fix dependency problem
git-svn-id: svn://svn.openwrt.org/openwrt/trunk/openwrt@1752 3c298f89-4303-0410-b956-a3cf2f4a3e73master
Felix Fietkau
parent
e3d4482e20
commit
1a001483d2
|
|
@ -36,12 +36,13 @@ $(IDIR_OPENWRT):
|
|||
$(SED) s,base-files-arch,base-files-$(BOARD),g $(IDIR_OPENWRT)/CONTROL/control
|
||||
|
||||
$(IPKG_OPENWRT): $(IDIR_OPENWRT)
|
||||
mkdir -p $(IDIR_OPENWRT)/etc
|
||||
cp files/network.overrides.$(BOARD) $(IDIR_OPENWRT)/etc/network.overrides
|
||||
mkdir -p $(IDIR_OPENWRT)/etc/init.d
|
||||
[ -f files/network.overrides.$(BOARD) ] && cp files/network.overrides.$(BOARD) $(IDIR_OPENWRT)/etc/network.overrides
|
||||
[ -f files/S05nvram.$(BOARD) ] && install -m0755 files/S05nvram.$(BOARD) $(IDIR_OPENWRT)/etc/init.d/S05nvram
|
||||
$(RSTRIP) $(IDIR_OPENWRT)
|
||||
$(IPKG_BUILD) $(IDIR_OPENWRT) $(PACKAGE_DIR)
|
||||
|
||||
install: $(IPKG_OPENWRT)
|
||||
install: compile
|
||||
$(IPKG) install $(IPKG_OPENWRT)
|
||||
compile: install-dev $(IPKG_OPENWRT)
|
||||
install-dev:
|
||||
|
|
|
|||
|
|
@ -0,0 +1,102 @@
|
|||
# NVRAM setup
|
||||
#
|
||||
# This file handles the NVRAM quirks of various hardware.
|
||||
|
||||
. /etc/network.overrides
|
||||
alias debug=${DEBUG:-:}
|
||||
|
||||
remap () {
|
||||
for type in lan wifi wan pppoe
|
||||
do
|
||||
for s in '' s
|
||||
do
|
||||
eval nvram set ${type}_ifname$s=\"$(nvram get ${type}_ifname$s|sed s/$1/$2/g)\"
|
||||
done
|
||||
done
|
||||
}
|
||||
|
||||
nvram_default() {
|
||||
[ -z "$(nvram get $1)" ] && nvram set "$1=$2"
|
||||
}
|
||||
|
||||
# linksys bug; remove when not using static configuration for lan
|
||||
nvram set lan_proto="static"
|
||||
|
||||
# hacks for wrt54g 1.x hardware
|
||||
[ "$(nvram get boardnum)" = "42" \
|
||||
-a "$(nvram get boardtype)" = "bcm94710dev" ] && {
|
||||
debug "### wrt54g 1.x hack ###"
|
||||
nvram set vlan1hwname="et0"
|
||||
nvram set vlan2hwname="et0"
|
||||
remap eth0 vlan2
|
||||
remap eth1 vlan1
|
||||
}
|
||||
|
||||
# hacks for asus wl-500g deluxe
|
||||
[ "$(nvram get boardtype)" = "bcm95365r" \
|
||||
-a "$(nvram get boardnum)" = "45" ] && {
|
||||
debug "### wl-500g deluxe hacks ###"
|
||||
nvram set vlan0hwname="et0"
|
||||
nvram set vlan1hwname="et0"
|
||||
remap eth0.1 vlan0
|
||||
remap eth0 vlan1
|
||||
|
||||
# set up the vlan*ports variables for the asus wl-500g deluxe
|
||||
# if they don't already exist
|
||||
nvram_default vlan0ports "1 2 3 4 5*"
|
||||
nvram_default vlan1ports "0 5"
|
||||
}
|
||||
|
||||
# hacks for asus wl-300g
|
||||
[ "$(nvram get productid)" = "WL300g" ] && {
|
||||
debug "### wl-300g hacks ###"
|
||||
nvram set lan_ifnames="eth0 eth2"
|
||||
nvram set wan_ifname="none"
