fix BR2_ and CONFIG_ issues

git-svn-id: svn://svn.openwrt.org/openwrt/branches/buildroot-ng/openwrt@3769 3c298f89-4303-0410-b956-a3cf2f4a3e73
master
Mike Baker 2006-05-12 19:08:03 +00:00
parent 7b37cc4da9
commit 20e4ecc021
36 changed files with 256 additions and 253 deletions

View File

@ -34,5 +34,6 @@ config JLEVEL
Number of jobs to run simultanesouly
source "toolchain/Config.in"
source "target/linux/Config.in"
source ".config.in"

View File

@ -74,7 +74,7 @@ config LINUX_2_6_AU1000
Build firmware for AMD Alchemy 1500 boards
(e.g. 4G-Systems Mesh/Access Cube ...)
if CONFIG_DEVEL
if DEVEL
config LINUX_2_6_ARM
bool "UNSUPPORTED little-endian arm platform"
@ -195,7 +195,7 @@ config ARCH
default "i386" if i386
default "m68k" if m68k
default "mips" if mips
default "mipsel" if mipsel || !CONFIG_DEVEL
default "mipsel" if mipsel || !DEVEL
default "powerpc" if powerpc
default "sh3" if sh3
default "sh3eb" if sh3eb

View File

@ -1,19 +1,19 @@
menu "Target Root Filesystem"
config BR2_TARGET_ROOTFS_JFFS2
config TARGET_ROOTFS_JFFS2
bool "jffs2"
default y
help
Build a jffs2 root filesystem
config BR2_TARGET_ROOTFS_SQUASHFS_LZMA
config TARGET_ROOTFS_SQUASHFS_LZMA
bool "squashfs-lzma"
default y
depends !BR2_LINUX_2_6_ARUBA
depends !LINUX_2_6_ARUBA
help
Build a squashfs-lzma root filesystem
config BR2_TARGET_ROOTFS_TGZ
config TARGET_ROOTFS_TGZ
bool "tgz"
default y
help
@ -25,88 +25,90 @@ menu "Kernel Configuration / Device Support"
comment "Device specific configuration"
source "target/linux/*-2.[46]/Config.in"
comment "Kernel modules"
menu "Networking modules"
config BR2_PACKAGE_KMOD_ATM
config PACKAGE_KMOD_ATM
prompt "kmod-atm.......................... ATM support"
tristate
default y if BR2_LINUX_2_4_AR7
default y if LINUX_2_4_AR7
default m
help
ATM support
config BR2_PACKAGE_KMOD_GRE
config PACKAGE_KMOD_GRE
prompt "kmod-gre.......................... GRE tunneling driver"
tristate
default m
help
Kernel support for GRE tunnels
config BR2_PACKAGE_KMOD_IMQ
config PACKAGE_KMOD_IMQ
prompt "kmod-imq.......................... Intermediate Queueing device"
tristate
default m
help
Kernel support for the Intermediate Queueing device
config BR2_PACKAGE_KMOD_IPV6
config PACKAGE_KMOD_IPV6
prompt "kmod-ipv6......................... IPv6 support"
tristate
default m
help
Kernel modules for IPv6 protocol support
config BR2_PACKAGE_KMOD_PPP
config PACKAGE_KMOD_PPP
prompt "kmod-ppp.......................... PPP support"
tristate
default m
help
Kernel support for PPP
config BR2_PACKAGE_KMOD_MPPE
config PACKAGE_KMOD_MPPE
prompt "kmod-mppe....................... PPP MPPE/MPPC module"
tristate
default m
depends BR2_PACKAGE_KMOD_PPP
select BR2_PACKAGE_KMOD_CRYPTO
depends PACKAGE_KMOD_PPP
select PACKAGE_KMOD_CRYPTO
help
Support for Microsoft PPP Encryption/Compression
config BR2_PACKAGE_KMOD_PPPOATM
config PACKAGE_KMOD_PPPOATM
prompt "kmod-pppoatm.................... PPPoA (PPP over ATM) kernel support"
tristate
default y if BR2_LINUX_2_4_AR7
default y if LINUX_2_4_AR7
default m
depends BR2_PACKAGE_KMOD_PPP
select BR2_PACKAGE_KMOD_ATM
depends PACKAGE_KMOD_PPP
select PACKAGE_KMOD_ATM
help
Support for PPP over ATM
config BR2_PACKAGE_KMOD_PPPOE
config PACKAGE_KMOD_PPPOE
prompt "kmod-pppoe...................... PPPoE (PPP over Ethernet) kernel support"
tristate
default m
depends BR2_PACKAGE_KMOD_PPP
depends PACKAGE_KMOD_PPP
help
Support for PPP over Ethernet
config BR2_PACKAGE_KMOD_RING
config PACKAGE_KMOD_RING
prompt "kmod-ring......................... PF Ring"
tristate
default m
help
PF Ring
config BR2_PACKAGE_KMOD_SCHED
config PACKAGE_KMOD_SCHED
prompt "kmod-sched........................ Traffic schedulers"
tristate
default m
help
Kernel schedulers for IP traffic
config BR2_PACKAGE_KMOD_TUN
config PACKAGE_KMOD_TUN
prompt "kmod-tun.......................... Universal TUN/TAP driver"
tristate
default m
@ -117,44 +119,44 @@ endmenu
menu "Filtering/Firewalling"
config BR2_PACKAGE_KMOD_ARPTABLES
config PACKAGE_KMOD_ARPTABLES
prompt "kmod-arptables.................... ARP firewalling support"
tristate
default m
help
Kernel modules for ARP firewalling
config BR2_PACKAGE_KMOD_EBTABLES
config PACKAGE_KMOD_EBTABLES
prompt "kmod-ebtables..................... Ethernet Bridge firewalling support"
tristate
default m
help
Kernel modules for bridge firewalling
config BR2_PACKAGE_KMOD_IPTABLES
config PACKAGE_KMOD_IPTABLES
prompt "kmod-iptables..................... Core Netfilter modules for IPv4 firewalling"
tristate
default y
help
Kernel modules for IPv4 firewalling
config BR2_PACKAGE_KMOD_IPTABLES_EXTRA
config PACKAGE_KMOD_IPTABLES_EXTRA
prompt "kmod-iptables-extra............... Extra Netfilter modules for IPv4 firewalling (meta-package)"
tristate
default m
select BR2_PACKAGE_KMOD_IPT_CONNTRACK
select BR2_PACKAGE_KMOD_IPT_FILTER
select BR2_PACKAGE_KMOD_IPT_IPOPT
select BR2_PACKAGE_KMOD_IPT_IPSEC
select BR2_PACKAGE_KMOD_IPT_NAT
select BR2_PACKAGE_KMOD_IPT_NAT_EXTRA
select BR2_PACKAGE_KMOD_IPT_QUEUE
select BR2_PACKAGE_KMOD_IPT_ULOG
select BR2_PACKAGE_KMOD_IPT_EXTRA
select PACKAGE_KMOD_IPT_CONNTRACK
select PACKAGE_KMOD_IPT_FILTER
select PACKAGE_KMOD_IPT_IPOPT
select PACKAGE_KMOD_IPT_IPSEC
select PACKAGE_KMOD_IPT_NAT
select PACKAGE_KMOD_IPT_NAT_EXTRA
select PACKAGE_KMOD_IPT_QUEUE
select PACKAGE_KMOD_IPT_ULOG
select PACKAGE_KMOD_IPT_EXTRA
help
Extra Netfilter kernel modules for IPv4 firewalling (meta-package)
config BR2_PACKAGE_KMOD_IPT_CONNTRACK
config PACKAGE_KMOD_IPT_CONNTRACK
prompt "kmod-ipt-conntrack................ Netfilter modules for connection tracking"
tristate
default m
@ -166,7 +168,7 @@ config BR2_PACKAGE_KMOD_IPT_CONNTRACK
* ipt_helper
* ipt_connmark/CONNMARK
config BR2_PACKAGE_KMOD_IPT_FILTER
config PACKAGE_KMOD_IPT_FILTER
prompt "kmod-ipt-filter................... Netfilter modules for packet content inspection"
tristate
default m
@ -177,7 +179,7 @@ config BR2_PACKAGE_KMOD_IPT_FILTER
* ipt_ipp2p
* ipt_layer7
config BR2_PACKAGE_KMOD_IPT_IPOPT
