target/linux: refresh 2.6.32 patches

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21566 3c298f89-4303-0410-b956-a3cf2f4a3e73
master
Nicolas Thill 2010-05-24 20:35:46 +00:00
parent cfbeeb7b85
commit 6598259ef5
42 changed files with 142 additions and 171 deletions

View File

@ -6,11 +6,9 @@
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Index: linux-2.6.32.12/arch/mips/ar7/platform.c
===================================================================
--- linux-2.6.32.12.orig/arch/mips/ar7/platform.c 2010-05-15 18:01:11.000000000 +0200
+++ linux-2.6.32.12/arch/mips/ar7/platform.c 2010-05-15 18:02:44.000000000 +0200
@@ -509,7 +509,7 @@
--- a/arch/mips/ar7/platform.c
+++ b/arch/mips/ar7/platform.c
@@ -509,7 +509,7 @@ static int __init ar7_register_devices(v
memset(uart_port, 0, sizeof(struct uart_port) * 2);
@ -19,7 +17,7 @@ Index: linux-2.6.32.12/arch/mips/ar7/platform.c
uart_port[0].line = 0;
uart_port[0].irq = AR7_IRQ_UART0;
uart_port[0].uartclk = ar7_bus_freq() / 2;
@@ -524,7 +524,7 @@
@@ -524,7 +524,7 @@ static int __init ar7_register_devices(v
/* Only TNETD73xx have a second serial port */
if (ar7_has_second_uart()) {

View File

@ -30,7 +30,7 @@
depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx)
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1141,6 +1141,11 @@ MODULE_LICENSE ("GPL");
@@ -1142,6 +1142,11 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER ehci_atmel_driver
#endif

View File

@ -12,7 +12,7 @@
/* makes sure the async qh will become idle */
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -129,6 +129,7 @@ struct ehci_hcd { /* one per controlle
@@ -130,6 +130,7 @@ struct ehci_hcd { /* one per controlle
unsigned has_amcc_usb23:1;
unsigned need_io_watchdog:1;
unsigned broken_periodic:1;

View File

@ -164,7 +164,7 @@ Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
+MODULE_ALIAS("platform:bcm63xx_ehci");
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1141,6 +1141,11 @@ MODULE_LICENSE ("GPL");
@@ -1142,6 +1142,11 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER ehci_atmel_driver
#endif

View File

@ -11,7 +11,7 @@
static struct gpio_led_platform_data bcm63xx_led_data;
static struct platform_device bcm63xx_gpio_leds = {
@@ -853,6 +857,8 @@ int __init board_register_devices(void)
@@ -854,6 +858,8 @@ int __init board_register_devices(void)
platform_device_register(&mtd_dev);

View File

@ -79,4 +79,4 @@
+ struct gpio_led leds[8];
/* Buttons */
struct gpio_button buttons[1];
struct gpio_button buttons[2];

View File

@ -16,7 +16,7 @@
};
static struct board_info __initdata board_rta1025w_16 = {
@@ -949,6 +951,9 @@ int __init board_register_devices(void)
@@ -950,6 +952,9 @@ int __init board_register_devices(void)
if (board.has_dsp)
bcm63xx_dsp_register(&board.dsp);

View File

@ -937,7 +937,7 @@
obj-y += boards/
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -29,6 +29,7 @@
@@ -30,6 +30,7 @@
#include <bcm63xx_dev_usb_ohci.h>
#include <bcm63xx_dev_usb_ehci.h>
#include <bcm63xx_dev_usb_udc.h>
@ -945,7 +945,7 @@
#include <board_bcm963xx.h>
#define PFX "board_bcm963xx: "
@@ -998,6 +999,9 @@ int __init board_register_devices(void)
@@ -1495,6 +1496,9 @@ int __init board_register_devices(void)
if (board.has_udc0)
bcm63xx_udc_register();

View File

@ -1,6 +1,6 @@
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -1308,6 +1308,8 @@ void __init board_prom_init(void)
@@ -1338,6 +1338,8 @@ void __init board_prom_init(void)
if (BCMCPU_IS_6348())
val |= GPIO_MODE_6348_G3_EXT_MII |
GPIO_MODE_6348_G0_EXT_MII;

