ar71xx: merge changes from 3.10 that were forgotten for 3.14

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43347 3c298f89-4303-0410-b956-a3cf2f4a3e73
master
Felix Fietkau 2014-11-23 16:27:19 +00:00
parent e238d1b161
commit 4ac29a2396
19 changed files with 153 additions and 29 deletions

View File

@ -41,6 +41,7 @@ CONFIG_ATH79_MACH_BHU_BXU2000N2_A=y
CONFIG_ATH79_MACH_CAP4200AG=y
CONFIG_ATH79_MACH_CARAMBOLA2=y
CONFIG_ATH79_MACH_DB120=y
CONFIG_ATH79_MACH_DHP_1565_A1=y
CONFIG_ATH79_MACH_DIR_505_A1=y
CONFIG_ATH79_MACH_DIR_600_A1=y
CONFIG_ATH79_MACH_DIR_615_C1=y
@ -120,6 +121,7 @@ CONFIG_ATH79_MACH_WNDR3700=y
CONFIG_ATH79_MACH_WNDR4300=y
CONFIG_ATH79_MACH_WNR2000=y
CONFIG_ATH79_MACH_WNR2000_V3=y
CONFIG_ATH79_MACH_WNR2000_V4=y
CONFIG_ATH79_MACH_WNR2200=y
CONFIG_ATH79_MACH_WP543=y
CONFIG_ATH79_MACH_WPE72=y
@ -246,7 +248,6 @@ CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_SPLIT_FIRMWARE=y
CONFIG_MTD_SPLIT_LZMA_FW=y
CONFIG_MTD_SPLIT_SEAMA_FW=y
CONFIG_MTD_SPLIT_SQUASHFS_ROOT=y
CONFIG_MTD_SPLIT_UIMAGE_FW=y
CONFIG_MTD_TPLINK_PARTS=y
CONFIG_MTD_WRT160NL_PARTS=y

View File

@ -1,6 +1,6 @@
--- a/arch/mips/ath79/mach-ubnt-xm.c
+++ b/arch/mips/ath79/mach-ubnt-xm.c
@@ -332,3 +332,60 @@ static void __init ubnt_uap_pro_setup(vo
@@ -332,3 +332,78 @@ static void __init ubnt_uap_pro_setup(vo
MIPS_MACHINE(ATH79_MACH_UBNT_UAP_PRO, "UAP-PRO", "Ubiquiti UniFi AP Pro",
ubnt_uap_pro_setup);
@ -29,7 +29,7 @@
+ },
+};
+
+static void __init ubnt_nano_m_xw_setup(void)
+static void __init ubnt_xw_init(void)
+{
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
+
@ -44,26 +44,48 @@
+ ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL);
+ ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL);
+
+ ath79_register_mdio(0, ~(BIT(0) | BIT(1) | BIT(5)));
+
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_MII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0_SLAVE);
+ ath79_init_mac(ath79_eth0_data.mac_addr,
+ eeprom + UAP_PRO_MAC0_OFFSET, 0);
+
+ /* GMAC0 is connected to an AR8326 switch */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+}
+
+static void __init ubnt_nano_m_xw_setup(void)
+{
+ ubnt_xw_init();
+
+ /* GMAC0 is connected to an AR8326 switch */
+ ath79_register_mdio(0, ~(BIT(0) | BIT(1) | BIT(5)));
+ ath79_eth0_data.phy_mask = (BIT(0) | BIT(1) | BIT(5));
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+ ath79_register_eth(0);
+}
+
+static void __init ubnt_loco_m_xw_setup(void)
+{
+ ubnt_xw_init();
+
+ ath79_register_mdio(0, ~BIT(1));
+ ath79_eth0_data.phy_mask = BIT(1);
+ ath79_register_eth(0);
+}
+
+MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M_XW, "UBNT-NM-XW", "Ubiquiti Nanostation M XW",
+ ubnt_nano_m_xw_setup);
+
+MIPS_MACHINE(ATH79_MACH_UBNT_LOCO_M_XW, "UBNT-LOCO-XW", "Ubiquiti Loco M XW",
+ ubnt_loco_m_xw_setup);
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -124,6 +124,7 @@ enum ath79_mach_type {
@@ -121,9 +121,11 @@ enum ath79_mach_type {
ATH79_MACH_TL_WR941ND, /* TP-LINK TL-WR941ND */
ATH79_MACH_UBNT_AIRROUTER, /* Ubiquiti AirRouter */
ATH79_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */
+ ATH79_MACH_UBNT_LOCO_M_XW, /* Ubiquiti Loco M XW */
ATH79_MACH_UBNT_LSSR71, /* Ubiquiti LS-SR71 */
ATH79_MACH_UBNT_LSX, /* Ubiquiti LSX */
ATH79_MACH_UBNT_NANO_M, /* Ubiquiti NanoStation M */

