gemini: add support for wiligear wbd-222 (patch by Darius Augulis)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20949 3c298f89-4303-0410-b956-a3cf2f4a3e73master
Felix Fietkau
parent
64ab9ac1e8
commit
42bb6302d4
|
|
@ -91,6 +91,7 @@ CONFIG_LEGACY_PTYS=y
|
|||
# CONFIG_MACH_NAS4220B is not set
|
||||
# CONFIG_MACH_RUT100 is not set
|
||||
CONFIG_MACH_WBD111=y
|
||||
CONFIG_MACH_WBD222=y
|
||||
CONFIG_MDIO_BITBANG=y
|
||||
CONFIG_MDIO_GPIO=y
|
||||
# CONFIG_MG_DISK is not set
|
||||
|
|
|
|||
|
|
@ -11,12 +11,17 @@ define Image/Prepare
|
|||
# WBD111: mach id 1690 (0x69a)
|
||||
echo -en "\x06\x1c\xa0\xe3\x9a\x10\x81\xe3" > $(KDIR)/$(IMG_PREFIX)-wbd111-zImage
|
||||
cat $(LINUX_DIR)/arch/arm/boot/zImage >> $(KDIR)/$(IMG_PREFIX)-wbd111-zImage
|
||||
# WBD222: mach id 2753 (0xAC1)
|
||||
echo -en "\x0a\x1c\xa0\xe3\xc1\x10\x81\xe3" > $(KDIR)/$(IMG_PREFIX)-wbd222-zImage
|
||||
cat $(LINUX_DIR)/arch/arm/boot/zImage >> $(KDIR)/$(IMG_PREFIX)-wbd222-zImage
|
||||
endef
|
||||
|
||||
define Image/BuildKernel
|
||||
# workaround the bootloader's bug with extra nops
|
||||
echo -en "\x00\x00\xa0\xe1\x00\x00\xa0\xe1\x00\x00\xa0\xe1\x00\x00\xa0\xe1" > $(BIN_DIR)/$(IMG_PREFIX)-wbd111-zImage
|
||||
cat $(KDIR)/$(IMG_PREFIX)-wbd111-zImage >> $(BIN_DIR)/$(IMG_PREFIX)-wbd111-zImage
|
||||
echo -en "\x00\x00\xa0\xe1\x00\x00\xa0\xe1\x00\x00\xa0\xe1\x00\x00\xa0\xe1" > $(BIN_DIR)/$(IMG_PREFIX)-wbd222-zImage
|
||||
cat $(KDIR)/$(IMG_PREFIX)-wbd222-zImage >> $(BIN_DIR)/$(IMG_PREFIX)-wbd222-zImage
|
||||
endef
|
||||
|
||||
define Image/Build/jffs2-64k
|
||||
|
|
@ -41,6 +46,13 @@ define Image/Build
|
|||
-o $(BIN_DIR)/$(IMG_PREFIX)-wbd111-$(1).bin \
|
||||
-p Kernel:0x020000:0x100000:0:0:$(BIN_DIR)/$(IMG_PREFIX)-wbd111-zImage \
|
||||
-p Ramdisk:0x120000:0x500000:0:0:$(BIN_DIR)/$(IMG_PREFIX)-$(1).img
|
||||
|
||||
-$(STAGING_DIR_HOST)/bin/mkfwimage2 \
|
||||
-m GEOS -f 0x30000000 -z \
|
||||
-v WILI-S.WBD222.v5.00.SL3512.OpenWrt.00000.000000.000000 \
|
||||
-o $(BIN_DIR)/$(IMG_PREFIX)-wbd222-$(1).bin \
|
||||
-p Kernel:0x020000:0x100000:0:0:$(BIN_DIR)/$(IMG_PREFIX)-wbd222-zImage \
|
||||
-p Ramdisk:0x120000:0x500000:0:0:$(BIN_DIR)/$(IMG_PREFIX)-$(1).img
|
||||
endef
|
||||
|
||||
$(eval $(call BuildImage))
|
||||
|
|
|
|||
|
|
@ -0,0 +1,203 @@
|
|||
--- a/arch/arm/mach-gemini/Kconfig
|
||||
+++ b/arch/arm/mach-gemini/Kconfig
|
||||
@@ -23,6 +23,13 @@ config MACH_WBD111
|
||||
Say Y here if you intend to run this kernel on a
|
||||
Wiliboard WBD-111.
