diff --git a/target/linux/brcm47xx/patches-3.3/020-bcma-move-parallel-flash-into-a-union.patch b/target/linux/brcm47xx/patches-3.3/020-bcma-move-parallel-flash-into-a-union.patch index 286508d543..98c855fbd8 100644 --- a/target/linux/brcm47xx/patches-3.3/020-bcma-move-parallel-flash-into-a-union.patch +++ b/target/linux/brcm47xx/patches-3.3/020-bcma-move-parallel-flash-into-a-union.patch @@ -15,14 +15,14 @@ @@ -189,6 +189,7 @@ static void bcma_core_mips_flash_detect( break; case BCMA_CC_FLASHT_PARA: - pr_info("found parallel flash.\n"); + bcma_info(bus, "found parallel flash.\n"); + bus->drv_cc.flash_type = BCMA_PFLASH; bus->drv_cc.pflash.window = 0x1c000000; bus->drv_cc.pflash.window_size = 0x02000000; --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h -@@ -117,10 +117,68 @@ +@@ -122,10 +122,68 @@ #define BCMA_CC_JCTL_EXT_EN 2 /* Enable external targets */ #define BCMA_CC_JCTL_EN 1 /* Enable Jtag master */ #define BCMA_CC_FLASHCTL 0x0040 @@ -91,7 +91,7 @@ #define BCMA_CC_BCAST_ADDR 0x0050 #define BCMA_CC_BCAST_DATA 0x0054 #define BCMA_CC_GPIOPULLUP 0x0058 /* Rev >= 20 only */ -@@ -346,6 +404,12 @@ +@@ -360,6 +418,12 @@ /* 4313 Chip specific ChipControl register bits */ #define BCMA_CCTRL_4313_12MA_LED_DRIVE 0x00000007 /* 12 mA drive strengh for later 4313 */ @@ -104,7 +104,7 @@ /* Data for the PMU, if available. * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU) */ -@@ -355,6 +419,10 @@ struct bcma_chipcommon_pmu { +@@ -369,6 +433,10 @@ struct bcma_chipcommon_pmu { }; #ifdef CONFIG_BCMA_DRIVER_MIPS @@ -115,7 +115,7 @@ struct bcma_pflash { u8 buswidth; u32 window; -@@ -380,7 +448,10 @@ struct bcma_drv_cc { +@@ -394,7 +462,10 @@ struct bcma_drv_cc { u16 fast_pwrup_delay; struct bcma_chipcommon_pmu pmu; #ifdef CONFIG_BCMA_DRIVER_MIPS diff --git a/target/linux/brcm47xx/patches-3.3/021-bcma-add-serial-flash-support-to-bcma.patch b/target/linux/brcm47xx/patches-3.3/021-bcma-add-serial-flash-support-to-bcma.patch index a4c9f4336a..7382636b3d 100644 --- a/target/linux/brcm47xx/patches-3.3/021-bcma-add-serial-flash-support-to-bcma.patch +++ b/target/linux/brcm47xx/patches-3.3/021-bcma-add-serial-flash-support-to-bcma.patch @@ -23,7 +23,7 @@ bcma-$(CONFIG_BCMA_DRIVER_MIPS) += driver_mips.o --- a/drivers/bcma/bcma_private.h +++ b/drivers/bcma/bcma_private.h -@@ -42,6 +42,11 @@ void bcma_chipco_serial_init(struct bcma +@@ -51,6 +51,11 @@ void bcma_chipco_serial_init(struct bcma u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc); u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc); @@ -392,7 +392,7 @@ + } while (ret == -EAGAIN && tries > 0); + + if (ret == -EAGAIN && tries == 0) { -+ pr_info("ST Flash rejected write\n"); ++ bcma_info(cc->core->bus, "ST Flash rejected write\n"); + ret = -EIO; + } + break; @@ -442,20 +442,20 @@ switch (bus->drv_cc.capabilities & BCMA_CC_CAP_FLASHT) { case BCMA_CC_FLASHT_STSER: case BCMA_CC_FLASHT_ATSER: -- pr_err("Serial flash not supported.\n"); +- bcma_err(bus, "Serial flash not supported.\n"); +#ifdef CONFIG_BCMA_SFLASH -+ pr_info("found serial flash.\n"); ++ bcma_info(bus, "found serial flash.\n"); + bus->drv_cc.flash_type = BCMA_SFLASH; + bcma_sflash_init(&bus->drv_cc); +#else -+ pr_info("serial flash not supported.\n"); ++ bcma_info(bus, "serial flash not supported.\n"); +#endif /* CONFIG_BCMA_SFLASH */ break; case BCMA_CC_FLASHT_PARA: - pr_info("found parallel flash.\n"); + bcma_info(bus, "found parallel flash.