config PACKAGE_KMOD_IPT_IPOPT
prompt "kmod-ipt-ipopt.................... Netfilter modules for matching/changing IP packet options"
tristate
default m
@ -194,7 +196,7 @@ config BR2_PACKAGE_KMOD_IPT_IPOPT
* ipt_ttl/TTL
* ipt_unclean
config BR2_PACKAGE_KMOD_IPT_IPSEC
config PACKAGE_KMOD_IPT_IPSEC
prompt "kmod-ipt-ipsec.................... Netfilter modules for matching IPsec packets"
tristate
default m
@ -205,7 +207,7 @@ config BR2_PACKAGE_KMOD_IPT_IPSEC
* ipt_ah
* ipt_esp
config BR2_PACKAGE_KMOD_IPT_NAT
config PACKAGE_KMOD_IPT_NAT
prompt "kmod-ipt-nat...................... Netfilter modules for different NAT targets"
tristate
default m
@ -215,7 +217,7 @@ config BR2_PACKAGE_KMOD_IPT_NAT
Includes:
* ipt_REDIRECT
config BR2_PACKAGE_KMOD_IPT_NAT_EXTRA
config PACKAGE_KMOD_IPT_NAT_EXTRA
prompt "kmod-ipt-nat-extra................ Extra Netfilter NAT modules for special protocols"
tristate
default m
@ -233,7 +235,7 @@ config BR2_PACKAGE_KMOD_IPT_NAT_EXTRA
* ip_nat_snmp_basic
* ip_conntrack_tftp
config BR2_PACKAGE_KMOD_IPT_QUEUE
config PACKAGE_KMOD_IPT_QUEUE
prompt "kmod-ipt-queue.................... Netfilter module for user-space packet queueing"
tristate
default m
@ -243,7 +245,7 @@ config BR2_PACKAGE_KMOD_IPT_QUEUE
Includes:
* ipt_QUEUE
config BR2_PACKAGE_KMOD_IPT_ULOG
config PACKAGE_KMOD_IPT_ULOG
prompt "kmod-ipt-ulog..................... Netfilter module for user-space packet logging"
tristate
default m
@ -253,7 +255,7 @@ config BR2_PACKAGE_KMOD_IPT_ULOG
Includes:
* ipt_ULOG
config BR2_PACKAGE_KMOD_IPT_EXTRA
config PACKAGE_KMOD_IPT_EXTRA
prompt "kmod-ipt-extra.................... Other extra Netfilter modules"
tristate
default m
@ -267,11 +269,11 @@ config BR2_PACKAGE_KMOD_IPT_EXTRA
* ipt_pkttype
* ipt_recent
config BR2_PACKAGE_KMOD_IP6TABLES
config PACKAGE_KMOD_IP6TABLES
prompt "kmod-ip6tables.................... Kernel modules for ip6tables"
tristate
default m
depends BR2_PACKAGE_KMOD_IPV6
depends PACKAGE_KMOD_IPV6
help
IPv6 firewalling support
@ -279,11 +281,11 @@ endmenu
menu "Block devices support"
config BR2_PACKAGE_KMOD_IDE
config PACKAGE_KMOD_IDE
prompt "kmod-ide.......................... IDE support"
tristate
default m
depends BR2_LINUX_2_4_X86 || BR2_LINUX_2_6_X86 || BR2_LINUX_2_4_BRCM || BR2_LINUX_2_6_BRCM
depends LINUX_2_4_X86 || LINUX_2_6_X86 || LINUX_2_4_BRCM || LINUX_2_6_BRCM
help
Kernel modules for IDE support
useful for usb mass storage devices (e.g. on WL-HDD)
@ -292,16 +294,16 @@ config BR2_PACKAGE_KMOD_IDE
- ide-core
- ide-detect
- ide-disk
- pdc202xx_old
- pdc202old
config BR2_PACKAGE_KMOD_LOOP
config PACKAGE_KMOD_LOOP
prompt "kmod-loop......................... Loop mount support"
tristate
default m
help
Kernel module for loop mount support
config BR2_PACKAGE_KMOD_NBD
config PACKAGE_KMOD_NBD
prompt "kmod-nbd.......................... Network Block Device"
tristate
default m
@ -310,45 +312,45 @@ config BR2_PACKAGE_KMOD_NBD
endmenu
config BR2_PACKAGE_KMOD_CRYPTO
config PACKAGE_KMOD_CRYPTO
prompt "CryptoAPI modules"
tristate
default m
select BUSYBOX_CONFIG_FEATURE_CHECK_TAINTED_MODULE
select BUSYBOX_FEATURE_CHECK_TAINTED_MODULE
help
Kernel modules for cryptographic algorithms
menu "Filesystems support"
config BR2_PACKAGE_KMOD_FS_CIFS
config PACKAGE_KMOD_FS_CIFS
prompt "kmod-fs-cifs...................... CIFS support"
tristate
default m
help
Kernel modules for CIFS support
config BR2_PACKAGE_KMOD_FS_EXT2
config PACKAGE_KMOD_FS_EXT2
prompt "kmod-fs-ext2...................... EXT2 filesystem support"
tristate
default m
help
Kernel modules for EXT2 filesystem support
config BR2_PACKAGE_KMOD_FS_EXT3
config PACKAGE_KMOD_FS_EXT3
prompt "kmod-fs-ext3...................... EXT3 filesystem support"
tristate
default m
help
Kernel modules for EXT3 filesystem support
config BR2_PACKAGE_KMOD_FS_HFSPLUS
config PACKAGE_KMOD_FS_HFSPLUS
prompt "kmod-fs-hfsplus................... HFS+ filesystem support"
tristate
default m
help
Kernel modules for HFS+ filesystem support
config BR2_PACKAGE_KMOD_FS_NFS
config PACKAGE_KMOD_FS_NFS
prompt "kmod-fs-nfs....................... NFS support"
tristate
default m
@ -356,7 +358,7 @@ config BR2_PACKAGE_KMOD_FS_NFS
Kernel modules for NFS support
Includes lockd, nfs and sunrpc
config BR2_PACKAGE_KMOD_FS_VFAT
config PACKAGE_KMOD_FS_VFAT
prompt "kmod-fs-vfat...................... VFAT filesystem support"
tristate
default m
@ -364,7 +366,7 @@ config BR2_PACKAGE_KMOD_FS_VFAT
Kernel modules for VFAT filesystem support
useful for usb mass storage devices
config BR2_PACKAGE_KMOD_FS_XFS
config PACKAGE_KMOD_FS_XFS
prompt "kmod-fs-xfs....................... XFS filesystem support"
tristate
default m
@ -375,13 +377,13 @@ endmenu
menu "Multimedia devices support"
config BR2_PACKAGE_KMOD_PWC
config PACKAGE_KMOD_PWC
prompt "kmod-pwc.......................... Kernel driver for USB Philips Cameras"
tristate
depends BR2_PACKAGE_KMOD_USB
depends PACKAGE_KMOD_USB
default m
config BR2_PACKAGE_KMOD_SOUNDCORE
config PACKAGE_KMOD_SOUNDCORE
prompt "kmod-soundcore.................... Soundcard support"
tristate
default n
@ -389,7 +391,7 @@ config BR2_PACKAGE_KMOD_SOUNDCORE
Base support for soundcards
Requires either USB soundcard support (OSS) or ALSA package to be useful
config BR2_PACKAGE_KMOD_VIDEODEV
config PACKAGE_KMOD_VIDEODEV
prompt "kmod-videodev..................... Video (For Linux) kernel support"
tristate
default m
@ -398,62 +400,62 @@ endmenu
menu "Native Language support"
config BR2_PACKAGE_KMOD_NLS_BASE
config PACKAGE_KMOD_NLS_BASE
prompt "kmod-nls-base..................... Native Language support"
tristate
default m
help
Kernel native language support
config BR2_PACKAGE_KMOD_NLS_CP437
config PACKAGE_KMOD_NLS_CP437
prompt "kmod-nls-cp437.................. Codepage 437 (United States, Canada)"
tristate
default m
depends BR2_PACKAGE_KMOD_NLS_BASE
depends PACKAGE_KMOD_NLS_BASE
help
Kernel native language support
config BR2_PACKAGE_KMOD_NLS_CP850
config PACKAGE_KMOD_NLS_CP850
