fix ar7 compile

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7331 3c298f89-4303-0410-b956-a3cf2f4a3e73
master
Felix Fietkau 2007-05-24 15:59:32 +00:00
parent 780472d02f
commit 29fd1c825d
10 changed files with 49 additions and 23 deletions

View File

@ -691,3 +691,17 @@ diff -urN sangam_atm-07.01.00.10/tn7sar.c sangam-atm-0.3/tn7sar.c
#include <linux/proc_fs.h>
#include <linux/string.h>
#include <linux/ctype.h>
diff -ur atm.old/tn7dsl.c atm.dev/tn7dsl.c
--- atm.old/tn7dsl.c 2007-05-24 17:36:33.865636000 +0200
+++ atm.dev/tn7dsl.c 2007-05-24 17:41:32.094298496 +0200
@@ -3430,8 +3430,7 @@
if (initialized == 1)
return;
- dslmod_sysctl_header = register_sysctl_table(dslmod_root_table, 1);
- dslmod_root_table->child->de->owner = THIS_MODULE;
+ dslmod_sysctl_header = register_sysctl_table(dslmod_root_table);
/*
* set the defaults

View File

@ -4,11 +4,15 @@ CONFIG_32BIT=y
CONFIG_AR7=y
CONFIG_AR7_GPIO=y
CONFIG_AR7_WDT=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
# CONFIG_ATMEL is not set
CONFIG_BASE_SMALL=0
# CONFIG_BCM43XX is not set
CONFIG_BITREVERSE=y
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_BOOT_ELF32=y
# CONFIG_BROADCOM_PHY is not set
# CONFIG_BT is not set
CONFIG_CMDLINE="init=/etc/preinit rootfstype=squashfs,jffs2,"
CONFIG_CPMAC=y
@ -44,13 +48,15 @@ CONFIG_CPU_SUPPORTS_HIGHMEM=y
# CONFIG_DM9000 is not set
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FIXED_MII_100_FDX=y
# CONFIG_FIXED_MII_10_FDX is not set
CONFIG_FIXED_PHY=y
CONFIG_FS_POSIX_ACL=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
# CONFIG_GEN_RTC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
# CONFIG_HERMES is not set
# CONFIG_HOSTAP_PCI is not set
# CONFIG_HOSTAP_PLX is not set
@ -65,7 +71,6 @@ CONFIG_HZ_100=y
# CONFIG_HZ_48 is not set
# CONFIG_I2C is not set
# CONFIG_IDE is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
CONFIG_IRQ_CPU=y
@ -77,7 +82,6 @@ CONFIG_LEDS_AR7=y
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_MACH_VR41XX is not set
CONFIG_MINI_FO=y
CONFIG_MIPS=y
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_BOSPORUS is not set
@ -112,6 +116,7 @@ CONFIG_MIPS_MT_DISABLED=y
CONFIG_MTD=y
# CONFIG_MTD_ABSENT is not set
CONFIG_MTD_AR7_PARTS=y
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_MTD_BLOCK2MTD is not set
CONFIG_MTD_CFI=y
@ -158,7 +163,19 @@ CONFIG_MTD_PHYSMAP_START=0x10000000
# CONFIG_MTD_SLRAM is not set
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_NET_PCI is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_NF_CONNTRACK=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CT_ACCT=y
# CONFIG_NF_NAT_AMANDA is not set
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_NEEDED=y
# CONFIG_NF_NAT_PPTP is not set
CONFIG_NF_NAT_SIP=m
# CONFIG_NF_NAT_TFTP is not set
CONFIG_NODES_SHIFT=6
# CONFIG_PAGE_SIZE_16KB is not set
CONFIG_PAGE_SIZE_4KB=y
@ -167,8 +184,9 @@ CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PCIPCWATCHDOG is not set
CONFIG_PHYLIB=y
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_PNPACPI is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_STB810 is not set
# CONFIG_PRISM54 is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_RTC is not set
@ -192,7 +210,7 @@ CONFIG_SERIAL_8250_PCI=y
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SWAP_IO_SPACE=y
CONFIG_GENERIC_GPIO=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
@ -203,4 +221,5 @@ CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_TRAD_SIGNALS=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_USB is not set
# CONFIG_YENTA is not set
CONFIG_ZONE_DMA=y
CONFIG_ZONE_DMA_FLAG=1

View File

@ -117,7 +117,7 @@ static void ar7_mask_secondary_irq(unsigned int irq)
}
void __init arch_init_irq(void) {
mips_cpu_irq_init(0);
mips_cpu_irq_init();
ar7_irq_init(8);
}

View File

@ -188,7 +188,7 @@ void __init prom_meminit(void)
#endif
}
unsigned long __init prom_free_prom_memory(void)
void __init prom_free_prom_memory(void)
{
return 0;
return;
}

View File

@ -279,7 +279,6 @@ static void __init console_config(void)
void __init prom_init(void)
{
prom_printf("\nLINUX running...\n");
ar7_init_cmdline(fw_arg0, (char **)fw_arg1);
ar7_init_env((struct env_var *)fw_arg2);
console_config();

View File

@ -51,13 +51,11 @@ static void ar7_machine_restart(char *command)
{
volatile u32 *softres_reg = (u32 *)ioremap(AR7_REGS_RESET +
AR7_RESET_SOFTWARE, 1);
prom_printf("Reboot\n");
*softres_reg = 1;
}
static void ar7_machine_halt(void)
{
prom_printf("Halt\n");
while (1);
}
@ -65,7 +63,6 @@ static void ar7_machine_power_off(void)
{
volatile u32 *power_reg = (u32 *)ioremap(AR7_REGS_POWER, 1);
u32 power_state = *power_reg | (3 << 30);
prom_printf("Power off\n");
*power_reg = power_state;
ar7_machine_halt();
}

View File

@ -30,8 +30,7 @@
#include <linux/types.h>
#include <linux/cdev.h>
#include <asm/gpio.h>
#include <gpio.h>
#define DRVNAME "ar7_gpio"
#define LONGNAME "TI AR7 GPIOs Driver"

View File

@ -25,8 +25,7 @@
#include <linux/leds.h>
#include <linux/err.h>
#include <asm/io.h>
#include <asm/gpio.h>
#include <gpio.h>
#define DRVNAME "ar7-leds"
#define LONGNAME "TI AR7 LEDs driver"

View File

@ -38,7 +38,7 @@
#include <linux/phy.h>
#include <linux/platform_device.h>
#include <asm/ar7/ar7.h>
#include <asm/gpio.h>
#include <gpio.h>
MODULE_AUTHOR("Eugene Konev");
MODULE_DESCRIPTION("TI AR7 ethernet driver (CPMAC)");

View File

@ -10,7 +10,6 @@
#ifndef _ASM_AR7_SPACES_H
#define _ASM_AR7_SPACES_H
#define CAC_BASE 0x80000000
#define IO_BASE 0xa0000000
#define UNCAC_BASE 0xa0000000
@ -21,7 +20,7 @@
* We handle pages at KSEG0 for kernels with 32 bit address space.
*/
#define PAGE_OFFSET 0x80000000UL
#define ARCH_PFN_OFFSET (0x14000000 >> PAGE_SHIFT)
#define PHYS_OFFSET 0x14000000UL
/*
* Memory above this physical address will be considered highmem.