diff --git a/target/linux/brcm63xx/patches-2.6.35/211-nxp-74hc164-gpio-chip-driver.patch b/target/linux/brcm63xx/patches-2.6.35/211-gen-74x164-gpio-chip-driver.patch similarity index 56% rename from target/linux/brcm63xx/patches-2.6.35/211-nxp-74hc164-gpio-chip-driver.patch rename to target/linux/brcm63xx/patches-2.6.35/211-gen-74x164-gpio-chip-driver.patch index db88c16963..105eb6d57e 100644 --- a/target/linux/brcm63xx/patches-2.6.35/211-nxp-74hc164-gpio-chip-driver.patch +++ b/target/linux/brcm63xx/patches-2.6.35/211-gen-74x164-gpio-chip-driver.patch @@ -1,25 +1,27 @@ --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig -@@ -343,4 +343,12 @@ config GPIO_JANZ_TTL - This driver provides support for driving the pins in output - mode only. Input mode is not supported. +@@ -321,6 +321,14 @@ config GPIO_MC33880 + SPI driver for Freescale MC33880 high-side/low-side switch. + This provides GPIO interface supporting inputs and outputs. -+comment "Other GPIO expanders" ++config GPIO_74X164 ++ tristate "74x164 serial-in/parallel-out 8-bits shift register" ++ depends on SPI_MASTER ++ help ++ Platform driver for 74x164 compatible serial-in/parallel-out ++ 8-outputs shift registers. This driver can be used to provide access ++ to more gpio outputs. + -+config GPIO_NXP_74HC164 -+ tristate "NXP 74HC164 Output expanders" -+ help -+ Platform driver for NXP 74HC164 8-output Expanders. This -+ provides a GPIO interface supporting outputs. -+ - endif + comment "AC97 GPIO expanders:" + + config GPIO_UCB1400 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_GPIO_MAX7301) += max7301.o obj-$(CONFIG_GPIO_MAX732X) += max732x.o obj-$(CONFIG_GPIO_MC33880) += mc33880.o obj-$(CONFIG_GPIO_MCP23S08) += mcp23s08.o -+obj-$(CONFIG_GPIO_NXP_74HC164) += nxp_74hc164.o ++obj-$(CONFIG_GPIO_74X164) += 74x164.o obj-$(CONFIG_GPIO_PCA953X) += pca953x.o obj-$(CONFIG_GPIO_PCF857X) += pcf857x.o obj-$(CONFIG_GPIO_PL061) += pl061.o @@ -253,27 +255,203 @@ +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:" NXP_74HC164_DRIVER_NAME); --- /dev/null -+++ b/include/linux/nxp_74hc164.h -@@ -0,0 +1,22 @@ ++++ b/drivers/gpio/74x164.c +@@ -0,0 +1,184 @@ +/* -+ * NXP 74HC164 - Dual 4-input multiplexer defines ++ * 74Hx164 - Generic serial-in/parallel-out 8-bits shift register GPIO driver + * + * Copyright (C) 2010 Gabor Juhos ++ * Copyright (C) 2010 Miguel Gaio + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + -+#ifndef _NXP_74HC164_H -+#define _NXP_74HC164_H ++#include ++#include ++#include ++#include ++#include ++#include + -+#define NXP_74HC164_DRIVER_NAME "nxp-74hc164" ++#define GEN_74X164_GPIO_COUNT 8 + -+struct nxp_74hc164_platform_data { -+ unsigned gpio_base; -+ unsigned gpio_pin_data; -+ unsigned gpio_pin_clk; ++ ++struct gen_74x164_chip { ++ struct spi_device *spi; ++ struct gpio_chip gpio_chip; ++ struct mutex lock; ++ u8 port_config; +}; + -+#endif /* _NXP_74HC164_H */ ++static void gen_74x164_set_value(struct gpio_chip *, unsigned, int); ++ ++static struct gen_74x164_chip *gpio_to_chip(struct gpio_chip *gc) ++{ ++ return container_of(gc, struct gen_74x164_chip, gpio_chip); ++} ++ ++static int __gen_74x164_write_config(struct gen_74x164_chip *chip) ++{ ++ return spi_write(chip->spi, ++ &chip->port_config, sizeof(chip->port_config)); ++} ++ ++static int gen_74x164_direction_output(struct gpio_chip *gc, ++ unsigned offset, int val) ++{ ++ gen_74x164_set_value(gc, offset, val); ++ return 0; ++} ++ ++static int