diff --git a/target/linux/gemini/files/drivers/usb/host/ehci-fotg2.c b/target/linux/gemini/files/drivers/usb/host/ehci-fotg2.c new file mode 100644 index 0000000000..4d95f2e5c8 --- /dev/null +++ b/target/linux/gemini/files/drivers/usb/host/ehci-fotg2.c @@ -0,0 +1,258 @@ +/* + * Gemini EHCI Host Controller driver + * + * Copyright (C) 2014 Roman Yeryomin + * Copyright (C) 2012 Tobias Waldvogel + * based on GPLd code from Sony Computer Entertainment Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "ehci.h" + +#define DRV_NAME "ehci-fotg2" + +#define HCD_MISC 0x40 + +#define OTGC_SCR 0x80 +#define OTGC_INT_STS 0x84 +#define OTGC_INT_EN 0x88 + +#define GLOBAL_ISR 0xC0 +#define GLOBAL_ICR 0xC4 + +#define GLOBAL_INT_POLARITY (1 << 3) +#define GLOBAL_INT_MASK_HC (1 << 2) +#define GLOBAL_INT_MASK_OTG (1 << 1) +#define GLOBAL_INT_MASK_DEV (1 << 0) + +#define OTGC_SCR_ID (1 << 21) +#define OTGC_SCR_CROLE (1 << 20) +#define OTGC_SCR_VBUS_VLD (1 << 19) +#define OTGC_SCR_A_SRP_RESP_TYPE (1 << 8) +#define OTGC_SCR_A_SRP_DET_EN (1 << 7) +#define OTGC_SCR_A_SET_B_HNP_EN (1 << 6) +#define OTGC_SCR_A_BUS_DROP (1 << 5) +#define OTGC_SCR_A_BUS_REQ (1 << 4) + +#define OTGC_INT_APLGRMV (1 << 12) +#define OTGC_INT_BPLGRMV (1 << 11) +#define OTGC_INT_OVC (1 << 10) +#define OTGC_INT_IDCHG (1 << 9) +#define OTGC_INT_RLCHG (1 << 8) +#define OTGC_INT_AVBUSERR (1 << 5) +#define OTGC_INT_ASRPDET (1 << 4) +#define OTGC_INT_BSRPDN (1 << 0) + +#define OTGC_INT_A_TYPE ( \ + OTGC_INT_ASRPDET | \ + OTGC_INT_AVBUSERR | \ + OTGC_INT_OVC | \ + OTGC_INT_RLCHG | \ + OTGC_INT_IDCHG | \ + OTGC_INT_APLGRMV \ + ) +#define OTGC_INT_B_TYPE ( \ + OTGC_INT_AVBUSERR | \ + OTGC_INT_OVC | \ + OTGC_INT_RLCHG | \ + OTGC_INT_IDCHG \ + ) + + +static void fotg2_otg_init(struct usb_hcd *hcd) +{ + u32 val; + + writel(GLOBAL_INT_POLARITY | GLOBAL_INT_MASK_HC | + GLOBAL_INT_MASK_OTG | GLOBAL_INT_MASK_DEV, + hcd->regs + GLOBAL_ICR); + + val = readl(hcd->regs + OTGC_SCR); + val &= ~(OTGC_SCR_A_SRP_RESP_TYPE | OTGC_SCR_A_SRP_DET_EN | + OTGC_SCR_A_BUS_DROP | OTGC_SCR_A_SET_B_HNP_EN); + val |= OTGC_SCR_A_BUS_REQ; + writel(val, hcd->regs + OTGC_SCR); + + writel(OTGC_INT_A_TYPE, hcd->regs + OTGC_INT_EN); + + /* setup MISC register, fixes timing problems */ + val = readl(hcd->regs + HCD_MISC); + val |= 0xD; + writel(val, hcd->regs + HCD_MISC); + + writel(~0, hcd->regs + GLOBAL_ISR); + writel(~0, hcd->regs + OTGC_INT_STS); +} + +static int fotg2_ehci_reset(struct usb_hcd *hcd) +{ + int retval; + + retval = ehci_setup(hcd); + if (retval) + return retval; + + writel(GLOBAL_INT_POLARITY, hcd->regs + GLOBAL_ICR); + return 0; +} + +static const struct hc_driver fotg2_ehci_hc_driver = { + .description = hcd_name, + .product_desc = "FOTG2 EHCI Host Controller", + .hcd_priv_size = sizeof(struct ehci_hcd), + .irq = ehci_irq, + .flags = HCD_MEMORY | HCD_USB2, + .reset = fotg2_ehci_reset, + .start = ehci_run, + .stop = ehci_stop, + .shutdown = ehci_shutdown, + .urb_enqueue = ehci_urb_enqueue, + .urb_dequeue = ehci_urb_dequeue, + .endpoint_disable = ehci_endpoint_disable, + .endpoint_reset = ehci_endpoint_reset, + .get_frame_number = ehci_get_frame, + .hub_status_data = ehci_hub_status_data, + .hub_control = ehci_hub_control, +#if defined(CONFIG_PM) + .bus_suspend = ehci_bus_suspend, + .bus_resume = ehci_bus_resume, +#endif + .relinquish_port = ehci_relinquish_port, + .port_handed_over = ehci_port_handed_over, + + .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, +}; + +static irqreturn_t fotg2_ehci_irq(int irq, void *data) +{ + struct usb_hcd *hcd = data; + u32 icr, sts; + irqreturn_t retval; + + icr = readl(hcd->regs + GLOBAL_ICR); + writel(GLOBAL_INT_POLARITY | GLOBAL_INT_MASK_HC | + GLOBAL_INT_MASK_OTG | GLOBAL_INT_MASK_DEV, + hcd->regs + GLOBAL_ICR); + + retval = IRQ_NONE; + + sts = ~icr; + sts &= GLOBAL_INT_MASK_HC | GLOBAL_INT_MASK_OTG | GLOBAL_INT_MASK_DEV; + sts &= readl(hcd->regs + GLOBAL_ISR); + writel(sts, hcd->regs + GLOBAL_ISR); + + if (unlikely(sts & GLOBAL_INT_MASK_DEV)) { + ehci_warn(hcd_to_ehci(hcd), + "Received unexpected irq for device role\n"); + retval = IRQ_HANDLED; + } + + if (unlikely(sts & GLOBAL_INT_MASK_OTG)) { + u32 otg_sts; + + otg_sts = readl(hcd->regs + OTGC_INT_STS); + writel(otg_sts, hcd->regs + OTGC_INT_STS); + + ehci_warn(hcd_to_ehci(hcd), + "Received unexpected irq for OTG management\n"); + retval = IRQ_HANDLED; + } + + if (sts & GLOBAL_INT_MASK_HC) { + retval = IRQ_NONE; + } + + writel(icr, hcd->regs + GLOBAL_ICR); + return retval; +} + +static int fotg2_ehci_probe(struct platform_device *pdev) +{ + struct usb_hcd *hcd; + struct resource *res; + int irq , err; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + pr_err("no irq provided"); + return irq; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + