From 23b0137558109413a7bc5567e5e657162dd82dda Mon Sep 17 00:00:00 2001 From: Eugene Konev Date: Wed, 10 Oct 2007 06:23:39 +0000 Subject: [PATCH] switch ar7 to 2.6.23 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9235 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- target/linux/ar7/Makefile | 2 +- target/linux/ar7/config-2.6.22 | 187 ------------------ .../patches-2.6.22/100-board_support.patch | 90 --------- .../linux/ar7/patches-2.6.22/110-flash.patch | 40 ---- .../ar7/patches-2.6.22/120-gpio_chrdev.patch | 30 --- .../linux/ar7/patches-2.6.22/130-leds.patch | 27 --- .../linux/ar7/patches-2.6.22/130-vlynq.patch | 20 -- .../ar7/patches-2.6.22/140-watchdog.patch | 27 --- .../patches-2.6.22/200-ethernet_driver.patch | 30 --- .../ar7/patches-2.6.22/210-phy_fixed.patch | 93 --------- .../patches-2.6.22/500-serial_kludge.patch | 54 ----- .../patches-2.6.23/200-ethernet_driver.patch | 14 +- 12 files changed, 8 insertions(+), 606 deletions(-) delete mode 100644 target/linux/ar7/config-2.6.22 delete mode 100644 target/linux/ar7/patches-2.6.22/100-board_support.patch delete mode 100644 target/linux/ar7/patches-2.6.22/110-flash.patch delete mode 100644 target/linux/ar7/patches-2.6.22/120-gpio_chrdev.patch delete mode 100644 target/linux/ar7/patches-2.6.22/130-leds.patch delete mode 100644 target/linux/ar7/patches-2.6.22/130-vlynq.patch delete mode 100644 target/linux/ar7/patches-2.6.22/140-watchdog.patch delete mode 100644 target/linux/ar7/patches-2.6.22/200-ethernet_driver.patch delete mode 100644 target/linux/ar7/patches-2.6.22/210-phy_fixed.patch delete mode 100644 target/linux/ar7/patches-2.6.22/500-serial_kludge.patch diff --git a/target/linux/ar7/Makefile b/target/linux/ar7/Makefile index a355356dd0..02daa379ee 100644 --- a/target/linux/ar7/Makefile +++ b/target/linux/ar7/Makefile @@ -11,7 +11,7 @@ BOARD:=ar7 BOARDNAME:=TI AR7 FEATURES:=squashfs jffs2 atm -LINUX_VERSION:=2.6.22.4 +LINUX_VERSION:=2.6.23 include $(INCLUDE_DIR)/target.mk diff --git a/target/linux/ar7/config-2.6.22 b/target/linux/ar7/config-2.6.22 deleted file mode 100644 index 07c6afbe73..0000000000 --- a/target/linux/ar7/config-2.6.22 +++ /dev/null @@ -1,187 +0,0 @@ -CONFIG_32BIT=y -# CONFIG_64BIT is not set -# CONFIG_64BIT_PHYS_ADDR is not set -CONFIG_AR7=y -CONFIG_AR7_GPIO=y -CONFIG_AR7_WDT=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set -CONFIG_ATM_DRIVERS=y -CONFIG_BASE_SMALL=0 -CONFIG_BITREVERSE=y -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_BOOT_ELF32=y -# CONFIG_BROADCOM_PHY is not set -# CONFIG_BT is not set -CONFIG_CMDLINE="init=/etc/preinit rootfstype=squashfs,jffs2," -CONFIG_CPMAC=y -# CONFIG_CPU_BIG_ENDIAN is not set -CONFIG_CPU_HAS_LLSC=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_CPU_MIPS32=y -CONFIG_CPU_MIPS32_R1=y -# CONFIG_CPU_MIPS32_R2 is not set -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -CONFIG_CPU_MIPSR1=y -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_RM7000 is not set -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_TX49XX is not set -# CONFIG_CPU_VR41XX