hak5
/
wifipineapple-openwrt
mirror of https://github.com/hak5/wifipineapple-openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

[adm5120] initial 2.6.26 support 

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11946 3c298f89-4303-0410-b956-a3cf2f4a3e73
master
Gabor Juhos 2008-07-26 19:53:34 +00:00
parent 21d378afc7
commit 268e516a0d
20 changed files with 1629 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

112
target/linux/adm5120/patches-2.6.26/001-adm5120.patch Normal file
View File

@ -0,0 +1,112 @@
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -18,6 +18,21 @@
prompt "System type"
default SGI_IP22
+config MIPS_ADM5120
+ bool "ADM5120 SoC based machines"
+ select CEVT_R4K
+ select CSRC_R4K
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_HAS_EARLY_PRINTK
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select IRQ_CPU
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select GENERIC_GPIO
+ select SWAP_IO_SPACE if CPU_BIG_ENDIAN
+
config MACH_ALCHEMY
bool "Alchemy processor based machines"
@@ -687,6 +702,7 @@
endchoice
+source "arch/mips/adm5120/Kconfig"
source "arch/mips/au1000/Kconfig"
source "arch/mips/basler/excite/Kconfig"
source "arch/mips/jazz/Kconfig"
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -174,6 +174,16 @@
load-$(CONFIG_MACH_JAZZ) += 0xffffffff80080000
#
+# ADMtek 5120
+#
+
+libs-$(CONFIG_MIPS_ADM5120) += arch/mips/adm5120/prom/
+core-$(CONFIG_MIPS_ADM5120) += arch/mips/adm5120/
+core-$(CONFIG_MIPS_ADM5120) += arch/mips/adm5120/boards/
+cflags-$(CONFIG_MIPS_ADM5120) += -Iinclude/asm-mips/mach-adm5120
+load-$(CONFIG_MIPS_ADM5120) += 0xffffffff80001000
+
+#
# Common Alchemy Au1x00 stuff
#
core-$(CONFIG_SOC_AU1X00) += arch/mips/au1000/common/
--- a/include/asm-mips/bootinfo.h
+++ b/include/asm-mips/bootinfo.h
@@ -94,6 +94,58 @@
#define MACH_MSP7120_FPGA 5 /* PMC-Sierra MSP7120 Emulation */
#define MACH_MSP_OTHER 255 /* PMC-Sierra unknown board type */
+/*
+ * Valid machtype for group ADMtek ADM5120
+ */
+#define MACH_ADM5120_GENERIC 0 /* Generic board */
+#define MACH_ADM5120_WP54G_WRT 1 /* Compex WP54G-WRT */
+#define MACH_ADM5120_WP54G 2 /* Compex WP54G */
+#define MACH_ADM5120_WP54AG 3 /* Compex WP54AG */
+#define MACH_ADM5120_WPP54G 4 /* Compex WPP54G */
+#define MACH_ADM5120_WPP54AG 5 /* Compex WPP54AG */
+#define MACH_ADM5120_NP28G 6 /* Compex NP28G */
+#define MACH_ADM5120_NP28GHS 7 /* Compex NP28G HotSpot */
+#define MACH_ADM5120_NP27G 8 /* Compex NP27G */
+#define MACH_ADM5120_WP54Gv1C 9 /* Compex WP54G version 1C */
+#define MACH_ADM5120_RB_111 10 /* Mikrotik RouterBOARD 111 */
+#define MACH_ADM5120_RB_112 11 /* Mikrotik RouterBOARD 112 */
+#define MACH_ADM5120_RB_133 12 /* Mikrotik RouterBOARD 133 */
+#define MACH_ADM5120_RB_133C 13 /* Mikrotik RouterBOARD 133c */
+#define MACH_ADM5120_RB_150 14 /* Mikrotik RouterBOARD 150 */
+#define MACH_ADM5120_RB_153 15 /* Mikrotik RouterBOARD 153 */
+#define MACH_ADM5120_HS100 16 /* ZyXEL HomeSafe 100/100W */
+#define MACH_ADM5120_P334 17 /* ZyXEL Prestige 334 */
+#define MACH_ADM5120_P334U 18 /* ZyXEL Prestige 334U */
+#define MACH_ADM5120_P334W 19 /* ZyXEL Prestige 334W */
+#define MACH_ADM5120_P334WH 20 /* ZyXEL Prestige 334WH */
+#define MACH_ADM5120_P334WHD 21 /* ZyXEL Prestige 334WHD */
+#define MACH_ADM5120_P334WT 22 /* ZyXEL Prestige 334WT */
+#define MACH_ADM5120_P335 23 /* ZyXEL Prestige 335/335WT */
+#define MACH_ADM5120_P335PLUS 24 /* ZyXEL Prestige 335Plus */
+#define MACH_ADM5120_P335U 25 /* ZyXEL Prestige 335U */
+#define MACH_ADM5120_ES2108 26 /* ZyXEL Ethernet Switch 2108 */
+#define MACH_ADM5120_ES2108F 27 /* ZyXEL Ethernet Switch 2108-F */
+#define MACH_ADM5120_ES2108G 28 /* ZyXEL Ethernet Switch 2108-G */
+#define MACH_ADM5120_ES2108LC 29 /* ZyXEL Ethernet Switch 2108-LC */
+#define MACH_ADM5120_ES2108PWR 30 /* ZyXEL Ethernet Switch 2108-PWR */
+#define MACH_ADM5120_ES2024A 31 /* ZyXEL Ethernet Switch 2024A */
+#define MACH_ADM5120_ES2024PWR 32 /* ZyXEL Ethernet Switch 2024PWR */
+#define MACH_ADM5120_CAS630 33 /* Cellvision CAS-630/630W */
+#define MACH_ADM5120_CAS670 34 /* Cellvision CAS-670/670W */
+#define MACH_ADM5120_CAS700 36 /* Cellvision CAS-700/700W */
+#define MACH_ADM5120_CAS771 37 /* Cellvision CAS-771/771W */
+#define MACH_ADM5120_CAS790 38 /* Cellvision CAS-790 */
+#define MACH_ADM5120_CAS861 39 /* Cellvision CAS-861/861W */
+#define MACH_ADM5120_NFS101U 40 /* Cellvision NFS-101U/101WU */
+#define MACH_ADM5120_NFS202U 41 /* Cellvision NFS-202U/202WU */
+#define MACH_ADM5120_EASY5120PATA 42 /* Infineon EASY 5120P-ATA */
+#define MACH_ADM5120_EASY5120RT 43 /* Infineon EASY 5120-RT */
+#define MACH_ADM5120_EASY5120WVOIP 44 /* Infineon EASY 5120-WVoIP */
+#define MACH_ADM5120_EASY83000 45 /* Infineon EASY-83000 */
+#define MACH_ADM5120_BR6104K 46 /* Edimax BR-6104K/BR-6104KP */
+#define MACH_ADM5120_RB_192 47 /* Mikrotik RouterBOARD 192 */
+#define MACH_ADM5120_BR61x4WG 48 /* Edimax BR-6104Wg/BR-6114WG */
+
#define CL_SIZE COMMAND_LINE_SIZE
extern char *system_type;

