[lantiq] gigaset 76x

* fixes leds
* adds all leds found on the sx763 board
* removes board_config from flash layout because wireless data is stored in kernel (ath5k)
* fix button handling

Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29763 3c298f89-4303-0410-b956-a3cf2f4a3e73
master
John Crispin 2012-01-17 12:10:35 +00:00
parent b58ab60fff
commit 286f36a31d
2 changed files with 17 additions and 21 deletions

View File

@ -95,6 +95,8 @@ GIGASX76X)
set_led_wlan "wifi" "wifi" "soc:green:wifi" "phy0radio"
set_led_netdev "online" "online" "soc:green:online" "nas0"
set_led_usbdev "usb" "USB" "soc:green:usb" "1-1"
set_led_default "adsl" "adsl" "soc:green:adsl" "0"
set_led_default "voip" "voip" "soc:green:voip" "0"
set_led_default "phone1" "fxs1" "soc:green:phone1" "0"
set_led_default "phone2" "fxs2" "soc:green:phone2" "0"
set_led_default "line" "line" "soc:green:line" "0"

View File

@ -54,25 +54,20 @@ static struct mtd_partition gigasx76x_partitions[] =
{
.name = "linux",
.offset = 0x020000,
.size = 0x7d0000,
},
{
.name = "board_config",
.offset = 0x7f0000,
.size = 0x010000,
.size = 0x7e0000,
},
};
static struct gpio_led
gigasx76x_gpio_leds[] __initdata = {
{ .name = "soc:green:usb", .gpio = 202, },
{ .name = "soc:green:wifi", .gpio = 203, },
{ .name = "soc:green:phone2", .gpio = 204, },
{ .name = "soc:green:phone1", .gpio = 205, },
{ .name = "soc:green:line", .gpio = 206, },
{ .name = "soc:green:online", .gpio = 207, },
{ .name = "soc:green:voip", .gpio = 208, },
{ .name = "soc:green:voip", .gpio = 216, },
{ .name = "soc:green:adsl", .gpio = 217, },
{ .name = "soc:green:usb", .gpio = 218, },
{ .name = "soc:green:wifi", .gpio = 219, },
{ .name = "soc:green:phone2", .gpio = 220, },
{ .name = "soc:green:phone1", .gpio = 221, },
{ .name = "soc:green:line", .gpio = 222, },
{ .name = "soc:green:online", .gpio = 223, },
};
static struct gpio_keys_button
@ -80,19 +75,19 @@ gigasx76x_gpio_keys[] __initdata = {
{
.desc = "wps",
.type = EV_KEY,
.code = BTN_0,
.code = KEY_WPS_BUTTON,
.debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
.gpio = 22,
.active_low = 1,
},
/*{
.desc = "factory",
{
.desc = "reset",
.type = EV_KEY,
.code = BTN_1,
.code = BTN_0,
.debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
.gpio = 14,
.active_low = 1,
},*/
.active_low = 0,
},
};
static struct physmap_flash_data gigasx76x_flash_data = {
@ -228,7 +223,6 @@ static void __init gigasx76x_init(void) {
ltq_register_nor(&gigasx76x_flash_data);
ltq_register_pci(&ltq_pci_data);
ltq_register_tapi();
ltq_register_madwifi_eep(GIGASX76X_MADWIFI_ADDR);
ltq_add_device_gpio_leds(-1, ARRAY_SIZE(gigasx76x_gpio_leds), gigasx76x_gpio_leds);
ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL, ARRAY_SIZE(gigasx76x_gpio_keys), gigasx76x_gpio_keys);
ltq_register_ath5k(gigasx76x_ath5k_eeprom_data, gigasx76x_ath5k_eeprom_mac);