linux/generic: add MIB counters and port status to ADM6996 switch
This patch adds port status information and MIB counters to the ADM6996 switch driver. The driver supports also the older ADM6996L-variant, but I'm not able to test this patch on that chip. According to the datasheet the same registers exist there as well, so I think it should work, but any feedback is appreciated. Signed-off-by: Matti Laakso <malaakso at elisanet.fi> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40542 3c298f89-4303-0410-b956-a3cf2f4a3e73master
John Crispin
parent
3e12489885
commit
4fb275842c
|
|
@ -6,6 +6,7 @@
|
|||
* Copyright (c) 2008 Felix Fietkau <nbd@openwrt.org>
|
||||
* VLAN support Copyright (c) 2010, 2011 Peter Lebbing <peter@digitalbrains.com>
|
||||
* Copyright (c) 2013 Hauke Mehrtens <hauke@hauke-m.de>
|
||||
* Copyright (c) 2014 Matti Laakso <malaakso@elisanet.fi>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License v2 as published by the
|
||||
|
|
@ -54,6 +55,11 @@ static const char * const adm6996_model_name[] =
|
|||
"ADM6996L"
|
||||
};
|
||||
|
||||
struct adm6996_mib_desc {
|
||||
unsigned int offset;
|
||||
const char *name;
|
||||
};
|
||||
|
||||
struct adm6996_priv {
|
||||
struct switch_dev dev;
|
||||
void *priv;
|
||||
|
|
@ -79,6 +85,9 @@ struct adm6996_priv {
|
|||
u8 vlan_table[ADM_NUM_VLANS]; /* bitmap, 1 = port is member */
|
||||
u8 vlan_tagged[ADM_NUM_VLANS]; /* bitmap, 1 = tagged member */
|
||||
|
||||
struct mutex mib_lock;
|
||||
char buf[2048];
|
||||
|
||||
struct mutex reg_mutex;
|
||||
|
||||
/* use abstraction for regops, we want to add gpio support in the future */
|
||||
|
|
@ -89,6 +98,21 @@ struct adm6996_priv {
|
|||
#define to_adm(_dev) container_of(_dev, struct adm6996_priv, dev)
|
||||
#define phy_to_adm(_phy) ((struct adm6996_priv *) (_phy)->priv)
|
||||
|
||||
#define MIB_DESC(_o, _n) \
|
||||
{ \
|
||||
.offset = (_o), \
|
||||
.name = (_n), \
|
||||
}
|
||||
|
||||
static const struct adm6996_mib_desc adm6996_mibs[] = {
|
||||
MIB_DESC(ADM_CL0, "RxPacket"),
|
||||
MIB_DESC(ADM_CL6, "RxByte"),
|
||||
MIB_DESC(ADM_CL12, "TxPacket"),
|
||||
MIB_DESC(ADM_CL18, "TxByte"),
|
||||
MIB_DESC(ADM_CL24, "Collision"),
|
||||
MIB_DESC(ADM_CL30, "Error"),
|
||||
};
|
||||
|
||||
static inline u16
|
||||
r16(struct adm6996_priv *priv, enum admreg reg)
|
||||
{
|
||||
|
|
@ -773,6 +797,99 @@ adm6996_reset_switch(struct switch_dev *dev)
|
|||
return 0;
|
||||
}
|
||||
|
||||
static int
|
||||
adm6996_get_port_link(struct switch_dev *dev, int port,
|
||||
struct switch_port_link *link)
|
||||
{
|
||||
struct adm6996_priv *priv = to_adm(dev);
|
||||
|
||||
u16 reg = 0;
|
||||
u32 speed;
|
||||
|
||||
if (port >= ADM_NUM_PORTS)
|
||||
return -EINVAL;
|
||||
|
||||
switch (port) {
|
||||
case 0:
|
||||
reg = r16(priv, ADM_PS0);
|
||||
break;
|
||||
case 1:
|
||||
reg = r16(priv, ADM_PS0);
|
||||
reg = reg >> 8;
|
||||
break;
|
||||
case 2:
|
||||
reg = r16(priv, ADM_PS1);
|
||||
break;
|
||||
case 3:
|
||||
reg = r16(priv, ADM_PS1);
|
||||
reg = reg >> 8;
|
||||
break;
|
||||
case 4:
|
||||
reg = r16(priv, ADM_PS1);
|
||||
reg = reg >> 12;
|
||||
break;
|
||||
case 5:
|
||||
reg = r16(priv, ADM_PS2);
|
||||
/* Bits 0, 1, 3 and 4. */
|
||||
reg = (reg & 3) | ((reg & 24) >> 1);
|
||||
break;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
link->link = reg & ADM_PS_LS;
|
||||
if (!link->link)
|
||||
return 0;
|
||||
link->aneg = true;
|
||||
link->duplex = reg & ADM_PS_DS;
|
||||
link->tx_flow = reg & ADM_PS_FCS;
|
||||
link->rx_flow = reg & ADM_PS_FCS;
|
||||
if (reg & ADM_PS_SS)
|
||||
link->speed = SWITCH_PORT_SPEED_100;
|
||||
else
|
||||