is not set -# CONFIG_DDB5477 is not set -# CONFIG_DM9000 is not set -CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_EARLY_PRINTK=y -CONFIG_FIXED_MII_100_FDX=y -# CONFIG_FIXED_MII_10_FDX is not set -CONFIG_FIXED_PHY=y -CONFIG_FS_POSIX_ACL=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y -# CONFIG_GEN_RTC is not set -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HW_RANDOM=y -# CONFIG_I2C is not set -# CONFIG_IDE is not set -CONFIG_IRQ_CPU=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_LEDS_AR7=y -# CONFIG_MACH_ALCHEMY is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MACH_JAZZ is not set -# CONFIG_MACH_VR41XX is not set -CONFIG_MIPS=y -# CONFIG_MIPS_ATLAS is not set -# CONFIG_MIPS_COBALT is not set -# CONFIG_MIPS_EV64120 is not set -CONFIG_MIPS_L1_CACHE_SHIFT=5 -# CONFIG_MIPS_MALTA is not set -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_SEAD is not set -# CONFIG_MIPS_SIM is not set -# CONFIG_MIPS_VPE_LOADER is not set -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set -CONFIG_MTD=y -# CONFIG_MTD_ABSENT is not set -CONFIG_MTD_AR7_PARTS=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_MTD_BLOCK2MTD is not set -CONFIG_MTD_CFI=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_CFI_STAA=y -CONFIG_MTD_CFI_UTIL=y -CONFIG_MTD_CHAR=y -# CONFIG_MTD_CMDLINE_PARTS is not set -CONFIG_MTD_COMPLEX_MAPPINGS=y -# CONFIG_MTD_CONCAT is not set -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -CONFIG_MTD_MAP_BANK_WIDTH_2=y -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_ONENAND is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_PHRAM is not set -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -CONFIG_MTD_PHYSMAP_LEN=0 -CONFIG_MTD_PHYSMAP_START=0x10000000 -# CONFIG_MTD_PLATRAM is not set -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_NETDEV_1000 is not set -CONFIG_NET_SCH_FIFO=y -CONFIG_NF_CT_PROTO_GRE=m -CONFIG_NF_NAT_PROTO_GRE=m -# CONFIG_PAGE_SIZE_16KB is not set -CONFIG_PAGE_SIZE_4KB=y -# CONFIG_PAGE_SIZE_64KB is not set -# CONFIG_PAGE_SIZE_8KB is not set -CONFIG_PHYLIB=y -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_PNPACPI is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -# CONFIG_QSEMI_PHY is not set -# CONFIG_RTC is not set -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_SCSI_WAIT_SCAN=m -# CONFIG_SERIAL_8250_EXTENDED is not set -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_PTSWARM is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SMSC_PHY is not set -# CONFIG_SOFT_WATCHDOG is not set -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SWAP_IO_SPACE=y -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -CONFIG_SYS_SUPPORTS_KGDB=y -CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TOSHIBA_RBTX4938 is not set -CONFIG_TRAD_SIGNALS=y -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_VGASTATE is not set -CONFIG_VLYNQ=y -CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/ar7/patches-2.6.22/100-board_support.patch b/target/linux/ar7/patches-2.6.22/100-board_support.patch deleted