22
target/linux/adm5120/patches-2.6.26/002-adm5120_flash.patch Normal file
View File

@ -0,0 +1,22 @@
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -586,5 +586,9 @@
This selection automatically selects the map_ram driver.
+config MTD_ADM5120
+ tristate "Map driver for ADM5120 based boards"
+ depends on MIPS_ADM5120
+
endmenu
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -44,6 +44,7 @@
obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
obj-$(CONFIG_MTD_PCI) += pci.o
obj-$(CONFIG_MTD_ALCHEMY) += alchemy-flash.o
+obj-$(CONFIG_MTD_ADM5120) += adm5120-flash.o
obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o
obj-$(CONFIG_MTD_EDB7312) += edb7312.o
obj-$(CONFIG_MTD_IMPA7) += impa7.o

23
target/linux/adm5120/patches-2.6.26/003-adm5120_switch.patch Normal file
View File

@ -0,0 +1,23 @@
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -613,6 +613,10 @@
If you have an Alchemy Semi AU1X00 based system
say Y. Otherwise, say N.
+config MIPS_ADM5120_ENET
+ tristate "MIPS ADM5120 Ethernet switch support"
+ depends on MIPS_ADM5120
+
config SGI_IOC3_ETH
bool "SGI IOC3 Ethernet"
depends on PCI && SGI_IP27
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -186,6 +186,7 @@
# This is also a 82596 and should probably be merged
obj-$(CONFIG_LP486E) += lp486e.o
+obj-$(CONFIG_MIPS_ADM5120_ENET) += adm5120sw.o
obj-$(CONFIG_ETH16I) += eth16i.o
obj-$(CONFIG_ZORRO8390) += zorro8390.o
obj-$(CONFIG_HPLANCE) += hplance.o 7990.o

33
target/linux/adm5120/patches-2.6.26/005-adm5120_usb.patch Normal file
View File

@ -0,0 +1,33 @@
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -4,6 +4,10 @@
comment "USB Host Controller Drivers"
depends on USB
+config USB_ADM5120_HCD
+ tristate "ADM5120 HCD support (EXPERIMENTAL)"
+ depends on USB && MIPS_ADM5120 && EXPERIMENTAL
+
config USB_C67X00_HCD
tristate "Cypress C67x00 HCD support"
depends on USB
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -10,6 +10,7 @@
obj-$(CONFIG_PCI) += pci-quirks.o
+obj-$(CONFIG_USB_ADM5120_HCD) += adm5120-hcd.o
obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o
obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -16,6 +16,7 @@
obj-$(CONFIG_USB_SL811_HCD) += host/
obj-$(CONFIG_USB_U132_HCD) += host/
obj-$(CONFIG_USB_R8A66597_HCD) += host/
+obj-$(CONFIG_USB_ADM5120_HCD) += host/
obj-$(CONFIG_USB_C67X00_HCD) += c67x00/

34
target/linux/adm5120/patches-2.6.26/006-adm5120_leds.patch Normal file
View File

@ -0,0 +1,34 @@
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -24,6 +24,21 @@
This option enables support for LEDs driven using outputs
of the dedicated PWM controller found on newer Atmel SOCs.
+config LEDS_ADM5120
+ tristate "LED Support for ADM5120 GPIO LEDs"
+ depends on LEDS_GPIO && MIPS_ADM5120
+ help
+ This option enables support for LEDs connected to GPIO lines
+ on ADM5120 SoC based platforms.
+
+config LEDS_ADM5120_EXPERIMENTAL
+ bool "Enable ADM5120 LEDs experimental code"
+ depends on LEDS_ADM5120
+
+config LEDS_ADM5120_DIAG
+ bool "Enable ADM5120 LEDs diagnostic mode"
+ depends on LEDS_ADM5120
+
config LEDS_CORGI
tristate "LED Support for the Sharp SL-C7x0 series"
depends on LEDS_CLASS && PXA_SHARP_C7xx
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -5,6 +5,7 @@
obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o
# LED Platform Drivers
+obj-$(CONFIG_LEDS_ADM5120) += leds-adm5120.o
obj-$(CONFIG_LEDS_ATMEL_PWM) += leds-atmel-pwm.o
obj-$(CONFIG_LEDS_CORGI) += leds-corgi.o
obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o

19
target/linux/adm5120/patches-2.6.26/007-adm5120_pci.patch Normal file
View File

@ -0,0 +1,19 @@
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -48,3 +48,4 @@
obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o
obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o
obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o
+obj-$(CONFIG_PCI_ADM5120) += pci-adm5120.o
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1707,6 +1707,9 @@
#define PCI_VENDOR_ID_ESDGMBH 0x12fe
#define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111
+#define PCI_VENDOR_ID_ADMTEK 0x1317
+#define PCI_DEVICE_ID_ADMTEK_ADM5120 0x5120
+
#define PCI_VENDOR_ID_SIIG 0x131f
#define PCI_SUBVENDOR_ID_SIIG 0x131f
#define PCI_DEVICE_ID_SIIG_1S_10x_550 0x1000

22
target/linux/adm5120/patches-2.6.26/009-adm5120_leds_switch_trigger.patch Normal file
View File

@ -0,0 +1,22 @@
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -215,4 +215,12 @@
tristate "LED Morse Trigger"
depends on LEDS_TRIGGERS
+config LEDS_TRIGGER_ADM5120_SWITCH
+ tristate "LED ADM5120 Switch Port Status Trigger"
+ depends on LEDS_TRIGGERS && LEDS_ADM5120
+ help
+ This allows LEDs to be controlled by the port states of
+ the ADM5120 built-in Ethernet Switch
+ If unsure, say N.
+
endif # NEW_LEDS
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -30,3 +30,4 @@
obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT) += ledtrig-heartbeat.o
obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o
obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o
+obj-$(CONFIG_LEDS_TRIGGER_ADM5120_SWITCH) += ledtrig-adm5120-switch.o

35
target/linux/adm5120/patches-2.6.26/100-mtd_myloder_partition_parser.patch Normal file
View File