prompt "kmod-nls-cp850.................. Codepage 850 (Europe)"
tristate
default m
depends BR2_PACKAGE_KMOD_NLS_BASE
depends PACKAGE_KMOD_NLS_BASE
help
Kernel native language support
config BR2_PACKAGE_KMOD_NLS_ISO8859_1
config PACKAGE_KMOD_NLS_ISO8859_1
prompt "kmod-nls-iso8859-1.............. NLS ISO 8859-1 (Latin 1; Western European Languages)"
tristate
default m
depends BR2_PACKAGE_KMOD_NLS_BASE
depends PACKAGE_KMOD_NLS_BASE
help
Kernel native language support
config BR2_PACKAGE_KMOD_NLS_ISO8859_15
config PACKAGE_KMOD_NLS_ISO8859_15
prompt "kmod-nls-iso8859-15............. NLS ISO 8859-15 (Latin 15; Western European Languages with Euro)"
tristate
default m
depends BR2_PACKAGE_KMOD_NLS_BASE
depends PACKAGE_KMOD_NLS_BASE
help
Kernel native language support
config BR2_PACKAGE_KMOD_NLS_UTF8
config PACKAGE_KMOD_NLS_UTF8
prompt "kmod-nls-utf8................... NLS UTF8"
tristate
default m
depends BR2_PACKAGE_KMOD_NLS_BASE
depends PACKAGE_KMOD_NLS_BASE
help
Kernel native language support
endmenu
menu "Network devices support"
depends BR2_LINUX_2_4_X86 || BR2_LINUX_2_6_X86
depends LINUX_2_4_X86 || LINUX_2_6_X86
config BR2_PACKAGE_KMOD_NET_3C59X
config PACKAGE_KMOD_NET_3C59X
prompt "kmod-net-3c59x.................... 3Com 3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" Ethernet kernel support"
tristate
depends BR2_LINUX_2_4_X86 || BR2_LINUX_2_6_X86
depends LINUX_2_4_X86 || LINUX_2_6_X86
default m
help
This option enables driver support for a large number of 10mbps and
@ -465,19 +467,19 @@ config BR2_PACKAGE_KMOD_NET_3C59X
* "Tornado" (3c905) PCI
* "Hurricane" (3c555/3cSOHO) PCI
config BR2_PACKAGE_KMOD_NET_8139TOO
config PACKAGE_KMOD_NET_8139TOO
prompt "kmod-net-8139too.................. RealTek RTL-8139 PCI Fast Ethernet Adapter kernel support"
tristate
depends BR2_LINUX_2_4_X86 || BR2_LINUX_2_6_X86
depends LINUX_2_4_X86 || LINUX_2_6_X86
default m
help
This is a driver for the Fast Ethernet PCI network cards based on
the RTL8139 chips.
config BR2_PACKAGE_KMOD_NET_AIRO
config PACKAGE_KMOD_NET_AIRO
prompt "kmod-net-airo..................... Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards kernel support"
tristate
depends BR2_LINUX_2_4_X86 || BR2_LINUX_2_6_X86
depends LINUX_2_4_X86 || LINUX_2_6_X86
default m
help
This is the standard Linux driver to support Cisco/Aironet ISA and
@ -490,18 +492,18 @@ config BR2_PACKAGE_KMOD_NET_AIRO
and Cisco proprietary API, so both the Linux Wireless Tools and the
Cisco Linux utilities can be used to configure the card.
config BR2_PACKAGE_KMOD_NET_E100
config PACKAGE_KMOD_NET_E100
prompt "kmod-net-e100..................... Intel(R) PRO/100+ cards kernel support"
tristate
depends BR2_LINUX_2_4_X86 || BR2_LINUX_2_6_X86
depends LINUX_2_4_X86 || LINUX_2_6_X86
default m
help
Intel(R) PRO/100+ cards kernel support
config BR2_PACKAGE_KMOD_NET_HERMES
config PACKAGE_KMOD_NET_HERMES
prompt "kmod-net-hermes................... Hermes chipset 802.11b support (Orinoco/Prism2/Symbol) kernel support"
tristate
depends BR2_LINUX_2_4_X86 || BR2_LINUX_2_6_X86
depends LINUX_2_4_X86 || LINUX_2_6_X86
default m
help
A driver for 802.11b wireless cards based based on the "Hermes" or
@ -514,11 +516,11 @@ config BR2_PACKAGE_KMOD_NET_HERMES
MA401, LinkSys WPC-11, D-Link DWL-650, 3Com AirConnect, Intel
PRO/Wireless, and Symbol Spectrum24 High Rate amongst others.
config BR2_PACKAGE_KMOD_NET_HERMES_PCI
config PACKAGE_KMOD_NET_HERMES_PCI
prompt "kmod-net-hermes-pci............. Intersil Prism 2.5 PCI 802.11b adaptor support"
tristate
default m
depends BR2_PACKAGE_KMOD_NET_HERMES
depends PACKAGE_KMOD_NET_HERMES
help
Enable support for PCI and mini-PCI 802.11b wireless NICs based on
the Prism 2.5 chipset. These are true PCI cards, not the 802.11b
@ -526,11 +528,11 @@ config BR2_PACKAGE_KMOD_NET_HERMES_PCI
common. Some of the built-in wireless adaptors in laptops are of
this variety.
config BR2_PACKAGE_KMOD_NET_HERMES_PLX
config PACKAGE_KMOD_NET_HERMES_PLX
prompt "kmod-net-hermes-plx............. Hermes in PLX9052 based PCI adaptor (Netgear MA301, etc.) kernel support"
tristate
default m
depends BR2_PACKAGE_KMOD_NET_HERMES
depends PACKAGE_KMOD_NET_HERMES
help
Enable support for PCMCIA cards supported by the "Hermes" (aka
orinoco_cs) driver when used in PLX9052 based PCI adaptors. These
@ -539,20 +541,20 @@ config BR2_PACKAGE_KMOD_NET_HERMES_PLX
802.11b PCMCIA cards can be used in desktop machines. The Netgear
MA301 is such an adaptor.
config BR2_PACKAGE_KMOD_NET_NATSEMI
config PACKAGE_KMOD_NET_NATSEMI
prompt "kmod-net-natsemi.................. National Semiconductor DP8381x series PCI Ethernet kernel support"
tristate
depends BR2_LINUX_2_4_X86 || BR2_LINUX_2_6_X86
depends LINUX_2_4_X86 || LINUX_2_6_X86
default m
help
This driver is for the National Semiconductor DP83810 series,
which is used in cards from PureData, NetGear, Linksys
and others, including the 83815 chip.
config BR2_PACKAGE_KMOD_NET_PRISM54
config PACKAGE_KMOD_NET_PRISM54
prompt "kmod-net-prism54.................. Intersil Prism GT/Duette/Indigo PCI/PCMCIA cards kernel support"
tristate
depends BR2_LINUX_2_4_X86 || BR2_LINUX_2_6_X86 || BR2_LINUX_2_4_BRCM || BR2_LINUX_2_6_BRCM
depends LINUX_2_4_X86 || LINUX_2_6_X86 || LINUX_2_4_BRCM || LINUX_2_6_BRCM
default m
help
Enable PCI and Cardbus support for the following chipset based cards:
@ -591,135 +593,135 @@ config BR2_PACKAGE_KMOD_NET_PRISM54
endmenu
menu "PCMCIA/CardBus support"
depends BR2_LINUX_2_4_X86 || BR2_LINUX_2_6_X86 || BR2_LINUX_2_4_BRCM || BR2_LINUX_2_6_BRCM
depends LINUX_2_4_X86 || LINUX_2_6_X86 || LINUX_2_4_BRCM || LINUX_2_6_BRCM
config BR2_PACKAGE_KMOD_PCMCIA_CORE
config PACKAGE_KMOD_PCMCIA_CORE
prompt "kmod-pcmcia-core.................. PCMCIA/CardBus support"
depends BR2_LINUX_PCMCIA_SUPPORT
depends LINUX_PCMCIA_SUPPORT
tristate
depends BR2_LINUX_2_4_X86 || BR2_LINUX_2_6_X86 || BR2_LINUX_2_4_BRCM || BR2_LINUX_2_6_BRCM
depends LINUX_2_4_X86 || LINUX_2_6_X86 || LINUX_2_4_BRCM || LINUX_2_6_BRCM
default m