View File

@ -0,0 +1,39 @@
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -470,6 +470,16 @@ config ATH79_MACH_WNR2000_V3
select ATH79_DEV_M25P80
select ATH79_DEV_USB
+config ATH79_MACH_WNR2000_V4
+ bool "NETGEAR WNR2000 V4"
+ select SOC_AR934X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_OM2P
bool "OpenMesh OM2P board support"
select SOC_AR724X
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
@@ -114,6 +114,7 @@ obj-$(CONFIG_ATH79_MACH_WNDR3700) += mac
obj-$(CONFIG_ATH79_MACH_WNDR4300) += mach-wndr4300.o
obj-$(CONFIG_ATH79_MACH_WNR2000) += mach-wnr2000.o
obj-$(CONFIG_ATH79_MACH_WNR2000_V3) += mach-wnr2000-v3.o
+obj-$(CONFIG_ATH79_MACH_WNR2000_V4) += mach-wnr2000-v4.o
obj-$(CONFIG_ATH79_MACH_WNR2200) += mach-wnr2200.o
obj-$(CONFIG_ATH79_MACH_WP543) += mach-wp543.o
obj-$(CONFIG_ATH79_MACH_WPE72) += mach-wpe72.o
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -144,6 +144,7 @@ enum ath79_mach_type {
ATH79_MACH_WNDR4300, /* NETGEAR WNDR4300 */
ATH79_MACH_WNR2000, /* NETGEAR WNR2000 */
ATH79_MACH_WNR2000_V3, /* NETGEAR WNR2000 v3 */
+ ATH79_MACH_WNR2000_V4, /* NETGEAR WNR2000 v4 */
ATH79_MACH_WNR2200, /* NETGEAR WNR2200 */
ATH79_MACH_WNR612_V2, /* NETGEAR WNR612 v2 */
ATH79_MACH_WP543, /* Compex WP543 */

View File

@ -10,7 +10,7 @@
ATH79_MACH_MZK_W300NH, /* Planex MZK-W300NH */
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -820,6 +820,16 @@ config ATH79_MACH_MYNET_N600
@@ -830,6 +830,16 @@ config ATH79_MACH_MYNET_N600
select ATH79_DEV_WMAC
select ATH79_NVRAM

View File

@ -10,7 +10,7 @@
ATH79_MACH_TL_WR1043ND_V2, /* TP-LINK TL-WR1043ND v2 */
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -549,8 +549,9 @@ config ATH79_MACH_EAP7660D
@@ -559,8 +559,9 @@ config ATH79_MACH_EAP7660D
select ATH79_DEV_M25P80
config ATH79_MACH_ARCHER_C7

View File

@ -22,7 +22,7 @@ meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed.
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -929,6 +929,10 @@ config SOC_AR934X
@@ -939,6 +939,10 @@ config SOC_AR934X
select PCI_AR724X if PCI
def_bool n
@ -33,7 +33,7 @@ meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed.
config SOC_QCA955X
select USB_ARCH_HAS_EHCI
select HW_HAS_PCI
@@ -972,7 +976,7 @@ config ATH79_DEV_USB
@@ -982,7 +986,7 @@ config ATH79_DEV_USB
def_bool n
config ATH79_DEV_WMAC

View File

@ -1,6 +1,6 @@
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -716,6 +716,15 @@ config ATH79_MACH_TL_WR841N_V8
@@ -726,6 +726,15 @@ config ATH79_MACH_TL_WR841N_V8
select ATH79_DEV_USB
select ATH79_DEV_WMAC

View File

@ -1,6 +1,6 @@
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
@@ -130,3 +130,4 @@ obj-$(CONFIG_ATH79_MACH_WZR_HP_AG300H) +
@@ -131,3 +131,4 @@ obj-$(CONFIG_ATH79_MACH_WZR_HP_AG300H) +
obj-$(CONFIG_ATH79_MACH_WZR_HP_G450H) += mach-wzr-hp-g450h.o
obj-$(CONFIG_ATH79_MACH_ZCN_1523H) += mach-zcn-1523h.o
obj-$(CONFIG_ATH79_MACH_CARAMBOLA2) += mach-carambola2.o
@ -17,7 +17,7 @@
ATH79_MACH_OM2P, /* OpenMesh OM2P */
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -899,6 +899,17 @@ config ATH79_MACH_NBG460N
@@ -909,6 +909,17 @@ config ATH79_MACH_NBG460N
select ATH79_DEV_M25P80
select ATH79_DEV_WMAC