@ -0,0 +1,35 @@
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -174,6 +174,22 @@
---help---
TI AR7 partitioning support
+config MTD_MYLOADER_PARTS
+ tristate "MyLoader partition parsing"
+ depends on MIPS_ADM5120 && MTD_PARTITIONS
+ ---help---
+ MyLoader is a bootloader which allows the user to define partitions
+ in flash devices, by putting a table in the second erase block
+ on the device, similar to a partition table. This table gives the
+ offsets and lengths of the user defined partitions.
+
+ If you need code which can detect and parse these tables, and
+ register MTD 'partitions' corresponding to each image detected,
+ enable this option.
+
+ You will still need the parsing functions to be called by the driver
+ for your particular device. It won't happen automatically.
+
comment "User Modules And Translation Layers"
config MTD_CHAR
--- a/drivers/mtd/Makefile
+++ b/drivers/mtd/Makefile
@@ -13,6 +13,7 @@
obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o
+obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
# 'Users' - code which presents functionality to userspace.
obj-$(CONFIG_MTD_CHAR) += mtdchar.o

91
target/linux/adm5120/patches-2.6.26/101-cfi_fixup_macronix_bootloc.patch Normal file
View File

@ -0,0 +1,91 @@
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -47,12 +47,19 @@
#define MANUFACTURER_AMD 0x0001
#define MANUFACTURER_ATMEL 0x001F
#define MANUFACTURER_SST 0x00BF
+#define MANUFACTURER_MACRONIX 0x00C2
#define SST49LF004B 0x0060
#define SST49LF040B 0x0050
#define SST49LF008A 0x005a
#define AT49BV6416 0x00d6
#define MANUFACTURER_SAMSUNG 0x00ec
+/* Macronix */
+#define MX29LV160B 0x2249 /* MX29LV160 Bottom-boot chip */
+#define MX29LV160T 0x22C4 /* MX29LV160 Top-boot chip */
+#define MX29LV320B 0x22A8 /* MX29LV320 Bottom-boot chip */
+#define MX29LV320T 0x22A7 /* MX29LV320 Top-boot chip */
+
static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
@@ -243,6 +250,41 @@
}
}
+#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
+/*
+ * Some Macronix chips has no/bad bootblock information in the CFI table
+ */
+static void fixup_macronix_bootloc(struct mtd_info *mtd, void* param)
+{
+ struct map_info *map = mtd->priv;
+ struct cfi_private *cfi = map->fldrv_priv;
+ struct cfi_pri_amdstd *extp = cfi->cmdset_priv;
+ __u8 t;
+
+ switch (cfi->id) {
+ /* TODO: put affected chip ids here */
+ case MX29LV160B:
+ case MX29LV320B:
+ t = 2; /* Bottom boot */
+ break;
+ case MX29LV160T:
+ case MX29LV320T:
+ t = 3; /* Top boot */
+ break;
+ default:
+ return;
+ }
+
+ if (extp->TopBottom == t)
+ /* boot location detected by the CFI layer is correct */
+ return;
+
+ extp->TopBottom = t;
+ printk("%s: Macronix chip detected, id:0x%04X, boot location forced "
+ "to %s\n", map->name, cfi->id, (t == 2) ? "bottom" : "top");
+}
+#endif /* CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC */
+
static struct cfi_fixup cfi_fixup_table[] = {
{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
#ifdef AMD_BOOTLOC_BUG
@@ -278,6 +320,9 @@
*/
{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_erase_chip, NULL },
{ CFI_MFR_ATMEL, AT49BV6416, fixup_use_atmel_lock, NULL },
+#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
+ { MANUFACTURER_MACRONIX, CFI_ID_ANY, fixup_macronix_bootloc, NULL, },
+#endif
{ 0, 0, NULL, NULL }
};
--- a/drivers/mtd/chips/Kconfig
+++ b/drivers/mtd/chips/Kconfig
@@ -196,6 +196,14 @@
provides support for one of those command sets, used on chips
including the AMD Am29LV320.
+config MTD_CFI_FIXUP_MACRONIX_BOOTLOC
+ bool "Fix boot-block location for Macronix flash chips"
+ depends on MTD_CFI_AMDSTD
+ help
+ Some Macronix flash chips have no/wrong boot-block location in the
+ CFI table, and the driver may detect the type incorrectly. Select
+ this if your board has such chip.
+
config MTD_CFI_STAA
tristate "Support for ST (Advanced Architecture) flash chips"
depends on MTD_GEN_PROBE

68
target/linux/adm5120/patches-2.6.26/102-jedec_pmc_39lvxxx_chips.patch Normal file
View File

@ -0,0 +1,68 @@
--- a/drivers/mtd/chips/jedec_probe.c
+++ b/drivers/mtd/chips/jedec_probe.c
@@ -121,6 +121,10 @@
#define UPD29F064115 0x221C
/* PMC */
+#define PM39LV512 0x001B
+#define PM39LV010 0x001C
+#define PM39LV020 0x003D
+#define PM39LV040 0x003E
#define PM49FL002 0x006D
#define PM49FL004 0x006E
#define PM49FL008 0x006A
@@ -1173,6 +1177,54 @@
ERASEINFO(0x02000,2),
ERASEINFO(0x04000,1),
}
+ }, {
+ .mfr_id = MANUFACTURER_PMC,
+ .dev_id = PM39LV512,
+ .name = "PMC Pm39LV512",
+ .devtypes = CFI_DEVICETYPE_X8,
+ .uaddr = MTD_UADDR_0x0555_0x02AA,
+ .dev_size = SIZE_64KiB,
+ .cmd_set = P_ID_AMD_STD,
+ .nr_regions = 1,
+ .regions = {
+ ERASEINFO(0x01000,16),
+ }
+ }, {
+ .mfr_id = MANUFACTURER_PMC,
+ .dev_id = PM39LV010,
+ .name = "PMC Pm39LV010",
+ .devtypes = CFI_DEVICETYPE_X8,
+ .uaddr = MTD_UADDR_0x0555_0x02AA,
+ .dev_size = SIZE_128KiB,
+ .cmd_set = P_ID_AMD_STD,
+ .nr_regions = 1,
+ .regions = {
+ ERASEINFO(0x01000,32),
+ }
+ }, {
+ .mfr_id = MANUFACTURER_PMC,
+ .dev_id = PM39LV020,
+ .name = "PMC Pm39LV020",
+ .devtypes = CFI_DEVICETYPE_X8,
+ .uaddr = MTD_UADDR_0x0555_0x02AA,
+ .dev_size = SIZE_256KiB,
+ .cmd_set = P_ID_AMD_STD,
+ .nr_regions = 1,
+ .regions = {
+ ERASEINFO(0x01000,64),
+ }
+ }, {
+ .mfr_id = MANUFACTURER_PMC,
+ .dev_id = PM39LV040,
+ .name = "PMC Pm39LV040",
+ .devtypes = CFI_DEVICETYPE_X8,
+ .uaddr = MTD_UADDR_0x0555_0x02AA,
+ .dev_size = SIZE_512KiB,
+ .cmd_set = P_ID_AMD_STD,
+ .nr_regions = 1,
+ .regions = {
+ ERASEINFO(0x01000,128),
+ }
}, {
.mfr_id = MANUFACTURER_PMC,
.dev_id = PM49FL002,

