ramips: add support for dir810l and asus rp-n53

Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37780 3c298f89-4303-0410-b956-a3cf2f4a3e73

target/linux/ramips/base-files/etc/uci-defaults/01_leds

@@ -74,6 +74,9 @@ case $board in
 	dir-620-d1)
 		set_wifi_led "d-link:green:wifi"
 		;;
+	dir-810l)
+		ucidef_set_led_default "power" "POWER" "dlink:green:power" "1"
+		;;
 	esr-9753)
 		set_wifi_led "rt2800pci-phy0::radio"
 		;;
@@ -135,6 +138,10 @@ case $board in
 	wnce2001)
 		set_wifi_led "netgear:green:wlan"
 		;;
+	rp-n53)
+		ucidef_set_led_netdev "eth" "Network" "asus:white:back" "eth0"
+		set_wifi_led "asus:blue:wifi"
+		;;
 esac
 
 ucidef_commit_leds

target/linux/ramips/base-files/etc/uci-defaults/02_network

@@ -197,7 +197,8 @@ ramips_setup_macs()
 
 	rt-n13u | \
 	hg255d	| \
-	fonera20n)
+	fonera20n |
+	dir-810l)
 		lan_mac=$(mtd_get_mac_binary factory 40)
 		wan_mac=$(macaddr_add "$lan_mac" 1)
 		;;

target/linux/ramips/base-files/lib/ramips.sh

@@ -88,6 +88,9 @@ ramips_board_detect() {
 	*"DIR-645")
 		name="dir-645"
 		;;
+	*"DIR-810L")
+		name="dir-810l"
+		;;
 	*"DAP-1350")
 		name="dap-1350"
 		;;
@@ -166,6 +169,9 @@ ramips_board_detect() {
 	*"PWH2004")
 		name="pwh2004"
 		;;
+	*"Asus RP-N53")
+		name="rp-n53"
+		;;
 	*"RT-G32 B1")
 		name="rt-g32-b1"
 		;;

target/linux/ramips/base-files/lib/upgrade/platform.sh

@@ -36,6 +36,7 @@ platform_check_image() {
 	dir-615-d | \
 	dir-620-a1 | \
 	dir-620-d1 | \
+	dir-810l | \
 	dap-1350 | \
 	esr-9753 | \
 	f7c027 | \
@@ -56,6 +57,7 @@ platform_check_image() {
 	omni-emb | \
 	omni-emb-hpm | \
 	psr-680w | \
+	rp-n53 | \
 	rt-g32-b1 | \
 	rt-n10-plus | \
 	rt-n15 | \

target/linux/ramips/dts/DIR-810L.dts

@@ -0,0 +1,127 @@
+/dts-v1/;
+
+/include/ "mt7620a.dtsi"
+
+/ {
+	compatible = "dlink,dir-810l", "ralink,mt7620a-soc";
+	model = "D-Link DIR-810L";
+
+	palmbus@10000000 {
+		sysc@0 {
+			ralink,pinmux = "spi", "uartlite", "ephy";
+			ralink,gpiomux = "jtag", "mdio", "rgmii1", "rgmii1", "i2c", "wled";
+			ralink,uartmux = "gpio";
+			ralink,wdtmux = <1>;
+		};
+
+		gpio0: gpio@600 {
+			status = "okay";
+		};
+
+		spi@b00 {
+			status = "okay";
+		
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "mx25l6405d";
+				reg = <0 0>;
+				linux,modalias = "m25p80";
+				spi-max-frequency = <10000000>;
+
+				partition@0 {
+					label = "u-boot";
+					reg = <0x0 0x30000>;
+					read-only;
+				};
+
+				partition@30000 {
+					label = "u-boot-env";
+					reg = <0x30000 0x10000>;
+					read-only;
+				};
+
+				factory: partition@40000 {
+					label = "factory";
+					reg = <0x40000 0x10000>;
+					read-only;
+				};
+
+				factory5g: partition@50000 {
+					label = "factory5g";
+					reg = <0x50000 0x10000>;
+					read-only;
+				};
+
+				partition@60000 {
+					label = "Wolf_Config";
+					reg = <0x60000 0x10000>;
+					read-only;
+				};
+
+				partition@70000 {
+					label = "MyDlink";
+					reg = <0x70000 0x80000>;
+					read-only;
+				};
+
+				partition@e0000 {
+					label = "Jffs2";
+					reg = <0xe0000 0x80000>;
+					read-only;
+				};
+
+				partition@170000 {
+					label = "firmware";
+					reg = <0x170000 0x690000>;
+				};
+			};
+		};
+	};
+
+	ethernet@10100000 {
+		status = "okay";
+	};
+
+	gsw@10110000 {
+		status = "okay";
+		ralink,port4 = "ephy";
+	};
+
+	pcie@10140000 {
+		status = "okay";
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+		reset {
+			label = "reset";
+			gpios = <&gpio0 1 1>;
+			linux,code = <0x100>;
+		};
+		wps {
+			label = "wps";
+			gpios = <&gpio0 2 1>;
+			linux,code = <0x100>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		power {
+			label = "dlink:green:power";
+			gpios = <&gpio0 9 0>;
+		};
+		internet {
+			label = "asus:yellow:internet";
+			gpios = <&gpio0 12 0>;
+		};
+		status {
+			label = "asus:internet:status";
+			gpios = <&gpio0 13 0>;
+		};
+	};
+};