pr_err("no memory resource provided"); + return -ENXIO; + } + + hcd = usb_create_hcd(&fotg2_ehci_hc_driver, &pdev->dev, + dev_name(&pdev->dev)); + if (!hcd) + return -ENOMEM; + + hcd->rsrc_start = res->start; + hcd->rsrc_len = resource_size(res); + + hcd->regs = devm_request_and_ioremap(&pdev->dev, res); + if (!hcd->regs) { + err = -ENOMEM; + goto err_put_hcd; + } + + hcd->has_tt = 1; + hcd_to_ehci(hcd)->caps = hcd->regs; + + fotg2_otg_init(hcd); + + err = request_irq(irq, &fotg2_ehci_irq, IRQF_SHARED, "fotg2", hcd); + if (err) + goto err_put_hcd; + + err = usb_add_hcd(hcd, irq, IRQF_SHARED); + if (err) + goto err_put_hcd; + + platform_set_drvdata(pdev, hcd); + return 0; + +err_put_hcd: + usb_put_hcd(hcd); + return err; +} + +static int fotg2_ehci_remove(struct platform_device *pdev) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + + writel(GLOBAL_INT_POLARITY | GLOBAL_INT_MASK_HC | + GLOBAL_INT_MASK_OTG | GLOBAL_INT_MASK_DEV, + hcd->regs + GLOBAL_ICR); + + free_irq(hcd->irq, hcd); + usb_remove_hcd(hcd); + usb_put_hcd(hcd); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +MODULE_ALIAS("platform:" DRV_NAME); + +static struct platform_driver ehci_fotg2_driver = { + .probe = fotg2_ehci_probe, + .remove = fotg2_ehci_remove, + .driver.name = DRV_NAME, +}; diff --git a/target/linux/gemini/patches-3.10/130-usb-ehci-fot2g.patch b/target/linux/gemini/patches-3.10/130-usb-ehci-fot2g.patch new file mode 100644 index 0000000000..c972dafdc2 --- /dev/null +++ b/target/linux/gemini/patches-3.10/130-usb-ehci-fot2g.patch @@ -0,0 +1,223 @@ +--- a/arch/arm/mach-gemini/devices.c 2011-04-23 01:00:16.738137491 +0200 ++++ b/arch/arm/mach-gemini/devices.c 2011-04-23 01:06:55.539299920 +0200 +@@ -188,3 +188,64 @@ + + return platform_device_register(ðernet_device); + } ++ ++static struct resource usb0_resources[] = { ++ { ++ .start = GEMINI_USB0_BASE, ++ .end = GEMINI_USB0_BASE + 0xfff, ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .start = IRQ_USB0, ++ .end = IRQ_USB0, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct resource usb1_resources[] = { ++ { ++ .start = GEMINI_USB1_BASE, ++ .end = GEMINI_USB1_BASE + 0xfff, ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .start = IRQ_USB1, ++ .end = IRQ_USB1, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static u64 usb0_dmamask = 0xffffffffUL; ++static u64 usb1_dmamask = 0xffffffffUL; ++ ++static struct platform_device usb_device[] = { ++ { ++ .name = "ehci-fotg2", ++ .id = 0, ++ .dev = { ++ .dma_mask = &usb0_dmamask, ++ .coherent_dma_mask = 0xffffffff, ++ }, ++ .num_resources = ARRAY_SIZE(usb0_resources), ++ .resource = usb0_resources, ++ }, ++ { ++ .name = "ehci-fotg2", ++ .id = 1, ++ .dev = { ++ .dma_mask = &usb1_dmamask, ++ .coherent_dma_mask = 0xffffffff, ++ }, ++ .num_resources = ARRAY_SIZE(usb1_resources), ++ .resource = usb1_resources, ++ }, ++}; ++ ++int __init platform_register_usb(unsigned int id) ++{ ++ if (id > 1) ++ return -EINVAL; ++ ++ return platform_device_register(&usb_device[id]); ++} ++ +--- a/arch/arm/mach-gemini/common.h 2011-04-23 01:09:31.413161153 +0200 ++++ b/arch/arm/mach-gemini/common.h 2011-04-23 01:09:52.426358514 +0200 +@@ -28,6 +28,7 @@ + unsigned int nr_parts); + extern int platform_register_watchdog(void); + extern int platform_register_ethernet(struct gemini_gmac_platform_data *pdata); ++extern int platform_register_usb(unsigned int id); + + extern void gemini_restart(char mode, const char *cmd); + +--- a/drivers/usb/Kconfig ++++ b/drivers/usb/Kconfig +@@ -39,6 +39,7 @@ config USB_ARCH_HAS_EHCI + default y if ARCH_MXC + default y if ARCH_MXS + default y if ARCH_OMAP3 ++ default y if ARCH_GEMINI + default y if ARCH_CNS3XXX + default y if ARCH_VT8500 + default y if PLAT_SPEAR +--- a/drivers/usb/host/ehci-hcd.c ++++ b/drivers/usb/host/ehci-hcd.c +@@ -340,12 +340,14 @@ static void ehci_silence_controller(struct ehci_hcd *ehci) + spin_lock_irq(&ehci->lock); + ehci->rh_state = EHCI_RH_HALTED; + ehci_turn_off_all_ports(ehci); + ++#ifndef CONFIG_ARCH_GEMINI + /* make BIOS/etc use companion controller during reboot */ + ehci_writel(ehci, 0, &ehci->regs->configured_flag); + + /* unblock posted writes */ + ehci_readl(ehci, &ehci->regs->configured_flag); ++#endif + spin_unlock_irq(&ehci->lock); + } + +@@ -600,7 +602,9 @@ static int ehci_run (struct usb_hcd *hcd) + // Philips, Intel, and maybe others need CMD_RUN before the + // root hub will detect new devices (why?); NEC doesn't + ehci->command &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET); ++#ifndef CONFIG_ARCH_GEMINI + ehci->command |= CMD_RUN; ++#endif + ehci_writel(ehci, ehci->command, &ehci->regs->command); + dbg_cmd (ehci, "init", ehci->command); + +@@ -620,9 +624,11 @@ static int ehci_run (struct