config BR2_PACKAGE_KMOD_PCMCIA_SERIAL
config PACKAGE_KMOD_PCMCIA_SERIAL
prompt "kmod-pcmcia-serial.............. PCMCIA/CardBus serial device support"
tristate
default m
depends BR2_PACKAGE_KMOD_PCMCIA_CORE
depends PACKAGE_KMOD_PCMCIA_CORE
endmenu
menu "USB support"
config BR2_PACKAGE_KMOD_USB
config PACKAGE_KMOD_USB
prompt "kmod-usb-core..................... USB support"
tristate
default n if BR2_LINUX_2_4_AR531X
default n if LINUX_2_4_AR531X
default m
config BR2_PACKAGE_KMOD_USB_UHCI
config PACKAGE_KMOD_USB_UHCI
prompt "kmod-usb-uhci................... Support for UHCI controllers"
tristate
default n if BR2_LINUX_2_6_AU1000
depends BR2_PACKAGE_KMOD_USB
select BR2_PACKAGE_KMOD_USB_CONTROLLER
default n if LINUX_2_6_AU1000
depends PACKAGE_KMOD_USB
select PACKAGE_KMOD_USB_CONTROLLER
config BR2_PACKAGE_KMOD_USB_OHCI
config PACKAGE_KMOD_USB_OHCI
prompt "kmod-usb-ohci................... Support for OHCI controllers"
tristate
default m
depends BR2_PACKAGE_KMOD_USB
select BR2_PACKAGE_KMOD_USB_CONTROLLER
depends PACKAGE_KMOD_USB
select PACKAGE_KMOD_USB_CONTROLLER
config BR2_PACKAGE_KMOD_USB2
config PACKAGE_KMOD_USB2
prompt "kmod-usb2....................... Support for USB 2.0 controllers"
tristate
default n if BR2_LINUX_2_6_AU1000
depends BR2_PACKAGE_KMOD_USB
select BR2_PACKAGE_KMOD_USB_CONTROLLER
default n if LINUX_2_6_AU1000
depends PACKAGE_KMOD_USB
select PACKAGE_KMOD_USB_CONTROLLER
config BR2_PACKAGE_KMOD_USB_CONTROLLER
config PACKAGE_KMOD_USB_CONTROLLER
tristate
depends on BR2_PACKAGE_KMOD_USB_UHCI || BR2_PACKAGE_KMOD_USB_OHCI || BR2_PACKAGE_KMOD_USB2
depends on PACKAGE_KMOD_USB_UHCI || PACKAGE_KMOD_USB_OHCI || PACKAGE_KMOD_USB2
default n
config BR2_PACKAGE_KMOD_USB_ACM
config PACKAGE_KMOD_USB_ACM
prompt "kmod-usb-acm...................... Support for USB modems/isdn controllers"
tristate
default m
depends BR2_PACKAGE_KMOD_USB_CONTROLLER
depends PACKAGE_KMOD_USB_CONTROLLER
config BR2_PACKAGE_KMOD_USB_AUDIO
config PACKAGE_KMOD_USB_AUDIO
prompt "kmod-usb-audio.................... Support for USB soundcards"
tristate
default m
depends BR2_PACKAGE_KMOD_USB_CONTROLLER
select BR2_PACKAGE_KMOD_SOUNDCORE
depends PACKAGE_KMOD_USB_CONTROLLER
select PACKAGE_KMOD_SOUNDCORE
config BR2_PACKAGE_KMOD_USB_PRINTER
config PACKAGE_KMOD_USB_PRINTER
prompt "kmod-usb-printer.................. Support for USB printers"
tristate
default m
depends BR2_PACKAGE_KMOD_USB_CONTROLLER
depends PACKAGE_KMOD_USB_CONTROLLER
config BR2_PACKAGE_KMOD_USB_SERIAL
config PACKAGE_KMOD_USB_SERIAL
prompt "kmod-usb-serial................... Support for USB-to-serial converters"
tristate
default m
depends BR2_PACKAGE_KMOD_USB_CONTROLLER
depends PACKAGE_KMOD_USB_CONTROLLER
config BR2_PACKAGE_KMOD_USB_SERIAL_BELKIN
config PACKAGE_KMOD_USB_SERIAL_BELKIN
prompt "kmod-usb-serial-belkin.......... Support for Belkin USB-to-serial converters"
tristate
default m
depends BR2_PACKAGE_KMOD_USB_SERIAL
depends PACKAGE_KMOD_USB_SERIAL
config BR2_PACKAGE_KMOD_USB_SERIAL_FTDI
config PACKAGE_KMOD_USB_SERIAL_FTDI
prompt "kmod-usb-serial-ftdi............ Support for FTDI USB-to-serial converterr"
tristate
default m
depends BR2_PACKAGE_KMOD_USB_SERIAL
depends PACKAGE_KMOD_USB_SERIAL
config BR2_PACKAGE_KMOD_USB_SERIAL_MCT_U232
config PACKAGE_KMOD_USB_SERIAL_MCT_U232
prompt "kmod-usb-serial-mct-u232........ Support for Magic Control Technology USB-to-Serial converters"
tristate
default m
depends BR2_PACKAGE_KMOD_USB_SERIAL
depends PACKAGE_KMOD_USB_SERIAL
config BR2_PACKAGE_KMOD_USB_SERIAL_PL2303
config PACKAGE_KMOD_USB_SERIAL_PL2303
prompt "kmod-usb-serial-pl2303.......... Support for Prolific PL2303 USB-to-Serial converters"
tristate
default m
depends BR2_PACKAGE_KMOD_USB_SERIAL
depends PACKAGE_KMOD_USB_SERIAL
config BR2_PACKAGE_KMOD_USB_SERIAL_VISOR
config PACKAGE_KMOD_USB_SERIAL_VISOR
prompt "kmod-usb-serial-visor........... Support for Handspring Visor / Palm m50x / Sony Clie Driver"
tristate
default m
depends BR2_PACKAGE_KMOD_USB_SERIAL
depends PACKAGE_KMOD_USB_SERIAL
config BR2_PACKAGE_KMOD_USB_STORAGE
config PACKAGE_KMOD_USB_STORAGE
prompt "kmod-usb-storage.................. Support for USB storage devices"
tristate
default m
depends BR2_PACKAGE_KMOD_USB_CONTROLLER
depends PACKAGE_KMOD_USB_CONTROLLER
config BR2_PACKAGE_KMOD_USB_ATM
config PACKAGE_KMOD_USB_ATM
prompt "kmod-usb-atm...................... Support for USB ATM devices"
tristate
default m
depends BR2_PACKAGE_KMOD_USB_CONTROLLER
depends PACKAGE_KMOD_USB_CONTROLLER
config BR2_PACKAGE_KMOD_USB_ATM_SPEEDTOUCH
config PACKAGE_KMOD_USB_ATM_SPEEDTOUCH
prompt "kmod-usb-atm-speedtouch......... Support for USB Speedtouch ADSL modem"
tristate
default m
depends BR2_PACKAGE_KMOD_USB_ATM
depends PACKAGE_KMOD_USB_ATM
endmenu
menu "Misc. devices support"
config BR2_PACKAGE_KMOD_AX25
config PACKAGE_KMOD_AX25
prompt "kmod-ax25......................... AX25 support"
tristate
default m
@ -728,33 +730,33 @@ config BR2_PACKAGE_KMOD_AX25
This package contains both the AX25 layer 2 support (ax25) and AX25 KISS driver (mkiss)
config BR2_PACKAGE_KMOD_BLUETOOTH
config PACKAGE_KMOD_BLUETOOTH
prompt "kmod-bluetooth.................... Bluetooth drivers and network stack"
tristate
default m
default n if BR2_LINUX_2_4_AR531X
default n if LINUX_2_4_AR531X
help
Bluetooth drivers and network stack
config BR2_PACKAGE_KMOD_LP
config PACKAGE_KMOD_LP
prompt "kmod-lp........................... Parallel port and lp support"
tristate
default m
help
Kernel modules for line printer and parallel port support
config BR2_PACKAGE_KMOD_SOFTDOG
config PACKAGE_KMOD_SOFTDOG
prompt "kmod-softdog...................... Software watchdog"
tristate
default m
help
Kernel modules for software watchdog driver
config BR2_PACKAGE_KMOD_WD1100
config PACKAGE_KMOD_WD1100
prompt "kmod-wd1100....................... Soekris net4801 watchdog"
tristate
default y
depends BR2_LINUX_2_4_X86
depends LINUX_2_4_X86
help
Driver for the NatSemi SC1x00 series Watchdog
found on Soekris net4801 boards