link->speed = SWITCH_PORT_SPEED_10;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int
|
||||
adm6996_sw_get_port_mib(struct switch_dev *dev,
|
||||
const struct switch_attr *attr,
|
||||
struct switch_val *val)
|
||||
{
|
||||
struct adm6996_priv *priv = to_adm(dev);
|
||||
int port;
|
||||
char *buf = priv->buf;
|
||||
int i, len = 0;
|
||||
u32 reg = 0;
|
||||
|
||||
port = val->port_vlan;
|
||||
if (port >= ADM_NUM_PORTS)
|
||||
return -EINVAL;
|
||||
|
||||
mutex_lock(&priv->mib_lock);
|
||||
|
||||
len += snprintf(buf + len, sizeof(priv->buf) - len,
|
||||
"Port %d MIB counters\n",
|
||||
port);
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(adm6996_mibs); i++) {
|
||||
reg = r16(priv, adm6996_mibs[i].offset + ADM_OFFSET_PORT(port));
|
||||
reg += r16(priv, adm6996_mibs[i].offset + ADM_OFFSET_PORT(port) + 1) << 16;
|
||||
len += snprintf(buf + len, sizeof(priv->buf) - len,
|
||||
"%-12s: %lu\n",
|
||||
adm6996_mibs[i].name,
|
||||
reg);
|
||||
}
|
||||
|
||||
mutex_unlock(&priv->mib_lock);
|
||||
|
||||
val->value.s = buf;
|
||||
val->len = len;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct switch_attr adm6996_globals[] = {
|
||||
{
|
||||
.type = SWITCH_TYPE_INT,
|
||||
|
|
@ -802,6 +919,13 @@ static struct switch_attr adm6996_globals[] = {
|
|||
};
|
||||
|
||||
static struct switch_attr adm6996_port[] = {
|
||||
{
|
||||
.type = SWITCH_TYPE_STRING,
|
||||
.name = "mib",
|
||||
.description = "Get port's MIB counters",
|
||||
.set = NULL,
|
||||
.get = adm6996_sw_get_port_mib,
|
||||
},
|
||||
};
|
||||
|
||||
static struct switch_attr adm6996_vlan[] = {
|
||||
|
|
@ -833,6 +957,7 @@ static const struct switch_dev_ops adm6996_ops = {
|
|||
.set_vlan_ports = adm6996_set_ports,
|
||||
.apply_config = adm6996_hw_apply,
|
||||
.reset_switch = adm6996_reset_switch,
|
||||
.get_port_link = adm6996_get_port_link,
|
||||
};
|
||||
|
||||
static int adm6996_switch_init(struct adm6996_priv *priv, const char *alias, struct net_device *netdev)
|
||||
|
|
@ -899,6 +1024,7 @@ static int adm6996_config_init(struct phy_device *pdev)
|
|||
return -ENOMEM;
|
||||
|
||||
mutex_init(&priv->reg_mutex);
|
||||
mutex_init(&priv->mib_lock);
|
||||
priv->priv = pdev;
|
||||
priv->read = adm6996_read_mii_reg;
|
||||
priv->write = adm6996_write_mii_reg;
|
||||
|
|
|
|||
|
|
@ -50,6 +50,16 @@ enum admreg {
|
|||
ADM_COUNTER_BASE = 0xa0,
|
||||
ADM_SIG0 = ADM_COUNTER_BASE + 0,
|
||||
ADM_SIG1 = ADM_COUNTER_BASE + 1,
|
||||
ADM_PS0 = ADM_COUNTER_BASE + 2,
|
||||
ADM_PS1 = ADM_COUNTER_BASE + 3,
|
||||
ADM_PS2 = ADM_COUNTER_BASE + 4,
|
||||
ADM_CL0 = ADM_COUNTER_BASE + 8, /* RxPacket */
|
||||
ADM_CL6 = ADM_COUNTER_BASE + 0x1a, /* RxByte */
|
||||
ADM_CL12 = ADM_COUNTER_BASE + 0x2c, /* TxPacket */
|
||||
ADM_CL18 = ADM_COUNTER_BASE + 0x3e, /* TxByte */
|
||||
ADM_CL24 = ADM_COUNTER_BASE + 0x50, /* Coll */
|
||||
ADM_CL30 = ADM_COUNTER_BASE + 0x62, /* Err */
|
||||
#define ADM_OFFSET_PORT(n) ((n * 4) - (n / 4) * 2 - (n / 5) * 2)
|
||||
ADM_PHY_BASE = 0x200,
|
||||
#define ADM_PHY_PORT(n) (ADM_PHY_BASE + (0x20 * n))
|
||||
};
|
||||
|
|
@ -159,6 +169,14 @@ static const u8 adm_portcfg[] = {
|
|||
((ports & 0x04) << 2) | ((ports & 0x08) << 3) | \
|
||||
((ports & 0x10) << 3) | ((ports & 0x20) << 3))
|
||||
|
||||
/* Port status register */
|
||||
enum {
|
||||
ADM_PS_LS = (1 << 0), /* Link status */
|
||||
ADM_PS_SS = (1 << 1), /* Speed status */
|
||||
ADM_PS_DS = (1 << 2), /* Duplex status */
|
||||
ADM_PS_FCS = (1 << 3) /* Flow control status */
|
||||
};
|
||||
|
||||
/*
|
||||
* Split the register address in phy id and register
|
||||
* it will get combined again by the mdio bus op
|
||||
|
|
|
|||
Loading…
Reference in New Issue