diff --git a/target/linux/au1000/Makefile b/target/linux/au1000/Makefile index 8781f76850..9800b793cf 100644 --- a/target/linux/au1000/Makefile +++ b/target/linux/au1000/Makefile @@ -12,7 +12,7 @@ BOARDNAME:=RMI/AMD AU1x00 FEATURES:=jffs2 usb pci SUBTARGETS=au1500 au1550 -LINUX_VERSION:=2.6.27.22 +LINUX_VERSION:=2.6.28.10 include $(INCLUDE_DIR)/target.mk DEFAULT_PACKAGES += hostapd-mini yamonenv diff --git a/target/linux/au1000/au1500/config-2.6.27 b/target/linux/au1000/au1500/config-default similarity index 80% rename from target/linux/au1000/au1500/config-2.6.27 rename to target/linux/au1000/au1500/config-default index 24e6856e07..5a27eda41f 100644 --- a/target/linux/au1000/au1500/config-2.6.27 +++ b/target/linux/au1000/au1500/config-default @@ -5,15 +5,14 @@ CONFIG_64BIT_PHYS_ADDR=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y -# CONFIG_ATM is not set CONFIG_BASE_SMALL=0 # CONFIG_BCM47XX is not set CONFIG_BITREVERSE=y CONFIG_CEVT_R4K=y -CONFIG_CHR_DEV_SG=m CONFIG_CLASSIC_RCU=y CONFIG_CMDLINE="root=/dev/mtdblock0 rootfstype=squashfs,jffs2 init=/etc/preinit" # CONFIG_CPU_BIG_ENDIAN is not set @@ -35,6 +34,7 @@ CONFIG_CPU_MIPSR1=y # CONFIG_CPU_R4X00 is not set # CONFIG_CPU_R5000 is not set # CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R5500 is not set # CONFIG_CPU_R6000 is not set # CONFIG_CPU_R8000 is not set # CONFIG_CPU_RM7000 is not set @@ -55,30 +55,24 @@ CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_DMA_NONCOHERENT=y CONFIG_DUMMY=m CONFIG_ELF_CORE=y -CONFIG_FS_POSIX_ACL=y +# CONFIG_FREEZER is not set CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_GENERIC_CMOS_UPDATE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_GPIO=y # CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set +CONFIG_GPIOLIB=y # CONFIG_HAMRADIO is not set +CONFIG_HARDWARE_WATCHPOINTS=y CONFIG_HAS_DMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +# CONFIG_HAVE_AOUT is not set CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_CLK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_HAVE_IDE=y -# CONFIG_HAVE_IOREMAP_PROT is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set CONFIG_HAVE_OPROFILE=y -CONFIG_HID=m -CONFIG_HID_SUPPORT=y CONFIG_HW_HAS_PCI=y CONFIG_HW_RANDOM=y CONFIG_HZ=250 @@ -90,39 +84,25 @@ CONFIG_I2C_ALGOPCA=m CONFIG_I2C_ALGOPCF=m CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=m +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IDE is not set CONFIG_INITRAMFS_SOURCE="" CONFIG_IRQ_CPU=y CONFIG_KEXEC=y -# CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_GPIO=y -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set CONFIG_KMOD=y +# CONFIG_LEDS_GPIO is not set # CONFIG_LEDS_TRIGGERS is not set # CONFIG_LEMOTE_FULONG is not set CONFIG_MACH_ALCHEMY=y # CONFIG_MACH_DECSTATION is not set +# CONFIG_MACH_EMMA is not set # CONFIG_MACH_JAZZ is not set # CONFIG_MACH_TX39XX is not set # CONFIG_MACH_TX49XX is not set # CONFIG_MACH_VR41XX is not set CONFIG_MAGIC_SYSRQ=y -# CONFIG_MDIO_BITBANG is not set -CONFIG_MEDIA_TUNER=m -CONFIG_MEDIA_TUNER_MT20XX=m -CONFIG_MEDIA_TUNER_SIMPLE=m -CONFIG_MEDIA_TUNER_TDA8290=m -CONFIG_MEDIA_TUNER_TDA9887=m -CONFIG_MEDIA_TUNER_TEA5761=m -CONFIG_MEDIA_TUNER_TEA5767=m -CONFIG_MEDIA_TUNER_XC2028=m -CONFIG_MEDIA_TUNER_XC5000=m -# CONFIG_MFD_CORE is not set -# CONFIG_MFD_TMIO is not set # CONFIG_MIKROTIK_RB532 is not set CONFIG_MIPS=y CONFIG_MIPS_AU1X00_ENET=y @@ -158,8 +138,10 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 CONFIG_MTD_PHYSMAP_LEN=0 CONFIG_MTD_PHYSMAP_START=0x8000000 # CONFIG_NATSEMI is not set -# CONFIG_NET_SCH_ESFQ_NFCT is not set +# CONFIG_NF_DEFRAG_IPV4 is not set # CONFIG_NO_IOPORT is not set +# CONFIG_NXP_STB220 is not set +# CONFIG_NXP_STB225 is not set CONFIG_PAGEFLAGS_EXTENDED=y # CONFIG_PAGE_SIZE_16KB is not set CONFIG_PAGE_SIZE_4KB=y @@ -169,18 +151,18 @@ CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCSPKR_PLATFORM=y CONFIG_PHYLIB=y +# CONFIG_PHYS_ADDR_T_64BIT is not set # CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set -# CONFIG_PPP_MPPE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set # CONFIG_PROBE_INITRD_HEADER is not set +# CONFIG_PROM_EMU is not set # CONFIG_R6040 is not set CONFIG_RESOURCES_64BIT=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_SCSI_CONSTANTS=y -# CONFIG_SCSI_PROC_FS is not set +# CONFIG_SCSI_DMA is not set CONFIG_SERIAL_8250_AU1X00=y # CONFIG_SERIAL_8250_EXTENDED is not set CONFIG_SERIAL_8250_NR_UARTS=4 @@ -209,14 +191,9 @@ CONFIG_SYS_SUPPORTS_ARBIT_HZ=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y # CONFIG_TC35815 is not set CONFIG_TICK_ONESHOT=y -# CONFIG_TMD_HERMES is not set CONFIG_TRAD_SIGNALS=y CONFIG_USB_SUPPORT=y # CONFIG_VGASTATE is not set # CONFIG_VIA_RHINE is not set -CONFIG_VIDEO_CAPTURE_DRIVERS=y -CONFIG_VIDEO_MEDIA=m -CONFIG_VIDEO_V4L2=m -CONFIG_VIDEO_V4L2_COMMON=m CONFIG_WDT_MTX1=y CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/au1000/au1550/config-2.6.27 b/target/linux/au1000/au1550/config-default similarity index 100% rename from target/linux/au1000/au1550/config-2.6.27 rename to target/linux/au1000/au1550/config-default diff --git a/target/linux/au1000/patches-2.6.28/001-mtx1_cmdline.patch b/target/linux/au1000/patches-2.6.28/001-mtx1_cmdline.patch new file mode 100644 index 0000000000..a45832765c --- /dev/null +++ b/target/linux/au1000/patches-2.6.28/001-mtx1_cmdline.patch @@ -0,0 +1,11 @@ +--- a/arch/mips/alchemy/mtx-1/init.c ++++ b/arch/mips/alchemy/mtx-1/init.c +@@ -49,7 +49,7 @@ void __init prom_init(void) + prom_argv = (char **)fw_arg1; + prom_envp = (char **)fw_arg2; + +- prom_init_cmdline(); ++ strcpy(arcs_cmdline, CONFIG_CMDLINE); + + memsize_str = prom_getenv("memsize"); + if (!memsize_str) diff --git a/target/linux/au1000/patches-2.6.28/002-openwrt_rootfs.patch b/target/linux/au1000/patches-2.6.28/002-openwrt_rootfs.patch new file mode 100644 index 0000000000..e1056e93d9 --- /dev/null +++ b/target/linux/au1000/patches-2.6.28/002-openwrt_rootfs.patch @@ -0,0 +1,11 @@ +--- a/arch/mips/alchemy/mtx-1/platform.c ++++ b/arch/mips/alchemy/mtx-1/platform.c +@@ -90,7 +90,7 @@ static struct platform_device mtx1_gpio_ + + static struct mtd_partition mtx1_mtd_partitions[] = { + { +- .name = "filesystem", ++ .name = "rootfs", + .size = 0x01C00000, + .offset = 0, + }, diff --git