file mode 100644 index 59fafa55a0..0000000000 --- a/target/linux/ar7/patches-2.6.22/100-board_support.patch +++ /dev/null @@ -1,90 +0,0 @@ -diff -urN linux-2.6.22/arch/mips/Kconfig linux-2.6.22.new/arch/mips/Kconfig ---- linux-2.6.22/arch/mips/Kconfig 2007-07-09 01:32:17.000000000 +0200 -+++ linux-2.6.22.new/arch/mips/Kconfig 2007-07-11 02:34:51.000000000 +0200 -@@ -15,6 +15,21 @@ - prompt "System type" - default SGI_IP22 - -+config AR7 -+ bool "Texas Instruments AR7" -+ select BOOT_ELF32 -+ select DMA_NONCOHERENT -+ select IRQ_CPU -+ select SWAP_IO_SPACE -+ select SYS_HAS_CPU_MIPS32_R1 -+ select SYS_HAS_EARLY_PRINTK -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select SYS_SUPPORTS_KGDB -+ select SYS_SUPPORTS_LITTLE_ENDIAN -+ select SYS_SUPPORTS_BIG_ENDIAN -+ select GENERIC_GPIO -+ select GENERIC_HARDIRQS_NO__DO_IRQ -+ - config MACH_ALCHEMY - bool "Alchemy processor based machines" - -diff -urN linux-2.6.22/arch/mips/kernel/traps.c linux-2.6.22.new/arch/mips/kernel/traps.c ---- linux-2.6.22/arch/mips/kernel/traps.c 2007-07-09 01:32:17.000000000 +0200 -+++ linux-2.6.22.new/arch/mips/kernel/traps.c 2007-07-11 02:32:39.000000000 +0200 -@@ -1074,11 +1074,23 @@ void *set_except_vector(int n, void *addr) - unsigned long old_handler = exception_handlers[n]; - - exception_handlers[n] = handler; -- if (n == 0 && cpu_has_divec) { -- *(volatile u32 *)(ebase + 0x200) = 0x08000000 | -- (0x03ffffff & (handler >> 2)); -- flush_icache_range(ebase + 0x200, ebase + 0x204); -- } -+ if (n == 0 && cpu_has_divec) -+ if ((handler ^ (ebase + 4)) & 0xfc000000) { -+ /* lui k0, 0x0000 */ -+ *(u32 *)(ebase + 0x200) = 0x3c1a0000 | (handler >> 16); -+ /* ori k0, 0x0000 */ -+ *(u32 *)(ebase + 0x204) = -+ 0x375a0000 | (handler & 0xffff); -+ /* jr k0 */ -+ *(u32 *)(ebase + 0x208) = 0x03400008; -+ /* nop */ -+ *(u32 *)(ebase + 0x20C) = 0x00000000; -+ flush_icache_range(ebase + 0x200, ebase + 0x210); -+ } else { -+ *(volatile u32 *)(ebase + 0x200) = -+ 0x08000000 | (0x03ffffff & (handler >> 2)); -+ flush_icache_range(ebase + 0x200, ebase + 0x204); -+ } - return (void *)old_handler; - } - -diff -urN linux-2.6.22/arch/mips/Makefile linux-2.6.22.new/arch/mips/Makefile ---- linux-2.6.22/arch/mips/Makefile 2007-07-09 01:32:17.000000000 +0200 -+++ linux-2.6.22.new/arch/mips/Makefile 2007-07-11 02:32:39.000000000 +0200 -@@ -158,6 +158,13 @@ - # - - # -+# Texas Instruments AR7 -+# -+core-$(CONFIG_AR7) += arch/mips/ar7/ -+cflags-$(CONFIG_AR7) += -Iinclude/asm-mips/ar7 -+load-$(CONFIG_AR7) += 0xffffffff94100000 -+ -+# - # Acer PICA 61, Mips Magnum 4000 and Olivetti M700. - # - core-$(CONFIG_MACH_JAZZ) += arch/mips/jazz/ -diff -urN linux-2.6.22.4/include/asm-mips/page.h linux-2.6.22.4.new/include/asm-mips/page.h ---- linux-2.6.22.4/include/asm-mips/page.h 2007-08-21 12:33:06.000000000 +0800 -+++ linux-2.6.22.4.new/include/asm-mips/page.h 2007-09-13 15:13:00.000000000 +0800 -@@ -187,8 +187,10 @@ - #define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \ - VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) - --#define