View File

@ -1,8 +1,6 @@
Index: linux-2.6.32.12/drivers/usb/host/ehci-hub.c
===================================================================
--- linux-2.6.32.12.orig/drivers/usb/host/ehci-hub.c 2010-05-02 21:06:45.000000000 +0200
+++ linux-2.6.32.12/drivers/usb/host/ehci-hub.c 2010-05-02 21:07:08.000000000 +0200
@@ -741,11 +741,13 @@
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -741,11 +741,13 @@ static int ehci_hub_control (
* power switching; they're allowed to just limit the
* current. khubd will turn the power back on.
*/

View File

@ -26,7 +26,7 @@
1: mcr p15, 0, r0, c1, c0, 0 @ load control register
mrc p15, 0, r0, c1, c0, 0 @ and read it back to
sub pc, lr, r0, lsr #32 @ properly flush pipeline
@@ -539,7 +540,7 @@ __common_mmu_cache_on:
@@ -538,7 +539,7 @@ __common_mmu_cache_on:
* r8 = atags pointer
* r9-r12,r14 = corrupted
*/
@ -35,8 +35,8 @@
reloc_start: add r9, r5, r0
sub r9, r9, #128 @ do not copy the stack
debug_reloc_start
@@ -768,7 +769,7 @@ proc_types:
* On exit, r0, r1, r2, r3, r12 corrupted
@@ -766,7 +767,7 @@ proc_types:
* On exit, r0, r1, r2, r3, r9, r12 corrupted
* This routine must preserve: r4, r6, r7
*/
- .align 5
@ -44,7 +44,7 @@
cache_off: mov r3, #12 @ cache_off function
b call_cache_fn
@@ -845,7 +846,7 @@ __armv3_mmu_cache_off:
@@ -841,7 +842,7 @@ __armv3_mmu_cache_off:
* This routine must preserve:
* r0, r4, r5, r6, r7
*/
@ -4640,7 +4640,7 @@
}
/* ehci_shutdown kick in for silicon on any bus (not just pci, etc).
@@ -653,7 +656,9 @@ static int ehci_run (struct usb_hcd *hcd
@@ -654,7 +657,9 @@ static int ehci_run (struct usb_hcd *hcd
// Philips, Intel, and maybe others need CMD_RUN before the
// root hub will detect new devices (why?); NEC doesn't
ehci->command &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET);
@ -4650,7 +4650,7 @@
ehci_writel(ehci, ehci->command, &ehci->regs->command);
dbg_cmd (ehci, "init", ehci->command);
@@ -673,9 +678,11 @@ static int ehci_run (struct usb_hcd *hcd
@@ -674,9 +679,11 @@ static int ehci_run (struct usb_hcd *hcd
*/
down_write(&ehci_cf_port_reset_rwsem);
hcd->state = HC_STATE_RUNNING;
@ -4662,7 +4662,7 @@
up_write(&ehci_cf_port_reset_rwsem);
ehci->last_periodic_enable = ktime_get_real();
@@ -767,9 +774,10 @@ static irqreturn_t ehci_irq (struct usb_
@@ -768,9 +775,10 @@ static irqreturn_t ehci_irq (struct usb_
pcd_status = status;
/* resume root hub? */
@ -4674,7 +4674,7 @@
while (i--) {
int pstatus = ehci_readl(ehci,
&ehci->regs->port_status [i]);
@@ -802,7 +810,9 @@ static irqreturn_t ehci_irq (struct usb_
@@ -803,7 +811,9 @@ static irqreturn_t ehci_irq (struct usb_
ehci_halt(ehci);
dead:
ehci_reset(ehci);
@ -4684,7 +4684,7 @@
/* generic layer kills/unlinks all urbs, then
* uses ehci_stop to clean up the rest
*/
@@ -1101,6 +1111,11 @@ MODULE_LICENSE ("GPL");
@@ -1102,6 +1112,11 @@ MODULE_LICENSE ("GPL");
#define PCI_DRIVER ehci_pci_driver
#endif

