avr32: upgrade to 2.6.25.6

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11450 3c298f89-4303-0410-b956-a3cf2f4a3e73

target/linux/avr32/Makefile

@@ -10,7 +10,7 @@ ARCH:=avr32
 BOARD:=avr32
 BOARDNAME:=Atmel AVR32
 FEATURES:=squashfs
-LINUX_VERSION:=2.6.24.7
+LINUX_VERSION:=2.6.25.6
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/avr32/config-default

@@ -7,10 +7,13 @@ CONFIG_AP700X_16_BIT_SMC=y
 # CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
 # CONFIG_ARCH_SPARSEMEM_ENABLE is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_AT32AP700X_WDT=m
 # CONFIG_ATMEL_PWM is not set
 # CONFIG_ATMEL_SSC is not set
-# CONFIG_ATMEL_TCLIB is not set
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+CONFIG_ATMEL_TCLIB=y
 CONFIG_AVR32=y
 CONFIG_BASE_SMALL=0
 CONFIG_BITREVERSE=y
@@ -19,25 +22,38 @@ CONFIG_BOARD_ATNGW100=y
 # CONFIG_BOARD_ATSTK1000 is not set
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_BT is not set
+CONFIG_CLASSIC_RCU=y
 CONFIG_CPU_AT32AP7000=y
 CONFIG_CPU_AT32AP700X=y
 # CONFIG_CPU_FREQ is not set
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_GF128MUL=m
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DW_DMAC=y
+# CONFIG_E1000E_ENABLED is not set
 CONFIG_ENTRY_ADDRESS=0x90000000
 # CONFIG_FIXED_PHY is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_GENERIC_ALLOCATOR=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_GENERIC_GPIO=y
-# CONFIG_GEN_RTC is not set
 # CONFIG_GPIO_DEV is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_HAS_DMA=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 # CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
+CONFIG_HAVE_GPIO_LIB=y
+# CONFIG_HAVE_IDE is not set
+CONFIG_HAVE_KPROBES=y
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_HAVE_OPROFILE=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 # CONFIG_I2C_ALGOBIT is not set
@@ -47,14 +63,23 @@ CONFIG_I2C_BOARDINFO=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IDE is not set
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_LEDS_ALIX is not set
 CONFIG_LEDS_GPIO=y
 CONFIG_LOADER_U_BOOT=y
 CONFIG_LOAD_ADDRESS=0x10000000
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
 CONFIG_MACB=y
 # CONFIG_MDIO_BITBANG is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_MMC=m
+CONFIG_MMC_ATMELMCI=m
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
 CONFIG_MTD=y
 # CONFIG_MTD_ABSENT is not set
 CONFIG_MTD_BLKDEVS=y
@@ -104,16 +129,40 @@ CONFIG_MTD_PHYSMAP_START=0x80000000
 # CONFIG_NMI_DEBUGGING is not set
 CONFIG_NO_HZ=y
 # CONFIG_OWNERSHIP_TRACE is not set
-# CONFIG_PATA_AT32 is not set
 CONFIG_PERFORMANCE_COUNTERS=y
 CONFIG_PHYLIB=y
 CONFIG_PHYS_OFFSET=0x10000000
 CONFIG_PLATFORM_AT32AP=y
 # CONFIG_QSEMI_PHY is not set
-# CONFIG_RTC is not set
+# CONFIG_REALTEK_PHY is not set
+CONFIG_RTC_CLASS=m
+CONFIG_RTC_DRV_AT32AP700X=m
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_V3020 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_LIB=m
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_SCSI_WAIT_SCAN=m
+# CONFIG_SDIO_UART is not set
 # CONFIG_SERIAL_8250 is not set
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
@@ -122,6 +171,7 @@ CONFIG_SERIAL_ATMEL_PDC=y
 CONFIG_SLABINFO=y
 # CONFIG_SMSC_PHY is not set
 # CONFIG_SND_ATMEL_AC97 is not set
+# CONFIG_SOFT_WATCHDOG is not set
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_SPI=y
@@ -133,11 +183,11 @@ CONFIG_SPI_MASTER=y
 CONFIG_SSB_POSSIBLE=y
 CONFIG_SUBARCH_AVR32B=y
 CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_THERMAL is not set
 CONFIG_TICK_ONESHOT=y
 # CONFIG_USB_ARCH_HAS_EHCI is not set
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USER_NS is not set
 # CONFIG_VGASTATE is not set
-# CONFIG_WATCHDOG is not set
+CONFIG_VIDEO_V4L2_COMMON=m
 CONFIG_ZONE_DMA_FLAG=0

target/linux/avr32/patches/120-cpufreq_panic.patch

@@ -1,25 +0,0 @@
-From: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
-Date: Tue, 27 May 2008 07:37:42 +0000 (+0200)
-Subject: avr32: Fix cpufreq oops when ondemand governor is default
-X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Fhskinnemoen%2Favr32-2.6.git;a=commitdiff_plain;h=f04d264afc51acdffeba9cdf3baf04116687680c
-
-avr32: Fix cpufreq oops when ondemand governor is default
-
-Move the AP7 cpufreq init to late_initcall() so that we don't try to
-bring up cpufreq until the governor is ready. x86 also uses
-late_initcall() for this.
-
-Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
----
-
-diff --git a/arch/avr32/mach-at32ap/cpufreq.c b/arch/avr32/mach-at32ap/cpufreq.c
-index 235524b..5dd8d25 100644
---- a/arch/avr32/mach-at32ap/cpufreq.c
-+++ b/arch/avr32/mach-at32ap/cpufreq.c
-@@ -108,5 +108,4 @@ static int __init at32_cpufreq_init(void)
- {
- 	return cpufreq_register_driver(&at32_driver);
- }
--
--arch_initcall(at32_cpufreq_init);
-+late_initcall(at32_cpufreq_init);