|
||||
}
|
||||
|
||||
# hacks for asus wl-hdd
|
||||
[ "$(nvram get productid)" = "WLHDD" ] && {
|
||||
debug "### wl-hdd hacks ###"
|
||||
nvram set lan_ifnames="eth1 eth2"
|
||||
nvram set wan_ifname="none"
|
||||
}
|
||||
|
||||
# hacks for wap54g hardware
|
||||
[ "$(nvram get boardnum)" = "2" \
|
||||
-o "$(nvram get boardnum)" = "1024" ] && {
|
||||
debug "### wap54g hack ###"
|
||||
nvram set wan_ifname="none"
|
||||
}
|
||||
|
||||
# hacks for buffalo wla2-g54l
|
||||
[ "$(nvram get boardnum)" = "00" \
|
||||
-a "$(nvram get product_name)" = "Product_name" \
|
||||
-o "$(nvram get product_name)" = "WLA2-G54L" ] && {
|
||||
debug "### wla2-g54l hacks ###"
|
||||
nvram set wan_ifname="none"
|
||||
nvram set lan_ifnames="vlan0"
|
||||
}
|
||||
|
||||
# needed at least for wrt54gs v1.1 and wrt54g v2.0, v2.2
|
||||
[ \! -z "$(nvram get boardrev)" ] && {
|
||||
nvram set wl0id=0x4320
|
||||
}
|
||||
|
||||
# defaults
|
||||
nvram_default lan_ifname "br0"
|
||||
nvram_default lan_ifnames "$FAILSAFE_ifnames"
|
||||
|
||||
nvram_default wan_ifname "vlan1"
|
||||
nvram_default wan_proto "dhcp"
|
||||
|
||||
nvram_default wl0_ssid OpenWrt
|
||||
nvram_default wl0_mode ap
|
||||
nvram_default wl0_infra 1
|
||||
nvram_default wl0_radio 1
|
||||
|
||||
[ "$(nvram get il0macaddr)" = "00:90:4c:5f:00:2a" ] && {
|
||||
# if default wifi mac, set two higher than the lan mac
|
||||
nvram set il0macaddr=$(nvram get et0macaddr|
|
||||
awk '{OFS=FS=":";for(x=7,y=2;--x;){$x=sprintf("%02x",(y+="0x"$x)%256);y/=256}print}')
|
||||
}
|
||||
|
||||
|
|
@ -6,82 +6,23 @@
|
|||
# Load sysconf defaults
|
||||
[ -f /etc/sysconf ] && . /etc/sysconf
|
||||
|
||||
# linksys bug; remove when not using static configuration for lan
|
||||
lan_proto="static"
|
||||
|
||||
remap () {
|
||||
for type in lan wifi wan pppoe
|
||||
do
|
||||
for s in '' s
|
||||
do
|
||||
eval ${type}_ifname$s=\"$(nvram get ${type}_ifname$s|sed s/$1/$2/g)\"
|
||||
done
|
||||
done
|
||||
}
|
||||
|
||||
# hacks for wrt54g 1.x hardware
|
||||
[ "$(nvram get boardnum)" = "42" \
|
||||
-a "$(nvram get boardtype)" = "bcm94710dev" ] && {
|
||||
debug "### wrt54g 1.x hack ###"
|
||||
vlan1hwname="et0"
|
||||
vlan2hwname="et0"
|
||||
FAILSAFE_ifnames="vlan1 vlan2 eth2"
|
||||
remap eth0 vlan2
|
||||
remap eth1 vlan1
|
||||
}
|
||||
-a "$(nvram get boardtype)" = "bcm94710dev" ] && FAILSAFE_ifnames="vlan1 vlan2 eth2"
|
||||
|
||||
# hacks for asus wl-500g deluxe
|
||||
[ "$(nvram get boardtype)" = "bcm95365r" \
|
||||
-a "$(nvram get boardnum)" = "45" ] && {
|
||||
debug "### wl-500g deluxe hacks ###"
|
||||
vlan0hwname="et0"
|
||||
vlan1hwname="et0"
|
||||
FAILSAFE_ifnames="vlan0 eth1"