View File

@ -11,11 +11,9 @@ Changes from v2:
- removed pci_dev accessors
- use DEFINE_PCI_DEVICE_TABLE
Index: linux-2.6.32.10/drivers/mfd/Kconfig
===================================================================
--- linux-2.6.32.10.orig/drivers/mfd/Kconfig 2010-03-15 16:52:04.000000000 +0100
+++ linux-2.6.32.10/drivers/mfd/Kconfig 2010-05-15 21:48:27.000000000 +0200
@@ -305,6 +305,15 @@
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -305,6 +305,15 @@ config EZX_PCAP
This enables the PCAP ASIC present on EZX Phones. This is
needed for MMC, TouchScreen, Sound, USB, etc..
@ -31,20 +29,16 @@ Index: linux-2.6.32.10/drivers/mfd/Kconfig
endmenu
menu "Multimedia Capabilities Port drivers"
Index: linux-2.6.32.10/drivers/mfd/Makefile
===================================================================
--- linux-2.6.32.10.orig/drivers/mfd/Makefile 2010-03-15 16:52:04.000000000 +0100
+++ linux-2.6.32.10/drivers/mfd/Makefile 2010-05-15 21:48:27.000000000 +0200
@@ -50,3 +50,5 @@
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -50,3 +50,5 @@ obj-$(CONFIG_PCF50633_ADC) += pcf50633-a
obj-$(CONFIG_PCF50633_GPIO) += pcf50633-gpio.o
obj-$(CONFIG_AB3100_CORE) += ab3100-core.o
obj-$(CONFIG_AB3100_OTP) += ab3100-otp.o
+
+obj-$(CONFIG_MFD_RDC321X) += rdc321x-southbridge.o
Index: linux-2.6.32.10/drivers/mfd/rdc321x-southbridge.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.32.10/drivers/mfd/rdc321x-southbridge.c 2010-05-15 22:53:39.000000000 +0200
--- /dev/null
+++ b/drivers/mfd/rdc321x-southbridge.c
@@ -0,0 +1,123 @@
+/*
+ * RDC321x MFD southbrige driver
@ -169,10 +163,8 @@ Index: linux-2.6.32.10/drivers/mfd/rdc321x-southbridge.c
+MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("RDC R-321x MFD southbridge driver");
Index: linux-2.6.32.10/include/linux/mfd/rdc321x.h
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.32.10/include/linux/mfd/rdc321x.h 2010-05-15 21:48:27.000000000 +0200
--- /dev/null
+++ b/include/linux/mfd/rdc321x.h
@@ -0,0 +1,26 @@
+#ifndef __RDC321X_MFD_H
+#define __RDC321X_MFD_H

View File

@ -8,11 +8,9 @@ Changes from v2:
- use the pci_dev pointer passed as platform data
- replaced rdc321x_pci_{read,write}
Index: linux-2.6.32.10/drivers/gpio/Kconfig
===================================================================
--- linux-2.6.32.10.orig/drivers/gpio/Kconfig 2010-05-15 22:54:31.000000000 +0200
+++ linux-2.6.32.10/drivers/gpio/Kconfig 2010-05-15 22:54:51.000000000 +0200
@@ -196,6 +196,14 @@
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -196,6 +196,14 @@ config GPIO_LANGWELL
help
Say Y here to support Intel Moorestown platform GPIO.
@ -27,19 +25,15 @@ Index: linux-2.6.32.10/drivers/gpio/Kconfig
comment "SPI GPIO expanders:"
config GPIO_MAX7301
Index: linux-2.6.32.10/drivers/gpio/Makefile
===================================================================
--- linux-2.6.32.10.orig/drivers/gpio/Makefile 2010-05-15 22:54:31.000000000 +0200
+++ linux-2.6.32.10/drivers/gpio/Makefile 2010-05-15 22:54:51.000000000 +0200
@@ -19,3 +19,4 @@
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -19,3 +19,4 @@ obj-$(CONFIG_GPIO_XILINX) += xilinx_gpio
obj-$(CONFIG_GPIO_BT8XX) += bt8xxgpio.o
obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o
obj-$(CONFIG_GPIO_WM831X) += wm831x-gpio.o
+obj-$(CONFIG_GPIO_RDC321X) += rdc321x-gpio.o
Index: linux-2.6.32.10/drivers/gpio/rdc321x-gpio.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.32.10/drivers/gpio/rdc321x-gpio.c 2010-05-15 22:55:10.000000000 +0200
--- /dev/null
+++ b/drivers/gpio/rdc321x-gpio.c
@@ -0,0 +1,245 @@
+/*
+ * RDC321x GPIO driver