\n"); --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h -@@ -421,6 +421,7 @@ struct bcma_chipcommon_pmu { +@@ -435,6 +435,7 @@ struct bcma_chipcommon_pmu { #ifdef CONFIG_BCMA_DRIVER_MIPS enum bcma_flash_type { BCMA_PFLASH, @@ -463,7 +463,7 @@ }; struct bcma_pflash { -@@ -429,6 +430,14 @@ struct bcma_pflash { +@@ -443,6 +444,14 @@ struct bcma_pflash { u32 window_size; }; @@ -478,7 +478,7 @@ struct bcma_serial_port { void *regs; unsigned long clockspeed; -@@ -451,6 +460,9 @@ struct bcma_drv_cc { +@@ -465,6 +474,9 @@ struct bcma_drv_cc { enum bcma_flash_type flash_type; union { struct bcma_pflash pflash; @@ -488,7 +488,7 @@ }; int nr_serial_ports; -@@ -506,4 +518,14 @@ extern void bcma_chipco_regctl_maskset(s +@@ -520,4 +532,14 @@ extern void bcma_chipco_regctl_maskset(s u32 offset, u32 mask, u32 set); extern void bcma_pmu_spuravoid_pllupdate(struct bcma_drv_cc *cc, int spuravoid); diff --git a/target/linux/brcm47xx/patches-3.3/030-bcm47xx-bcma-nandflash.patch b/target/linux/brcm47xx/patches-3.3/030-bcm47xx-bcma-nandflash.patch index ed3392b88e..8f84bd2aba 100644 --- a/target/linux/brcm47xx/patches-3.3/030-bcm47xx-bcma-nandflash.patch +++ b/target/linux/brcm47xx/patches-3.3/030-bcm47xx-bcma-nandflash.patch @@ -239,7 +239,7 @@ bcma-$(CONFIG_BCMA_DRIVER_MIPS) += driver_mips.o --- a/drivers/bcma/bcma_private.h +++ b/drivers/bcma/bcma_private.h -@@ -47,6 +47,11 @@ u32 bcma_pmu_get_clockcpu(struct bcma_dr +@@ -56,6 +56,11 @@ u32 bcma_pmu_get_clockcpu(struct bcma_dr int bcma_sflash_init(struct bcma_drv_cc *cc); #endif /* CONFIG_BCMA_SFLASH */ @@ -971,7 +971,7 @@ +MODULE_DESCRIPTION("BCM47XX NAND flash driver"); --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h -@@ -422,6 +422,7 @@ struct bcma_chipcommon_pmu { +@@ -436,6 +436,7 @@ struct bcma_chipcommon_pmu { enum bcma_flash_type { BCMA_PFLASH, BCMA_SFLASH, @@ -979,7 +979,7 @@ }; struct bcma_pflash { -@@ -438,6 +439,14 @@ struct bcma_sflash { +@@ -452,6 +453,14 @@ struct bcma_sflash { }; #endif /* CONFIG_BCMA_SFLASH */ @@ -994,7 +994,7 @@ struct bcma_serial_port { void *regs; unsigned long clockspeed; -@@ -463,6 +472,9 @@ struct bcma_drv_cc { +@@ -477,6 +486,9 @@ struct bcma_drv_cc { #ifdef CONFIG_BCMA_SFLASH struct bcma_sflash sflash; #endif /* CONFIG_BCMA_SFLASH */ @@ -1004,7 +1004,7 @@ }; int nr_serial_ports; -@@ -528,4 +540,13 @@ int bcma_sflash_write(struct bcma_drv_cc +@@ -542,4 +554,13 @@ int bcma_sflash_write(struct bcma_drv_cc int bcma_sflash_erase(struct bcma_drv_cc *cc, u32 offset); #endif /* CONFIG_BCMA_SFLASH */ diff --git a/target/linux/generic/patches-3.3/025-bcma_backport.patch b/target/linux/generic/patches-3.3/025-bcma_backport.patch index d2592782a4..2f85e022c7 100644 --- a/target/linux/generic/patches-3.3/025-bcma_backport.patch +++ b/target/linux/generic/patches-3.3/025-bcma_backport.patch @@ -11,7 +11,19 @@ --- a/drivers/bcma/bcma_private.h +++ b/drivers/bcma/bcma_private.h -@@ -13,7 +13,7 @@ +@@ -10,10 +10,19 @@ + + #define BCMA_CORE_SIZE 0x1000 + ++#define bcma_err(bus, fmt, ...) \ ++ pr_err("bus%d: " fmt, (bus)->num, ##__VA_ARGS__) ++#define bcma_warn(bus, fmt, ...) \ ++ pr_warn("bus%d: " fmt, (bus)->num, ##__VA_ARGS__) ++#define bcma_info(bus, fmt, ...) \ ++ pr_info("bus%d: " fmt, (bus)->num, ##__VA_ARGS__) ++#define bcma_debug(bus, fmt, ...) \ ++ pr_debug("bus%d: " fmt, (bus)->num, ##__VA_ARGS__) ++ struct bcma_bus; /* main.c */ @@ -20,7 +32,7 @@ void bcma_bus_unregister(struct bcma_bus *bus); int __init bcma_bus_early_register(struct bcma_bus *bus, struct