UNCAC_ADDR(addr) ((addr) - PAGE_OFFSET + UNCAC_BASE) --#define CAC_ADDR(addr) ((addr) - UNCAC_BASE + PAGE_OFFSET) -+#define UNCAC_ADDR(addr) ((addr) - PAGE_OFFSET + UNCAC_BASE + \ -+ PHYS_OFFSET) -+#define CAC_ADDR(addr) ((addr) - UNCAC_BASE + PAGE_OFFSET - \ -+ PHYS_OFFSET) - - #include - #include diff --git a/target/linux/ar7/patches-2.6.22/110-flash.patch b/target/linux/ar7/patches-2.6.22/110-flash.patch deleted file mode 100644 index 6edc353e92..0000000000 --- a/target/linux/ar7/patches-2.6.22/110-flash.patch +++ /dev/null @@ -1,40 +0,0 @@ -diff -Nru linux-2.6.19.2/drivers/mtd/Kconfig linux-ar7/drivers/mtd/Kconfig ---- linux-2.6.19.2/drivers/mtd/Kconfig 2006-12-12 02:32:53.000000000 +0700 -+++ linux-ar7/drivers/mtd/Kconfig 2007-02-03 22:47:10.000000000 +0700 -@@ -152,6 +152,12 @@ - for your particular device. It won't happen automatically. The - 'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example. - -+config MTD_AR7_PARTS -+ tristate "TI AR7 partitioning support" -+ depends on MTD_PARTITIONS -+ ---help--- -+ TI AR7 partitioning support -+ - comment "User Modules And Translation Layers" - depends on MTD - -diff -Nru linux-2.6.19.2/drivers/mtd/Makefile linux-ar7/drivers/mtd/Makefile ---- linux-2.6.19.2/drivers/mtd/Makefile 2006-12-12 02:32:53.000000000 +0700 -+++ linux-ar7/drivers/mtd/Makefile 2007-02-03 22:02:27.000000000 +0700 -@@ -12,6 +12,7 @@ - obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o - obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o - obj-$(CONFIG_MTD_AFS_PARTS) += afs.o -+obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o - - # 'Users' - code which presents functionality to userspace. - obj-$(CONFIG_MTD_CHAR) += mtdchar.o -diff -Nru linux-2.6.19.2/drivers/mtd/maps/physmap.c linux-ar7/drivers/mtd/maps/physmap.c ---- linux-2.6.19.2/drivers/mtd/maps/physmap.c 2006-12-12 02:32:53.000000000 +0700 -+++ linux-ar7/drivers/mtd/maps/physmap.c 2007-02-03 21:57:11.000000000 +0700 -@@ -74,7 +74,8 @@ - - static const char *rom_probe_types[] = { "cfi_probe", "jedec_probe", "map_rom", NULL }; - #ifdef CONFIG_MTD_PARTITIONS --static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL }; -+static const char *part_probe_types[] = {"cmdlinepart", "RedBoot", -+ "ar7part", NULL }; - #endif - - static int physmap_flash_probe(struct platform_device *dev) diff --git a/target/linux/ar7/patches-2.6.22/120-gpio_chrdev.patch b/target/linux/ar7/patches-2.6.22/120-gpio_chrdev.patch deleted file mode 100644 index 41a8b8e02f..0000000000 --- a/target/linux/ar7/patches-2.6.22/120-gpio_chrdev.patch +++ /dev/null @@ -1,30 +0,0 @@ -diff -ruN linux-2.6.19.2-orig/drivers/char/Kconfig linux-2.6.19.2-ar7/drivers/char/Kconfig ---- linux-2.6.19.2-orig/drivers/char/Kconfig 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-ar7/drivers/char/Kconfig 2007-02-19 01:22:23.000000000 +0100 -@@ -920,6 +920,15 @@ - To compile this driver as a module, choose M here: the - module will be called mwave. - -+config AR7_GPIO -+ tristate "TI AR7 GPIO Support" -+ depends on AR7 -+ help -+ Give userspace access to the