From 700e098ab3d666d7e2ef5e3644779cd8dae72ef2 Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Thu, 2 Oct 2014 12:18:58 +0000
Subject: [PATCH] uqmi: use the autoconnect feature

Instead of connecting once and saving the packet data handle, let the
firmware handle connecting/reconnecting automatically. This is more
reliable and reduces reliance on potentially stale data.

Use the global packet data handle to attempt to disable autoconnect
before restarting the connection. This ensures that the firmware will
take the new APN/auth settings.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42721 3c298f89-4303-0410-b956-a3cf2f4a3e73
---
 .../utils/uqmi/files/lib/netifd/proto/qmi.sh  | 35 +++++++++----------
 1 file changed, 17 insertions(+), 18 deletions(-)

diff --git a/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh b/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh
index 6f61281f68..0e5e2e03f2 100755
--- a/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh
+++ b/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh
@@ -17,6 +17,14 @@ proto_qmi_init_config() {
 	proto_config_add_string modes
 }
 
+qmi_disconnect() {
+	# disable previous autoconnect state using the global handle
+	# do not reuse previous wds client id to prevent hangs caused by stale data
+	uqmi -s -d "$device" \
+		--stop-network 0xffffffff \
+		--autoconnect > /dev/null
+}
+
 proto_qmi_setup() {
 	local interface="$1"
 
@@ -68,6 +76,8 @@ proto_qmi_setup() {
 		return 1
 	}
 
+	qmi_disconnect
+
 	echo "Waiting for network registration"
 	while uqmi -s -d "$device" --get-serving-system | grep '"searching"' > /dev/null; do
 		sleep 5;
@@ -83,24 +93,17 @@ proto_qmi_setup() {
 		proto_block_restart "$interface"
 		return 1
 	}
-	uci_set_state network $interface cid "$cid"
 
-	pdh=`uqmi -s -d "$device" --set-client-id wds,"$cid" --start-network "$apn" \
-	${auth:+--auth-type $auth} \
-	${username:+--username $username} \
-	${password:+--password $password}`
-	[ $? -ne 0 ] && {
-		echo "Unable to connect, check APN and authentication"
-		proto_notify_error "$interface" NO_PDH
-		proto_block_restart "$interface"
-		return 1
-	}
-	uci_set_state network $interface pdh "$pdh"
+	uqmi -s -d "$device" --set-client-id wds,"$cid" \
+		--start-network "$apn" \
+		${auth:+--auth-type $auth} \
+		${username:+--username $username} \
+		${password:+--password $password} \
+		--autoconnect > /dev/null
 
 	if ! uqmi -s -d "$device" --get-data-status | grep '"connected"' > /dev/null; then
 		echo "Connection lost"
 		proto_notify_error "$interface" NOT_CONNECTED
-		proto_block_restart "$interface"
 		return 1
 	fi
 
@@ -129,14 +132,10 @@ proto_qmi_teardown() {
 	local device
 	json_get_vars device
 	local cid=$(uci_get_state network $interface cid)
-	local pdh=$(uci_get_state network $interface pdh)
 
 	echo "Stopping network"
+	qmi_disconnect
 	[ -n "$cid" ] && {
-		[ -n "$pdh" ] && {
-			uqmi -s -d "$device" --set-client-id wds,"$cid" --stop-network "$pdh"
-			uci_revert_state network $interface pdh
-		}
 		uqmi -s -d "$device" --set-client-id wds,"$cid" --release-client-id wds
 		uci_revert_state network $interface cid
 	}