bcma_device *core_cc, -@@ -48,8 +48,12 @@ extern int __init bcma_host_pci_init(voi +@@ -48,8 +57,12 @@ extern int __init bcma_host_pci_init(voi extern void __exit bcma_host_pci_exit(void); #endif /* CONFIG_BCMA_HOST_PCI */ @@ -44,8 +56,12 @@ udelay(1); } EXPORT_SYMBOL_GPL(bcma_core_disable); -@@ -77,7 +78,7 @@ void bcma_core_set_clockmode(struct bcma - pr_err("HT force timeout\n"); +@@ -74,10 +75,10 @@ void bcma_core_set_clockmode(struct bcma + udelay(10); + } + if (i) +- pr_err("HT force timeout\n"); ++ bcma_err(core->bus, "HT force timeout\n"); break; case BCMA_CLKMODE_DYNAMIC: - pr_warn("Dynamic clockmode not supported yet!\n"); @@ -53,6 +69,50 @@ break; } } +@@ -101,9 +102,9 @@ void bcma_core_pll_ctl(struct bcma_devic + udelay(10); + } + if (i) +- pr_err("PLL enable timeout\n"); ++ bcma_err(core->bus, "PLL enable timeout\n"); + } else { +- pr_warn("Disabling PLL not supported yet!\n"); ++ bcma_warn(core->bus, "Disabling PLL not supported yet!\n"); + } + } + EXPORT_SYMBOL_GPL(bcma_core_pll_ctl); +@@ -119,8 +120,8 @@ u32 bcma_core_dma_translation(struct bcm + else + return BCMA_DMA_TRANSLATION_DMA32_CMT; + default: +- pr_err("DMA translation unknown for host %d\n", +- core->bus->hosttype); ++ bcma_err(core->bus, "DMA translation unknown for host %d\n", ++ core->bus->hosttype); + } + return BCMA_DMA_TRANSLATION_NONE; + } +--- a/drivers/bcma/driver_chipcommon.c ++++ b/drivers/bcma/driver_chipcommon.c +@@ -44,7 +44,7 @@ void bcma_core_chipcommon_init(struct bc + if (cc->capabilities & BCMA_CC_CAP_PMU) + bcma_pmu_init(cc); + if (cc->capabilities & BCMA_CC_CAP_PCTL) +- pr_err("Power control not implemented!\n"); ++ bcma_err(cc->core->bus, "Power control not implemented!\n"); + + if (cc->core->id.rev >= 16) { + if (cc->core->bus->sprom.leddc_on_time && +@@ -137,8 +137,7 @@ void bcma_chipco_serial_init(struct bcma + | BCMA_CC_CORECTL_UARTCLKEN); + } + } else { +- pr_err("serial not supported on this device ccrev: 0x%x\n", +- ccrev); ++ bcma_err(cc->core->bus, "serial not supported on this device ccrev: 0x%x\n", ccrev); + return; + } + --- a/drivers/bcma/driver_chipcommon_pmu.c +++ b/drivers/bcma/driver_chipcommon_pmu.c @@ -3,7 +3,8 @@ @@ -102,8 +162,8 @@ default: - pr_err("PMU resource config unknown for device 0x%04X\n", - bus->chipinfo.id); -+ pr_debug("PMU resource config unknown or not needed for device 0x%04X\n", -+ bus->chipinfo.id); ++ bcma_debug(bus, "PMU resource config unknown or not needed for device 0x%04X\n", ++ bus->chipinfo.id); } /* Set the resource masks. */ @@ -191,11 +251,22 @@ default: - pr_err("Workarounds unknown for device 0x%04X\n", - bus->chipinfo.id); -+ pr_debug("Workarounds unknown or not needed for device 0x%04X\n", -+ bus->chipinfo.id); ++ bcma_debug(bus, "Workarounds unknown or not needed for device 0x%04X\n", ++ bus->chipinfo.id); } } +@@ -164,8 +148,8 @@ void bcma_pmu_init(struct bcma_drv_cc *c + pmucap = bcma_cc_read32(cc, BCMA_CC_PMU_CAP); + cc->pmu.rev = (pmucap & BCMA_CC_PMU_CAP_REVISION); + +- pr_debug("Found rev %u PMU (capabilities 0x%08X)\n", cc->pmu.rev, +- pmucap); ++ bcma_debug(cc->core->bus, "Found rev %u PMU (capabilities 0x%08X)\n", ++ cc->pmu.rev, pmucap); + + if (cc->pmu.rev == 1) + bcma_cc_mask32(cc, BCMA_CC_PMU_CTL, @@ -174,12 +158,7 @@ void bcma_pmu_init(struct bcma_drv_cc *c bcma_cc_set32(cc, BCMA_CC_PMU_CTL, BCMA_CC_PMU_CTL_NOILPONW); @@ -209,7 +280,7 @@ bcma_pmu_workarounds(cc); } -@@ -188,17 +167,17 @@ u32 bcma_pmu_alp_clock(struct bcma_drv_c +@@ -188,23 +167,22 @@ u32 bcma_pmu_alp_clock(struct bcma_drv_c struct bcma_bus *bus = cc->core->bus; switch (bus->chipinfo.id) { @@ -236,7 +307,15 @@ /* always 25Mhz */ return 25000 * 1000; default: -@@ -221,7 +200,8 @@ static u32 bcma_pmu_clock(struct bcma_dr +- pr_warn("No ALP clock specified for %04X device, " +- "pmu rev. %d, using default %d Hz\n", +- bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_ALP_CLOCK); ++ bcma_warn(bus, "No ALP clock specified for %04X device, pmu rev. %d, using default %d Hz\n", ++ bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_ALP_CLOCK); + } + return BCMA_CC_PMU_ALP_CLOCK; + } +@@ -221,7 +199,8 @@ static u32 bcma_pmu_clock(struct bcma_dr BUG_ON(!m || m > 4); @@ -246,7 +325,43 @@ /* Detect failure in clock setting */ tmp = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT); if (tmp & 0x40000) -@@ -253,22 +233,22 @@ u32 bcma_pmu_get_clockcontrol(struct bcm +@@ -247,33 +226,62 @@ static u32 bcma_pmu_clock(struct bcma_dr + return (fc / div) * 1000000; + } + ++static u32 bcma_pmu_clock_bcm4706(struct bcma_drv_cc *cc, u32 pll0, u32 m) ++{ ++ u32 tmp, ndiv, p1div, p2div; ++ u32 clock; ++ ++ BUG_ON(!m || m > 4); ++ ++ /* Get N, P1 and P2 dividers to determine CPU clock */ ++ tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PMU6_4706_PROCPLL_OFF); ++ ndiv = (tmp & BCMA_CC_PMU6_4706_PROC_NDIV_INT_MASK) ++ >> BCMA_CC_PMU6_4706_PROC_NDIV_INT_SHIFT; ++ p1div = (tmp & BCMA_CC_PMU6_4706_PROC_P1DIV_MASK) ++ >> BCMA_CC_PMU6_4706_PROC_P1DIV_SHIFT; ++ p2div = (tmp & BCMA_CC_PMU6_4706_PROC_P2DIV_MASK) ++ >> BCMA_CC_PMU6_4706_PROC_P2DIV_SHIFT; ++ ++ tmp = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT); ++ if (tmp & BCMA_CC_CHIPST_4706_PKG_OPTION) ++ /* Low cost bonding: Fixed reference clock 25MHz and m = 4 */ ++ clock = (25000000 / 4) * ndiv * p2div / p1div; ++ else ++ /* Fixed reference clock 25MHz and m = 2 */ ++ clock = (25000000 / 2) * ndiv * p2div / p1div; ++ ++ if (m == BCMA_CC_PMU5_MAINPLL_SSB) ++ clock = clock / 4; ++ ++ return clock; ++} ++ + /* query bus clock frequency for PMU-enabled chipcommon */ + u32 bcma_pmu_get_clockcontrol(struct bcma_drv_cc *cc) + { struct bcma_bus *bus = cc->core->bus; switch (bus->chipinfo.id) { @@ -269,15 +384,24 @@ return bcma_pmu_clock(cc, BCMA_CC_PMU5357_MAINPLL_PLL0, BCMA_CC_PMU5_MAINPLL_SSB); - case 0x5300: -+ case BCMA_CHIP_ID_BCM4706: - return bcma_pmu_clock(cc, BCMA_CC_PMU4706_MAINPLL_PLL0, - BCMA_CC_PMU5_MAINPLL_SSB); +- return bcma_pmu_clock(cc, BCMA_CC_PMU4706_MAINPLL_PLL0, +- BCMA_CC_PMU5_MAINPLL_SSB); - case 53572: ++ case BCMA_CHIP_ID_BCM4706: ++ return bcma_pmu_clock_bcm4706(cc, BCMA_CC_PMU4706_MAINPLL_PLL0, ++ BCMA_CC_PMU5_MAINPLL_SSB); + case BCMA_CHIP_ID_BCM53572: return 75000000; default: - pr_warn("No backplane clock specified for %04X device, " -@@ -283,17 +263,17 @@ u32 bcma_pmu_get_clockcpu(struct bcma_dr +- pr_warn("No backplane clock specified for %04X device, " +- "pmu rev. %d, using default %d Hz\n", +- bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_HT_CLOCK); ++ bcma_warn(bus, "No backplane clock specified for %04X device, pmu rev. %d, using default %d Hz\n", ++ bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_HT_CLOCK); + } + return BCMA_CC_PMU_HT_CLOCK; + } +@@ -283,17 +291,21 @@ u32 bcma_pmu_get_clockcpu(struct bcma_dr { struct bcma_bus *bus = cc->core->bus; @@ -289,6 +413,10 @@ u32 pll; switch (bus->chipinfo.id) { - case 0x5356: ++ case BCMA_CHIP_ID_BCM4706: ++ return