a/target/linux/au1000/patches-2.6.28/003-au1000_eth_ioctl.patch b/target/linux/au1000/patches-2.6.28/003-au1000_eth_ioctl.patch new file mode 100644 index 0000000000..4b152f3aad --- /dev/null +++ b/target/linux/au1000/patches-2.6.28/003-au1000_eth_ioctl.patch @@ -0,0 +1,15 @@ +--- a/drivers/net/au1000_eth.c ++++ b/drivers/net/au1000_eth.c +@@ -1293,9 +1293,12 @@ static void set_rx_mode(struct net_devic + } + } + ++#define AU1000_KNOWN_PHY_IOCTLS (SIOCGMIIPHY & 0xfff0) + static int au1000_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) + { + struct au1000_private *aup = (struct au1000_private *)dev->priv; ++ if((cmd & AU1000_KNOWN_PHY_IOCTLS) != AU1000_KNOWN_PHY_IOCTLS) ++ return -EINVAL; + + if (!netif_running(dev)) return -EINVAL; + diff --git a/target/linux/au1000/patches-2.6.28/004-state_led_phy_fix.patch b/target/linux/au1000/patches-2.6.28/004-state_led_phy_fix.patch new file mode 100644 index 0000000000..e681970c5b --- /dev/null +++ b/target/linux/au1000/patches-2.6.28/004-state_led_phy_fix.patch @@ -0,0 +1,31 @@ +--- a/drivers/net/au1000_eth.c ++++ b/drivers/net/au1000_eth.c +@@ -184,6 +184,15 @@ struct au1000_private *au_macs[NUM_ETH_I + # undef AU1XXX_PHY1_IRQ + #endif + ++#if defined(CONFIG_MIPS_MTX1) ++/* ++ * 4G MeshCube (MTX-1) board ++ * PHY is at address 31 on MAC0 ++ * autodetect fails if not searched for highest address ! ++ */ ++# define AU1XXX_PHY_SEARCH_HIGHEST_ADDR ++#endif ++ + #if defined(AU1XXX_PHY0_BUSID) && (AU1XXX_PHY0_BUSID > 0) + # error MAC0-associated PHY attached 2nd MACs MII bus not supported yet + #endif +@@ -380,6 +389,12 @@ static int mii_probe (struct net_device + aup->old_duplex = -1; + aup->phy_dev = phydev; + ++#ifdef CONFIG_MIPS_MTX1 ++ /* set up ethernet jack LEDs on the 4G MeshCube (MTX-1 board) */ ++ printk(KERN_INFO "MTX-1 PHY: updating LED settings\n"); ++ phy_write(phydev, 0x11, 0xff80); ++#endif ++ + printk(KERN_INFO "%s: attached PHY driver [%s] " + "(mii_bus:phy_addr=%s, irq=%d)\n", + dev->name, phydev->drv->name, phydev->dev.bus_id, phydev->irq); diff --git a/target/linux/au1000/patches-2.6.28/006-missing_string_header.patch b/target/linux/au1000/patches-2.6.28/006-missing_string_header.patch new file mode 100644 index 0000000000..8aba202521 --- /dev/null +++ b/target/linux/au1000/patches-2.6.28/006-missing_string_header.patch @@ -0,0 +1,10 @@ +--- a/arch/mips/alchemy/mtx-1/init.c ++++ b/arch/mips/alchemy/mtx-1/init.c +@@ -32,6 +32,7 @@ + #include + + #include ++#include + + #include + diff --git a/target/linux/au1000/patches-2.6.28/007-gpiolib.patch b/target/linux/au1000/patches-2.6.28/007-gpiolib.patch new file mode 100644 index 0000000000..bd4b5635a8 --- /dev/null +++ b/target/linux/au1000/patches-2.6.28/007-gpiolib.patch @@ -0,0 +1,396 @@ +--- a/arch/mips/alchemy/Kconfig ++++ b/arch/mips/alchemy/Kconfig +@@ -134,3 +134,4 @@ config SOC_AU1X00 + select SYS_HAS_CPU_MIPS32_R1 + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_APM_EMULATION ++ select ARCH_REQUIRE_GPIOLIB +--- a/arch/mips/alchemy/common/gpio.c ++++ b/arch/mips/alchemy/common/gpio.c +@@ -1,5 +1,5 @@ + /* +- * Copyright (C) 2007, OpenWrt.org, Florian Fainelli ++ * Copyright (C) 