usb_hcd *hcd) + */ + down_write(&ehci_cf_port_reset_rwsem); + ehci->rh_state = EHCI_RH_RUNNING; ++#ifndef CONFIG_ARCH_GEMINI + ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag); + ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */ + msleep(5); ++#endif + up_write(&ehci_cf_port_reset_rwsem); + ehci->last_periodic_enable = ktime_get_real(); + +@@ -763,9 +769,10 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) + pcd_status = status; + + /* resume root hub? */ ++#ifndef CONFIG_ARCH_GEMINI + if (ehci->rh_state == EHCI_RH_SUSPENDED) + usb_hcd_resume_root_hub(hcd); +- ++#endif + /* get per-port change detect bits */ + if (ehci->has_ppcd) + ppcd = status >> 16; +@@ -1228,6 +1241,11 @@ MODULE_DESCRIPTION(DRIVER_DESC); + MODULE_AUTHOR (DRIVER_AUTHOR); + MODULE_LICENSE ("GPL"); + ++#ifdef CONFIG_ARCH_GEMINI ++#include "ehci-fotg2.c" ++#define PLATFORM_DRIVER ehci_fotg2_driver ++#endif ++ + #ifdef CONFIG_USB_EHCI_FSL + #include "ehci-fsl.c" + #define PLATFORM_DRIVER ehci_fsl_driver +--- a/drivers/usb/host/ehci-timer.c 2012-12-24 18:35:19.695560879 +0100 ++++ b/drivers/usb/host/ehci-timer.c 2012-12-24 18:39:39.813308000 +0100 +@@ -207,7 +207,9 @@ + + /* Clean up the mess */ + ehci->rh_state = EHCI_RH_HALTED; ++#ifndef CONFIG_ARCH_GEMINI + ehci_writel(ehci, 0, &ehci->regs->configured_flag); ++#endif + ehci_writel(ehci, 0, &ehci->regs->intr_enable); + ehci_work(ehci); + end_unlink_async(ehci); +--- a/drivers/usb/host/ehci.h ++++ b/drivers/usb/host/ehci.h +@@ -600,7 +600,12 @@ static inline unsigned int + ehci_port_speed(struct ehci_hcd *ehci, unsigned int portsc) + { + if (ehci_is_TDI(ehci)) { +- switch ((portsc >> (ehci->has_hostpc ? 25 : 26)) & 3) { ++#ifdef CONFIG_ARCH_GEMINI ++ portsc = readl(ehci_to_hcd(ehci)->regs + 0x80); ++ switch ((portsc>>22)&3) { ++#else ++ switch ((portsc>>26)&3) { ++#endif + case 0: + return 0; + case 1: +--- a/drivers/usb/host/ehci-hub.c ++++ b/drivers/usb/host/ehci-hub.c +@@ -912,6 +912,11 @@ static int ehci_hub_control ( + /* see what we found out */ + temp = check_reset_complete (ehci, wIndex, status_reg, + ehci_readl(ehci, status_reg)); ++#ifdef CONFIG_ARCH_GEMINI ++ /* restart schedule */ ++ ehci->command |= CMD_RUN; ++ ehci_writel(ehci, ehci->command, &ehci->regs->command); ++#endif + } + + if (!(temp & (PORT_RESUME|PORT_RESET))) { +--- a/include/linux/usb/ehci_def.h 2012-12-24 15:01:10.168320497 +0100 ++++ b/include/linux/usb/ehci_def.h 2012-12-24 15:11:43.335575000 +0100 +@@ -110,9 +110,14 @@ + u32 frame_list; /* points to periodic list */ + /* ASYNCLISTADDR: offset 0x18 */ + u32 async_next; /* address of next async queue head */ +- ++#ifndef CONFIG_ARCH_GEMINI + u32 reserved1[2]; +- ++#else ++ u32 reserved1; ++ /* PORTSC: offset 0x20 for Faraday OTG */ ++ u32 port_status[1]; ++#endif ++ + /* TXFILLTUNING: offset 0x24 */ + u32 txfill_tuning; /* TX FIFO Tuning register */ + #define TXFIFO_DEFAULT (8<<16) /* FIFO burst threshold 8 */ +@@ -123,8 +128,11 @@ + u32 configured_flag; + #define FLAG_CF (1<<0) /* true: we'll support "high speed" */ + ++#ifndef CONFIG_ARCH_GEMINI + /* PORTSC: offset 0x44 */ + u32 port_status[0]; /* up to N_PORTS */ ++#endif ++ + /* EHCI 1.1 addendum */ + #define PORTSC_SUSPEND_STS_ACK 0 + #define PORTSC_SUSPEND_STS_NYET 1 diff --git a/target/linux/gemini/patches-3.10/130-usb-ehci-gemini-fot2gxx-support.patch b/target/linux/gemini/patches-3.10/130-usb-ehci-gemini-fot2gxx-support.patch deleted file mode 100644 index f4206db959..0000000000 --- a/target/linux/gemini/patches-3.10/130-usb-ehci-gemini-fot2gxx-support.patch +++ /dev/null @@ -1,611 +0,0 @@ ---- /dev/null -+++ b/drivers/usb/host/ehci-fotg2xx.c -@@ -0,0 +1,459 @@ -+/* -+ * EHCI Host Controller driver -+ * -+ * Copyright (C) 2006 Sony Computer Entertainment Inc. -+ * Copyright 2006 Sony Corp. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; version 2 of the License. -+ */ -+ -+#include -+#include -+ -+#define otg_set(port, bits) writel(readl(hcd->regs + port) | bits, hcd->regs + port) -+ -+#define otg_clear(port, bits) writel(readl(hcd->regs + port) & ~bits, hcd->regs + port) -+ -+#define GLOBAL_ISR 0xC0 -+#define GLOBAL_ICR 0xC4 -+ -+#define HCD_MISC 0x40 -+ -+#define OTGC_SCR 0x80 -+#define OTGC_INT_EN 0x88 -+ -+#define GLOBAL_INT_POLARITY (1 << 3) -+#define GLOBAL_INT_MASK_HC (1 << 2) -+#define GLOBAL_INT_MASK_OTG (1 << 1) -+#define GLOBAL_INT_MASK_DEV (1 << 0) -+ -+#define OTGC_SCR_ID (1 << 21) -+#define OTGC_SCR_CROLE (1 << 20) -+#define OTGC_SCR_VBUS_VLD (1 << 19) -+#define OTGC_SCR_A_SRP_RESP_TYPE (1 << 8) -+#define OTGC_SCR_A_SRP_DET_EN (1 << 7) -+#define OTGC_SCR_A_SET_B_HNP_EN (1 << 6) -+#define OTGC_SCR_A_BUS_DROP (1 << 5) -+#define OTGC_SCR_A_BUS_REQ (1 << 4) -+ -+#define OTGC_INT_APLGRMV (1 << 12) -+#define OTGC_INT_BPLGRMV (1 << 11) -+#define OTGC_INT_OVC (1 << 10) -+#define OTGC_INT_IDCHG (1 << 9) -+#define OTGC_INT_RLCHG (1 << 8) -+#define OTGC_INT_AVBUSERR (1 << 5) -+#define OTGC_INT_ASRPDET (1 << 4) -+#define OTGC_INT_BSRPDN (1 << 0) -+ -+#define OTGC_INT_A_TYPE (OTGC_INT_ASRPDET|OTGC_INT_AVBUSERR|OTGC_INT_OVC|OTGC_INT_RLCHG|OTGC_INT_IDCHG|OTGC_INT_APLGRMV) -+#define OTGC_INT_B_TYPE (OTGC_INT_AVBUSERR|OTGC_INT_OVC|OTGC_INT_RLCHG|OTGC_INT_IDCHG) -+ -+static void fotg2xx_otgc_role_change(struct usb_hcd *hcd); -+ -+static void fotg2xx_otgc_init(struct usb_hcd *hcd) -+{ -+ struct ehci_hcd *ehci = hcd_to_ehci(hcd); -+ unsigned int reg; -+ -+ reg = __raw_readl(hcd->regs + OTGC_SCR); -+ ehci_info(ehci, "role detected: %s, ", -+ (reg & OTGC_SCR_CROLE) ? "Peripheral" : "Host"); -+ -+ if (reg & OTGC_SCR_ID) -+ ehci_info(ehci, "B-Device (may be unsupported!)\n"); -+ else -+ ehci_info(ehci, "A-Device\n"); -+ -+ /* Enable the SRP detect */ -+ reg &= ~OTGC_SCR_A_SRP_RESP_TYPE; -+ __raw_writel(reg, hcd->regs + OTGC_SCR); -+ -+ reg = __raw_readl(hcd->regs + OTGC_INT_EN); -+ /* clear INT B: bits AVBUSERR | OVC | RLCHG | IDCHG */ -+ reg &= ~OTGC_INT_B_TYPE; -+ /* set INT A: bits ASRPDET | AVBUSERR | OVC | RLCHG | IDCHG | APLGRMV */ -+ reg |= OTGC_INT_A_TYPE; -+ __raw_writel(reg, hcd->regs + OTGC_INT_EN); -+ -+ reg = __raw_readl(hcd->regs + GLOBAL_ICR); -+ reg &= ~GLOBAL_INT_MASK_OTG; -+ __raw_writel(reg, hcd->regs + GLOBAL_ICR); -+ -+ /* setup MISC register, fixes timing problems */ -+ reg = __raw_readl(hcd->regs + HCD_MISC); -+ reg |= 0xD; -+ __raw_writel(reg, hcd->regs + HCD_MISC); -+ -+ fotg2xx_otgc_role_change(hcd); -+} -+ -+static void fotg2xx_otgh_close(struct usb_hcd *hcd) -+{ -+ unsigned int reg; -+ -+ /* <1>.Enable Interrupt Mask */ -+ reg = __raw_readl(hcd->regs + GLOBAL_ICR); -+ reg |= GLOBAL_INT_MASK_HC; -+ __raw_writel(reg, hcd->regs + GLOBAL_ICR); -+ -+ /* <2>.Clear the Interrupt status */ -+ reg = __raw_readl(hcd->regs + 0x18); -+ reg &= 0x0000003F; -+ __raw_writel(reg, hcd->regs + 0x14); -+} -+ -+static void fotg2xx_otgh_open(struct usb_hcd *hcd) -+{ -+ unsigned int reg; -+ -+ reg = __raw_readl(hcd->regs + OTGC_SCR); -+ reg &= ~OTGC_SCR_A_SRP_DET_EN; -+ __raw_writel(reg, hcd->regs + OTGC_SCR); -+ -+ reg = __raw_readl(hcd->regs + GLOBAL_ICR); -+ reg &= ~GLOBAL_INT_MASK_HC; -+ __raw_writel(reg, hcd->regs + GLOBAL_ICR); -+} -+ -+/* change to host role */ -+static void fotg2xx_otgc_role_change(struct usb_hcd *hcd) -+{ -+ -+ /* clear A_SET_B_HNP_EN */ -+ otg_clear(0x80, BIT(6)); -+ -+ /*** Enable VBUS driving */ -+ if (readl(hcd->regs + 0x80) & BIT(19)) -+ printk(KERN_INFO "VBUS already enabled\n"); -+ else { -+ int cnt = 0; -+ -+ /* clear A_BUS_DROP */ -+ otg_clear(0x80, BIT(5)); -+ -+ /* set A_BUS_REQ */ -+ otg_set(0x80, BIT(4)); -+ -+ /* set global bus reg to VBUS on */ -+ writel(readl(IO_ADDRESS(0x40000000) + 0x30) | ((BIT(21)|BIT(22))), -+ IO_ADDRESS(0x40000000) + 0x30); -+ -+ if (readl(hcd->regs + 0x80) & (1<<19)) { -+ printk(KERN_INFO "Waiting for VBus"); -+ while (!(readl(hcd->regs + 0x80) & (1<<19)) && (cnt < 80)) { -+ printk(KERN_CONT "."); -+ cnt++; -+ } -+ printk(KERN_CONT "\n"); -+ } else -+ printk(KERN_INFO "VBUS enabled.\n"); -+ -+ mdelay(1); -+ } -+ fotg2xx_otgh_open(hcd); -+} -+ -+static int fotg2xx_ehci_hc_reset(struct usb_hcd *hcd) -+{ -+ int result; -+ struct ehci_hcd *ehci = hcd_to_ehci(hcd); -+ -+ ehci->caps = hcd->regs; -+ ehci->regs = hcd->regs + HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase)); -+ -+ dbg_hcs_params(ehci, "reset"); -+ dbg_hcc_params(ehci, "reset"); -+ -+ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); -+ hcd->has_tt = 1; -+ -+ result = ehci_halt(ehci); -+ if (result) -+ return result; -+ -+ return ehci_init(hcd); -+} -+ -+/* -+ * Name: OTGC_INT_ISR -+ * Description:This interrupt service routine belongs to the OTG-Controller -+ * <1>.Check for ID_Change -+ * <2>.Check for RL_Change -+ * <3>.Error Detect -+ * Input: wINTStatus -+ * Output:void -+ */ -+void fotg2xx_int_isr(struct usb_hcd *hcd, u32 wINTStatus) -+{ -+ /* <1>.Check for ID_Change */ -+ if (wINTStatus&OTGC_INT_IDCHG) { -+ if ((readl(hcd->regs + 0x80) & BIT(21)) != 0) -+ fotg2xx_otgc_init(hcd); /* Change to B Type */ -+ else -+ fotg2xx_otgc_init(hcd); /* Change to A Type */ -+ -+ return; -+ } -+ -+ /* <2>.Check for RL_Change */ -+ if (wINTStatus&OTGC_INT_RLCHG) -+ fotg2xx_otgc_role_change(hcd); -+ -+ /* <3>.Error Detect */ -+ if (wINTStatus&OTGC_INT_AVBUSERR) -+ printk(KERN_ERR "VBus error!\n"); -+ -+ if (wINTStatus&OTGC_INT_OVC) -+ printk(KERN_WARNING "Overcurrent detected!\n"); -+ -+ /* <3>.Check for Type-A/Type-B Interrupt */ -+ if ((readl(hcd->regs + 0x80) & BIT(21)) == 0) { /*For Type-A Interrupt*/ -+ if (wINTStatus & (OTGC_INT_A_TYPE | OTGC_INT_ASRPDET)) { -+ /* <1>.SRP detected => then set global variable */ -+ printk(KERN_WARNING "SRP detected, but not implemented!