View File

@ -1,27 +1,27 @@
config BR2_PACKAGE_KMOD_CPMAC
config PACKAGE_KMOD_CPMAC
prompt "kmod-cpmac........................ AR7 CPMAC Network Driver"
tristate
default y
depends BR2_LINUX_2_4_AR7
depends LINUX_2_4_AR7
help
Driver for the AR7 CPMAC network chip
config BR2_PACKAGE_KMOD_SANGAM_ATM_A
config PACKAGE_KMOD_SANGAM_ATM_A
prompt "kmod-sangam-atm-annex-a........... AR7 Sangam ADSL Driver (Annex A)"
tristate
default m
depends BR2_LINUX_2_4_AR7
select BR2_PACKAGE_KMOD_ATM
depends LINUX_2_4_AR7
select PACKAGE_KMOD_ATM
help
ATM driver for the Sangam ADSL chip on AR7
Annex A version
config BR2_PACKAGE_KMOD_SANGAM_ATM_B
config PACKAGE_KMOD_SANGAM_ATM_B
prompt "kmod-sangam-atm-annex-b........... AR7 Sangam ADSL Driver (Annex B)"
tristate
default y
depends BR2_LINUX_2_4_AR7
select BR2_PACKAGE_KMOD_ATM
depends LINUX_2_4_AR7
select PACKAGE_KMOD_ATM
help
ATM driver for the Sangam ADSL chip on AR7
Annex B version

View File

@ -1,4 +1,4 @@
config BR2_ARUBA_RAMDISK
config ARUBA_RAMDISK
prompt "ramdisk support"
depends BR2_LINUX_2_6_ARUBA
depends LINUX_2_6_ARUBA
bool

View File

@ -14,7 +14,7 @@ include ../kernel.mk
$(LINUX_DIR)/.patched: $(LINUX_DIR)/.unpacked
[ -d ../generic-$(KERNEL)/patches ] && $(PATCH) $(LINUX_DIR) ../generic-$(KERNEL)/patches $(MAKE_TRACE)
[ -d ./patches ] && $(PATCH) $(LINUX_DIR) ./patches $(MAKE_TRACE)
ifeq ($(BR2_ARUBA_RAMDISK),y)
ifeq ($(CONFIG_ARUBA_RAMDISK),y)
@$(CP) config-ramdisk $(LINUX_DIR)/.config
else
@$(CP) config $(LINUX_DIR)/.config

View File

@ -1,15 +1,15 @@
config BR2_PACKAGE_KMOD_BRCM_WL
config PACKAGE_KMOD_BRCM_WL
prompt "kmod-brcm-wl...................... Broadcom Wireless Network Driver"
tristate
depends BR2_LINUX_2_4_BRCM
depends LINUX_2_4_BRCM
default y
help
Proprietary driver for Broadcom Wireless chipsets
config BR2_PACKAGE_KMOD_BRCM_WL2
config PACKAGE_KMOD_BRCM_WL2
prompt "kmod-brcm-wl2..................... Broadcom Wireless Network Driver (new)"
tristate
depends BR2_LINUX_2_4_BRCM
depends LINUX_2_4_BRCM
default m
help
Proprietary driver for Broadcom Wireless chipsets