|
||||
|
||||
+config MACH_WBD222
|
||||
+ bool "Wiliboard WBD-222"
|
||||
+ select GEMINI_MEM_SWAP
|
||||
+ help
|
||||
+ Say Y here if you intend to run this kernel on a
|
||||
+ Wiliboard WBD-222.
|
||||
+
|
||||
endmenu
|
||||
|
||||
config GEMINI_MEM_SWAP
|
||||
--- a/arch/arm/mach-gemini/Makefile
|
||||
+++ b/arch/arm/mach-gemini/Makefile
|
||||
@@ -12,3 +12,4 @@ obj-$(CONFIG_PCI) += pci.o
|
||||
obj-$(CONFIG_MACH_NAS4220B) += board-nas4220b.o
|
||||
obj-$(CONFIG_MACH_RUT100) += board-rut1xx.o
|
||||
obj-$(CONFIG_MACH_WBD111) += board-wbd111.o
|
||||
+obj-$(CONFIG_MACH_WBD222) += board-wbd222.o
|
||||
--- /dev/null
|
||||
+++ b/arch/arm/mach-gemini/board-wbd222.c
|
||||
@@ -0,0 +1,170 @@
|
||||
+/*
|
||||
+ * Support for Wiliboard WBD-222
|
||||
+ *
|
||||
+ * Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org>
|
||||
+ *
|
||||
+ * This program is free software; you can redistribute it and/or modify
|
||||
+ * it under the terms of the GNU General Public License as published by
|
||||
+ * the Free Software Foundation; either version 2 of the License, or
|
||||
+ * (at your option) any later version.
|
||||
+ */
|
||||
+#include <linux/kernel.h>
|
||||
+#include <linux/init.h>
|
||||
+#include <linux/platform_device.h>
|
||||
+#include <linux/leds.h>
|
||||
+#include <linux/input.h>
|
||||
+#include <linux/skbuff.h>
|
||||
+#include <linux/gpio_keys.h>
|
||||
+#include <linux/mdio-gpio.h>
|
||||
+#include <linux/mtd/mtd.h>
|
||||
+#include <linux/mtd/partitions.h>
|
||||
+#include <asm/mach-types.h>
|
||||
+#include <asm/mach/arch.h>
|
||||
+#include <asm/mach/time.h>
|
||||
+
|
||||
+#include <mach/gmac.h>
|
||||
+
|
||||
+#include "common.h"
|
||||
+
|
||||
+static struct mdio_gpio_platform_data wbd222_mdio = {
|
||||
+ .mdc = 22,
|
||||
+ .mdio = 21,
|
||||
+ .phy_mask = ~((1 << 1) | (1 << 3)),
|
||||
+};
|
||||
+
|
||||
+static struct platform_device wbd222_phy_device = {
|
||||
+ .name = "mdio-gpio",
|
||||
+ .id = 0,
|
||||
+ .dev = {
|
||||
+ .platform_data = &wbd222_mdio,
|
||||
+ },
|
||||
+};
|
||||
+
|
||||
+static struct gemini_gmac_platform_data gmac_data = {
|
||||
+ .bus_id[0] = "0:01",
|
||||
+ .interface[0] = PHY_INTERFACE_MODE_MII,
|
||||
+ .bus_id[1] = "0:03",
|
||||
+ .interface[1] = PHY_INTERFACE_MODE_MII,
|
||||
+};
|
||||
+
|
||||
+static struct gpio_keys_button wbd222_keys[] = {
|
||||
+ {
|
||||
+ .code = KEY_SETUP,
|
||||
+ .gpio = 5,
|
||||
+ .active_low = 1,
|
||||
+ .desc = "reset",
|
||||
+ .type = EV_KEY,
|
||||
+ },
|
||||
+};
|
||||
+
|
||||
+static struct gpio_keys_platform_data wbd222_keys_data = {
|
||||
+ .buttons = wbd222_keys,
|
||||
+ .nbuttons = ARRAY_SIZE(wbd222_keys),
|
||||
+};
|
||||
+
|
||||
+static struct platform_device wbd222_keys_device = {
|
||||
+ .name = "gpio-keys",
|
||||
+ .id = -1,
|
||||
+ .dev = {
|
||||
+ .platform_data = &wbd222_keys_data,
|
||||
+ },
|
||||
+};
|
||||
+
|
||||
+static struct gpio_led wbd222_leds[] = {
|
||||
+ {
|
||||
+ .name = "L3red",
|
||||
+ .gpio = 1,