GPIO pins on the Texas Instruments AR7 -+ processors. -+ -+ If compiled as a module, it will be called ar7_gpio. -+ - config SCx200_GPIO - tristate "NatSemi SCx200 GPIO Support" - depends on SCx200 -diff -ruN linux-2.6.19.2-orig/drivers/char/Makefile linux-2.6.19.2-ar7/drivers/char/Makefile ---- linux-2.6.19.2-orig/drivers/char/Makefile 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-ar7/drivers/char/Makefile 2007-02-19 01:22:23.000000000 +0100 -@@ -83,6 +83,7 @@ - obj-$(CONFIG_PPDEV) += ppdev.o - obj-$(CONFIG_NWBUTTON) += nwbutton.o - obj-$(CONFIG_NWFLASH) += nwflash.o -+obj-$(CONFIG_AR7_GPIO) += ar7_gpio.o - obj-$(CONFIG_SCx200_GPIO) += scx200_gpio.o - obj-$(CONFIG_PC8736x_GPIO) += pc8736x_gpio.o - obj-$(CONFIG_NSC_GPIO) += nsc_gpio.o diff --git a/target/linux/ar7/patches-2.6.22/130-leds.patch b/target/linux/ar7/patches-2.6.22/130-leds.patch deleted file mode 100644 index 261b712196..0000000000 --- a/target/linux/ar7/patches-2.6.22/130-leds.patch +++ /dev/null @@ -1,27 +0,0 @@ -diff -ruN linux-2.6.19.2-orig/drivers/leds/Kconfig linux-2.6.19.2-ar7/drivers/leds/Kconfig ---- linux-2.6.19.2-orig/drivers/leds/Kconfig 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-ar7/drivers/leds/Kconfig 2007-02-24 02:30:48.000000000 +0100 -@@ -19,6 +19,12 @@ - - comment "LED drivers" - -+config LEDS_AR7 -+ tristate "LED Support for the TI AR7" -+ depends LEDS_CLASS && AR7 -+ help -+ This option enables support for the LEDs on TI AR7. -+ - config LEDS_CORGI - tristate "LED Support for the Sharp SL-C7x0 series" - depends LEDS_CLASS && PXA_SHARP_C7xx -diff -ruN linux-2.6.19.2-orig/drivers/leds/Makefile linux-2.6.19.2-ar7/drivers/leds/Makefile ---- linux-2.6.19.2-orig/drivers/leds/Makefile 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-ar7/drivers/leds/Makefile 2007-02-24 02:29:44.000000000 +0100 -@@ -5,6 +5,7 @@ - obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o - - # LED Platform Drivers -+obj-$(CONFIG_LEDS_AR7) += leds-ar7.o - obj-$(CONFIG_LEDS_CORGI) += leds-corgi.o - obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o - obj-$(CONFIG_LEDS_SPITZ) += leds-spitz.o diff --git a/target/linux/ar7/patches-2.6.22/130-vlynq.patch b/target/linux/ar7/patches-2.6.22/130-vlynq.patch deleted file mode 100644 index 2e8dea3ed9..0000000000 --- a/target/linux/ar7/patches-2.6.22/130-vlynq.patch +++ /dev/null @@ -1,20 +0,0 @@ -Index: linux-2.6.22.4/drivers/Kconfig -=================================================================== ---- linux-2.6.22.4.orig/drivers/Kconfig 2007-10-06 01:09:43.000000000 +0800 -+++ linux-2.6.22.4/drivers/Kconfig 2007-10-06 01:12:19.000000000 +0800 -@@ -84,4 +84,6 @@ - - source "drivers/kvm/Kconfig" - -+source "drivers/vlynq/Kconfig" -+ - endmenu -Index: linux-2.6.22.4/drivers/Makefile -=================================================================== ---- linux-2.6.22.4.orig/drivers/Makefile 2007-10-06 01:09:43.000000000 +0800 -+++ linux-2.6.22.4/drivers/Makefile 2007-10-06 01:12:37.000000000 +0800 -@@ -81,3 +81,4 @@ - obj-$(CONFIG_DMA_ENGINE) += dma/ - obj-$(CONFIG_HID) += hid/ - obj-$(CONFIG_PPC_PS3) += ps3/ -+obj-$(CONFIG_VLYNQ) += vlynq/ diff --git a/target/linux/ar7/patches-2.6.22/140-watchdog.patch b/target/linux/ar7/patches-2.6.22/140-watchdog.patch deleted file mode 100644 index 163df40ba6..0000000000 --- a/target/linux/ar7/patches-2.6.22/140-watchdog.patch +++ /dev/null @@ -1,27 +0,0 @@ -diff -ruN linux-2.6.19.2-orig/drivers/char/watchdog/Kconfig linux-2.6.19.2-ar7/drivers/char/watchdog/Kconfig ---- linux-2.6.19.2-orig/drivers/char/watchdog/Kconfig 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-ar7/drivers/char/watchdog/Kconfig 2007-02-26 12:49:29.000000000 +0100 -@@ -544,6 +544,12 @@ - - # MIPS Architecture - -+config AR7_WDT -+ tristate "TI AR7 Watchdog Timer" -+ depends on WATCHDOG && AR7 -+ help -+ Hardware driver for the TI AR7 Watchdog Timer. -+ - config INDYDOG - tristate "Indy/I2 Hardware Watchdog" - depends on WATCHDOG && SGI_IP22 -diff -ruN linux-2.6.19.2-orig/drivers/char/watchdog/Makefile linux-2.6.19.2-ar7/drivers/char/watchdog/Makefile ---- linux-2.6.19.2-orig/drivers/char/watchdog/Makefile 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-ar7/drivers/char/watchdog/Makefile 2007-02-26 12:46:36.000000000 +0100 -@@ -71,6 +71,7 @@ - obj-$(CONFIG_WATCHDOG_RTAS) += wdrtas.o - - # MIPS Architecture -+obj-$(CONFIG_AR7_WDT) += ar7_wdt.o - obj-$(CONFIG_INDYDOG) += indydog.o - - # S390 Architecture diff --git a/target/linux/ar7/patches-2.6.22/200-ethernet_driver.patch b/target/linux/ar7/patches-2.6.22/200-ethernet_driver.patch deleted file mode 100644 index 5a07d35bc5..0000000000 --- a/target/linux/ar7/patches-2.6.22/200-ethernet_driver.patch +++ /dev/null @@ -1,30 +0,0 @@ -diff -Nru linux-2.6.19.2/drivers/net/Kconfig linux-ar7/drivers/net/Kconfig ---- linux-2.6.19.2/drivers/net/Kconfig 2006-12-12 02:32:53.000000000 +0700 -+++ linux-ar7/drivers/net/Kconfig 2007-01-29 21:52:22.000000000 +0700 -@@ -1777,6 +1777,15 @@ - workstations. - See . - -+config CPMAC -+ tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)" -+ depends on EXPERIMENTAL && AR7 -+ select PHYLIB -+ select FIXED_PHY -+ select FIXED_MII_100_FDX -+ help -+ TI AR7 CPMAC Ethernet support -+ - config NET_POCKET - bool "Pocket and portable adapters" - depends on NET_ETHERNET && PARPORT -diff -Nru linux-2.6.19.2/drivers/net/Makefile linux-ar7/drivers/net/Makefile ---- linux-2.6.19.2/drivers/net/Makefile 2006-12-12 02:32:53.000000000 +0700 -+++ linux-ar7/drivers/net/Makefile 2007-01-29 21:52:22.000000000 +0700 -@@ -148,6 +148,7 @@ - obj-$(CONFIG_8139TOO) += 8139too.o - obj-$(CONFIG_ZNET) += znet.o - obj-$(CONFIG_LAN_SAA9730) += saa9730.o -+obj-$(CONFIG_CPMAC) += cpmac.o - obj-$(CONFIG_DEPCA) += depca.o - obj-$(CONFIG_EWRK3) += ewrk3.o - obj-$(CONFIG_ATP) += atp.o diff --git a/target/linux/ar7/patches-2.6.22/210-phy_fixed.patch b/target/linux/ar7/patches-2.6.22/210-phy_fixed.patch deleted file mode 100644 index c8eceebb50..0000000000 --- a/target/linux/ar7/patches-2.6.22/210-phy_fixed.patch +++ /dev/null @@ -1,93 +0,0 @@ -Index: linux-2.6.21.4/drivers/net/phy/fixed.c -=================================================================== ---- linux-2.6.21.4.orig/drivers/net/phy/fixed.c 2007-06-11 16:30:06.418483448 +0200 -+++ linux-2.6.21.4/drivers/net/phy/fixed.c 2007-06-11 16:30:11.156763120 +0200 -@@ -187,6 +187,19 @@ - .driver = { .owner = THIS_MODULE,}, - }; - -+static void fixed_mdio_release (struct device * dev) -+{ -+ struct phy_device *phydev = container_of(dev, struct phy_device, dev); -+ struct mii_bus *bus = phydev->bus; -+ struct fixed_info *fixed = bus->priv; -+ -+ kfree(phydev); -+ kfree(bus->dev); -+ kfree(bus); -+ kfree(fixed->regs); -+ kfree(fixed); -+} -+ - /*----------------------------------------------------------------------------- - * This func is used to create all the necessary stuff, bind - * the fixed phy driver and register all it on the mdio_bus_type. -@@ -221,6 +234,12 @@ - } - - fixed->regs = kzalloc(MII_REGS_NUM*sizeof(int), GFP_KERNEL); -+ if (NULL == fixed->regs) { -+ kfree(dev); -+ kfree(new_bus); -+ kfree(fixed); -+ return -ENOMEM; -+ } - fixed->regs_num = MII_REGS_NUM; - fixed->phy_status.speed = speed; - fixed->phy_status.duplex = duplex; -@@ -249,8 +268,11 @@ - fixed->phydev = phydev; - - if(NULL == phydev) { -- err = -ENOMEM; -- goto device_create_fail; -+ kfree(dev); -+ kfree(new_bus); -+ kfree(fixed->regs); -+ kfree(fixed); -+ return -ENOMEM; - } - - phydev->irq = PHY_IGNORE_INTERRUPT; -@@ -262,8 +283,33 @@ - else - snprintf(phydev->dev.bus_id, BUS_ID_SIZE, - "fixed@%d:%d", speed, duplex); -+ - phydev->bus = new_bus; - -+#if 1 -+ phydev->dev.driver = &fixed_mdio_driver.driver; -+ phydev->dev.release = fixed_mdio_release; -+ -+ err = phydev->dev.driver->probe(&phydev->dev); -+ if(err < 0) { -+ printk(KERN_ERR "Phy %s: problems with fixed driver\n", -+ phydev->dev.bus_id); -+ kfree(phydev); -+ kfree(dev); -+ kfree(new_bus); -+ kfree(fixed->regs); -+ kfree(fixed); -+ return err; -+ } -+ -+ err = device_register(&phydev->dev); -+ if(err) { -+ printk(KERN_ERR "Phy %s failed to register\n", -+ phydev->dev.bus_id); -+ } -+ -+ return 0; -+#else - err = device_register(&phydev->dev); - if(err) { - printk(KERN_ERR "Phy %s failed to register\n", -@@ -306,6 +354,7 @@ - kfree(fixed); - - return err; -+#endif - } - - diff --git a/target/linux/ar7/patches-2.6.22/500-serial_kludge.patch b/target/linux/ar7/patches-2.6.22/500-serial_kludge.patch deleted file mode 100644 index c8f06a1440..0000000000 --- a/target/linux/ar7/patches-2.6.22/500-serial_kludge.patch +++ /dev/null @@ -1,54 +0,0 @@ -diff -urN linux-2.6.22.orig/drivers/serial/8250.c linux-2.6.22/drivers/serial/8250.c ---- linux-2.6.22.orig/drivers/serial/8250.c 2007-07-09 01:32:17.000000000 +0200 -+++ linux-2.6.22/drivers/serial/8250.c 2007-07-11 03:08:57.000000000 +0200 -@@ -258,6 +258,13 @@ - .