\n"); -+ -+#if 0 -+ u32 wTempCounter; -+ /* <2>.Turn on the V Bus */ -+ pFTC_OTG->otg.state = OTG_STATE_A_WAIT_VRISE; -+ OTGC_enable_vbus_draw_storlink(1); -+ pFTC_OTG->otg.state = OTG_STATE_A_HOST; -+ /* <3>.Should waiting for Device-Connect Wait 300ms */ -+ INFO(pFTC_OTG, ">>> OTG-A Waiting for OTG-B Connect,\n"); -+ wTempCounter = 0; -+ while (mwHost20_PORTSC_ConnectStatus_Rd() == 0) { -+ mdelay(1); -+ wTempCounter++; -+ /* Waiting for 300 ms */ -+ if (wTempCounter > 300) { -+ mdwOTGC_Control_A_SRP_DET_EN_Clr(); -+ INFO(pFTC_OTG, ">>> OTG-B do not connect under 300 ms...\n"); -+ break; -+ } -+ } -+ /* <4>.If Connect => issue quick Reset */ -+ if (mwHost20_PORTSC_ConnectStatus_Rd() > 0) { -+ mdelay(300); /* For OPT-A Test */ -+ OTGH_host_quick_Reset(); -+ OTGH_Open(); -+ pFTC_OTG->otg.host->A_Disable_Set_Feature_HNP = 0; -+ } -+#endif -+ } -+ } else { /* For Type-B Interrupt */ -+ BUG(); -+ } -+} -+ -+static irqreturn_t fotg2xx_ehci_irq(int irq, void *devid) -+{ -+ struct usb_hcd *hcd = devid; -+ u32 val; -+ -+ /* OTG Interrupt Status Register */ -+ val = readl(hcd->regs + 0x84); -+ -+ /* OTG stuff */ -+ if (val) { -+ /* supposed to do "INT STS Clr" - XXX */ -+ writel(readl(hcd->regs + 0x84) | val, hcd->regs + 0x84); -+ -+ fotg2xx_int_isr(hcd, val); -+ -+ /* supposed to do "INT STS Clr" - XXX */ -+ writel(readl(hcd->regs + 0x84) | val, hcd->regs + 0x84); -+ -+ return IRQ_HANDLED; -+ } -+ -+ if ((readl(hcd->regs + 0x80) & BIT(20)) == 0) { /* Role is HOST */ -+ if (readl(hcd->regs + 0xC0) & BIT(2)) { /* INT STS HOST */ -+ /* leave this for ehci irq handler */ -+ return IRQ_NONE; -+ } -+ } else -+ printk(KERN_WARNING -+ "received irq for peripheral - don't know what to do!\n"); -+ -+ /* do not call the ehci irq handler */ -+ return IRQ_HANDLED; -+} -+ -+static int fotg2xx_ehci_run(struct usb_hcd *hcd) -+{ -+ int retval; -+ -+ retval = ehci_run(hcd); -+ -+ fotg2xx_otgh_close(hcd); -+ fotg2xx_otgc_init(hcd); -+ -+ return retval; -+} -+ -+static const struct hc_driver fotg2xx_ehci_hc_driver = { -+ .description = hcd_name, -+ .product_desc = "FOTG2XX EHCI Host Controller", -+ .hcd_priv_size = sizeof(struct ehci_hcd), -+ .irq = ehci_irq, -+ .flags = HCD_MEMORY | HCD_USB2, -+ .reset = fotg2xx_ehci_hc_reset, -+ .start = fotg2xx_ehci_run, -+ .stop = ehci_stop, -+ .shutdown = ehci_shutdown, -+ -+ .urb_enqueue = ehci_urb_enqueue, -+ .urb_dequeue = ehci_urb_dequeue, -+ .endpoint_disable = ehci_endpoint_disable, -+ .endpoint_reset = ehci_endpoint_reset, -+ -+ .get_frame_number = ehci_get_frame, -+ -+ .hub_status_data = ehci_hub_status_data, -+ .hub_control = ehci_hub_control, -+#if defined(CONFIG_PM) -+ .bus_suspend = ehci_bus_suspend, -+ .bus_resume = ehci_bus_resume, -+#endif -+ .relinquish_port = ehci_relinquish_port, -+ .port_handed_over = ehci_port_handed_over, -+ -+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, -+}; -+ -+static int fotg2xx_ehci_probe(struct platform_device *pdev) -+{ -+ const struct hc_driver *driver = &fotg2xx_ehci_hc_driver; -+ struct usb_hcd *hcd; -+ struct resource *res; -+ int irq; -+ int retval; -+ -+ pr_debug("initializing FOTG2XX-SOC USB Controller\n"); -+ -+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); -+ if (!res) { -+ dev_err(&pdev->dev, -+ "Found HC with no IRQ. Check %s setup!\n", -+ dev_name(&pdev->dev)); -+ return -ENODEV; -+ } -+ -+ irq = res->start; -+ -+ hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); -+ if (!hcd) { -+ retval = -ENOMEM; -+ goto err1; -+ } -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!res) { -+ dev_err(&pdev->dev, -+ "Found HC with no register addr. Check %s setup!\n", -+ dev_name(&pdev->dev)); -+ retval = -ENODEV; -+ goto err2; -+ } -+ -+ hcd->rsrc_start = res->start; -+ hcd->rsrc_len = res->end - res->start + 1; -+ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, -+ driver->description)) { -+ dev_dbg(&pdev->dev, "controller already in use\n"); -+ retval = -EBUSY; -+ goto err2; -+ } -+ -+ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); -+ if (hcd->regs == NULL) { -+ dev_dbg(&pdev->dev, "error mapping memory\n"); -+ retval = -EFAULT; -+ goto err3; -+ } -+ -+ -+ /* set global reg to mini-A host */ -+ writel(readl(IO_ADDRESS(0x40000000) + 0x30) & ~(BIT(30)|BIT(29)), -+ IO_ADDRESS(0x40000000) + 0x30); -+ -+ /* USB0&USB1 - VBUS off */ -+ writel(readl(IO_ADDRESS(0x40000000) + 0x30) & ~(BIT(21)|BIT(22)), -+ IO_ADDRESS(0x40000000) + 0x30); -+ -+ if ((readl(hcd->regs) == 0x01000010) && -+ (readl(hcd->regs + 4) == 0x00000001) && -+ (readl(hcd->regs + 8) == 0x00000006)) { -+ dev_info(&pdev->dev, -+ "Found Faraday OTG 2XX controller (base = 0x%08lX)\n", -+ (unsigned long) hcd->rsrc_start); -+ } else { -+ dev_err(&pdev->dev, "fotg2xx id mismatch: found %d.