cns3xxx: add PPS support for laguna

Many Laguna products have on-board GPS with Pulse-per-second (PPS)
support.  This patch adds kernel support (statically) and adds
the platform data in laguna board support.
 
Signed-off-by: Tim Harvey <tharvey@gateworks.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34115 3c298f89-4303-0410-b956-a3cf2f4a3e73

target/linux/cns3xxx/config-3.3

@@ -131,6 +131,7 @@ CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_NET_VENDOR_CAVIUM=y
 CONFIG_NLS=y
 CONFIG_NR_CPUS=2
+CONFIG_NTP_PPS=y
 CONFIG_OUTER_CACHE=y
 CONFIG_OUTER_CACHE_SYNC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
@@ -143,7 +144,13 @@ CONFIG_PHYLIB=y
 CONFIG_PL310_ERRATA_588369=y
 CONFIG_PL310_ERRATA_727915=y
 CONFIG_PL310_ERRATA_769419=y
+CONFIG_PPS=y
+CONFIG_PPS_CLIENT_GPIO=y
+# CONFIG_PPS_CLIENT_KTIMER is not set
+# CONFIG_PPS_CLIENT_LDISC is not set
+# CONFIG_PPS_DEBUG is not set
 # CONFIG_PREEMPT_RCU is not set
+# CONFIG_PTP_1588_CLOCK is not set
 CONFIG_RAID_ATTRS=y
 CONFIG_RFS_ACCEL=y
 CONFIG_RPS=y

target/linux/cns3xxx/files/arch/arm/mach-cns3xxx/laguna.c

@@ -36,6 +36,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 #include <linux/if_ether.h>
+#include <linux/pps-gpio.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -580,6 +581,22 @@ static struct platform_device laguna_watchdog = {
 	.resource	= laguna_watchdog_resources,
 };
 
+/*
+ * GPS PPS
+ */
+static struct pps_gpio_platform_data laguna_pps_data = {
+	.gpio_pin = 0,
+	.gpio_label = "GPS_PPS",
+	.assert_falling_edge = 0,
+	.capture_clear = 0,
+};
+
+static struct platform_device laguna_pps_device = {
+	.name = "pps-gpio",
+	.id = -1,
+	.dev.platform_data = &laguna_pps_data,
+};
+
 /*
  * GPIO
  */
@@ -869,6 +886,9 @@ static int __init laguna_model_setup(void)
 		    (laguna_info.config_bitmap & SPI1_LOAD))
 			platform_device_register(&laguna_spi_controller);
 
+		if (laguna_info.config2_bitmap & GPS_LOAD)
+			platform_device_register(&laguna_pps_device);
+
 		/*
 		 * Do any model specific setup not known by the bitmap by matching
 		 *  the first 6 characters of the model name