target/linux/ramips/dts/RP-N53.dts

@@ -0,0 +1,149 @@
+/dts-v1/;
+
+/include/ "mt7620a.dtsi"
+
+/ {
+	compatible = "asus,rp-n53", "ralink,mt7620a-soc";
+	model = "Asus RP-N53";
+
+	chosen {
+		bootargs = "console=ttyS0,57600";
+	};
+
+	palmbus@10000000 {
+		sysc@0 {
+			ralink,pinmux = "spi", "uartlite", "wled", "ephy", "i2c";
+			ralink,gpiomux = "jtag", "mdio", "rgmii1", "rgmii1";
+			ralink,uartmux = "gpio";
+			ralink,wdtmux = <1>;
+		};
+
+		gpio0: gpio@600 {
+			status = "okay";
+		};
+
+		gpio1: gpio@638 {
+			status = "okay";
+		};
+
+		i2c@900 {
+			status = "okay";
+		};
+
+		spi@b00 {
+			status = "okay";
+		
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "mx25l6405d";
+				reg = <0 0>;
+				linux,modalias = "m25p80";
+				spi-max-frequency = <10000000>;
+
+				partition@0 {
+					label = "u-boot";
+					reg = <0x0 0x30000>;
+					read-only;
+				};
+
+				partition@30000 {
+					label = "u-boot-env";
+					reg = <0x30000 0x10000>;
+					read-only;
+				};
+
+				factory: partition@40000 {
+					label = "factory";
+					reg = <0x40000 0x10000>;
+					read-only;
+				};
+
+				partition@50000 {
+					label = "firmware";
+					reg = <0x50000 0x7b0000>;
+				};
+			};
+		};
+	};
+
+	codec {
+		compatible = "ralink,mt7620-audio";
+	};
+
+	ethernet@10100000 {
+		status = "okay";
+	};
+
+	gsw@10110000 {
+		status = "okay";
+		ralink,port4 = "ephy";
+	};
+
+	pcie@10140000 {
+		status = "okay";
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+		touch {
+			label = "touch";
+			gpios = <&gpio1 0 1>;
+			linux,code = <0x100>;
+		};
+		wps {
+			label = "wps";
+			gpios = <&gpio1 1 1>;
+			linux,code = <0x100>;
+		};
+		reset {
+			label = "reset";
+			gpios = <&gpio1 2 1>;
+			linux,code = <0x100>;
+		};
+		audio {
+			label = "audio";
+			gpios = <&gpio1 3 0>;
+			linux,code = <0x101>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		backlight {
+			label = "asus:white:back";
+			gpios = <&gpio1 4 1>;
+		};
+		wifi0 {
+			label = "asus:blue:5g3";
+			gpios = <&gpio1 5 1>;
+		};
+		wifi1 {
+			label = "asus:blue:5g2";
+			gpios = <&gpio1 6 1>;
+		};
+		wifi2 {
+			label = "asus:blue:5g1";
+			gpios = <&gpio1 7 1>;
+		};
+		wifi3 {
+			label = "asus:blue:wifi";
+			gpios = <&gpio1 8 1>;
+		};
+		wifi4 {
+			label = "asus:blue:2g1";
+			gpios = <&gpio1 9 1>;
+		};
+		wifi5 {
+			label = "asus:blue:2g2";
+			gpios = <&gpio1 10 1>;
+		};
+		wifi6 {
+			label = "asus:blue:2g3";
+			gpios = <&gpio1 11 1>;
+		};
+	};
+};

target/linux/ramips/image/Makefile

@@ -585,11 +585,16 @@ endif
 
 Image/Build/Profile/MT7620a=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a,MT7620a)
 Image/Build/Profile/MT7620a_MT7610e=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a_mt7610e,MT7620a_MT7610e)
+Image/Build/Profile/RP-N53=$(call BuildFirmware/Default8M/$(1),$(1),rp_n53,RP-N53)
+dlink810l_mtd_size=6881280
+Image/Build/Profile/DIR-810L=$(call BuildFirmware/CustomFlash/$(1),$(1),dir-810l,DIR-810L,$(dlink810l_mtd_size))
 
 ifeq ($(SUBTARGET),mt7620a)
 define Image/Build/Profile/Default
 	$(call Image/Build/Profile/MT7620a,$(1))
 	$(call Image/Build/Profile/MT7620a_MT7610e,$(1))
+	$(call Image/Build/Profile/RP-N53,$(1))
+	$(call Image/Build/Profile/DIR-810L,$(1))
 endef
 endif