gen_74x164_get_value(struct gpio_chip *gc, unsigned offset) ++{ ++ struct gen_74x164_chip *chip = gpio_to_chip(gc); ++ int ret; ++ ++ mutex_lock(&chip->lock); ++ ret = (chip->port_config >> offset) & 0x1; ++ mutex_unlock(&chip->lock); ++ ++ return ret; ++} ++ ++static void gen_74x164_set_value(struct gpio_chip *gc, ++ unsigned offset, int val) ++{ ++ struct gen_74x164_chip *chip = gpio_to_chip(gc); ++ bool refresh; ++ ++ mutex_lock(&chip->lock); ++ if (val) ++ chip->port_config |= (1 << offset); ++ else ++ chip->port_config &= ~(1 << offset); ++ ++ __gen_74x164_write_config(chip); ++ mutex_unlock(&chip->lock); ++} ++ ++static int __devinit gen_74x164_probe(struct spi_device *spi) ++{ ++ struct gen_74x164_chip *chip; ++ struct gen_74x164_chip_platform_data *pdata; ++ int ret; ++ ++ pdata = spi->dev.platform_data; ++ if (!pdata || !pdata->base) { ++ dev_dbg(&spi->dev, "incorrect or missing platform data\n"); ++ return -EINVAL; ++ } ++ ++ /* ++ * bits_per_word cannot be configured in platform data ++ */ ++ spi->bits_per_word = 8; ++ ++ ret = spi_setup(spi); ++ if (ret < 0) ++ return ret; ++ ++ chip = kzalloc(sizeof(*chip), GFP_KERNEL); ++ if (!chip) ++ return -ENOMEM; ++ ++ mutex_init(&chip->lock); ++ ++ dev_set_drvdata(&spi->dev, chip); ++ ++ chip->spi = spi; ++ ++ chip->gpio_chip.label = GEN_74X164_DRIVER_NAME, ++ chip->gpio_chip.direction_output = gen_74x164_direction_output; ++ chip->gpio_chip.get = gen_74x164_get_value; ++ chip->gpio_chip.set = gen_74x164_set_value; ++ chip->gpio_chip.base = pdata->base; ++ chip->gpio_chip.ngpio = GEN_74X164_GPIO_COUNT; ++ chip->gpio_chip.can_sleep = 1; ++ chip->gpio_chip.dev = &spi->dev; ++ chip->gpio_chip.owner = THIS_MODULE; ++ ++ ret = __gen_74x164_write_config(chip); ++ if (ret) { ++ dev_err(&spi->dev, "Failed writing: %d\n", ret); ++ goto exit_destroy; ++ } ++ ++ ret = gpiochip_add(&chip->gpio_chip); ++ if (ret) ++ goto exit_destroy; ++ ++ return ret; ++ ++exit_destroy: ++ dev_set_drvdata(&spi->dev, NULL); ++ mutex_destroy(&chip->lock); ++ kfree(chip); ++ return ret; ++} ++ ++static int gen_74x164_remove(struct spi_device *spi) ++{ ++ struct gen_74x164_chip *chip; ++ int ret; ++ ++ chip = dev_get_drvdata(&spi->dev); ++ if (chip == NULL) ++ return -ENODEV; ++ ++ dev_set_drvdata(&spi->dev, NULL); ++ ++ ret = gpiochip_remove(&chip->gpio_chip); ++ if (!ret) { ++ mutex_destroy(&chip->lock); ++ kfree(chip); ++ } else ++ dev_err(&spi->dev, "Failed to remove the GPIO controller: %d\n", ++ ret); ++ ++ return ret; ++} ++ ++static struct spi_driver gen_74x164_driver = { ++ .driver = { ++ .name = GEN_74X164_DRIVER_NAME, ++ .owner = THIS_MODULE, ++ }, ++ .probe = gen_74x164_probe, ++ .remove = __devexit_p(gen_74x164_remove), ++}; ++ ++static int __init gen_74x164_init(void) ++{ ++ return spi_register_driver(&gen_74x164_driver); ++} ++subsys_initcall(gen_74x164_init); ++ ++static void __exit gen_74x164_exit(void) ++{ ++ spi_unregister_driver(&gen_74x164_driver); ++} ++module_exit(gen_74x164_exit); ++ ++MODULE_AUTHOR("Gabor Juhos "); ++MODULE_AUTHOR("Miguel Gaio "); ++MODULE_DESCRIPTION("GPIO expander driver for 74X164 8-bits shift register"); ++MODULE_LICENSE("GPL v2"); ++ +--- /dev/null ++++ b/include/linux/spi/74x164.h +@@ -0,0 +1,11 @@ ++#ifndef LINUX_SPI_74X164_H ++#define LINUX_SPI_74X164_H ++ ++#define GEN_74X164_DRIVER_NAME "74x164" ++ ++struct gen_74x164_chip_platform_data { ++ /* number assigned to the first GPIO */ ++ unsigned base; ++}; ++ ++#endif