View File

@ -10,10 +10,8 @@ Changes from v2:
- replaced rdc321x_pci_{read,write}
- use the pci_dev pointer passed as platform_data
Index: linux-2.6.32.10/drivers/watchdog/rdc321x_wdt.c
===================================================================
--- linux-2.6.32.10.orig/drivers/watchdog/rdc321x_wdt.c 2010-05-15 22:14:28.000000000 +0200
+++ linux-2.6.32.10/drivers/watchdog/rdc321x_wdt.c 2010-05-15 22:15:24.000000000 +0200
--- a/drivers/watchdog/rdc321x_wdt.c
+++ b/drivers/watchdog/rdc321x_wdt.c
@@ -1,7 +1,7 @@
/*
* RDC321x watchdog driver
@ -33,7 +31,7 @@ Index: linux-2.6.32.10/drivers/watchdog/rdc321x_wdt.c
#define RDC_WDT_MASK 0x80000000 /* Mask */
#define RDC_WDT_EN 0x00800000 /* Enable bit */
@@ -63,6 +62,8 @@
@@ -63,6 +62,8 @@ static struct {
int default_ticks;
unsigned long inuse;
spinlock_t lock;
@ -42,7 +40,7 @@ Index: linux-2.6.32.10/drivers/watchdog/rdc321x_wdt.c
} rdc321x_wdt_device;
/* generic helper functions */
@@ -70,14 +71,18 @@
@@ -70,14 +71,18 @@ static struct {
static void rdc321x_wdt_trigger(unsigned long unused)
{
unsigned long flags;
@ -63,7 +61,7 @@ Index: linux-2.6.32.10/drivers/watchdog/rdc321x_wdt.c
spin_unlock_irqrestore(&rdc321x_wdt_device.lock, flags);
/* requeue?? */
@@ -105,10 +110,13 @@
@@ -105,10 +110,13 @@ static void rdc321x_wdt_start(void)
/* Clear the timer */
spin_lock_irqsave(&rdc321x_wdt_device.lock, flags);
@ -79,7 +77,7 @@ Index: linux-2.6.32.10/drivers/watchdog/rdc321x_wdt.c
spin_unlock_irqrestore(&rdc321x_wdt_device.lock, flags);
mod_timer(&rdc321x_wdt_device.timer,
@@ -148,7 +156,7 @@
@@ -148,7 +156,7 @@ static long rdc321x_wdt_ioctl(struct fil
unsigned long arg)
{
void __user *argp = (void __user *)arg;
@ -88,7 +86,7 @@ Index: linux-2.6.32.10/drivers/watchdog/rdc321x_wdt.c
static struct watchdog_info ident = {
.options = WDIOF_CARDRESET,
.identity = "RDC321x WDT",
@@ -162,9 +170,10 @@
@@ -162,9 +170,10 @@ static long rdc321x_wdt_ioctl(struct fil
case WDIOC_GETSTATUS:
/* Read the value from the DATA register */
spin_lock_irqsave(&rdc321x_wdt_device.lock, flags);
@ -101,7 +99,7 @@ Index: linux-2.6.32.10/drivers/watchdog/rdc321x_wdt.c
return -EFAULT;
break;
case WDIOC_GETSUPPORT:
@@ -219,17 +228,35 @@
@@ -219,17 +228,35 @@ static struct miscdevice rdc321x_wdt_mis
static int __devinit rdc321x_wdt_probe(struct platform_device *pdev)
{
int err;
@ -139,7 +137,7 @@ Index: linux-2.6.32.10/drivers/watchdog/rdc321x_wdt.c
init_completion(&rdc321x_wdt_device.stop);
rdc321x_wdt_device.queue = 0;
@@ -240,7 +267,7 @@
@@ -240,7 +267,7 @@ static int __devinit rdc321x_wdt_probe(s
rdc321x_wdt_device.default_ticks = ticks;

View File

@ -1,8 +1,6 @@
Index: linux-2.6.32.9/scripts/Makefile.lib
===================================================================
--- linux-2.6.32.9.orig/scripts/Makefile.lib 2010-04-13 07:55:06.543296524 +0200
+++ linux-2.6.32.9/scripts/Makefile.lib 2010-04-13 07:55:06.814268461 +0200
@@ -228,7 +228,7 @@
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -228,7 +228,7 @@ cmd_bzip2 = (cat $(filter-out FORCE,$^)
quiet_cmd_lzma = LZMA $@
cmd_lzma = (cat $(filter-out FORCE,$^) | \
@ -11,10 +9,8 @@ Index: linux-2.6.32.9/scripts/Makefile.lib
(rm -f $@ ; false)
quiet_cmd_lzo = LZO $@
Index: linux-2.6.32.9/arch/x86/include/asm/boot.h
===================================================================
--- linux-2.6.32.9.orig/arch/x86/include/asm/boot.h 2010-02-23 16:38:51.000000000 +0100
+++ linux-2.6.32.9/arch/x86/include/asm/boot.h 2010-04-13 08:00:14.474369306 +0200
--- a/arch/x86/include/asm/boot.h
+++ b/arch/x86/include/asm/boot.h
@@ -28,7 +28,7 @@
#error "Invalid value for CONFIG_PHYSICAL_ALIGN"
#endif

