENT=y # CONFIG_DTB_RT305X_EVAL is not set CONFIG_DTB_RT_NONE=y CONFIG_DTC=y -# CONFIG_DWC_OTG is not set CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_ATOMIC64=y CONFIG_GENERIC_CLOCKEVENTS=y @@ -120,6 +119,11 @@ CONFIG_OF_NET=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_PERF_USE_VMALLOC=y CONFIG_PHYLIB=y +# CONFIG_PINCONF is not set +CONFIG_PINCTRL=y +CONFIG_PINCTRL_RALINK=y +# CONFIG_PINCTRL_SINGLE is not set +CONFIG_PINMUX=y # CONFIG_PREEMPT_RCU is not set CONFIG_RALINK=y CONFIG_RALINK_USBPHY=y diff --git a/target/linux/ramips/rt3883/config-3.10 b/target/linux/ramips/rt3883/config-3.10 index 509af454fb..c01a1e793b 100644 --- a/target/linux/ramips/rt3883/config-3.10 +++ b/target/linux/ramips/rt3883/config-3.10 @@ -2,7 +2,6 @@ CONFIG_AR8216_PHY=y CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y CONFIG_ARCH_DISCARD_MEMBLOCK=y CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y -CONFIG_ARCH_HAS_RESET_CONTROLLER=y CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_REQUIRE_GPIOLIB=y @@ -28,6 +27,7 @@ CONFIG_CPU_R4K_FPU=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_CSRC_R4K=y +CONFIG_DEBUG_PINCTRL=y CONFIG_DMA_NONCOHERENT=y # CONFIG_DTB_RT3883_EVAL is not set CONFIG_DTB_RT_NONE=y @@ -126,6 +126,11 @@ CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PERF_USE_VMALLOC=y CONFIG_PHYLIB=y +# CONFIG_PINCONF is not set +CONFIG_PINCTRL=y +CONFIG_PINCTRL_RALINK=y +# CONFIG_PINCTRL_SINGLE is not set +CONFIG_PINMUX=y # CONFIG_PREEMPT_RCU is not set CONFIG_RALINK=y CONFIG_RALINK_USBPHY=y