bcma_pmu_clock_bcm4706(cc, ++ BCMA_CC_PMU4706_MAINPLL_PLL0, ++ BCMA_CC_PMU5_MAINPLL_CPU); + case BCMA_CHIP_ID_BCM5356: pll = BCMA_CC_PMU5356_MAINPLL_PLL0; break; @@ -299,13 +427,12 @@ pll = BCMA_CC_PMU5357_MAINPLL_PLL0; break; default: -@@ -301,10 +281,190 @@ u32 bcma_pmu_get_clockcpu(struct bcma_dr +@@ -301,10 +313,188 @@ u32 bcma_pmu_get_clockcpu(struct bcma_dr break; } - /* TODO: if (bus->chipinfo.id == 0x5300) -+ /* TODO: if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4706) - return si_4706_pmu_clock(sih, osh, cc, PMU4706_MAINPLL_PLL0, PMU5_MAINPLL_CPU); */ +- return si_4706_pmu_clock(sih, osh, cc, PMU4706_MAINPLL_PLL0, PMU5_MAINPLL_CPU); */ return bcma_pmu_clock(cc, pll, BCMA_CC_PMU5_MAINPLL_CPU); } @@ -482,8 +609,8 @@ + tmp = 1 << 10; + break; + default: -+ pr_err("unknown spuravoidance settings for chip 0x%04X, not changing PLL\n", -+ bus->chipinfo.id); ++ bcma_err(bus, "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n", ++ bus->chipinfo.id); + break; + } + @@ -513,6 +640,66 @@ dev->bus->chipinfo.pkg == 11 && dev->id.id == BCMA_CORE_USB20_HOST; } +@@ -143,8 +143,8 @@ static void bcma_core_mips_set_irq(struc + 1 << irqflag); + } + +- pr_info("set_irq: core 0x%04x, irq %d => %d\n", +- dev->id.id, oldirq + 2, irq + 2); ++ bcma_info(bus, "set_irq: core 0x%04x, irq %d => %d\n", ++ dev->id.id, oldirq + 2, irq + 2); + } + + static void bcma_core_mips_print_irq(struct bcma_device *dev, unsigned int irq) +@@ -173,7 +173,7 @@ u32 bcma_cpu_clock(struct bcma_drv_mips + if (bus->drv_cc.capabilities & BCMA_CC_CAP_PMU) + return bcma_pmu_get_clockcpu(&bus->drv_cc); + +- pr_err("No PMU available, need this to get the cpu clock\n"); ++ bcma_err(bus, "No PMU available, need this to get the cpu clock\n"); + return 0; + } + EXPORT_SYMBOL(bcma_cpu_clock); +@@ -185,10 +185,10 @@ static void bcma_core_mips_flash_detect( + switch (bus->drv_cc.capabilities & BCMA_CC_CAP_FLASHT) { + case BCMA_CC_FLASHT_STSER: + case BCMA_CC_FLASHT_ATSER: +- pr_err("Serial flash not supported.\n"); ++ bcma_err(bus, "Serial flash not supported.\n"); + break; + case BCMA_CC_FLASHT_PARA: +- pr_info("found parallel flash.\n"); ++ bcma_info(bus, "found parallel flash.\n"); + bus->drv_cc.pflash.window = 0x1c000000; + bus->drv_cc.pflash.window_size = 0x02000000; + +@@ -199,7 +199,7 @@ static void bcma_core_mips_flash_detect( + bus->drv_cc.pflash.buswidth = 2; + break; + default: +- pr_err("flash not supported.\n"); ++ bcma_err(bus, "flash not supported.\n"); + } + } + +@@ -209,7 +209,7 @@ void bcma_core_mips_init(struct bcma_drv + struct bcma_device *core; + bus = mcore->core->bus; + +- pr_info("Initializing MIPS core...\n"); ++ bcma_info(bus, "Initializing MIPS core...\n"); + + if (!mcore->setup_done) + mcore->assigned_irqs = 1; +@@ -244,7 +244,7 @@ void bcma_core_mips_init(struct bcma_drv + break; + } + } +- pr_info("IRQ reconfiguration done\n"); ++ bcma_info(bus, "IRQ reconfiguration done\n"); + bcma_core_mips_dump_irq(bus); + + if (mcore->setup_done) --- a/drivers/bcma/driver_pci.c +++ b/drivers/bcma/driver_pci.c @@ -2,8 +2,9 @@ @@ -873,7 +1060,7 @@ +EXPORT_SYMBOL_GPL(bcma_core_pci_extend_L1timer); --- a/drivers/bcma/driver_pci_host.c +++ b/drivers/bcma/driver_pci_host.c -@@ -2,13 +2,590 @@ +@@ -2,13 +2,592 @@ * Broadcom specific AMBA * PCI Core in hostmode * @@ -911,7 +1098,7 @@ + return false; + + if (bus->sprom.boardflags_lo & BCMA_CORE_PCI_BFL_NOPCI) { -+ pr_info("This PCI core is disabled and not working\n"); ++ bcma_info(bus, "This