24
target/linux/adm5120/patches-2.6.26/103-mtd_trxsplit.patch Normal file
View File

@ -0,0 +1,24 @@
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -57,6 +57,11 @@
depends on MTD_PARTITIONS
default y
+config MTD_TRXSPLIT
+ bool "Automatically find and split TRX partitions"
+ depends on MTD_PARTITIONS
+ default n
+
config MTD_REDBOOT_PARTS
tristate "RedBoot partition table parsing"
depends on MTD_PARTITIONS
--- a/drivers/mtd/Makefile
+++ b/drivers/mtd/Makefile
@@ -8,6 +8,7 @@
mtd-$(CONFIG_MTD_PARTITIONS) += mtdpart.o
obj-$(CONFIG_MTD_CONCAT) += mtdconcat.o
+obj-$(CONFIG_MTD_TRXSPLIT) += trxsplit.o
obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
obj-$(CONFIG_MTD_AFS_PARTS) += afs.o

28
target/linux/adm5120/patches-2.6.26/120-rb153_cf_driver.patch Normal file
View File

@ -0,0 +1,28 @@
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -72,6 +72,7 @@
obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o
obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o
obj-$(CONFIG_PATA_ICSIDE) += pata_icside.o
+obj-$(CONFIG_PATA_RB153_CF) += pata_rb153_cf.o
# Should be last but two libata driver
obj-$(CONFIG_PATA_ACPI) += pata_acpi.o
# Should be last but one libata driver
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -566,6 +566,15 @@
If unsure, say N.
+config PATA_RB153_CF
+ tristate "RouterBOARD 153 Compact Flash support"
+ depends on MIPS_ADM5120
+ help
+ This option enables support for a Compact Flash connected on
+ the RouterBOARD 153.
+
+ If unsure, say N.
+
config PATA_RB532
tristate "RouterBoard 532 PATA CompactFlash support"
depends on MIKROTIK_RB532

15
target/linux/adm5120/patches-2.6.26/140-cmdline_hack.patch Normal file
View File

@ -0,0 +1,15 @@
--- a/arch/mips/kernel/head.S
+++ b/arch/mips/kernel/head.S
@@ -126,7 +126,12 @@
/*
* Reserved space for exception handlers.
* Necessary for machines which link their kernels at KSEG0.
+ * Use as temporary storage for the kernel command line, so that it
+ * can be updated easily without having to relink the kernel.
*/
+
+EXPORT(_image_cmdline)
+ .ascii "CMDLINE:"
.fill 0x400
#endif

378
target/linux/adm5120/patches-2.6.26/200-amba_pl010_hacks.patch Normal file
View File