View File

@ -2,15 +2,15 @@ include $(TOPDIR)/rules.mk
KDIR:=$(BUILD_DIR)/linux-$(KERNEL)-$(BOARD)
ifeq ($(BR2_TARGET_ROOTFS_JFFS2),y)
ifeq ($(CONFIG_TARGET_ROOTFS_JFFS2),y)
include ./jffs2.mk
endif
ifeq ($(BR2_TARGET_ROOTFS_SQUASHFS_LZMA),y)
ifeq ($(CONFIG_TARGET_ROOTFS_SQUASHFS_LZMA),y)
include ./squashfs.mk
endif
ifeq ($(BR2_TARGET_ROOTFS_TGZ),y)
ifeq ($(CONFIG_TARGET_ROOTFS_TGZ),y)
include ./tgz.mk
endif

View File

@ -36,7 +36,7 @@ ifeq ($(FS),jffs2-4MB)
$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL).ari: $(KDIR)/loader.elf
./addVersion -n ArubaOS $(KDIR)/loader.elf $@ version
ifneq ($(BR2_ARUBA_RAMDISK),y)
ifneq ($(CONFIG_ARUBA_RAMDISK),y)
$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FSNAME).bin: $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL).ari $(KDIR)/root.$(FS)
@dd if=$< of=$@.tmp bs=655360 conv=sync
@cat $(KDIR)/root.$(FS) >> $@.tmp

View File

@ -1,4 +1,4 @@
ifneq ($(BR2_mips),y)
ifneq ($(CONFIG_mips),y)
JFFS2OPTS := --pad --little-endian --squash
else
JFFS2OPTS := --pad --big-endian --squash

View File

@ -3,22 +3,22 @@ include $(TOPDIR)/rules.mk
include ../rules.mk
package-y += base-files
package-$(BR2_PACKAGE_KMOD_ALSA) += alsa
package-$(BR2_PACKAGE_KMOD_FUSE) += fuse
package-$(BR2_PACKAGE_KMOD_HOSTAP) += hostap
package-$(BR2_PACKAGE_KMOD_BCM43XX_STANDALONE) += bcm43xx-standalone
package-$(BR2_PACKAGE_KMOD_IEEE80211_DSCAPE) += ieee80211-dscape
package-$(BR2_PACKAGE_KMOD_MADWIFI) += madwifi
package-$(BR2_PACKAGE_KMOD_MADWIFI_OLD) += madwifi-old
package-$(BR2_PACKAGE_KMOD_MINI_FO) += mini_fo
package-$(BR2_PACKAGE_KMOD_OPENSWAN) += openswan
package-$(BR2_PACKAGE_KMOD_SHFS) += shfs
package-$(BR2_PACKAGE_KMOD_SPCA5XX) += spca5xx
package-$(BR2_PACKAGE_KMOD_SWITCH) += switch
package-$(BR2_PACKAGE_KMOD_UEAGLE_ATM) += ueagle-atm
package-$(BR2_PACKAGE_KMOD_DIAG) += diag
package-$(BR2_PACKAGE_KMOD_WLCOMPAT) += wlcompat
package-$(BR2_PACKAGE_KMOD_ZD1211) += zd1211
package-$(CONFIG_PACKAGE_KMOD_ALSA) += alsa
package-$(CONFIG_PACKAGE_KMOD_FUSE) += fuse
package-$(CONFIG_PACKAGE_KMOD_HOSTAP) += hostap
package-$(CONFIG_PACKAGE_KMOD_BCM43XX_STANDALONE) += bcm43xx-standalone
package-$(CONFIG_PACKAGE_KMOD_IEEE80211_DSCAPE) += ieee80211-dscape
package-$(CONFIG_PACKAGE_KMOD_MADWIFI) += madwifi
package-$(CONFIG_PACKAGE_KMOD_MADWIFI_OLD) += madwifi-old
package-$(CONFIG_PACKAGE_KMOD_MINI_FO) += mini_fo
package-$(CONFIG_PACKAGE_KMOD_OPENSWAN) += openswan
package-$(CONFIG_PACKAGE_KMOD_SHFS) += shfs
package-$(CONFIG_PACKAGE_KMOD_SPCA5XX) += spca5xx
package-$(CONFIG_PACKAGE_KMOD_SWITCH) += switch
package-$(CONFIG_PACKAGE_KMOD_UEAGLE_ATM) += ueagle-atm
package-$(CONFIG_PACKAGE_KMOD_DIAG) += diag
package-$(CONFIG_PACKAGE_KMOD_WLCOMPAT) += wlcompat
package-$(CONFIG_PACKAGE_KMOD_ZD1211) += zd1211
bcm43xx-standalone-compile: ieee80211-dscape-compile
wlcompat-compile: base-files-compile

View File

@ -1,9 +1,9 @@
config BR2_PACKAGE_KMOD_ALSA
config PACKAGE_KMOD_ALSA
prompt "kmod-alsa......................... Alsa Sound Drivers"
tristate
depends BR2_LINUX_2_4_X86 || BR2_LINUX_2_4_BRCM || BR2_LINUX_2_6_X86 || BR2_LINUX_2_6_BRCM
depends BR2_PACKAGE_KMOD_USB_CONTROLLER
select BR2_PACKAGE_KMOD_SOUNDCORE
default m if CONFIG_DEVEL
depends LINUX_2_4_X86 || LINUX_2_4_BRCM || LINUX_2_6_X86 || LINUX_2_6_BRCM
depends PACKAGE_KMOD_USB_CONTROLLER
select PACKAGE_KMOD_SOUNDCORE
default m if DEVEL
help
Alsa Drivers for USB Soundcards

View File

@ -1,8 +1,8 @@
config BR2_PACKAGE_KMOD_BCM43XX_STANDALONE
config PACKAGE_KMOD_BCM43XX_STANDALONE
prompt "kmod-bcm43xx-standalone............... Free Broadcom 43xx wireless driver (devicescape stack)"
tristate
depends BR2_LINUX_2_6_BRCM
select BR2_PACKAGE_KMOD_IEEE80211_DSCAPE
depends LINUX_2_6_BRCM
select PACKAGE_KMOD_IEEE80211_DSCAPE
default n
help
Free driver for the Broadcom 43xx wireless chipset

View File

@ -1,7 +1,7 @@
config BR2_PACKAGE_KMOD_DIAG
config PACKAGE_KMOD_DIAG
prompt "kmod-diag......................... Driver for router LEDs and Buttons"
tristate
depends BR2_LINUX_2_4_BRCM
depends LINUX_2_4_BRCM
default y
help
Driver for router LEDs and Buttons

View File

@ -1,7 +1,7 @@
config BR2_PACKAGE_KMOD_FUSE
config PACKAGE_KMOD_FUSE
prompt "kmod-fuse......................... FUSE kernel module"
tristate
default m if CONFIG_DEVEL
default m if DEVEL
help
With FUSE it is possible to implement a fully functional
filesystem in a userspace program.