PCI core is disabled and not working\n"); + return false; + } + @@ -1218,6 +1405,7 @@ + */ +static void __devinit bcma_core_pci_enable_crs(struct bcma_drv_pci *pc) +{ ++ struct bcma_bus *bus = pc->core->bus; + u8 cap_ptr, root_ctrl, root_cap, dev; + u16 val16; + int i; @@ -1256,7 +1444,8 @@ + udelay(10); + } + if (val16 == 0x1) -+ pr_err("PCI: Broken device in slot %d\n", dev); ++ bcma_err(bus, "PCI: Broken device in slot %d\n", ++ dev); + } + } +} @@ -1269,11 +1458,11 @@ + u32 pci_membase_1G; + unsigned long io_map_base; + -+ pr_info("PCIEcore in host mode found\n"); ++ bcma_info(bus, "PCIEcore in host mode found\n"); + + pc_host = kzalloc(sizeof(*pc_host), GFP_KERNEL); + if (!pc_host) { -+ pr_err("can not allocate memory"); ++ bcma_err(bus, "can not allocate memory"); + return; + } + @@ -1468,6 +1657,15 @@ +EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq); --- a/drivers/bcma/host_pci.c +++ b/drivers/bcma/host_pci.c +@@ -18,7 +18,7 @@ static void bcma_host_pci_switch_core(st + pci_write_config_dword(core->bus->host_pci, BCMA_PCI_BAR0_WIN2, + core->wrap); + core->bus->mapped_core = core; +- pr_debug("Switched to core: 0x%X\n", core->id.id); ++ bcma_debug(core->bus, "Switched to core: 0x%X\n", core->id.id); + } + + /* Provides access to the requested core. Returns base offset that has to be @@ -154,8 +154,8 @@ const struct bcma_host_ops bcma_host_pci .awrite32 = bcma_host_pci_awrite32, }; @@ -1479,6 +1677,15 @@ { struct bcma_bus *bus; int err = -ENOMEM; +@@ -188,7 +188,7 @@ static int bcma_host_pci_probe(struct pc + + /* SSB needed additional powering up, do we have any AMBA PCI cards? */ + if (!pci_is_pcie(dev)) +- pr_err("PCI card detected, report problems.\n"); ++ bcma_err(bus, "PCI card detected, report problems.\n"); + + /* Map MMIO */ + err = -ENOMEM; @@ -201,6 +201,9 @@ static int bcma_host_pci_probe(struct pc bus->hosttype = BCMA_HOSTTYPE_PCI; bus->ops = &bcma_host_pci_ops; @@ -1556,7 +1763,19 @@ switch (bus->hosttype) { case BCMA_HOSTTYPE_PCI: -@@ -132,11 +139,15 @@ static void bcma_unregister_cores(struct +@@ -111,8 +118,9 @@ static int bcma_register_cores(struct bc + + err = device_register(&core->dev); + if (err) { +- pr_err("Could not register dev for core 0x%03X\n", +- core->id.id); ++ bcma_err(bus, ++ "Could not register dev for core 0x%03X\n", ++ core->id.id); + continue; + } + core->dev_registered = true; +@@ -132,15 +140,19 @@ static void bcma_unregister_cores(struct } } @@ -1573,6 +1792,56 @@ /* Scan for devices (cores) */ err = bcma_bus_scan(bus); if (err) { +- pr_err("Failed to scan: %d\n", err); ++ bcma_err(bus, "Failed to scan: %d\n", err); + return -1; + } + +@@ -168,14 +180,14 @@ int bcma_bus_register(struct bcma_bus *b + /* Try to get SPROM */ + err = bcma_sprom_get(bus); + if (err == -ENOENT) { +- pr_err("No SPROM available\n"); ++ bcma_err(bus, "No SPROM available\n"); + } else if (err) +- pr_err("Failed to get SPROM: %d\n", err); ++ bcma_err(bus, "Failed to get SPROM: %d\n", err); + + /* Register found cores */ + bcma_register_cores(bus); + +- pr_info("Bus registered\n"); ++ bcma_info(bus, "Bus registered\n"); + + return 0; + } +@@ -203,7 +215,7 @@ int __init bcma_bus_early_register(struc + /* Scan for chip common core */ + err = bcma_bus_scan_early(bus, &match, core_cc); + if (err) { +- pr_err("Failed to scan for common core: %d\n", err); ++ bcma_err(bus, "Failed to scan for common core: %d\n", err); + return -1; + } + +@@ -215,7 +227,7 @@ int __init