@ -0,0 +1,378 @@
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -52,11 +52,10 @@
#include <asm/io.h>
-#define UART_NR 8
-
#define SERIAL_AMBA_MAJOR 204
#define SERIAL_AMBA_MINOR 16
-#define SERIAL_AMBA_NR UART_NR
+#define SERIAL_AMBA_NR CONFIG_SERIAL_AMBA_PL010_NUMPORTS
+#define SERIAL_AMBA_NAME CONFIG_SERIAL_AMBA_PL010_PORTNAME
#define AMBA_ISR_PASS_LIMIT 256
@@ -82,9 +81,9 @@
struct uart_amba_port *uap = (struct uart_amba_port *)port;
unsigned int cr;
- cr = readb(uap->port.membase + UART010_CR);
+ cr = __raw_readl(uap->port.membase + UART010_CR);
cr &= ~UART010_CR_TIE;
- writel(cr, uap->port.membase + UART010_CR);
+ __raw_writel(cr, uap->port.membase + UART010_CR);
}
static void pl010_start_tx(struct uart_port *port)
@@ -92,9 +91,9 @@
struct uart_amba_port *uap = (struct uart_amba_port *)port;
unsigned int cr;
- cr = readb(uap->port.membase + UART010_CR);
+ cr = __raw_readl(uap->port.membase + UART010_CR);
cr |= UART010_CR_TIE;
- writel(cr, uap->port.membase + UART010_CR);
+ __raw_writel(cr, uap->port.membase + UART010_CR);
}
static void pl010_stop_rx(struct uart_port *port)
@@ -102,9 +101,9 @@
struct uart_amba_port *uap = (struct uart_amba_port *)port;
unsigned int cr;
- cr = readb(uap->port.membase + UART010_CR);
+ cr = __raw_readl(uap->port.membase + UART010_CR);
cr &= ~(UART010_CR_RIE | UART010_CR_RTIE);
- writel(cr, uap->port.membase + UART010_CR);
+ __raw_writel(cr, uap->port.membase + UART010_CR);
}
static void pl010_enable_ms(struct uart_port *port)
@@ -112,9 +111,9 @@
struct uart_amba_port *uap = (struct uart_amba_port *)port;
unsigned int cr;
- cr = readb(uap->port.membase + UART010_CR);
+ cr = __raw_readl(uap->port.membase + UART010_CR);
cr |= UART010_CR_MSIE;
- writel(cr, uap->port.membase + UART010_CR);
+ __raw_writel(cr, uap->port.membase + UART010_CR);
}
static void pl010_rx_chars(struct uart_amba_port *uap)
@@ -122,9 +121,9 @@
struct tty_struct *tty = uap->port.info->tty;
unsigned int status, ch, flag, rsr, max_count = 256;
- status = readb(uap->port.membase + UART01x_FR);
+ status = __raw_readl(uap->port.membase + UART01x_FR);
while (UART_RX_DATA(status) && max_count--) {
- ch = readb(uap->port.membase + UART01x_DR);
+ ch = __raw_readl(uap->port.membase + UART01x_DR);
flag = TTY_NORMAL;
uap->port.icount.rx++;
@@ -133,9 +132,9 @@
* Note that the error handling code is
* out of the main execution path
*/
- rsr = readb(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
+ rsr = __raw_readl(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
if (unlikely(rsr & UART01x_RSR_ANY)) {
- writel(0, uap->port.membase + UART01x_ECR);
+ __raw_writel(0, uap->port.membase + UART01x_ECR);
if (rsr & UART01x_RSR_BE) {
rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE);
@@ -165,7 +164,7 @@
uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag);
ignore_char:
- status = readb(uap->port.membase + UART01x_FR);
+ status = __raw_readl(uap->port.membase + UART01x_FR);
}
spin_unlock(&uap->port.lock);
tty_flip_buffer_push(tty);
@@ -178,7 +177,7 @@
int count;
if (uap->port.x_char) {
- writel(uap->port.x_char, uap->port.membase + UART01x_DR);
+ __raw_writel(uap->port.x_char, uap->port.membase + UART01x_DR);
uap->port.icount.tx++;
uap->port.x_char = 0;
return;
@@ -190,7 +189,7 @@
count = uap->port.fifosize >> 1;
do {
- writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR);
+ __raw_writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR);
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
uap->port.icount.tx++;
if (uart_circ_empty(xmit))
@@ -208,9 +207,9 @@
{
unsigned int status, delta;
- writel(0, uap->port.membase + UART010_ICR);
+ __raw_writel(0, uap->port.membase + UART010_ICR);
- status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
+ status = __raw_readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
delta = status ^ uap->old_status;
uap->old_status = status;
@@ -238,7 +237,7 @@
spin_lock(&uap->port.lock);
- status = readb(uap->port.membase + UART010_IIR);
+ status = __raw_readl(uap->port.membase + UART010_IIR);
if (status) {
do {
if (status & (UART010_IIR_RTIS | UART010_IIR_RIS))
@@ -251,7 +250,7 @@
if (pass_counter-- == 0)
break;
- status = readb(uap->port.membase + UART010_IIR);
+ status = __raw_readl(uap->port.membase + UART010_IIR);
} while (status & (UART010_IIR_RTIS | UART010_IIR_RIS |
UART010_IIR_TIS));
handled = 1;
@@ -265,7 +264,7 @@
static unsigned int pl010_tx_empty(struct uart_port *port)
{
struct uart_amba_port *uap = (struct uart_amba_port *)port;
- unsigned int status = readb(uap->port.membase + UART01x_FR);
+ unsigned int status = __raw_readl(uap->port.membase + UART01x_FR);
return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT;
}
@@ -275,7 +274,7 @@
unsigned int result = 0;
unsigned int status;
- status = readb(uap->port.membase + UART01x_FR);
+ status = __raw_readl(uap->port.membase + UART01x_FR);
if (status & UART01x_FR_DCD)
result |= TIOCM_CAR;
if (status & UART01x_FR_DSR)
@@ -301,12 +300,12 @@
unsigned int lcr_h;
spin_lock_irqsave(&uap->port.lock, flags);
- lcr_h = readb(uap->port.membase + UART010_LCRH);
+ lcr_h = __raw_readl(uap->port.membase + UART010_LCRH);
if (break_state == -1)
lcr_h |= UART01x_LCRH_BRK;
else
lcr_h &= ~UART01x_LCRH_BRK;
- writel(lcr_h, uap->port.membase + UART010_LCRH);
+ __raw_writel(lcr_h, uap->port.membase + UART010_LCRH);
spin_unlock_irqrestore(&uap->port.lock, flags);
}
@@ -334,12 +333,12 @@
/*
* initialise the old status of the modem signals
*/
- uap->old_status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
+ uap->old_status = __raw_readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
/*
* Finally, enable interrupts
*/
- writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE,
+ __raw_writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE,
uap->port.membase + UART010_CR);
return 0;
@@ -362,10 +361,10 @@
/*
* disable all interrupts, disable the port
*/
- writel(0, uap->port.membase + UART010_CR);
+ __raw_writel(0, uap->port.membase + UART010_CR);
/* disable break condition and fifos */
- writel(readb(uap->port.membase + UART010_LCRH) &
+ __raw_writel(__raw_readl(uap->port.membase + UART010_LCRH) &
~(UART01x_LCRH_BRK | UART01x_LCRH_FEN),
uap->port.membase + UART010_LCRH);
@@ -387,7 +386,7 @@
/*
* Ask the core to calculate the divisor for us.
*/
- baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16);
+ baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16);
quot = uart_get_divisor(port, baud);
switch (termios->c_cflag & CSIZE) {
@@ -450,25 +449,25 @@
uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX;
/* first, disable everything */
- old_cr = readb(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
+ old_cr = __raw_readl(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
if (UART_ENABLE_MS(port, termios->c_cflag))
old_cr |= UART010_CR_MSIE;
- writel(0, uap->port.membase + UART010_CR);
+ __raw_writel(0, uap->port.membase + UART010_CR);
/* Set baud rate */
quot -= 1;
- writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM);
- writel(quot & 0xff, uap->port.membase + UART010_LCRL);
+ __raw_writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM);
+ __raw_writel(quot & 0xff, uap->port.membase + UART010_LCRL);
/*
* ----------v----------v----------v----------v-----
* NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L
* ----------^----------^----------^----------^-----
*/
- writel(lcr_h, uap->port.membase + UART010_LCRH);
- writel(old_cr, uap->port.membase + UART010_CR);
+ __raw_writel(lcr_h, uap->port.membase + UART010_LCRH);
+ __raw_writel(old_cr, uap->port.membase + UART010_CR);
spin_unlock_irqrestore(&uap->port.lock, flags);
}
@@ -540,7 +539,7 @@
.verify_port = pl010_verify_port,
};
-static struct uart_amba_port *amba_ports[UART_NR];
+static struct uart_amba_port *amba_ports[SERIAL_AMBA_NR];
#ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE
@@ -550,10 +549,10 @@
unsigned int status;
do {
- status = readb(uap->port.membase + UART01x_FR);
+ status = __raw_readl(uap->port.membase + UART01x_FR);
barrier();
} while (!UART_TX_READY(status));
- writel(ch, uap->port.membase + UART01x_DR);
+ __raw_writel(ch, uap->port.membase + UART01x_DR);
}
static void
@@ -567,8 +566,8 @@
/*
* First save the CR then disable the interrupts
*/
- old_cr = readb(uap->port.membase + UART010_CR);
- writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
+ old_cr = __raw_readl(uap->port.membase + UART010_CR);
+ __raw_writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
uart_console_write(&uap->port, s, count, pl010_console_putchar);
@@ -577,10 +576,10 @@
* and restore the TCR
*/
do {
- status = readb(uap->port.membase + UART01x_FR);
+ status = __raw_readl(uap->port.membase + UART01x_FR);
barrier();
} while (status & UART01x_FR_BUSY);
- writel(old_cr, uap->port.membase + UART010_CR);
+ __raw_writel(old_cr, uap->port.membase + UART010_CR);
clk_disable(uap->clk);
}
@@ -589,9 +588,9 @@
pl010_console_get_options(struct uart_amba_port *uap, int *baud,
int *parity, int *bits)
{
- if (readb(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) {
+ if (__raw_readl(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) {
unsigned int lcr_h, quot;
- lcr_h = readb(uap->port.membase + UART010_LCRH);
+ lcr_h = __raw_readl(uap->port.membase + UART010_LCRH);
*parity = 'n';
if (lcr_h & UART01x_LCRH_PEN) {
@@ -606,8 +605,8 @@
else
*bits = 8;
- quot = readb(uap->port.membase + UART010_LCRL) |
- readb(uap->port.membase + UART010_LCRM) << 8;
+ quot = __raw_readl(uap->port.membase + UART010_LCRL) |
+ __raw_readl(uap->port.membase + UART010_LCRM) << 8;
*baud = uap->port.uartclk / (16 * (quot + 1));
}
}
@@ -625,7 +624,7 @@
* if so, search for the first available port that does have
* console support.
*/
- if (co->index >= UART_NR)
+ if (co->index >= SERIAL_AMBA_NR)
co->index = 0;
uap = amba_ports[co->index];
if (!uap)
@@ -643,7 +642,7 @@
static struct uart_driver amba_reg;
static struct console amba_console = {
- .name = "ttyAM",
+ .name = SERIAL_AMBA_NAME,
.write = pl010_console_write,
.device = uart_console_device,
.setup = pl010_console_setup,
@@ -659,11 +658,11 @@
static struct uart_driver amba_reg = {
.owner = THIS_MODULE,
- .driver_name = "ttyAM",
- .dev_name = "ttyAM",
+ .driver_name = SERIAL_AMBA_NAME,
+ .dev_name = SERIAL_AMBA_NAME,
.major = SERIAL_AMBA_MAJOR,
.minor = SERIAL_AMBA_MINOR,
- .nr = UART_NR,
+ .nr = SERIAL_AMBA_NR,
.cons = AMBA_CONSOLE,
};
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -287,10 +287,25 @@
help
This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have
an Integrator/AP or Integrator/PP2 platform, or if you have a
- Cirrus Logic EP93xx CPU, say Y or M here.
+ Cirrus Logic EP93xx CPU or an Infineon ADM5120 SOC, say Y or M here.
If unsure, say N.
+config SERIAL_AMBA_PL010_NUMPORTS
+ int "Maximum number of AMBA PL010 serial ports"
+ depends on SERIAL_AMBA_PL010
+ default "8"
+ ---help---
+ Set this to the number of serial ports you want the AMBA PL010 driver
+ to support.
+
+config SERIAL_AMBA_PL010_PORTNAME
+ string "Name of the AMBA PL010 serial ports"
+ depends on SERIAL_AMBA_PL010
+ default "ttyAM"
+ ---help---
+ ::: To be written :::
+
config SERIAL_AMBA_PL010_CONSOLE
bool "Support for console on AMBA serial port"
depends on SERIAL_AMBA_PL010=y