View File

@ -1,8 +1,8 @@
config BR2_PACKAGE_KMOD_HOSTAP
config PACKAGE_KMOD_HOSTAP
prompt "kmod-hostap....................... Host AP support for Prism2/2.5/3 IEEE 802.11b"
tristate
depends BR2_LINUX_2_4_X86 || BR2_LINUX_2_4_BRCM
default m if CONFIG_DEVEL
depends LINUX_2_4_X86 || LINUX_2_4_BRCM
default m if DEVEL
help
A driver for 802.11b wireless cards based on Intersil Prism2/2.5/3
chipset. This driver supports so called Host AP mode that allows
@ -14,11 +14,11 @@ config BR2_PACKAGE_KMOD_HOSTAP
http://hostap.epitest.fi/
config BR2_PACKAGE_KMOD_HOSTAP_PCI
config PACKAGE_KMOD_HOSTAP_PCI
prompt "kmod-hostap-pci................. Host AP driver for Prism2.5 PCI adaptors"
tristate
default m if CONFIG_DEVEL
depends BR2_PACKAGE_KMOD_HOSTAP
default m if DEVEL
depends PACKAGE_KMOD_HOSTAP
help
Host AP support for Prism2/2.5/3 IEEE 802.11b" is required for this
driver and its help text includes more information about the Host AP
@ -26,11 +26,11 @@ config BR2_PACKAGE_KMOD_HOSTAP_PCI
http://hostap.epitest.fi/
config BR2_PACKAGE_KMOD_HOSTAP_PLX
config PACKAGE_KMOD_HOSTAP_PLX
prompt "kmod-hostap-plx................. Host AP driver for Prism2/2.5/3 in PLX9052 based PCI adaptors"
tristate
default m if CONFIG_DEVEL
depends BR2_PACKAGE_KMOD_HOSTAP
default m if DEVEL
depends PACKAGE_KMOD_HOSTAP
help
Host AP support for Prism2/2.5/3 IEEE 802.11b" is required for this
driver and its help text includes more information about the Host AP

View File

@ -1,8 +1,8 @@
config BR2_PACKAGE_KMOD_IEEE80211_DSCAPE
config PACKAGE_KMOD_IEEE80211_DSCAPE
prompt "kmod-ieee80211-dscape............. IEEE 802.11 stack (devicescape)"
tristate
default n
depends BR2_LINUX_2_6_BRCM || BR2_LINUX_2_6_X86
depends LINUX_2_6_BRCM || LINUX_2_6_X86
help
IEEE 802.11 stack (devicescape)

View File

@ -1,7 +1,7 @@
config BR2_PACKAGE_KMOD_MADWIFI_OLD
config PACKAGE_KMOD_MADWIFI_OLD
prompt "kmod-madwifi-old.................. (old) Atheros Wifi driver"
tristate
default m if CONFIG_DEVEL
default m if DEVEL
default n
help
Madwifi-old driver for Atheros wireless adapters

View File

@ -26,10 +26,10 @@ endif
BUS := PCI
ifneq ($(BR2_LINUX_2_4_AR531X),)
ifneq ($(CONFIG_LINUX_2_4_AR531X),)
BUS := AHB
endif
# ifneq ($(BR2_LINUX_2_6_ARUBA),)
# ifneq ($(CONFIG_LINUX_2_6_ARUBA),)
# BUS := PCI AHB # no suitable HAL for AHB yet.
# endif

View File

@ -1,8 +1,8 @@
config BR2_PACKAGE_KMOD_MADWIFI
config PACKAGE_KMOD_MADWIFI
prompt "kmod-madwifi...................... Atheros Wifi driver"
tristate
default y if BR2_LINUX_2_6_BRCM || BR2_LINUX_2_6_ARUBA || BR2_LINUX_2_4_AR531X
default m if CONFIG_DEVEL
default y if LINUX_2_6_BRCM || LINUX_2_6_ARUBA || LINUX_2_4_AR531X
default m if DEVEL
default n
help
Driver for Atheros 802.11a/b/g MiniPCI cards

View File

@ -26,10 +26,10 @@ endif
BUS := PCI
ifneq ($(BR2_LINUX_2_4_AR531X),)
ifneq ($(CONFIG_LINUX_2_4_AR531X),)
BUS := AHB
endif
ifneq ($(BR2_LINUX_2_6_ARUBA),)
ifneq ($(CONFIG_LINUX_2_6_ARUBA),)
BUS := PCI AHB # no suitable HAL for AHB yet.
endif

View File

@ -1,6 +1,6 @@
config BR2_PACKAGE_KMOD_MINI_FO
config PACKAGE_KMOD_MINI_FO
prompt "kmod-mini_fo...................... mini fanout overlay file system"
tristate
default m if CONFIG_DEVEL
default m if DEVEL
help
The mini fanout overlay file system.

View File

@ -1,7 +1,7 @@
config BR2_PACKAGE_KMOD_OPENSWAN
config PACKAGE_KMOD_OPENSWAN
prompt "kmod-openswan..................... Openswan kernel module"
tristate
default m if CONFIG_DEVEL
default m if DEVEL
help
Openswan is an implementation of IPsec for Linux.

View File

@ -1,7 +1,7 @@
config BR2_PACKAGE_KMOD_SHFS
config PACKAGE_KMOD_SHFS
prompt "kmod-shfs......................... Shell FileSystem kernel module (ShFS) kernel module"
tristate
default m if CONFIG_DEVEL
default m if DEVEL
help
ShFS is a simple and easy to use Linux kernel module which
allows you to mount remote filesystems using a plain shell

View File

@ -1,7 +1,7 @@
config BR2_PACKAGE_KMOD_SPCA5XX
config PACKAGE_KMOD_SPCA5XX
prompt "kmod-spca5xx...................... Kernel driver for SPCA5XX based USB cameras"
tristate
default m if CONFIG_DEVEL
default m if DEVEL
help
Kernel driver for SPCA5XX based USB cameras

View File

@ -1,8 +1,8 @@
config BR2_PACKAGE_KMOD_SWITCH
config PACKAGE_KMOD_SWITCH
prompt "kmod-switch....................... Kernel driver for ROBO and ADMTEK SWITCH"
tristate
default y if BR2_LINUX_2_6_BRCM || BR2_LINUX_2_4_BRCM
default m if CONFIG_DEVEL
default y if LINUX_2_6_BRCM || LINUX_2_4_BRCM
default m if DEVEL
default n
help
Kernel driver for ROBO and ADMTEK switches.

View File

@ -1,8 +1,8 @@
config BR2_PACKAGE_KMOD_UEAGLE_ATM
config PACKAGE_KMOD_UEAGLE_ATM
prompt "kmod-ueagle-atm.................... Kernel driver for Eagle 8051 based USB ADSL modems"
tristate
depends BR2_LINUX_2_6_BRCM
default m if CONFIG_DEVEL
depends LINUX_2_6_BRCM
default m if DEVEL
help
Kernel driver for Eagle 8051 USB ADSL modems

View File

@ -1,17 +1,17 @@
config BR2_PACKAGE_KMOD_WLCOMPAT
config PACKAGE_KMOD_WLCOMPAT
prompt "kmod-wlcompat..................... Wrapper providing Wireless Extensions for Broadcom wl module"
tristate
default y
depends BR2_PACKAGE_KMOD_BRCM_WL || BR2_PACKAGE_KMOD_BRCM_WL2
depends PACKAGE_KMOD_BRCM_WL || PACKAGE_KMOD_BRCM_WL2
help
A wrapper module, that provides Wireless Extension support for the
proprietary Broadcom wl module.
config BR2_PACKAGE_KMOD_WLCOMPAT_DEBUG
config PACKAGE_KMOD_WLCOMPAT_DEBUG
prompt "kmod-wlcompat-debug............... Wrapper providing Wireless Extensions for Broadcom wl module (debug)"
tristate
default m
depends BR2_PACKAGE_KMOD_BRCM_WL || BR2_PACKAGE_KMOD_BRCM_WL2
depends PACKAGE_KMOD_BRCM_WL || PACKAGE_KMOD_BRCM_WL2
help
A wrapper module, that provides Wireless Extension support for the
proprietary Broadcom wl module. (debug version)