View File

@ -1,6 +1,6 @@
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -656,6 +656,16 @@ config ATH79_MACH_TL_WAX50RE
@@ -666,6 +666,16 @@ config ATH79_MACH_TL_WAX50RE
select ATH79_DEV_M25P80
select ATH79_DEV_WMAC

View File

@ -7,7 +7,7 @@
+ ATH79_MACH_TUBE2H, /* Alfa Network Tube2H */
ATH79_MACH_UBNT_AIRROUTER, /* Ubiquiti AirRouter */
ATH79_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */
ATH79_MACH_UBNT_LSSR71, /* Ubiquiti LS-SR71 */
ATH79_MACH_UBNT_LOCO_M_XW, /* Ubiquiti Loco M XW */
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -29,6 +29,15 @@ config ATH79_MACH_ALFA_NX

View File

@ -12,10 +12,10 @@
#include "dev-ap9x-pci.h"
#include "dev-eth.h"
#include "dev-gpio-buttons.h"
@@ -389,3 +391,65 @@ static void __init ubnt_nano_m_xw_setup(
@@ -407,3 +409,65 @@ MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M_XW,
MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M_XW, "UBNT-NM-XW", "Ubiquiti Nanostation M XW",
ubnt_nano_m_xw_setup);
MIPS_MACHINE(ATH79_MACH_UBNT_LOCO_M_XW, "UBNT-LOCO-XW", "Ubiquiti Loco M XW",
ubnt_loco_m_xw_setup);
+
+static struct gpio_led ubnt_airgateway_gpio_leds[] __initdata = {
+ {
@ -87,4 +87,4 @@
+ ATH79_MACH_UBNT_AIRGW, /* Ubiquiti AirGateway */
ATH79_MACH_UBNT_AIRROUTER, /* Ubiquiti AirRouter */
ATH79_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */
ATH79_MACH_UBNT_LSSR71, /* Ubiquiti LS-SR71 */
ATH79_MACH_UBNT_LOCO_M_XW, /* Ubiquiti Loco M XW */

View File

@ -10,7 +10,7 @@
ATH79_MACH_RB_411, /* MikroTik RouterBOARD 411/411A/411AH */
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -587,6 +587,15 @@ config ATH79_MACH_OM2P
@@ -597,6 +597,15 @@ config ATH79_MACH_OM2P
select ATH79_DEV_M25P80
select ATH79_DEV_WMAC

View File

@ -10,7 +10,7 @@
ATH79_MACH_BHU_BXU2000N2_A1, /* BHU BXU2000n-2 A1 */
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -654,7 +654,7 @@ config ATH79_MACH_EAP7660D
@@ -664,7 +664,7 @@ config ATH79_MACH_EAP7660D
select ATH79_DEV_M25P80
config ATH79_MACH_ARCHER_C7

View File

@ -0,0 +1,22 @@
--- a/arch/mips/ath79/mach-rb2011.c
+++ b/arch/mips/ath79/mach-rb2011.c
@@ -323,7 +323,7 @@ MIPS_MACHINE_NONAME(ATH79_MACH_RB_2011US
static void __init rb2011r5_setup(void)
{
- rb2011_setup(RB2011_FLAG_SFP | RB2011_FLAG_USB);
+ rb2011_setup(RB2011_FLAG_SFP | RB2011_FLAG_USB | RB2011_FLAG_WLAN);
}
MIPS_MACHINE_NONAME(ATH79_MACH_RB_2011R5, "2011r5", rb2011r5_setup);
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -99,7 +99,7 @@ enum ath79_mach_type {
ATH79_MACH_RB_2011G, /* Mikrotik RouterBOARD 2011UAS-2HnD */
ATH79_MACH_RB_2011L, /* Mikrotik RouterBOARD 2011L */
ATH79_MACH_RB_2011US, /* Mikrotik RouterBOARD 2011UAS */
- ATH79_MACH_RB_2011R5, /* Mikrotik RouterBOARD 2011UiAS */
+ ATH79_MACH_RB_2011R5, /* Mikrotik RouterBOARD 2011UiAS(-2Hnd) */
ATH79_MACH_RB_SXTLITE2ND, /* Mikrotik RouterBOARD SXT Lite 2nD */
ATH79_MACH_RB_SXTLITE5ND, /* Mikrotik RouterBOARD SXT Lite 5nD */
ATH79_MACH_RW2458N, /* Redwave RW2458N */

View File

@ -1,6 +1,6 @@
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -1034,6 +1034,17 @@ config ATH79_MACH_BHU_BXU2000N2_A
@@ -1044,6 +1044,17 @@ config ATH79_MACH_BHU_BXU2000N2_A
select ATH79_DEV_USB
select ATH79_DEV_WMAC