13
target/linux/adm5120/patches-2.6.26/201-amba_bus_hacks.patch Normal file
View File

@ -0,0 +1,13 @@
--- a/drivers/amba/bus.c
+++ b/drivers/amba/bus.c
@@ -17,6 +17,10 @@
#include <asm/io.h>
#include <asm/sizes.h>
+#ifndef NO_IRQ
+#define NO_IRQ (-1)
+#endif
+
#define to_amba_device(d) container_of(d, struct amba_device, dev)
#define to_amba_driver(d) container_of(d, struct amba_driver, drv)

46
target/linux/adm5120/patches-2.6.26/202-pci_disable_common_quirks.patch Normal file
View File

@ -0,0 +1,46 @@
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -42,6 +42,12 @@
When in doubt, say N.
+config PCI_DISABLE_COMMON_QUIRKS
+ bool "PCI disable common quirks"
+ depends on PCI
+ help
+ If you don't know what to do here, say N.
+
config HT_IRQ
bool "Interrupts on hypertransport devices"
default y
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -24,6 +24,7 @@
#include <linux/kallsyms.h>
#include "pci.h"
+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
/* The Mellanox Tavor device gives false positive parity errors
* Mark this device with a broken_parity_status, to allow
* PCI scanning code to "skip" this now blacklisted device.
@@ -1495,6 +1496,7 @@
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810);
+#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */
static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, struct pci_fixup *end)
{
@@ -1561,6 +1563,7 @@
}
EXPORT_SYMBOL(pci_fixup_device);
+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
/* Enable 1k I/O space granularity on the Intel P64H2 */
static void __devinit quirk_p64h2_1k_io(struct pci_dev *dev)
{
@@ -1929,3 +1932,4 @@
quirk_msi_intx_disable_bug);
#endif /* CONFIG_PCI_MSI */
+#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */

27
target/linux/adm5120/patches-2.6.26/203-gpio_leds_brightness.patch Normal file
View File

@ -0,0 +1,27 @@
--- a/drivers/leds/leds-gpio.c
+++ b/drivers/leds/leds-gpio.c
@@ -43,13 +43,17 @@
container_of(led_cdev, struct gpio_led_data, cdev);
int level;
- if (value == LED_OFF)
- level = 0;
- else
- level = 1;
-
- if (led_dat->active_low)
- level = !level;
+ switch (value) {
+ case LED_OFF:
+ level = led_dat->active_low ? 1 : 0;
+ break;
+ case LED_FULL:
+ level = led_dat->active_low ? 0 : 1;
+ break;
+ default:
+ level = value;
+ break;
+ }
/* Setting GPIOs with I2C/etc requires a task context, and we don't
* seem to have a reliable way to know if we're already in one; so

31
target/linux/adm5120/patches-2.6.26/310-adm5120_wdt.patch Normal file
View File

@ -0,0 +1,31 @@
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -632,6 +632,18 @@
# MIPS Architecture
+config ADM5120_WDT
+ tristate "Infineon ADM5120 SoC hardware watchdog"
+ depends on WATCHDOG && MIPS_ADM5120
+ help
+ This is a driver for hardware watchdog integrated in Infineon
+ ADM5120 SoC. This watchdog simply watches your kernel to make sure
+ it doesn't freeze, and if it does, it reboots your computer after a
+ certain amount of time.
+
+ To compile this driver as a module, choose M here: the module will be
+ called adm5120_wdt.
+
config INDYDOG
tristate "Indy/I2 Hardware Watchdog"
depends on SGI_HAS_INDYDOG
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -91,6 +91,7 @@
# M68KNOMMU Architecture
# MIPS Architecture
+obj-$(CONFIG_ADM5120_WDT) += adm5120_wdt.o
obj-$(CONFIG_INDYDOG) += indydog.o
obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o