View File

@ -1,8 +1,6 @@
diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c
index 4122916..eeee379 100644
--- a/drivers/net/r6040.c
+++ b/drivers/net/r6040.c
@@ -400,9 +400,6 @@ static void r6040_init_mac_regs(struct net_device *dev)
@@ -401,9 +401,6 @@ static void r6040_init_mac_regs(struct n
* we may got called by r6040_tx_timeout which has left
* some unsent tx buffers */
iowrite16(0x01, ioaddr + MTPR);
@ -12,7 +10,7 @@ index 4122916..eeee379 100644
}
static void r6040_tx_timeout(struct net_device *dev)
@@ -530,8 +527,6 @@ static int r6040_phy_mode_chk(struct net_device *dev)
@@ -531,8 +528,6 @@ static int r6040_phy_mode_chk(struct net
phy_dat = 0x0000;
}
@ -21,7 +19,7 @@ index 4122916..eeee379 100644
return phy_dat;
};
@@ -813,6 +808,9 @@ static void r6040_timer(unsigned long data)
@@ -814,6 +809,9 @@ static void r6040_timer(unsigned long da
/* Timer active again */
mod_timer(&lp->timer, round_jiffies(jiffies + HZ));

View File

@ -1,7 +1,5 @@
Index: linux-2.6.32.12/drivers/net/r6040.c
===================================================================
--- linux-2.6.32.12.orig/drivers/net/r6040.c 2010-05-20 10:19:41.000000000 +0200
+++ linux-2.6.32.12/drivers/net/r6040.c 2010-05-20 10:28:48.000000000 +0200
--- a/drivers/net/r6040.c
+++ b/drivers/net/r6040.c
@@ -45,6 +45,7 @@
#include <linux/io.h>
#include <linux/irq.h>
@ -10,7 +8,7 @@ Index: linux-2.6.32.12/drivers/net/r6040.c
#include <asm/processor.h>
@@ -180,7 +181,6 @@
@@ -180,7 +181,6 @@ struct r6040_descriptor {
struct r6040_private {
spinlock_t lock; /* driver lock */
@ -18,7 +16,7 @@ Index: linux-2.6.32.12/drivers/net/r6040.c
struct pci_dev *pdev;
struct r6040_descriptor *rx_insert_ptr;
struct r6040_descriptor *rx_remove_ptr;
@@ -190,13 +190,15 @@
@@ -190,13 +190,15 @@ struct r6040_private {
struct r6040_descriptor *tx_ring;
dma_addr_t rx_ring_dma;
dma_addr_t tx_ring_dma;
@ -37,7 +35,7 @@ Index: linux-2.6.32.12/drivers/net/r6040.c
};
static char version[] __devinitdata = KERN_INFO DRV_NAME
@@ -239,20 +241,29 @@
@@ -239,20 +241,29 @@ static void r6040_phy_write(void __iomem
}
}
@ -71,7 +69,7 @@ Index: linux-2.6.32.12/drivers/net/r6040.c
}
static void r6040_free_txbufs(struct net_device *dev)
@@ -409,10 +420,9 @@
@@ -409,10 +420,9 @@ static void r6040_tx_timeout(struct net_
void __iomem *ioaddr = priv->base;
printk(KERN_WARNING "%s: transmit timed out, int enable %4.4x "
@ -84,7 +82,7 @@ Index: linux-2.6.32.12/drivers/net/r6040.c
dev->stats.tx_errors++;
@@ -464,9 +474,6 @@
@@ -464,9 +474,6 @@ static int r6040_close(struct net_device
struct r6040_private *lp = netdev_priv(dev);
struct pci_dev *pdev = lp->pdev;
@ -94,7 +92,7 @@ Index: linux-2.6.32.12/drivers/net/r6040.c
spin_lock_irq(&lp->lock);
napi_disable(&lp->napi);
netif_stop_queue(dev);
@@ -496,64 +503,14 @@
@@ -496,64 +503,14 @@ static int r6040_close(struct net_device
return 0;
}
@ -162,7 +160,7 @@ Index: linux-2.6.32.12/drivers/net/r6040.c
}