2007-2008, OpenWrt.org, Florian Fainelli + * Architecture specific GPIO support + * + * This program is free software; you can redistribute it and/or modify it +@@ -27,122 +27,222 @@ + * others have a second one : GPIO2 + */ + ++#include + #include ++#include ++#include ++#include + + #include +-#include ++#include + +-#define gpio1 sys +-#if !defined(CONFIG_SOC_AU1000) ++struct au1000_gpio_chip { ++ struct gpio_chip chip; ++ void __iomem *regbase; ++}; + +-static struct au1x00_gpio2 *const gpio2 = (struct au1x00_gpio2 *) GPIO2_BASE; ++#if !defined(CONFIG_SOC_AU1000) + #define GPIO2_OUTPUT_ENABLE_MASK 0x00010000 + +-static int au1xxx_gpio2_read(unsigned gpio) ++/* ++ * Return GPIO bank 2 level ++ */ ++static int au1000_gpio2_get(struct gpio_chip *chip, unsigned offset) + { +- gpio -= AU1XXX_GPIO_BASE; +- return ((gpio2->pinstate >> gpio) & 0x01); ++ u32 mask = 1 << offset; ++ struct au1000_gpio_chip *gpch; ++ ++ gpch = container_of(chip, struct au1000_gpio_chip, chip); ++ return readl(gpch->regbase + AU1000_GPIO2_ST) & mask; + } + +-static void au1xxx_gpio2_write(unsigned gpio, int value) ++/* ++ * Set output GPIO bank 2 level ++ */ ++static void au1000_gpio2_set(struct gpio_chip *chip, ++ unsigned offset, int value) + { +- gpio -= AU1XXX_GPIO_BASE; +- +- gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | ((!!value) << gpio); ++ u32 mask = (!!value) << offset; ++ struct au1000_gpio_chip *gpch; ++ unsigned long flags; ++ ++ gpch = container_of(chip, struct au1000_gpio_chip, chip); ++ ++ local_irq_save(flags); ++ writel((GPIO2_OUTPUT_ENABLE_MASK << offset) | mask, ++ gpch->regbase + AU1000_GPIO2_OUT); ++ local_irq_restore(flags); + } + +-static int au1xxx_gpio2_direction_input(unsigned gpio) ++/* ++ * Set GPIO bank 2 direction to input ++ */ ++static int au1000_gpio2_direction_input(struct gpio_chip *chip, unsigned offset) + { +- gpio -= AU1XXX_GPIO_BASE; +- gpio2->dir &= ~(0x01 << gpio); ++ unsigned long flags; ++ u32 mask = 1 << offset; ++ u32 value; ++ struct au1000_gpio_chip *gpch; ++ void __iomem *gpdr; ++ ++ gpch = container_of(chip, struct au1000_gpio_chip, chip); ++ gpdr = gpch->regbase + AU1000_GPIO2_DIR; ++ ++ local_irq_save(flags); ++ value = readl(gpdr); ++ value &= ~mask; ++ writel(value, gpdr); ++ local_irq_restore(flags); ++ + return 0; + } + +-static int au1xxx_gpio2_direction_output(unsigned gpio, int value) ++/* ++ * Set GPIO bank2 direction to output ++ */ ++static int au1000_gpio2_direction_output(struct gpio_chip *chip, ++ unsigned offset, int value) + { +- gpio -= AU1XXX_GPIO_BASE; +- gpio2->dir |= 0x01 << gpio; +- gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | ((!!value) << gpio); ++ unsigned long flags; ++ u32 mask = 1 << offset; ++ u32 tmp; ++ struct au1000_gpio_chip *gpch; ++ void __iomem *gpdr; ++ ++ gpch = container_of(chip, struct au1000_gpio_chip, chip); ++ gpdr = gpch->regbase + AU1000_GPIO2_DIR; ++ ++ local_irq_save(flags); ++ tmp = readl(gpdr); ++ tmp |= mask; ++ writel(tmp, gpdr); ++ mask = (!!value) << offset; ++ writel((GPIO2_OUTPUT_ENABLE_MASK << offset) | mask, ++ gpch->regbase + AU1000_GPIO2_OUT); ++ local_irq_restore(flags); ++ + return 