bcma_bus_early_register(struc + /* Scan for mips core */ + err = bcma_bus_scan_early(bus, &match, core_mips); + if (err) { +- pr_err("Failed to scan for mips core: %d\n", err); ++ bcma_err(bus, "Failed to scan for mips core: %d\n", err); + return -1; + } + +@@ -233,7 +245,7 @@ int __init bcma_bus_early_register(struc + bcma_core_mips_init(&bus->drv_mips); + } + +- pr_info("Early bus registered\n"); ++ bcma_info(bus, "Early bus registered\n"); + + return 0; + } --- a/drivers/bcma/scan.c +++ b/drivers/bcma/scan.c @@ -19,15 +19,27 @@ struct bcma_device_id_name { @@ -1711,7 +1980,7 @@ + if (tmp <= 0) { + return -EILSEQ; + } else { -+ pr_info("Bridge found\n"); ++ bcma_info(bus, "Bridge found\n"); + return -ENXIO; + } + } @@ -1747,8 +2016,8 @@ + chipinfo->id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT; + chipinfo->rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT; + chipinfo->pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT; -+ pr_info("Found chip with id 0x%04X, rev 0x%02X and package 0x%02X\n", -+ chipinfo->id, chipinfo->rev, chipinfo->pkg); ++ bcma_info(bus, "Found chip with id 0x%04X, rev 0x%02X and package 0x%02X\n", ++ chipinfo->id, chipinfo->rev, chipinfo->pkg); + bus->init_done = true; } @@ -1761,15 +2030,41 @@ struct bcma_device *core = kzalloc(sizeof(*core), GFP_KERNEL); if (!core) return -ENOMEM; -@@ -414,6 +479,8 @@ int bcma_bus_scan(struct bcma_bus *bus) +@@ -414,12 +479,13 @@ int bcma_bus_scan(struct bcma_bus *bus) core->core_index = core_num++; bus->nr_cores++; + other_core = bcma_find_core_reverse(bus, core->id.id); + core->core_unit = (other_core == NULL) ? 0 : other_core->core_unit + 1; - pr_info("Core %d found: %s " - "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n", +- pr_info("Core %d found: %s " +- "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n", +- core->core_index, bcma_device_name(&core->id), +- core->id.manuf, core->id.id, core->id.rev, +- core->id.class); ++ bcma_info(bus, "Core %d found: %s (manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n", ++ core->core_index, bcma_device_name(&core->id), ++ core->id.manuf, core->id.id, core->id.rev, ++ core->id.class); + + list_add(&core->list, &bus->cores); + } +@@ -471,11 +537,10 @@ int __init bcma_bus_scan_early(struct bc + + core->core_index = core_num++; + bus->nr_cores++; +- pr_info("Core %d found: %s " +- "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n", +- core->core_index, bcma_device_name(&core->id), +- core->id.manuf, core->id.id, core->id.rev, +- core->id.class); ++ bcma_info(bus, "Core %d found: %s (manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n", ++ core->core_index, bcma_device_name(&core->id), ++ core->id.manuf, core->id.id, core->id.rev, ++ core->id.class); + + list_add(&core->list, &bus->cores); + err = 0; --- a/drivers/bcma/sprom.c +++ b/drivers/bcma/sprom.c @@ -2,6 +2,8 @@ @@ -1830,11 +2125,11 @@ + if (err) + goto fail; + -+ pr_debug("Using SPROM revision %d provided by" -+ " platform.\n", bus->sprom.revision); ++ bcma_debug(bus, "Using SPROM revision %d provided by platform.