294
target/linux/adm5120/router_be/config-2.6.26 Normal file
View File

@ -0,0 +1,294 @@
CONFIG_32BIT=y
# CONFIG_64BIT is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_ADM5120_CPU_OVERRIDES=y
CONFIG_ADM5120_WDT=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARM_AMBA=y
CONFIG_BASE_SMALL=0
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
# CONFIG_BCM47XX is not set
CONFIG_BINFMT_MISC=m
CONFIG_BITREVERSE=y
CONFIG_CEVT_R4K=y
CONFIG_CIFS_DEBUG2=y
CONFIG_CIFS_EXPERIMENTAL=y
CONFIG_CIFS_STATS2=y
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_XATTR=y
CONFIG_CLASSIC_RCU=y
CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,jffs2 init=/etc/preinit"
CONFIG_CPU_BIG_ENDIAN=y
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_CPU_HAS_SYNC=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
# CONFIG_CPU_LOONGSON2 is not set
CONFIG_CPU_MIPS32=y
CONFIG_CPU_MIPS32_R1=y
# CONFIG_CPU_MIPS32_R2 is not set
# CONFIG_CPU_MIPS64_R1 is not set
# CONFIG_CPU_MIPS64_R2 is not set
CONFIG_CPU_MIPSR1=y
# CONFIG_CPU_NEVADA is not set
# CONFIG_CPU_R10000 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_R4300 is not set
# CONFIG_CPU_R4X00 is not set
# CONFIG_CPU_R5000 is not set
# CONFIG_CPU_R5432 is not set
# CONFIG_CPU_R6000 is not set
# CONFIG_CPU_R8000 is not set
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_TX49XX is not set
# CONFIG_CPU_VR41XX is not set
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CSRC_R4K=y
CONFIG_DEVPORT=y
# CONFIG_DM9000 is not set
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_DMA_NONCOHERENT=y
# CONFIG_E1000E_ENABLED is not set
CONFIG_EARLY_PRINTK=y
CONFIG_ELF_CORE=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_FS_MBCACHE=m
CONFIG_FS_POSIX_ACL=y
CONFIG_GENERIC_ACL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CMOS_UPDATE=y
# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_HAVE_IDE=y
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HID=m
CONFIG_HID_SUPPORT=y
CONFIG_HW_HAS_PCI=y
CONFIG_HW_RANDOM=y
CONFIG_HZ=250
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_I2C is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IDE is not set
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_INITRAMFS_SOURCE=""
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_INPUT=m
# CONFIG_INPUT_EVDEV is not set
CONFIG_IPV6_MIP6=m
# CONFIG_IPV6_MROUTE is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IRQ_CPU=y
# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_JOLIET is not set
CONFIG_LEDS_ADM5120=m
# CONFIG_LEDS_ADM5120_DIAG is not set
# CONFIG_LEDS_ADM5120_EXPERIMENTAL is not set
# CONFIG_LEDS_ALIX is not set
CONFIG_LEDS_GPIO=m
CONFIG_LEDS_TRIGGER_ADM5120_SWITCH=m
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_LEMOTE_FULONG is not set
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
# CONFIG_MACH_ALCHEMY is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MEDIA_ATTACH is not set
# CONFIG_MEMSTICK is not set
CONFIG_MII=m
# CONFIG_MINIX_FS is not set
CONFIG_MIPS=y
CONFIG_MIPS_ADM5120=y
CONFIG_MIPS_ADM5120_ENET=y
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_COBALT is not set
CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_MIPS_MALTA is not set
CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MIPS_MT_SMP is not set
# CONFIG_MIPS_MT_SMTC is not set
# CONFIG_MIPS_SEAD is not set
# CONFIG_MIPS_SIM is not set
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MTD=y
# CONFIG_MTD_ABSENT is not set
CONFIG_MTD_ADM5120=y
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_BLOCK2MTD=y
CONFIG_MTD_CFI=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_CFI_INTELEXT is not set
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_CONCAT is not set
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
CONFIG_MTD_MAP_BANK_WIDTH_2=y
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_MYLOADER_PARTS is not set
# CONFIG_MTD_ONENAND is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_PCI is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_PLATRAM is not set
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_SLRAM is not set
CONFIG_MTD_TRXSPLIT=y
# CONFIG_NET_PCI is not set
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NO_IOPORT is not set
# CONFIG_OCF_OCF is not set
CONFIG_PAGEFLAGS_EXTENDED=y
# CONFIG_PAGE_SIZE_16KB is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_64KB is not set
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_PCI=y
# CONFIG_PCIPCWATCHDOG is not set
CONFIG_PCI_ADM5120=y
CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCSPKR_PLATFORM is not set
# CONFIG_PMC_MSP is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set
CONFIG_RFKILL_LEDS=y
CONFIG_RTC_LIB=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_SCSI_WAIT_SCAN=m
# CONFIG_SERIAL_8250 is not set
CONFIG_SERIAL_AMBA_PL010=y
CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
CONFIG_SERIAL_AMBA_PL010_NUMPORTS=2
CONFIG_SERIAL_AMBA_PL010_PORTNAME="ttyS"
# CONFIG_SERIAL_AMBA_PL011 is not set
CONFIG_SERIO=y
# CONFIG_SERIO_AMBAKMI is not set
# CONFIG_SERIO_I8042 is not set
# CONFIG_SERIO_LIBPS2 is not set
# CONFIG_SERIO_PCIPS2 is not set
# CONFIG_SERIO_RAW is not set
CONFIG_SERIO_SERPORT=y
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP28 is not set
# CONFIG_SGI_IP32 is not set
# CONFIG_SIBYTE_BIGSUR is not set
# CONFIG_SIBYTE_CARMEL is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_RHONE is not set
# CONFIG_SIBYTE_SENTOSA is not set
# CONFIG_SIBYTE_SWARM is not set
CONFIG_SLABINFO=y
# CONFIG_SND_AW2 is not set
CONFIG_SOFT_WATCHDOG=m
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SSB_POSSIBLE=y
CONFIG_SWAP_IO_SPACE=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
CONFIG_TICK_ONESHOT=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_TRAD_SIGNALS=y
CONFIG_USB=m
# CONFIG_USBPCWATCHDOG is not set
CONFIG_USB_ADM5120_HCD=m
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_DEBUG=y
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_HSO=m
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_R8A66597_HCD is not set
CONFIG_USB_SERIAL_MOTOROLA=m
CONFIG_USB_SERIAL_SPCP8X5=m
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_WDM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_ALLOW_V4L1 is not set
CONFIG_VIDEO_MEDIA=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_V4L2_COMMON=m
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_XFS_DEBUG is not set
CONFIG_ZONE_DMA_FLAG=0