0; + } +- + #endif /* !defined(CONFIG_SOC_AU1000) */ + +-static int au1xxx_gpio1_read(unsigned gpio) ++/* ++ * Return GPIO bank 2 level ++ */ ++static int au1000_gpio1_get(struct gpio_chip *chip, unsigned offset) + { +- return (gpio1->pinstaterd >> gpio) & 0x01; ++ u32 mask = 1 << offset; ++ struct au1000_gpio_chip *gpch; ++ ++ gpch = container_of(chip, struct au1000_gpio_chip, chip); ++ return readl(gpch->regbase + 0x0110) & mask; + } + +-static void au1xxx_gpio1_write(unsigned gpio, int value) ++/* ++ * Set GPIO bank 1 level ++ */ ++static void au1000_gpio1_set(struct gpio_chip *chip, ++ unsigned offset, int value) + { ++ unsigned long flags; ++ u32 mask = 1 << offset; ++ struct au1000_gpio_chip *gpch; ++ ++ gpch = container_of(chip, struct au1000_gpio_chip, chip); ++ ++ local_irq_save(flags); + if (value) +- gpio1->outputset = (0x01 << gpio); ++ writel(mask, gpch->regbase + 0x0108); + else +- /* Output a zero */ +- gpio1->outputclr = (0x01 << gpio); ++ writel(mask, gpch->regbase + 0x010C); ++ local_irq_restore(flags); + } + +-static int au1xxx_gpio1_direction_input(unsigned gpio) ++/* ++ * Set GPIO bank 1 direction to input ++ */ ++static int au1000_gpio1_direction_input(struct gpio_chip *chip, unsigned offset) + { +- gpio1->pininputen = (0x01 << gpio); +- return 0; +-} ++ unsigned long flags; ++ u32 mask = 1 << offset; ++ u32 value; ++ struct au1000_gpio_chip *gpch; ++ void __iomem *gpdr; ++ ++ gpch = container_of(chip, struct au1000_gpio_chip, chip); ++ gpdr = gpch->regbase + 0x0110; ++ ++ local_irq_save(flags); ++ value = readl(gpdr); ++ value |= mask; ++ writel(mask, gpdr); ++ local_irq_restore(flags); + +-static int au1xxx_gpio1_direction_output(unsigned gpio, int value) +-{ +- gpio1->trioutclr = (0x01 & gpio); +- au1xxx_gpio1_write(gpio, value); + return 0; + } + +-int au1xxx_gpio_get_value(unsigned gpio) ++/* ++ * Set GPIO bank 1 direction to output ++ */ ++static int au1000_gpio1_direction_output(struct gpio_chip *chip, ++ unsigned offset, int value) + { +- if (gpio >= AU1XXX_GPIO_BASE) +-#if defined(CONFIG_SOC_AU1000) +- return 0; +-#else +- return au1xxx_gpio2_read(gpio); +-#endif ++ unsigned long flags; ++ u32 mask = 1 << offset; ++ u32 tmp; ++ struct au1000_gpio_chip *gpch; ++ void __iomem *gpdr; ++ ++ gpch = container_of(chip, struct au1000_gpio_chip, chip); ++ gpdr = gpch->regbase + 0x0100; ++ ++ local_irq_save(flags); ++ tmp = readl(gpdr); ++ writel(tmp, gpdr); ++ if (value) ++ writel(mask, gpch->regbase + 0x0108); + else +- return au1xxx_gpio1_read(gpio); +-} +-EXPORT_SYMBOL(au1xxx_gpio_get_value); ++ writel(mask, gpch->regbase + 0x0108); ++ local_irq_restore(flags); + +-void au1xxx_gpio_set_value(unsigned gpio, int value) +-{ +- if (gpio >= AU1XXX_GPIO_BASE) +-#if defined(CONFIG_SOC_AU1000) +- ; +-#else +- au1xxx_gpio2_write(gpio, value); +-#endif +- else +- au1xxx_gpio1_write(gpio, value); ++ return 0; + } +-EXPORT_SYMBOL(au1xxx_gpio_set_value); + +-int au1xxx_gpio_direction_input(unsigned gpio) +-{ +- if (gpio >= AU1XXX_GPIO_BASE) +-#if defined(CONFIG_SOC_AU1000) +- return -ENODEV; +-#else +- return au1xxx_gpio2_direction_input(gpio); ++struct au1000_gpio_chip au1000_gpio_chip[] = { ++ [0] = { ++ .regbase = (void __iomem *)SYS_BASE, ++ .chip = { ++ .label = "au1000-gpio1", ++ .direction_input = au1000_gpio1_direction_input, ++ .direction_output = au1000_gpio1_direction_output, ++ .get = au1000_gpio1_get, ++ .set = au1000_gpio1_set, ++ .base = 0, ++ .ngpio = 32, ++ }, ++ }, ++#if !defined(CONFIG_SOC_AU1000) ++ [1] = { ++ .regbase = (void __iomem *)GPIO2_BASE, ++ .chip = { ++ .label = "au1000-gpio2", ++ .direction_input = au1000_gpio2_direction_input, ++ .direction_output = au1000_gpio2_direction_output, ++ .get = au1000_gpio2_get, ++ .set = au1000_gpio2_set, ++ .base = AU1XXX_GPIO_BASE, ++ .ngpio = 32, ++ }, ++ }, + #endif ++}; + +- return au1xxx_gpio1_direction_input(gpio); +-} +-EXPORT_SYMBOL(au1xxx_gpio_direction_input); +- +-int au1xxx_gpio_direction_output(unsigned gpio, int value) ++int __init au1000_gpio_init(void) + { +- if (gpio >= AU1XXX_GPIO_BASE) +-#if defined(CONFIG_SOC_AU1000) +- return -ENODEV; +-#else +- return au1xxx_gpio2_direction_output(gpio, value); ++ gpiochip_add(&au1000_gpio_chip[0].chip); ++#if !defined(CONFIG_SOC_AU1000) ++ gpiochip_add(&au1000_gpio_chip[1].chip); + #endif + +- return au1xxx_gpio1_direction_output(gpio, value); ++ return 0; + } +-EXPORT_SYMBOL(au1xxx_gpio_direction_output); ++arch_initcall(au1000_gpio_init); +--- a/arch/mips/include/asm/mach-au1x00/gpio.h ++++ b/arch/mips/include/asm/mach-au1x00/gpio.h +@@ -1,69 +1,21 @@ + #ifndef _AU1XXX_GPIO_H_ + #define _AU1XXX_GPIO_H_ + +-#include +- + #define AU1XXX_GPIO_BASE 200 + +-struct au1x00_gpio2 { +- u32 dir; +- u32 reserved; +- u32 output; +- u32 pinstate; +- u32 inten; +- u32 enable; +-}; +- +-extern int au1xxx_gpio_get_value(unsigned gpio); +-extern void au1xxx_gpio_set_value(unsigned gpio, int value); +-extern int au1xxx_gpio_direction_input(unsigned gpio); +-extern int au1xxx_gpio_direction_output(unsigned gpio, int value); +- +- +-/* Wrappers for the arch-neutral GPIO API */ +- +-static inline int gpio_request(unsigned gpio, const char *label) +-{ +- /* Not yet implemented */ +- return 0; +-} +- +-static inline void gpio_free(unsigned gpio) +-{ +- /* Not yet implemented */ +-} +- +-static inline int gpio_direction_input(unsigned gpio) +-{ +- return au1xxx_gpio_direction_input(gpio); +-} +- +-static inline int gpio_direction_output(unsigned gpio, int value) +-{ +- return au1xxx_gpio_direction_output(gpio, value); +-} +- +-static inline int gpio_get_value(unsigned gpio) +-{ +- return au1xxx_gpio_get_value(gpio); +-} +- +-static inline void gpio_set_value(unsigned gpio, int value) +-{ +- au1xxx_gpio_set_value(gpio, value); +-} +- +-static inline int gpio_to_irq(unsigned gpio) +-{ +- return gpio; +-} +- +-static inline int irq_to_gpio(unsigned irq) +-{ +- return irq; +-} ++#define AU1000_GPIO2_DIR 0x00 ++#define AU1000_GPIO2_RSVD 0x04 ++#define AU1000_GPIO2_OUT 0x08 ++#define AU1000_GPIO2_ST 0x0C ++#define AU1000_GPIO2_INT 0x10 ++#define AU1000_GPIO2_EN 0x14 ++ ++#define gpio_get_value __gpio_get_value ++#define gpio_set_value __gpio_set_value ++ ++#define gpio_to_irq(gpio) NULL ++#define irq_to_gpio(irq) NULL + +-/* For cansleep */ + #include + + #endif /* _AU1XXX_GPIO_H_ */