%d.%d\n", -+ readl(hcd->regs + 0x00), -+ readl(hcd->regs + 0x04), -+ readl(hcd->regs + 0x08)); -+ retval = -ENODEV; -+ goto err4; -+ } -+ -+ platform_set_drvdata(pdev, hcd); -+ -+ /* mask interrupts - peripheral, otg, host, hi-active (bits 0,1,2,3) */ -+ otg_set(0xc4, BIT(3)); /* hi active */ -+ -+ otg_set(0xc4, BIT(2)); /* host */ -+ otg_set(0xc4, BIT(1)); /* otg */ -+ otg_set(0xc4, BIT(0)); /* peripheral */ -+ -+ /* register additional interrupt - here we check otg status */ -+ if ((request_irq(irq, &fotg2xx_ehci_irq, IRQF_SHARED | IRQF_DISABLED, -+ hcd->irq_descr, hcd)) != 0) { -+ dev_dbg(&pdev->dev, "error requesting irq %d\n", irq); -+ retval = -EFAULT; -+ goto err4; -+ } -+ -+ retval = usb_add_hcd(hcd, irq, IRQF_SHARED); -+ if (retval != 0) -+ goto err4; -+ return retval; -+ -+err4: -+ iounmap(hcd->regs); -+err3: -+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len); -+err2: -+ usb_put_hcd(hcd); -+err1: -+ dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev), retval); -+ return retval; -+} -+ -+/* may be called without controller electrically present */ -+/* may be called with controller, bus, and devices active */ -+ -+int fotg2xx_ehci_remove(struct platform_device *pdev) -+{ -+ struct usb_hcd *hcd = -+ (struct usb_hcd *)platform_get_drvdata(pdev); -+ -+ usb_remove_hcd(hcd); -+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len); -+ iounmap(hcd->regs); -+ usb_put_hcd(hcd); -+ platform_set_drvdata(pdev, NULL); -+ -+ return 0; -+} -+ -+MODULE_ALIAS("platform:ehci-fotg2xx"); -+ -+static struct platform_driver fotg2xx_ehci_driver = { -+ .probe = fotg2xx_ehci_probe, -+ .remove = fotg2xx_ehci_remove, -+ .driver = { -+ .name = "ehci-fotg2xx", -+ }, -+}; ---- a/drivers/usb/host/ehci.h -+++ b/drivers/usb/host/ehci.h -@@ -603,7 +603,12 @@ static inline unsigned int - ehci_port_speed(struct ehci_hcd *ehci, unsigned int portsc) - { - if (ehci_is_TDI(ehci)) { -+#ifdef CONFIG_ARCH_GEMINI -+ portsc = readl(ehci_to_hcd(ehci)->regs + 0x80); -+ switch ((portsc>>22)&3) { -+#else - switch ((portsc >> (ehci->has_hostpc ? 25 : 26)) & 3) { -+#endif - case 0: - return 0; - case 1: ---- a/drivers/usb/host/ehci-hcd.c -+++ b/drivers/usb/host/ehci-hcd.c -@@ -204,10 +204,12 @@ static int ehci_halt (struct ehci_hcd *e - * This routine gets called during probe before ehci->command - * has been initialized, so we can't rely on its value. - */ -+#ifndef CONFIG_ARCH_GEMINI - ehci->command &= ~CMD_RUN; - temp = ehci_readl(ehci, &ehci->regs->command); - temp &= ~(CMD_RUN | CMD_IAAD); - ehci_writel(ehci, temp, &ehci->regs->command); -+#endif - - spin_unlock_irq(&ehci->lock); - synchronize_irq(ehci_to_hcd(ehci)->irq); -@@ -257,13 +259,17 @@ static int ehci_reset (struct ehci_hcd * - if (ehci->has_hostpc) { - ehci_writel(ehci, USBMODE_EX_HC | USBMODE_EX_VBPS, - &ehci->regs->usbmode_ex); -+#ifndef CONFIG_ARCH_GEMINI - ehci_writel(ehci, TXFIFO_DEFAULT, &ehci->regs->txfill_tuning); -+#endif - } - if (retval) - return retval; - -+#ifndef CONFIG_ARCH_GEMINI - if (ehci_is_TDI(ehci)) - tdi_reset (ehci); -+#endif - - if (ehci->debug) - dbgp_external_startup(ehci_to_hcd(ehci)); -@@ -341,11 +347,14 @@ static void ehci_silence_controller(stru - ehci->rh_state = EHCI_RH_HALTED; - ehci_turn_off_all_ports(ehci); - -+#ifndef CONFIG_ARCH_GEMINI - /* make BIOS/etc use companion controller during reboot */ - ehci_writel(ehci, 0, &ehci->regs->configured_flag); - - /* unblock posted writes */ - ehci_readl(ehci, &ehci->regs->configured_flag); -+#endif -+ - spin_unlock_irq(&ehci->lock); - } - -@@ -603,7 +612,9 @@ static int ehci_run (struct usb_hcd *hcd - // Philips, Intel, and maybe others need CMD_RUN before the - // root hub will detect new devices (why?); NEC doesn't - ehci->command &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET); -+#ifndef CONFIG_ARCH_GEMINI - ehci->command |= CMD_RUN; -+#endif - ehci_writel(ehci, ehci->command, &ehci->regs->command); - dbg_cmd (ehci, "init", ehci->command); - -@@ -623,9 +634,11 @@ static int ehci_run (struct usb_hcd *hcd - */ - down_write(&ehci_cf_port_reset_rwsem); - ehci->rh_state = EHCI_RH_RUNNING; -+#ifndef CONFIG_ARCH_GEMINI - ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag); - ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */ - msleep(5); -+#endif /* !CONFIG_ARCH_GEMINI */ - up_write(&ehci_cf_port_reset_rwsem); - ehci->last_periodic_enable = ktime_get_real(); - -@@ -1228,6 +1241,11 @@ MODULE_DESCRIPTION(DRIVER_DESC); - MODULE_AUTHOR (DRIVER_AUTHOR); - MODULE_LICENSE ("GPL"); - -+#ifdef CONFIG_ARCH_GEMINI -+#include "ehci-fotg2xx.c" -+#define PLATFORM_DRIVER fotg2xx_ehci_driver -+#endif -+ - #ifdef CONFIG_USB_EHCI_FSL - #include "ehci-fsl.c" - #define PLATFORM_DRIVER ehci_fsl_driver ---- a/drivers/usb/host/ehci-hub.c -+++ b/drivers/usb/host/ehci-hub.c -@@ -914,6 +914,12 @@ static int ehci_hub_control ( - /* see what we found out */ - temp = check_reset_complete (ehci, wIndex, status_reg, - ehci_readl(ehci, status_reg)); -+#ifdef CONFIG_ARCH_GEMINI -+ /* restart schedule */ -+ ehci_writel(ehci, ehci_readl(ehci, &ehci->regs->command) | CMD_RUN, &ehci->regs->command); -+ -+// hcd->state = HC_STATE_RUNNING; -+#endif - } - - if (!