View File

@ -1,6 +1,6 @@
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -182,6 +182,7 @@ enum ath79_mach_type {
@@ -184,6 +184,7 @@ enum ath79_mach_type {
ATH79_MACH_WZR_HP_G300NH, /* Buffalo WZR-HP-G300NH */
ATH79_MACH_WZR_HP_G300NH2, /* Buffalo WZR-HP-G300NH2 */
ATH79_MACH_WZR_HP_G450H, /* Buffalo WZR-HP-G450H */
@ -29,7 +29,7 @@
select SOC_AR71XX
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
@@ -140,6 +140,7 @@ obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH) +
@@ -141,6 +141,7 @@ obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH) +
obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH2) += mach-wzr-hp-g300nh2.o
obj-$(CONFIG_ATH79_MACH_WZR_HP_AG300H) += mach-wzr-hp-ag300h.o
obj-$(CONFIG_ATH79_MACH_WZR_HP_G450H) += mach-wzr-hp-g450h.o

View File

@ -0,0 +1,40 @@
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -39,6 +39,7 @@ enum ath79_mach_type {
ATH79_MACH_CARAMBOLA2, /* 8devices Carambola2 */
ATH79_MACH_DB120, /* Atheros DB120 reference board */
ATH79_MACH_PB44, /* Atheros PB44 reference board */
+ ATH79_MACH_DHP_1565_A1, /* D-Link DHP-1565 rev. A1 */
ATH79_MACH_DIR_505_A1, /* D-Link DIR-505 rev. A1 */
ATH79_MACH_DIR_600_A1, /* D-Link DIR-600 rev. A1 */
ATH79_MACH_DIR_615_C1, /* D-Link DIR-615 rev. C1 */
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -293,6 +293,17 @@ config ATH79_MACH_WPE72
select ATH79_DEV_USB
select MYLOADER
+config ATH79_MACH_DHP_1565_A1
+ bool "D-Link DHP-1565 rev. A1 board support"
+ select SOC_AR934X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_DIR_505_A1
bool "D-Link DIR-505-A1 support"
select SOC_AR933X
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
@@ -54,6 +54,7 @@ obj-$(CONFIG_ATH79_MACH_AW_NR580) += mac
obj-$(CONFIG_ATH79_MACH_BHU_BXU2000N2_A)+= mach-bhu-bxu2000n2-a.o
obj-$(CONFIG_ATH79_MACH_CAP4200AG) += mach-cap4200ag.o
obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o
+obj-$(CONFIG_ATH79_MACH_DHP_1565_A1) += mach-dhp-1565-a1.o
obj-$(CONFIG_ATH79_MACH_DIR_505_A1) += mach-dir-505-a1.o
obj-$(CONFIG_ATH79_MACH_DIR_600_A1) += mach-dir-600-a1.o
obj-$(CONFIG_ATH79_MACH_DIR_615_C1) += mach-dir-615-c1.o

View File

@ -1,6 +1,6 @@
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -654,6 +654,16 @@ config ATH79_MACH_CAP4200AG
@@ -685,6 +685,16 @@ config ATH79_MACH_CAP4200AG
select ATH79_DEV_M25P80
select ATH79_DEV_WMAC
@ -19,7 +19,7 @@
select SOC_AR71XX
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
@@ -74,6 +74,7 @@ obj-$(CONFIG_ATH79_MACH_JA76PF) += mach
@@ -75,6 +75,7 @@ obj-$(CONFIG_ATH79_MACH_JA76PF) += mach
obj-$(CONFIG_ATH79_MACH_JWAP003) += mach-jwap003.o
obj-$(CONFIG_ATH79_MACH_HORNET_UB) += mach-hornet-ub.o
obj-$(CONFIG_ATH79_MACH_MR600) += mach-mr600.o
@ -29,7 +29,7 @@
obj-$(CONFIG_ATH79_MACH_MYNET_REXT) += mach-mynet-rext.o
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -65,6 +65,7 @@ enum ath79_mach_type {
@@ -66,6 +66,7 @@ enum ath79_mach_type {
ATH79_MACH_HORNET_UB, /* ALFA Networks Hornet-UB */
ATH79_MACH_MR600V2, /* OpenMesh MR600v2 */
ATH79_MACH_MR600, /* OpenMesh MR600 */

View File

@ -1,6 +1,6 @@
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -66,6 +66,7 @@ enum ath79_mach_type {
@@ -67,6 +67,7 @@ enum ath79_mach_type {
ATH79_MACH_MR600V2, /* OpenMesh MR600v2 */
ATH79_MACH_MR600, /* OpenMesh MR600 */
ATH79_MACH_MR900, /* OpenMesh MR900 */