Forgot to make i2c driver depend on i2c bit banging algorithm

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5919 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-12-28 17:53:25 +00:00 · 2006-12-28 17:53:25 +00:00 · 6933d24047
parent dc37acd85f
commit 6933d24047
1 changed files with 3 additions and 2 deletions
--- a/target/linux/au1000-2.6/patches/010-au100_gpio_i2c.patch
+++ b/target/linux/au1000-2.6/patches/010-au100_gpio_i2c.patch
@ -1,13 +1,14 @@
 diff -urN linux-2.6.19/drivers/i2c/busses/Kconfig linux-2.6.19.new/drivers/i2c/busses/Kconfig
 --- linux-2.6.19/drivers/i2c/busses/Kconfig	2006-11-29 22:57:37.000000000 +0100
 +++ linux-2.6.19.new/drivers/i2c/busses/Kconfig	2006-12-28 17:04:34.000000000 +0100
-@@ -84,6 +84,16 @@
+@@ -84,6 +84,17 @@
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-au1550.
 
 +config I2C_AU1X00GPIO
 +	tristate "Au1x00 i2c using GPIO pins"
-+	depends on I2C && MIPS_MTX1
+	depends on I2C
+	select I2C_ALGOBIT
 +	help
 +	  If you say yest to this option, support will be included for the
 +	  Au1x00 GPIO interface.