314
target/linux/adm5120/router_le/config-2.6.26 Normal file
View File

@ -0,0 +1,314 @@
CONFIG_32BIT=y
# CONFIG_64BIT is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_ADM5120_CPU_OVERRIDES=y
CONFIG_ADM5120_WDT=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARM_AMBA=y
CONFIG_BASE_SMALL=0
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
# CONFIG_BCM47XX is not set
CONFIG_BINFMT_MISC=m
CONFIG_BITREVERSE=y
CONFIG_CEVT_R4K=y
CONFIG_CIFS_DEBUG2=y
CONFIG_CIFS_EXPERIMENTAL=y
CONFIG_CIFS_STATS2=y
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_XATTR=y
CONFIG_CLASSIC_RCU=y
CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,yaffs2,jffs2 init=/etc/preinit"
# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_CPU_LITTLE_ENDIAN=y
# CONFIG_CPU_LOONGSON2 is not set
CONFIG_CPU_MIPS32=y
CONFIG_CPU_MIPS32_R1=y
# CONFIG_CPU_MIPS32_R2 is not set
# CONFIG_CPU_MIPS64_R1 is not set
# CONFIG_CPU_MIPS64_R2 is not set
CONFIG_CPU_MIPSR1=y
# CONFIG_CPU_NEVADA is not set
# CONFIG_CPU_R10000 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_R4300 is not set
# CONFIG_CPU_R4X00 is not set
# CONFIG_CPU_R5000 is not set
# CONFIG_CPU_R5432 is not set
# CONFIG_CPU_R6000 is not set
# CONFIG_CPU_R8000 is not set
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_TX49XX is not set
# CONFIG_CPU_VR41XX is not set
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CSRC_R4K=y
CONFIG_DEVPORT=y
# CONFIG_DM9000 is not set
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_DMA_NONCOHERENT=y
# CONFIG_E1000E_ENABLED is not set
CONFIG_EARLY_PRINTK=y
CONFIG_ELF_CORE=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_FS_MBCACHE=m
CONFIG_FS_POSIX_ACL=y
CONFIG_GENERIC_ACL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CMOS_UPDATE=y
# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_HAVE_IDE=y
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HID=m
CONFIG_HID_SUPPORT=y
CONFIG_HW_HAS_PCI=y
CONFIG_HW_RANDOM=y
CONFIG_HZ=250
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_I2C is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IDE is not set
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_INITRAMFS_SOURCE=""
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_INPUT=m
# CONFIG_INPUT_EVDEV is not set
CONFIG_IPV6_MIP6=m
# CONFIG_IPV6_MROUTE is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IRQ_CPU=y
# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_JOLIET is not set
CONFIG_LEDS_ADM5120=m
# CONFIG_LEDS_ADM5120_DIAG is not set
# CONFIG_LEDS_ADM5120_EXPERIMENTAL is not set
# CONFIG_LEDS_ALIX is not set
CONFIG_LEDS_GPIO=m
CONFIG_LEDS_TRIGGER_ADM5120_SWITCH=m
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_LEMOTE_FULONG is not set
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
# CONFIG_MACH_ALCHEMY is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MEDIA_ATTACH is not set
# CONFIG_MEMSTICK is not set
CONFIG_MII=m
# CONFIG_MINIX_FS is not set
CONFIG_MIPS=y
CONFIG_MIPS_ADM5120=y
CONFIG_MIPS_ADM5120_ENET=y
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_COBALT is not set
CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_MIPS_MALTA is not set
CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MIPS_MT_SMP is not set
# CONFIG_MIPS_MT_SMTC is not set
# CONFIG_MIPS_SEAD is not set
# CONFIG_MIPS_SIM is not set
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MTD=y
# CONFIG_MTD_ABSENT is not set
CONFIG_MTD_ADM5120=y
# CONFIG_MTD_ALAUDA is not set
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_MTD_BLOCK2MTD is not set
CONFIG_MTD_CFI=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_CFI_INTELEXT is not set
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_CONCAT is not set
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_MAP_BANK_WIDTH_1=y
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
CONFIG_MTD_MAP_BANK_WIDTH_2=y
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MTDRAM is not set
CONFIG_MTD_MYLOADER_PARTS=y
CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_CAFE is not set
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
# CONFIG_MTD_NAND_NANDSIM is not set
CONFIG_MTD_NAND_PLATFORM=y
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_ONENAND is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_PCI is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_PLATRAM is not set
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_SLRAM is not set
CONFIG_MTD_TRXSPLIT=y
# CONFIG_NETFILTER_XT_TARGET_TARPIT is not set
# CONFIG_NET_PCI is not set
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NO_IOPORT is not set
# CONFIG_OCF_OCF is not set
CONFIG_PAGEFLAGS_EXTENDED=y
# CONFIG_PAGE_SIZE_16KB is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_64KB is not set
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_PCI=y
# CONFIG_PCIPCWATCHDOG is not set
CONFIG_PCI_ADM5120=y
CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCSPKR_PLATFORM is not set
# CONFIG_PMC_MSP is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set
CONFIG_RFKILL_LEDS=y
CONFIG_RTC_LIB=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_SCSI_WAIT_SCAN=m
# CONFIG_SERIAL_8250 is not set
CONFIG_SERIAL_AMBA_PL010=y
CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
CONFIG_SERIAL_AMBA_PL010_NUMPORTS=2
CONFIG_SERIAL_AMBA_PL010_PORTNAME="ttyS"
# CONFIG_SERIAL_AMBA_PL011 is not set
CONFIG_SERIO=y
# CONFIG_SERIO_AMBAKMI is not set
# CONFIG_SERIO_I8042 is not set
# CONFIG_SERIO_LIBPS2 is not set
# CONFIG_SERIO_PCIPS2 is not set
# CONFIG_SERIO_RAW is not set
CONFIG_SERIO_SERPORT=y
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP28 is not set
# CONFIG_SGI_IP32 is not set
# CONFIG_SIBYTE_BIGSUR is not set
# CONFIG_SIBYTE_CARMEL is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_RHONE is not set
# CONFIG_SIBYTE_SENTOSA is not set
# CONFIG_SIBYTE_SWARM is not set
CONFIG_SLABINFO=y
# CONFIG_SND_AW2 is not set
CONFIG_SOFT_WATCHDOG=m
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SSB_POSSIBLE=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
CONFIG_TICK_ONESHOT=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_TRAD_SIGNALS=y
CONFIG_USB=m
# CONFIG_USBPCWATCHDOG is not set
CONFIG_USB_ADM5120_HCD=m
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_DEBUG=y
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_HSO=m
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_R8A66597_HCD is not set
CONFIG_USB_SERIAL_MOTOROLA=m
CONFIG_USB_SERIAL_SPCP8X5=m
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_WDM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_ALLOW_V4L1 is not set
CONFIG_VIDEO_MEDIA=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_V4L2_COMMON=m
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_XFS_DEBUG is not set
CONFIG_YAFFS_9BYTE_TAGS=y
# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
CONFIG_YAFFS_AUTO_YAFFS2=y
CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=0
# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
CONFIG_YAFFS_FS=y
CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
CONFIG_YAFFS_YAFFS1=y
CONFIG_YAFFS_YAFFS2=y
CONFIG_ZONE_DMA_FLAG=0