build: move mkits.sh script to more common place

Signed-off-by: Luka Perkov <luka@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38430 3c298f89-4303-0410-b956-a3cf2f4a3e73

include/image.mk

@@ -87,6 +87,13 @@ define Image/BuildKernel/MkuImageARM
 		-n 'ARM OpenWrt Linux-$(LINUX_VERSION)' -d $(2) $(3)
 endef
 
+define Image/BuildKernel/MkFIT
+	$(TOPDIR)/scripts/mkits.sh \
+		-D $(1) -o $(KDIR)/fit-$(1).its -k $(2) -d $(3) -C $(4) -a $(5) -e $(6) \
+		-A $(ARCH) -v $(LINUX_VERSION)
+	PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $(KDIR)/fit-$(1).its $(KDIR)/fit-$(1)$(7).itb
+endef
+
 define Image/mkfs/jffs2/sub
 		# FIXME: removing this line will cause strange behaviour in the foreach loop below
 		$(STAGING_DIR_HOST)/bin/mkfs.jffs2 $(3) --pad -e $(patsubst %k,%KiB,$(1)) -o $(KDIR)/root.jffs2-$(2) -d $(TARGET_DIR) -v 2>&1 1>/dev/null | awk '/^.+$$$$/'

scripts/mkits.sh

@@ -16,24 +16,26 @@
 
 usage() {
 	echo "Usage: `basename $0` -A arch -C comp -a addr -e entry" \
-		"-v version -k kernel [-d dtb] -o its_file"
+		"-v version -k kernel [-D name -d dtb] -o its_file"
 	echo -e "\t-A ==> set architecture to 'arch'"
 	echo -e "\t-C ==> set compression type 'comp'"
 	echo -e "\t-a ==> set load address to 'addr' (hex)"
 	echo -e "\t-e ==> set entry point to 'entry' (hex)"
 	echo -e "\t-v ==> set kernel version to 'version'"
 	echo -e "\t-k ==> include kernel image 'kernel'"
+	echo -e "\t-D ==> human friendly Device Tree Blob 'name'"
 	echo -e "\t-d ==> include Device Tree Blob 'dtb'"
 	echo -e "\t-o ==> create output file 'its_file'"
 	exit 1
 }
 
-while getopts ":A:C:a:d:e:k:o:v:" OPTION
+while getopts ":A:a:C:D:d:e:k:o:v:" OPTION
 do
 	case $OPTION in
 		A ) ARCH=$OPTARG;;
-		C ) COMPRESS=$OPTARG;;
 		a ) LOAD_ADDR=$OPTARG;;
+		C ) COMPRESS=$OPTARG;;
+		D ) DEVICE=$OPTARG;;
 		d ) DTB=$OPTARG;;
 		e ) ENTRY_ADDR=$OPTARG;;
 		k ) KERNEL=$OPTARG;;
@@ -51,16 +53,18 @@ if [ -z "${ARCH}" ] || [ -z "${COMPRESS}" ] || [ -z "${LOAD_ADDR}" ] || \
 	usage
 fi
 
+ARCH_UPPER=`echo $ARCH | tr '[:lower:]' '[:upper:]'`
+
 # Create a default, fully populated DTS file
 DATA="/dts-v1/;
 
 / {
-	description = \"Linux kernel ${VERSION}\";
+	description = \"${ARCH_UPPER} OpenWrt FIT (Flattened Image Tree)\";
 	#address-cells = <1>;
 
 	images {
 		kernel@1 {
-			description = \"Linux Kernel ${VERSION}\";
+			description = \"${ARCH_UPPER} OpenWrt Linux-${VERSION}\";
 			data = /incbin/(\"${KERNEL}\");
 			type = \"kernel\";
 			arch = \"${ARCH}\";
@@ -76,8 +80,8 @@ DATA="/dts-v1/;
 			};
 		};
 
-		fdt@1 { /* start fdt */
+		fdt@1 {
-			description = \"Flattened Device Tree blob\";
+			description = \"${ARCH_UPPER} OpenWrt ${DEVICE} device tree blob\";
 			data = /incbin/(\"${DTB}\");
 			type = \"flat_dt\";
 			arch = \"${ARCH}\";
@@ -88,13 +92,13 @@ DATA="/dts-v1/;
 			hash@2 {
 				algo = \"sha1\";
 			};
-		}; /* end fdt */
+		};
 	};
 
 	configurations {
 		default = \"config@1\";
 		config@1 {
-			description = \"Default Linux kernel\";
+			description = \"OpenWrt\";
 			kernel = \"kernel@1\";
 			fdt = \"fdt@1\";
 		};

target/linux/imx6/image/Makefile

@@ -11,22 +11,25 @@ BOARDS := \
 	imx6dl-wandboard \
 	imx6q-gw5400-a
 
-# board-specific Flattened Image Tree
-define mkfit
-	/bin/sh $(LINUX_DIR)/scripts/mkits.sh -A arm -C none -a $(2) -e $(2) \
-		-v 'OpenWrt Linux-$(LINUX_VERSION)' \
-		-d $(LINUX_DIR)/arch/arm/boot/dts/$(1).dtb -k $(LINUX_DIR)/arch/arm/boot/zImage \
-		-o $(KDIR)/$(1)-uImage.its
-	PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $(KDIR)/$(1)-uImage.its $(BIN_DIR)/openwrt-$(1)-uImage.itb
-endef
-
 # emit FIT images, DTB's and generic zImage
 define Image/BuildKernel
 	$(foreach board,$(BOARDS),
-		$(call mkfit,$(board),0x10008000)
+		cp $(LINUX_DIR)/arch/arm/boot/dts/$(board).dtb $(BIN_DIR)/$(IMG_PREFIX)-$(board).dtb
-		cp $(LINUX_DIR)/arch/arm/boot/dts/$(board).dtb $(BIN_DIR)
+
+		$(call Image/BuildKernel/MkFIT,$(board),$(KDIR)/zImage,$(BIN_DIR)/$(IMG_PREFIX)-$(board).dtb,none,0x10008000,0x10008000)
+		cp $(KDIR)/fit-$(board).itb $(BIN_DIR)/$(IMG_PREFIX)-$(board)-uImage.itb
+
+ ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
+		$(call Image/BuildKernel/MkFIT,$(board),$(KDIR)/zImage-initramfs,$(BIN_DIR)/$(IMG_PREFIX)-$(board).dtb,none,0x10008000,0x10008000,-initramfs)
+		cp $(KDIR)/fit-$(board)-initramfs.itb $(BIN_DIR)/$(IMG_PREFIX)-$(board)-uImage-initramfs.itb
+ endif
 	)
-	cp $(KDIR)/zImage $(BIN_DIR)/openwrt-$(BOARD)-zImage
+
+	cp $(KDIR)/zImage $(BIN_DIR)/$(IMG_PREFIX)-zImage
+
+ ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
+	cp $(KDIR)/zImage-initramfs $(BIN_DIR)/$(IMG_PREFIX)-zImage-initramfs
+ endif
 endef
 
 # board-specific sysupgrade image