static int r6040_rx(struct net_device *dev, int limit)
@@ -752,26 +709,6 @@
@@ -752,26 +709,6 @@ static int r6040_up(struct net_device *d
if (ret)
return ret;
@ -189,7 +187,7 @@ Index: linux-2.6.32.12/drivers/net/r6040.c
/* improve performance (by RDC guys) */
r6040_phy_write(ioaddr, 30, 17, (r6040_phy_read(ioaddr, 30, 17) | 0x4000));
r6040_phy_write(ioaddr, 30, 17, ~((~r6040_phy_read(ioaddr, 30, 17)) | 0x2000));
@@ -784,35 +721,6 @@
@@ -784,35 +721,6 @@ static int r6040_up(struct net_device *d
return 0;
}
@ -225,7 +223,7 @@ Index: linux-2.6.32.12/drivers/net/r6040.c
/* Read/set MAC address routines */
static void r6040_mac_address(struct net_device *dev)
@@ -874,10 +782,6 @@
@@ -874,10 +782,6 @@ static int r6040_open(struct net_device
napi_enable(&lp->napi);
netif_start_queue(dev);
@ -236,7 +234,7 @@ Index: linux-2.6.32.12/drivers/net/r6040.c
return 0;
}
@@ -1020,40 +924,22 @@
@@ -1020,40 +924,22 @@ static void netdev_get_drvinfo(struct ne
static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct r6040_private *rp = netdev_priv(dev);
@ -280,7 +278,7 @@ Index: linux-2.6.32.12/drivers/net/r6040.c
};
static const struct net_device_ops r6040_netdev_ops = {
@@ -1072,6 +958,86 @@
@@ -1072,6 +958,86 @@ static const struct net_device_ops r6040
#endif
};
@ -367,7 +365,7 @@ Index: linux-2.6.32.12/drivers/net/r6040.c
static int __devinit r6040_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
@@ -1082,6 +1048,7 @@
@@ -1082,6 +1048,7 @@ static int __devinit r6040_init_one(stru
static int card_idx = -1;
int bar = 0;
u16 *adrp;
@ -375,7 +373,7 @@ Index: linux-2.6.32.12/drivers/net/r6040.c
printk("%s\n", version);
@@ -1169,7 +1136,6 @@
@@ -1169,7 +1136,6 @@ static int __devinit r6040_init_one(stru
/* Init RDC private data */
lp->mcr0 = 0x1002;
lp->phy_addr = phy_table[card_idx];
@ -383,7 +381,7 @@ Index: linux-2.6.32.12/drivers/net/r6040.c
/* The RDC-specific entries in the device structure. */
dev->netdev_ops = &r6040_netdev_ops;
@@ -1177,28 +1143,61 @@
@@ -1177,28 +1143,61 @@ static int __devinit r6040_init_one(stru
dev->watchdog_timeo = TX_TIMEOUT;
netif_napi_add(dev, &lp->napi, r6040_poll, 64);
@ -453,7 +451,7 @@ Index: linux-2.6.32.12/drivers/net/r6040.c
err_out_unmap:
pci_iounmap(pdev, ioaddr);
err_out_free_res:
@@ -1212,8 +1211,12 @@
@@ -1212,8 +1211,12 @@ err_out:
static void __devexit r6040_remove_one(struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);

View File

@ -10,7 +10,6 @@
# drivers-y are linked after core-y
drivers-$(CONFIG_MATH_EMULATION) += arch/x86/math-emu/
drivers-$(CONFIG_PCI) += arch/x86/pci/
--- /dev/null
+++ b/arch/x86/mach-rdc321x/Makefile
@@ -0,0 +1,5 @@

View File

@ -1,5 +1,5 @@
--- a/arch/x86/kernel/mfgpt_32.c 2010-03-15 09:52:04.000000000 -0600
+++ b/arch/x86/kernel/mfgpt_32.c 2010-04-08 17:31:56.000000000 -0600
--- a/arch/x86/kernel/mfgpt_32.c
+++ b/arch/x86/kernel/mfgpt_32.c
@@ -33,7 +33,7 @@
#include <linux/module.h>
#include <asm/geode.h>