View File

@ -1,8 +1,8 @@
config BR2_PACKAGE_KMOD_ZD1211
config PACKAGE_KMOD_ZD1211
prompt "kmod-zd12111...................... Driver for Zydas 1211 based devices"
tristate
depends BR2_LINUX_2_6
default m if CONFIG_DEVEL
depends LINUX_2_6
default m if DEVEL
help
Linux driver for the ZyDAS ZD1211 802.11b/g USB-WLAN-Chip.
Initially contributed by ZyDAS, this driver is actively maintained

View File

@ -54,10 +54,10 @@ PKG_$(1) := $(PACKAGE_DIR)/kmod-$(2)_$(LINUX_VERSION)-$(BOARD)-$(LINUX_RELEASE)_
I_$(1) := $(KMOD_BUILD_DIR)/ipkg/$(2)
ifeq ($$(KDEPEND_$(1)),m)
ifneq ($(BR2_PACKAGE_KMOD_$(1)),)
ifneq ($(CONFIG_PACKAGE_KMOD_$(1)),)
TARGETS += $$(PKG_$(1))
endif
ifeq ($(BR2_PACKAGE_KMOD_$(1)),y)
ifeq ($(CONFIG_PACKAGE_KMOD_$(1)),y)
INSTALL_TARGETS += $$(PKG_$(1))
endif
endif

View File

@ -1,6 +1,6 @@
config BR2_PACKAGE_SDK
config PACKAGE_SDK
bool "OpenWrt SDK"
default y if CONFIG_DEVEL
default y if DEVEL
help
Build an OpenWrt SDK.
This is essentially a stripped-down version of the buildroot

View File

@ -27,7 +27,7 @@ $(BIN_DIR)/$(SDK_NAME).tar.bz2:
$(CP) ./files/README.SDK $(SDK_BUILD_DIR)/
$(CP) ./files/depend.mk $(SDK_BUILD_DIR)/package/
$(CP) $(TOPDIR)/package/rules.mk $(SDK_BUILD_DIR)/package/
egrep '^BR2_(ARCH|WGET|STAGING|JLEVEL|LARGEFILE|TARGET_OPT)' $(TOPDIR)/.config > $(SDK_BUILD_DIR)/.config
egrep '^CONFIG_(ARCH|WGET|STAGING|JLEVEL|LARGEFILE|TARGET_OPT)' $(TOPDIR)/.config > $(SDK_BUILD_DIR)/.config
find $(SDK_BUILD_DIR) -name .svn | xargs rm -rf
find $(SDK_BUILD_DIR) -name CVS | xargs rm -rf
(cd $(BUILD_DIR); \

View File

@ -5,7 +5,7 @@ include $(TOPDIR)/rules.mk
# build binutils for use on the host system
#
#############################################################
BINUTILS_VERSION:=$(strip $(subst ",, $(BR2_BINUTILS_VERSION)))
BINUTILS_VERSION:=$(strip $(subst ",, $(CONFIG_BINUTILS_VERSION)))
#"
BINUTILS_SITE:=http://www.fr.kernel.org/pub/linux/devel/binutils \

View File

@ -37,10 +37,10 @@ GCC_STRIP_HOST_BINARIES:=true
#
#############################################################
ifeq ($(BR2_INSTALL_LIBGCJ),y)
ifeq ($(CONFIG_INSTALL_LIBGCJ),y)
TARGET_LANGUAGES:=c,c++,java
else
ifeq ($(BR2_INSTALL_LIBSTDCPP),y)
ifeq ($(CONFIG_INSTALL_LIBSTDCPP),y)
TARGET_LANGUAGES:=c,c++
else
TARGET_LANGUAGES:=c
@ -71,7 +71,7 @@ $(GCC_DIR)/.patched: $(GCC_DIR)/.unpacked
# We can dispense with the custom spec files, as well as libfloat for the arm case.
# However, we still need a patch for arm. There's a similar patch for gcc 3.3.x
# which needs to be integrated so we can kill of libfloat for good.
ifeq ($(BR2_SOFT_FLOAT),y)
ifeq ($(CONFIG_SOFT_FLOAT),y)
ifeq ("$(strip $(ARCH))","arm")
$(SCRIPT_DIR)/patch-kernel.sh $(GCC_DIR) ./$(GCC_VERSION) arm-softfloat.patch.conditional
endif
@ -175,7 +175,7 @@ gcc-install: $(GCC_BUILD_DIR2)/.compiled
#
# Now for the ugly 3.3.x soft float hack...
#
ifeq ($(BR2_SOFT_FLOAT),y)
ifeq ($(CONFIG_SOFT_FLOAT),y)
ifeq ($(findstring 3.3.,$(GCC_VERSION)),3.3.)
# Make sure we have a soft float specs file for this arch
if [ ! -f ./$(GCC_VERSION)/specs-$(ARCH)-soft-float ] ; then \

View File

@ -1,6 +1,6 @@
comment "Gdb Options"
config BR2_PACKAGE_GDB_CLIENT
config PACKAGE_GDB_CLIENT
bool "Build gdb client for the Host"
default n
help

View File

@ -6,10 +6,10 @@ include $(TOPDIR)/rules.mk
#
#############################################################
ifeq ($(BR2_UCLIBC_VERSION_SNAPSHOT),y)
ifeq ($(CONFIG_UCLIBC_VERSION_SNAPSHOT),y)
# Be aware that this changes daily....
UCLIBC_DIR:=$(TOOL_BUILD_DIR)/uClibc
UCLIBC_SOURCE:=uClibc-$(strip $(subst ",, $(BR2_USE_UCLIBC_SNAPSHOT))).tar.bz2
UCLIBC_SOURCE:=uClibc-$(strip $(subst ",, $(CONFIG_USE_UCLIBC_SNAPSHOT))).tar.bz2
#"
UCLIBC_SITE:=http://www.uclibc.org/downloads/snapshots
UCLIBC_VER:=PKG_VERSION:=0.${shell date +"%G%m%d"}
@ -50,13 +50,13 @@ $(UCLIBC_DIR)/.configured: $(UCLIBC_DIR)/.unpacked
$(CP) ./files/config.$(ARCH) $(UCLIBC_DIR)/.config
$(SED) 's,^KERNEL_SOURCE=.*,KERNEL_SOURCE=\"$(LINUX_HEADERS_DIR)\",g' \
$(UCLIBC_DIR)/.config
ifeq ($(BR2_LARGEFILE),y)
ifeq ($(CONFIG_LARGEFILE),y)
$(SED) 's,^.*UCLIBC_HAS_LFS.*,UCLIBC_HAS_LFS=y,g' $(UCLIBC_DIR)/.config
else
$(SED) 's,^.*UCLIBC_HAS_LFS.*,UCLIBC_HAS_LFS=n,g' $(UCLIBC_DIR)/.config
endif
$(SED) 's,.*UCLIBC_HAS_WCHAR.*,UCLIBC_HAS_WCHAR=y,g' $(UCLIBC_DIR)/.config
ifeq ($(BR2_SOFT_FLOAT),y)
ifeq ($(CONFIG_SOFT_FLOAT),y)
$(SED) 's,.*HAS_FPU.*,HAS_FPU=n\nUCLIBC_HAS_FLOATS=y\nUCLIBC_HAS_SOFT_FLOAT=y,g' $(UCLIBC_DIR)/.config
endif
mkdir -p $(TOOL_BUILD_DIR)/uClibc_dev/usr/include