|
||||
+ },
|
||||
+ {
|
||||
+ .name = "L4green",
|
||||
+ .gpio = 2,
|
||||
+ },
|
||||
+ {
|
||||
+ .name = "L4red",
|
||||
+ .gpio = 3,
|
||||
+ },
|
||||
+ {
|
||||
+ .name = "L3green",
|
||||
+ .gpio = 5,
|
||||
+ },
|
||||
+};
|
||||
+
|
||||
+static struct gpio_led_platform_data wbd222_leds_data = {
|
||||
+ .num_leds = ARRAY_SIZE(wbd222_leds),
|
||||
+ .leds = wbd222_leds,
|
||||
+};
|
||||
+
|
||||
+static struct platform_device wbd222_leds_device = {
|
||||
+ .name = "leds-gpio",
|
||||
+ .id = -1,
|
||||
+ .dev = {
|
||||
+ .platform_data = &wbd222_leds_data,
|
||||
+ },
|
||||
+};
|
||||
+
|
||||
+static struct sys_timer wbd222_timer = {
|
||||
+ .init = gemini_timer_init,
|
||||
+};
|
||||
+
|
||||
+#ifdef CONFIG_MTD_PARTITIONS
|
||||
+static struct mtd_partition wbd222_partitions[] = {
|
||||
+ {
|
||||
+ .name = "RedBoot",
|
||||
+ .offset = 0,
|
||||
+ .size = 0x020000,
|
||||
+ .mask_flags = MTD_WRITEABLE,
|
||||
+ } , {
|
||||
+ .name = "kernel",
|
||||
+ .offset = 0x020000,
|
||||
+ .size = 0x100000,
|
||||
+ } , {
|
||||
+ .name = "rootfs",
|
||||
+ .offset = 0x120000,
|
||||
+ .size = 0x6a0000,
|
||||
+ } , {
|
||||
+ .name = "VCTL",
|
||||
+ .offset = 0x7c0000,
|
||||
+ .size = 0x010000,
|
||||
+ .mask_flags = MTD_WRITEABLE,
|
||||
+ } , {
|
||||
+ .name = "cfg",
|
||||
+ .offset = 0x7d0000,
|
||||
+ .size = 0x010000,
|
||||
+ .mask_flags = MTD_WRITEABLE,
|
||||
+ } , {
|
||||
+ .name = "FIS",
|
||||
+ .offset = 0x7e0000,
|
||||
+ .size = 0x010000,
|
||||
+ .mask_flags = MTD_WRITEABLE,
|
||||
+ }
|
||||
+};
|
||||
+#define wbd222_num_partitions ARRAY_SIZE(wbd222_partitions)
|
||||
+#else
|
||||
+#define wbd222_partitions NULL
|
||||
+#define wbd222_num_partitions 0
|
||||
+#endif /* CONFIG_MTD_PARTITIONS */
|
||||
+
|
||||
+static void __init wbd222_init(void)
|
||||
+{
|
||||
+ gemini_gpio_init();
|
||||
+ platform_register_uart();
|
||||
+ platform_register_watchdog();
|
||||
+ platform_register_pflash(SZ_8M, wbd222_partitions,
|
||||
+ wbd222_num_partitions);
|
||||
+ platform_device_register(&wbd222_leds_device);
|
||||
+ platform_device_register(&wbd222_keys_device);
|
||||
+ platform_device_register(&wbd222_phy_device);
|
||||
+ platform_register_ethernet(&gmac_data);
|
||||
+ platform_register_usb(0);
|
||||
+ platform_register_usb(1);
|
||||
+}
|
||||
+
|
||||
+MACHINE_START(WBD222, "Wiliboard WBD-222")
|
||||
+ .phys_io = 0x7fffc000,
|
||||
+ .io_pg_offst = ((0xffffc000) >> 18) & 0xfffc,
|
||||
+ .boot_params = 0x100,
|
||||
+ .map_io = gemini_map_io,
|
||||
+ .init_irq = gemini_init_irq,
|
||||
+ .timer = &wbd222_timer,
|
||||
+ .init_machine = wbd222_init,
|
||||
+MACHINE_END
|
||||
--- a/arch/arm/tools/mach-types
|
||||
+++ b/arch/arm/tools/mach-types
|
||||
@@ -2536,3 +2536,4 @@ c3ax03 MACH_C3AX03 C3AX03 2549
|
||||
mxt_td60 MACH_MXT_TD60 MXT_TD60 2550
|
||||
esyx MACH_ESYX ESYX 2551
|
||||
bulldog MACH_BULLDOG BULLDOG 2553
|
||||
+wbd222 MACH_WBD222 WBD222 2753
|
||||
Loading…
Reference in New Issue