\n", ++ bus->sprom.revision); + return 0; +fail: -+ pr_warn("Using fallback SPROM failed (err %d)\n", err); ++ bcma_warn(bus, "Using fallback SPROM failed (err %d)\n", err); + return err; +} @@ -2324,7 +2619,7 @@ - * TODO: understand this condition and use it */ - offset = (bus->chipinfo.id == 0x4331) ? BCMA_CC_SPROM : - BCMA_CC_SPROM_PCIE6; -+ pr_debug("SPROM offset 0x%x\n", offset); ++ bcma_debug(bus, "SPROM offset 0x%x\n", offset); bcma_sprom_read(bus, offset, sprom); - if (bus->chipinfo.id == 0x4331) @@ -2465,7 +2760,7 @@ #define BCMA_CC_IRQSTAT 0x0020 #define BCMA_CC_IRQMASK 0x0024 #define BCMA_CC_IRQ_GPIO 0x00000001 /* gpio intr */ -@@ -79,6 +84,10 @@ +@@ -79,6 +84,15 @@ #define BCMA_CC_IRQ_WDRESET 0x80000000 /* watchdog reset occurred */ #define BCMA_CC_CHIPCTL 0x0028 /* Rev >= 11 only */ #define BCMA_CC_CHIPSTAT 0x002C /* Rev >= 11 only */ @@ -2473,10 +2768,15 @@ +#define BCMA_CC_CHIPST_4313_OTP_PRESENT 2 +#define BCMA_CC_CHIPST_4331_SPROM_PRESENT 2 +#define BCMA_CC_CHIPST_4331_OTP_PRESENT 4 ++#define BCMA_CC_CHIPST_4706_PKG_OPTION BIT(0) /* 0: full-featured package 1: low-cost package */ ++#define BCMA_CC_CHIPST_4706_SFLASH_PRESENT BIT(1) /* 0: parallel, 1: serial flash is present */ ++#define BCMA_CC_CHIPST_4706_SFLASH_TYPE BIT(2) /* 0: 8b-p/ST-s flash, 1: 16b-p/Atmal-s flash */ ++#define BCMA_CC_CHIPST_4706_MIPS_BENDIAN BIT(3) /* 0: little, 1: big endian */ ++#define BCMA_CC_CHIPST_4706_PCIE1_DISABLE BIT(5) /* PCIE1 enable strap pin */ #define BCMA_CC_JCMD 0x0030 /* Rev >= 10 only */ #define BCMA_CC_JCMD_START 0x80000000 #define BCMA_CC_JCMD_BUSY 0x80000000 -@@ -181,6 +190,22 @@ +@@ -181,6 +195,22 @@ #define BCMA_CC_FLASH_CFG 0x0128 #define BCMA_CC_FLASH_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */ #define BCMA_CC_FLASH_WAITCNT 0x012C @@ -2499,7 +2799,7 @@ /* 0x1E0 is defined as shared BCMA_CLKCTLST */ #define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ #define BCMA_CC_UART0_DATA 0x0300 -@@ -240,7 +265,6 @@ +@@ -240,7 +270,6 @@ #define BCMA_CC_PLLCTL_ADDR 0x0660 #define BCMA_CC_PLLCTL_DATA 0x0664 #define BCMA_CC_SPROM 0x0800 /* SPROM beginning */ @@ -2507,7 +2807,23 @@ /* Divider allocation in 4716/47162/5356 */ #define BCMA_CC_PMU5_MAINPLL_CPU 1 -@@ -284,6 +308,19 @@ +@@ -256,6 +285,15 @@ + + /* 4706 PMU */ + #define BCMA_CC_PMU4706_MAINPLL_PLL0 0 ++#define BCMA_CC_PMU6_4706_PROCPLL_OFF 4 /* The CPU PLL */ ++#define BCMA_CC_PMU6_4706_PROC_P2DIV_MASK 0x000f0000 ++#define BCMA_CC_PMU6_4706_PROC_P2DIV_SHIFT 16 ++#define BCMA_CC_PMU6_4706_PROC_P1DIV_MASK 0x0000f000 ++#define BCMA_CC_PMU6_4706_PROC_P1DIV_SHIFT 12 ++#define BCMA_CC_PMU6_4706_PROC_NDIV_INT_MASK 0x00000ff8 ++#define BCMA_CC_PMU6_4706_PROC_NDIV_INT_SHIFT 3 ++#define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_MASK 0x00000007 ++#define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_SHIFT 0 + + /* ALP clock on pre-PMU chips */ + #define BCMA_CC_PMU_ALP_CLOCK 20000000 +@@ -284,6 +322,19 @@ #define BCMA_CC_PPL_PCHI_OFF 5 #define BCMA_CC_PPL_PCHI_MASK 0x0000003f @@ -2527,7 +2843,7 @@ /* BCM4331 ChipControl numbers. */ #define BCMA_CHIPCTL_4331_BT_COEXIST BIT(0) /* 0 disable */ #define BCMA_CHIPCTL_4331_SECI BIT(1) /* 0 SECI is disabled (JATG functional) */ -@@ -297,9 +334,18 @@ +@@ -297,9 +348,18 @@ #define BCMA_CHIPCTL_4331_OVR_PIPEAUXPWRDOWN BIT(9) /* override core control on pipe_AuxPowerDown */ #define BCMA_CHIPCTL_4331_PCIE_AUXCLKEN BIT(10) /* pcie_auxclkenable */ #define BCMA_CHIPCTL_4331_PCIE_PIPE_PLLDOWN BIT(11) /* pcie_pipe_pllpowerdown */ @@ -2546,7 +2862,7 @@ /* Data for the PMU, if available. * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU) */ -@@ -387,5 +433,6 @@ extern void bcma_chipco_chipctl_maskset( +@@ -387,5 +447,6 @@ extern void bcma_chipco_chipctl_maskset( u32 offset, u32 mask, u32 set); extern void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask, u32 set);