(temp & (PORT_RESUME|PORT_RESET))) { ---- a/drivers/usb/Kconfig -+++ b/drivers/usb/Kconfig -@@ -47,6 +47,7 @@ config USB_ARCH_HAS_EHCI - default y if MICROBLAZE - default y if SPARC_LEON - default y if ARCH_MMP -+ default y if ARCH_GEMINI - default y if MACH_LOONGSON1 - default y if PLAT_ORION - default PCI -@@ -96,7 +97,7 @@ config USB - traditional PC serial port. The bus supplies power to peripherals - and allows for hot swapping. Up to 127 USB peripherals can be - connected to a single USB host in a tree structure. -- -+ - The USB host is the root of the tree, the peripherals are the - leaves and the inner nodes are special USB devices called hubs. - Most PCs now have USB host ports, used to connect peripherals ---- a/include/linux/usb/ehci_def.h -+++ b/include/linux/usb/ehci_def.h -@@ -111,6 +111,7 @@ struct ehci_regs { - /* ASYNCLISTADDR: offset 0x18 */ - u32 async_next; /* address of next async queue head */ - -+#ifndef CONFIG_ARCH_GEMINI - u32 reserved1[2]; - - /* TXFILLTUNING: offset 0x24 */ -@@ -118,6 +119,7 @@ struct ehci_regs { - #define TXFIFO_DEFAULT (8<<16) /* FIFO burst threshold 8 */ - - u32 reserved2[6]; -+#endif /* !CONFIG_ARCH_GEMINI */ - - /* CONFIGFLAG: offset 0x40 */ - u32 configured_flag; diff --git a/target/linux/gemini/patches-3.10/131-arm-gemini-add-usb-platform-device.patch b/target/linux/gemini/patches-3.10/131-arm-gemini-add-usb-platform-device.patch deleted file mode 100644 index d1a4fee508..0000000000 --- a/target/linux/gemini/patches-3.10/131-arm-gemini-add-usb-platform-device.patch +++ /dev/null @@ -1,75 +0,0 @@ ---- a/arch/arm/mach-gemini/devices.c -+++ b/arch/arm/mach-gemini/devices.c -@@ -185,3 +185,62 @@ int __init platform_register_ethernet(st - - return platform_device_register(ðernet_device); - } -+ -+static u64 usb0_dmamask = DMA_BIT_MASK(32); -+static struct resource usb0_resources[] = { -+ { -+ .start = 0x68000000, -+ .end = 0x68000fff, -+ .flags = IORESOURCE_MEM, -+ }, -+ { -+ .start = IRQ_USB0, -+ .end = IRQ_USB0, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static u64 usb1_dmamask = DMA_BIT_MASK(32); -+static struct resource usb1_resources[] = { -+ { -+ .start = 0x69000000, -+ .end = 0x69000fff, -+ .flags = IORESOURCE_MEM, -+ }, -+ { -+ .start = IRQ_USB1, -+ .end = IRQ_USB1, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct platform_device usb_device[] = { -+ { -+ .name = "ehci-fotg2xx", -+ .id = 0, -+ .dev = { -+ .dma_mask = &usb0_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ }, -+ .num_resources = ARRAY_SIZE(usb0_resources), -+ .resource = usb0_resources, -+ }, -+ { -+ .name = "ehci-fotg2xx", -+ .id = 1, -+ .dev = { -+ .dma_mask = &usb1_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ }, -+ .num_resources = ARRAY_SIZE(usb1_resources), -+ .resource = usb1_resources, -+ }, -+}; -+ -+int __init platform_register_usb(unsigned int id) -+{ -+ if (id > 1) -+ return -EINVAL; -+ -+ return platform_device_register(&usb_device[id]); -+} ---- a/arch/arm/mach-gemini/common.h -+++ b/arch/arm/mach-gemini/common.h -@@ -28,6 +28,7 @@ extern int platform_register_pflash(unsi - unsigned int nr_parts); - extern int platform_register_watchdog(void); - extern int platform_register_ethernet(struct gemini_gmac_platform_data *pdata); -+extern int platform_register_usb(unsigned int id); - - extern void gemini_restart(char mode, const char *cmd); - diff --git a/target/linux/gemini/patches-3.10/132-arm-gemini-register-usb.patch b/target/linux/gemini/patches-3.10/132-arm-gemini-register-usb.patch new file mode 100644 index 0000000000..87a063cbe2 --- /dev/null +++ b/target/linux/gemini/patches-3.10/132-arm-gemini-register-usb.patch @@ -0,0 +1,65 @@ +--- a/arch/arm/mach-gemini/board-wbd111.c ++++ b/arch/arm/mach-gemini/board-wbd111.c +@@ -145,6 +145,7 @@ static void __init wbd111_init(void) + platform_register_watchdog(); + platform_device_register(&wbd111_phy_device); + platform_register_ethernet(&gmac_data); ++ platform_register_usb(0); + } + + MACHINE_START(WBD111, "Wiliboard WBD-111") +--- a/arch/arm/mach-gemini/board-wbd222.c ++++ b/arch/arm/mach-gemini/board-wbd222.c +@@ -147,6 +147,7 @@ static void __init wbd222_init(void) + platform_register_watchdog(); + platform_device_register(&wbd222_phy_device); + platform_register_ethernet(&gmac_data); ++ platform_register_usb(0); + } + + MACHINE_START(WBD222, "Wiliboard WBD-222") +--- a/arch/arm/mach-gemini/board-rut1xx.c ++++ b/arch/arm/mach-gemini/board-rut1xx.c +@@ -105,6 +105,7 @@ static void __init rut1xx_init(void) + platform_register_watchdog(); + platform_device_register(&rut1xx_phy_device); + platform_register_ethernet(&gmac_data); ++ platform_register_usb(0); + } + + MACHINE_START(RUT100, "Teltonika RUT100") +--- a/arch/arm/mach-gemini/board-nas4220b.c ++++ b/arch/arm/mach-gemini/board-nas4220b.c +@@ -134,10 +134,23 @@ + GLOBAL_ARBITRATION1_CTRL)); + } + ++static void __init usb_ib4220b_init(void) ++{ ++ unsigned int val; ++ ++ val = readl((void __iomem*)(IO_ADDRESS(GEMINI_GLOBAL_BASE) + ++ GLOBAL_MISC_CTRL)); ++ val &= ~(USB0_PLUG_MINIB | USB1_PLUG_MINIB); ++ val |= USB0_VBUS_ON | USB1_VBUS_ON; ++ writel(val, (void __iomem*)(IO_ADDRESS(GEMINI_GLOBAL_BASE) + ++ GLOBAL_MISC_CTRL)); ++} ++ + static void __init ib4220b_init(void) + { + gemini_gpio_init(); + ib4220b_gmac_init(); ++ usb_ib4220b_init(); + platform_register_uart(); + platform_register_pflash(SZ_16M, NULL, 0); + platform_device_register(&ib4220b_led_device); +@@ -168,6 +168,8 @@ static void __init ib4220b_init(void) + platform_register_watchdog(); + platform_device_register(&ib4220b_phy_device); + platform_register_ethernet(&ib4220b_gmac_data); ++ platform_register_usb(0); ++ platform_register_usb(1); + } + + MACHINE_START(NAS4220B, "Raidsonic NAS IB-4220-B") diff --git a/target/linux/gemini/patches-3.10/132-arm-gemini-wbd111-register-usb.patch b/target/linux/gemini/patches-3.10/132-arm-gemini-wbd111-register-usb.patch deleted file mode 100644 index 44e72d17c3..0000000000 --- a/target/linux/gemini/patches-3.10/132-arm-gemini-wbd111-register-usb.patch +++ /dev/null @@ -1,24 +0,0 @@ ---- a/arch/arm/mach-gemini/board-wbd111.c -+++ b/arch/arm/mach-gemini/board-wbd111.c -@@ -145,6 +145,7 @@ static void __init wbd111_init(void) - platform_register_watchdog(); - platform_device_register(&wbd111_phy_device); - platform_register_ethernet(&gmac_data); -+ platform_register_usb(0); - } - - MACHINE_START(WBD111, "Wiliboard WBD-111") ---- a/drivers/usb/host/ehci-hcd.c -+++ b/drivers/usb/host/ehci-hcd.c -@@ -99,7 +99,11 @@ module_param (park, uint, S_IRUGO); - MODULE_PARM_DESC (park, "park setting; 1-3 back-to-back async packets"); - - /* for flakey hardware, ignore overcurrent indicators */ -+#ifdef CONFIG_ARCH_GEMINI -+static bool ignore_oc = 1; -+#else - static bool ignore_oc = 0; -+#endif - module_param (ignore_oc, bool, S_IRUGO); - MODULE_PARM_DESC (ignore_oc, "ignore bogus hardware overcurrent indications"); - diff --git a/target/linux/gemini/patches-3.10/133-arm-gemini-wbd222-register-usb.patch b/target/linux/gemini/patches-3.10/133-arm-gemini-wbd222-register-usb.patch deleted file mode 100644 index 2adc410926..0000000000 --- a/target/linux/gemini/patches-3.10/133-arm-gemini-wbd222-register-usb.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/arm/mach-gemini/board-wbd222.c -+++ b/arch/arm/mach-gemini/board-wbd222.c -@@ -147,6 +147,7 @@ static void __init wbd222_init(void) - platform_register_watchdog(); - platform_device_register(&wbd222_phy_device); - platform_register_ethernet(&gmac_data); -+ platform_register_usb(0); - } - - MACHINE_START(WBD222, "Wiliboard WBD-222") diff --git a/target/linux/gemini/patches-3.10/134-arm-gemini-rut100-register-usb.patch b/target/linux/gemini/patches-3.10/134-arm-gemini-rut100-register-usb.patch deleted file mode 100644 index c3755ee7d4..0000000000 --- a/target/linux/gemini/patches-3.10/134-arm-gemini-rut100-register-usb.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/arm/mach-gemini/board-rut1xx.c -+++ b/arch/arm/mach-gemini/board-rut1xx.c -@@ -105,6 +105,7 @@ static void __init rut1xx_init(void) - platform_register_watchdog(); - platform_device_register(&rut1xx_phy_device); - platform_register_ethernet(&gmac_data); -+ platform_register_usb(0); - } - - MACHINE_START(RUT100, "Teltonika RUT100") diff --git a/target/linux/gemini/patches-3.10/135-arm-gemini-nas4220-register-usb.patch b/target/linux/gemini/patches-3.10/135-arm-gemini-nas4220-register-usb.patch deleted file mode 100644 index 078c6c2f55..0000000000 --- a/target/linux/gemini/patches-3.10/135-arm-gemini-nas4220-register-usb.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/arch/arm/mach-gemini/board-nas4220b.c -+++ b/arch/arm/mach-gemini/board-nas4220b.c -@@ -146,6 +146,8 @@ static void __init ib4220b_init(void) - platform_register_watchdog(); - platform_device_register(&ib4220b_phy_device); - platform_register_ethernet(&ib4220b_gmac_data); -+ platform_register_usb(0); -+ platform_register_usb(1); - } - - MACHINE_START(NAS4220B, "Raidsonic NAS IB-4220-B")