|
||||
remap eth0.1 vlan0
|
||||
remap eth0 vlan1
|
||||
}
|
||||
|
||||
# hacks for asus wl-300g
|
||||
[ "$(nvram get productid)" = "WL300g" ] && {
|
||||
debug "### wl-300g hacks ###"
|
||||
lan_ifnames="eth0 eth2"
|
||||
wan_ifname="none"
|
||||
}
|
||||
-a "$(nvram get boardnum)" = "45" ] && FAILSAFE_ifnames="vlan0 eth1"
|
||||
|
||||
# hacks for wap54g hardware
|
||||
[ "$(nvram get boardnum)" = "2" \
|
||||
-o "$(nvram get boardnum)" = "1024" ] && {
|
||||
debug "### wap54g hack ###"
|
||||
wan_ifname="none"
|
||||
FAILSAFE_ifnames="eth0 eth1"
|
||||
}
|
||||
|
||||
# hacks for buffalo wla2-g54l
|
||||
[ "$(nvram get boardnum)" = "00" \
|
||||
-a "$(nvram get product_name)" = "Product_name" \
|
||||
-o "$(nvram get product_name)" = "WLA2-G54L" ] && {
|
||||
debug "### wla2-g54l hacks ###"
|
||||
wan_ifname="none"
|
||||
lan_ifnames="vlan0"
|
||||
}
|
||||
-o "$(nvram get boardnum)" = "1024" ] && FAILSAFE_ifnames="eth0 eth1"
|
||||
|
||||
# hack for asus wl-500g hardware
|
||||
[ "$(nvram get boardnum)" = "asusX" \
|
||||
-a "$(nvram get boardtype)" = "bcm94710dev" ] && {
|
||||
FAILSAFE_ifnames="eth0 eth2"
|
||||
}
|
||||
|
||||
# defaults if lan_ifname is missing
|
||||
[ -z "$(nvram get lan_ifname)" ] && {
|
||||
lan_ifname="br0"
|
||||
lan_ifnames=${FAILSAFE_ifnames:-"vlan0 vlan2 eth1 eth2 eth3"}
|
||||
}
|
||||
|
||||
# defaults if wan_ifname is missing
|
||||
[ -z "$(nvram get wan_ifname)" ] && {
|
||||
wan_ifname="vlan1"
|
||||
wan_proto="dhcp"
|
||||
}
|
||||
[ "$(nvram get boardnum)" = "asusX" \
|
||||
-a "$(nvram get boardtype)" = "bcm94710dev" ] && FAILSAFE_ifnames="eth0 eth1 eth2"
|
||||
|
||||
FAILSAFE_ifnames=${FAILSAFE_ifnames:-"vlan0 vlan1 eth1 eth2 eth3"}
|
||||
|
||||
DEFAULT_lan_ipaddr=${BR2_SYSCONF_FAILSAFE_IP:-"192.168.1.1"}
|
||||
DEFAULT_lan_netmask=${BR2_SYSCONF_FAILSAFE_NETMASK:-"255.255.255.0"}
|
||||
|
|
@ -90,11 +31,11 @@ DEFAULT_lan_hwaddr=${BR2_SYSCONF_FAILSAFE_MAC:-"00:0B:AD:0A:DD:00"}
|
|||
# failsafe if reset is held
|
||||
[ "$FAILSAFE" = "true" ] && {
|
||||
echo "### YOU ARE IN FAILSAFE MODE ####"
|
||||
lan_ifname="br0"
|
||||
lan_ifnames=${FAILSAFE_ifnames:-"vlan0 vlan1 eth1 eth2 eth3"}
|
||||
lan_ipaddr=$DEFAULT_lan_ipaddr
|
||||
lan_netmask=$DEFAULT_lan_netmask
|
||||
lan_hwaddr=$DEFAULT_lan_hwaddr
|
||||
wan_ifname="none"
|
||||
wifi_ifname="none"
|
||||
NVRAM_lan_ifname="br0"
|
||||
NVRAM_lan_ifnames=$FAILSAFE_ifnames
|
||||
NVRAM_lan_ipaddr=DEFAULT_lan_ipaddr
|
||||
NVRAM_lan_netmask=DEFAULT_lan_netmask
|
||||
NVRAM_lan_hwaddr=DEFAULT_lan_hwaddr
|
||||
NVRAM_wan_ifname="none"
|
||||
NVRAM_wifi_ifname="none"
|
||||
}
|
||||
|
|
|
|||
Loading…
Reference in New Issue