ar71xx: improve support for the My Net Wi-Fi Range Extender device
This patch improves support for the device considerably. 1. The wifi didn't work in the initial release. This was because the WMAC of the AR9340 is not connected to the antennas. (However, it can pick up wifi signals, if they are strong enough!) Instead there's a dedicated AR9300 chip on the same board, which works. 2. Ethernet throughput is improved. iperf shows that the hardware can sustain more than 200Mbit/s and no longer drops any packages when the link is under load. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Patchwork: http://patchwork.openwrt.org/patch/4461/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38949 3c298f89-4303-0410-b956-a3cf2f4a3e73master
parent
4b982f247b
commit
49be2ba8e1
|
@ -153,10 +153,9 @@ static void __init mynet_rext_setup(void)
|
|||
ARRAY_SIZE(mynet_rext_gpio_keys),
|
||||
mynet_rext_gpio_keys);
|
||||
|
||||
mynet_rext_get_mac("wl0_hwaddr=", tmpmac);
|
||||
ath79_register_wmac(art + MYNET_REXT_WMAC_CALDATA_OFFSET, tmpmac);
|
||||
|
||||
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
|
||||
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
|
||||
AR934X_ETH_CFG_RXD_DELAY |
|
||||
AR934X_ETH_CFG_RDV_DELAY);
|
||||
|
||||
ath79_register_mdio(0, 0x0);
|
||||
|
||||
|
@ -169,6 +168,10 @@ static void __init mynet_rext_setup(void)
|
|||
ath79_eth0_pll_data.pll_1000 = 0x0e000000; /* athrs_mac.c */
|
||||
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
|
||||
ath79_register_eth(0);
|
||||
|
||||
/* WLAN */
|
||||
mynet_rext_get_mac("wl0_hwaddr=", tmpmac);
|
||||
ap91_pci_init(art + MYNET_REXT_WMAC_CALDATA_OFFSET, tmpmac);
|
||||
}
|
||||
|
||||
MIPS_MACHINE(ATH79_MACH_MYNET_REXT, "MYNET-REXT",
|
||||
|
|
|
@ -20,13 +20,14 @@
|
|||
obj-$(CONFIG_ATH79_MACH_NBG460N) += mach-nbg460n.o
|
||||
--- a/arch/mips/ath79/Kconfig
|
||||
+++ b/arch/mips/ath79/Kconfig
|
||||
@@ -801,6 +801,16 @@ config ATH79_MACH_MYNET_N600
|
||||
@@ -801,6 +801,17 @@ config ATH79_MACH_MYNET_N600
|
||||
select ATH79_DEV_WMAC
|
||||
select ATH79_NVRAM
|
||||
|
||||
+config ATH79_MACH_MYNET_REXT
|
||||
+ bool "WD My Net Wi-Fi Range Extender board support"
|
||||
+ select SOC_AR934X
|
||||
+ select ATH79_DEV_AP9X_PCI if PCI
|
||||
+ select ATH79_DEV_ETH
|
||||
+ select ATH79_DEV_GPIO_BUTTONS
|
||||
+ select ATH79_DEV_LEDS_GPIO
|
||||
|
|
Loading…
Reference in New Issue