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, - .flags = UART_CAP_FIFO, - }, -+ [PORT_AR7] = { -+ .name = "TI-AR7", -+ .fifo_size = 16, -+ .tx_loadsz = 16, -+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00, -+ .flags = UART_CAP_FIFO | UART_CAP_AFE, -+ }, - }; - - #if defined (CONFIG_SERIAL_8250_AU1X00) -@@ -2453,7 +2453,11 @@ - { - struct uart_8250_port *up = (struct uart_8250_port *)port; - -+#ifdef CONFIG_AR7 -+ wait_for_xmitr(up, BOTH_EMPTY); -+#else - wait_for_xmitr(up, UART_LSR_THRE); -+#endif - serial_out(up, UART_TX, ch); - } - -diff -urN linux-2.6.22.orig/include/linux/serial_core.h linux-2.6.22/include/linux/serial_core.h ---- linux-2.6.22.orig/include/linux/serial_core.h 2007-07-09 01:32:17.000000000 +0200 -+++ linux-2.6.22/include/linux/serial_core.h 2007-07-11 03:09:49.000000000 +0200 -@@ -40,6 +40,7 @@ - #define PORT_NS16550A 14 - #define PORT_XSCALE 15 - #define PORT_RM9000 16 /* PMC-Sierra RM9xxx internal UART */ -+#define PORT_AR7 16 - #define PORT_MAX_8250 16 /* max port ID */ - - /* -diff -urN linux-2.6.22.orig/include/linux/serialP.h linux-2.6.22/include/linux/serialP.h ---- linux-2.6.22.orig/include/linux/serialP.h 2007-07-09 01:32:17.000000000 +0200 -+++ linux-2.6.22/include/linux/serialP.h 2007-07-11 03:08:57.000000000 +0200 -@@ -135,6 +135,10 @@ - * the interrupt line _up_ instead of down, so if we register the IRQ - * while the UART is in that state, we die in an IRQ storm. */ - #define ALPHA_KLUDGE_MCR (UART_MCR_OUT2) -+#elif defined(CONFIG_AR7) -+/* This is how it is set up by bootloader... */ -+#define ALPHA_KLUDGE_MCR (UART_MCR_OUT2 | UART_MCR_OUT1 \ -+ | UART_MCR_RTS | UART_MCR_DTR) - #else - #define ALPHA_KLUDGE_MCR 0 - #endif diff --git a/target/linux/ar7/patches-2.6.23/200-ethernet_driver.patch b/target/linux/ar7/patches-2.6.23/200-ethernet_driver.patch index 79fcf45351..08f26576be 100644 --- a/target/linux/ar7/patches-2.6.23/200-ethernet_driver.patch +++ b/target/linux/ar7/patches-2.6.23/200-ethernet_driver.patch @@ -1,7 +1,7 @@ -Index: linux-2.6.23-rc6/drivers/net/Kconfig +Index: linux-2.6.23/drivers/net/Kconfig =================================================================== ---- linux-2.6.23-rc6.orig/drivers/net/Kconfig 2007-09-21 16:24:02.000000000 +0800 -+++ linux-2.6.23-rc6/drivers/net/Kconfig 2007-09-21 16:24:13.000000000 +0800 +--- linux-2.6.23.orig/drivers/net/Kconfig 2007-10-10 13:52:54.000000000 +0800 ++++ linux-2.6.23/drivers/net/Kconfig 2007-10-10 13:53:54.000000000 +0800 @@ -1965,6 +1965,15 @@ To compile this driver as a module, choose M here: the module will be called sc92031. This is recommended. @@ -18,11 +18,11 @@ Index: linux-2.6.23-rc6/drivers/net/Kconfig config NET_POCKET bool "Pocket and portable adapters" depends on PARPORT -Index: linux-2.6.23-rc6/drivers/net/Makefile +Index: linux-2.6.23/drivers/net/Makefile =================================================================== ---- linux-2.6.23-rc6.orig/drivers/net/Makefile 2007-09-21 16:24:02.000000000 +0800 -+++ linux-2.6.23-rc6/drivers/net/Makefile 2007-09-21 16:24:13.000000000 +0800 -@@ -155,6 +155,7 @@ +--- linux-2.6.23.orig/drivers/net/Makefile 2007-10-10 13:52:54.000000000 +0800 ++++ linux-2.6.23/drivers/net/Makefile 2007-10-10 13:53:54.000000000 +0800 +@@ -156,6 +156,7 @@ obj-$(CONFIG_8139TOO) += 8139too.o obj-$(CONFIG_ZNET) += znet.o obj-$(CONFIG_LAN_SAA9730) += saa9730.o