From 0d96f5908597f25dcf2fbd1a72907e143243f35c Mon Sep 17 00:00:00 2001 From: Imre Kaloz Date: Wed, 3 Jun 2009 13:42:28 +0000 Subject: [PATCH] upgrade to 2.6.30-rc8 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16307 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- target/linux/avr32/Makefile | 2 +- .../000-revert_usart_pin_selection.patch | 229 ------------------ .../avr32/patches/001-fix_usart_clash.patch | 22 ++ target/linux/cobalt/Makefile | 2 +- target/linux/etrax/Makefile | 2 +- target/linux/gemini/Makefile | 2 +- .../linux/gemini/patches/001-git_sync.patch | 14 +- .../patches-2.6.30/208-rtl8110sb_fix.patch | 42 ---- .../patches-2.6.30/680-phy_ar8216.patch | 10 +- .../801-usb_serial_endpoint_size.patch | 2 +- .../840-unable_to_open_console.patch | 2 +- .../patches-2.6.30/922-gpiommc.patch | 2 +- .../991-mv643xx_eth_coherent_dma_mask.patch | 112 --------- .../999-use_preinit_as_init.patch | 2 +- target/linux/kirkwood/Makefile | 2 +- .../linux/kirkwood/patches/003-gating.patch | 2 +- target/linux/octeon/Makefile | 2 +- .../001-handle_removal_h_constraint.patch | 6 +- target/linux/rb532/Makefile | 2 +- target/linux/s3c24xx/Makefile | 2 +- ...ont-override-logo-with-early-printks.patch | 11 +- .../patches-2.6.30/031-add-openwrt-logo.patch | 28 +-- .../040-rename-serialdevs.patch | 2 +- target/linux/sibyte/Makefile | 2 +- 24 files changed, 69 insertions(+), 435 deletions(-) delete mode 100644 target/linux/avr32/patches/000-revert_usart_pin_selection.patch create mode 100644 target/linux/avr32/patches/001-fix_usart_clash.patch delete mode 100644 target/linux/generic-2.6/patches-2.6.30/208-rtl8110sb_fix.patch delete mode 100644 target/linux/generic-2.6/patches-2.6.30/991-mv643xx_eth_coherent_dma_mask.patch diff --git a/target/linux/avr32/Makefile b/target/linux/avr32/Makefile index 7ee7266c4a..b26ddced17 100644 --- a/target/linux/avr32/Makefile +++ b/target/linux/avr32/Makefile @@ -10,7 +10,7 @@ ARCH:=avr32 BOARD:=avr32 BOARDNAME:=Atmel AVR32 FEATURES:=squashfs -LINUX_VERSION:=2.6.30-rc7 +LINUX_VERSION:=2.6.30-rc8 include $(INCLUDE_DIR)/target.mk diff --git a/target/linux/avr32/patches/000-revert_usart_pin_selection.patch b/target/linux/avr32/patches/000-revert_usart_pin_selection.patch deleted file mode 100644 index 075743b4eb..0000000000 --- a/target/linux/avr32/patches/000-revert_usart_pin_selection.patch +++ /dev/null @@ -1,229 +0,0 @@ ---- a/arch/avr32/boards/atngw100/setup.c -+++ b/arch/avr32/boards/atngw100/setup.c -@@ -118,7 +118,7 @@ static void __init set_hw_addr(struct pl - - void __init setup_board(void) - { -- at32_map_usart(1, 0, 0); /* USART 1: /dev/ttyS0, DB9 */ -+ at32_map_usart(1, 0); /* USART 1: /dev/ttyS0, DB9 */ - at32_setup_serial_console(0); - } - ---- a/arch/avr32/boards/atstk1000/atstk1002.c -+++ b/arch/avr32/boards/atstk1000/atstk1002.c -@@ -252,12 +252,12 @@ static void __init atstk1002_setup_extda - void __init setup_board(void) - { - #ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM -- at32_map_usart(0, 1, 0); /* USART 0/B: /dev/ttyS1, IRDA */ -+ at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */ - #else -- at32_map_usart(1, 0, 0); /* USART 1/A: /dev/ttyS0, DB9 */ -+ at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */ - #endif - /* USART 2/unused: expansion connector */ -- at32_map_usart(3, 2, 0); /* USART 3/C: /dev/ttyS2, DB9 */ -+ at32_map_usart(3, 2); /* USART 3/C: /dev/ttyS2, DB9 */ - - at32_setup_serial_console(0); - } ---- a/arch/avr32/boards/atstk1000/atstk1003.c -+++ b/arch/avr32/boards/atstk1000/atstk1003.c -@@ -115,12 +115,12 @@ static void __init atstk1003_setup_extda - void __init setup_board(void) - { - #ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM -- at32_map_usart(0, 1, 0); /* USART 0/B: /dev/ttyS1, IRDA */ -+ at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */ - #else -- at32_map_usart(1, 0, 0); /* USART 1/A: /dev/ttyS0, DB9 */ -+ at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */ - #endif - /* USART 2/unused: expansion connector */ -- at32_map_usart(3, 2, 0); /* USART 3/C: /dev/ttyS2, DB9 */ -+ at32_map_usart(3, 2); /* USART 3/C: /dev/ttyS2, DB9 */ - - at32_setup_serial_console(0); - } ---- a/arch/avr32/boards/atstk1000/atstk1004.c -+++ b/arch/avr32/boards/atstk1000/atstk1004.c -@@ -120,12 +120,12 @@ static void __init atstk1004_setup_extda - void __init setup_board(void) - { - #ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM -- at32_map_usart(0, 1, 0); /* USART 0/B: /dev/ttyS1, IRDA */ -+ at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */ - #else -- at32_map_usart(1, 0, 0); /* USART 1/A: /dev/ttyS0, DB9 */ -+ at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */ - #endif - /* USART 2/unused: expansion connector */ -- at32_map_usart(3, 2, 0); /* USART 3/C: /dev/ttyS2, DB9 */ -+ at32_map_usart(3, 2); /* USART 3/C: /dev/ttyS2, DB9 */ - - at32_setup_serial_console(0); - } ---- a/arch/avr32/boards/favr-32/setup.c -+++ b/arch/avr32/boards/favr-32/setup.c -@@ -250,7 +250,7 @@ static void __init favr32_setup_atmel_pw - - void __init setup_board(void) - { -- at32_map_usart(3, 0, 0); /* USART 3 => /dev/ttyS0 */ -+ at32_map_usart(3, 0); /* USART 3 => /dev/ttyS0 */ - at32_setup_serial_console(0); - } - ---- a/arch/avr32/boards/hammerhead/setup.c -+++ b/arch/avr32/boards/hammerhead/setup.c -@@ -165,7 +165,7 @@ static void __init set_hw_addr(struct pl - - void __init setup_board(void) - { -- at32_map_usart(1, 0, 0); /* USART 1: /dev/ttyS0, DB9 */ -+ at32_map_usart(1, 0); /* USART 1: /dev/ttyS0, DB9 */ - at32_setup_serial_console(0); - } - ---- a/arch/avr32/boards/merisc/setup.c -+++ b/arch/avr32/boards/merisc/setup.c -@@ -231,9 +231,9 @@ static void detect_merisc_board_id(void) - - void __init setup_board(void) - { -- at32_map_usart(0, 0, 0); -- at32_map_usart(1, 1, 0); -- at32_map_usart(3, 3, 0); -+ at32_map_usart(0, 0); -+ at32_map_usart(1, 1); -+ at32_map_usart(3, 3); - at32_setup_serial_console(1); - } - -@@ -248,7 +248,7 @@ static int __init merisc_init(void) - at32_reserve_pin(GPIO_PIOE_BASE, ATMEL_EBI_PE_DATA_ALL | (1 << 26)); - - if (merisc_board_id >= 1) -- at32_map_usart(2, 2, 0); -+ at32_map_usart(2, 2); - - at32_add_device_usart(0); - at32_add_device_usart(1); ---- a/arch/avr32/boards/mimc200/setup.c -+++ b/arch/avr32/boards/mimc200/setup.c -@@ -175,10 +175,10 @@ static void __init set_hw_addr(struct pl - - void __init setup_board(void) - { -- at32_map_usart(0, 0, 0); /* USART 0: /dev/ttyS0 (TTL --> Altera) */ -- at32_map_usart(1, 1, 0); /* USART 1: /dev/ttyS1 (RS232) */ -- at32_map_usart(2, 2, 0); /* USART 2: /dev/ttyS2 (RS485) */ -- at32_map_usart(3, 3, 0); /* USART 3: /dev/ttyS3 (RS422 Multidrop) */ -+ at32_map_usart(0, 0); /* USART 0: /dev/ttyS0 (TTL --> Altera) */ -+ at32_map_usart(1, 1); /* USART 1: /dev/ttyS1 (RS232) */ -+ at32_map_usart(2, 2); /* USART 2: /dev/ttyS2 (RS485) */ -+ at32_map_usart(3, 3); /* USART 3: /dev/ttyS3 (RS422 Multidrop) */ - } - - static struct i2c_gpio_platform_data i2c_gpio_data = { ---- a/arch/avr32/mach-at32ap/at32ap700x.c -+++ b/arch/avr32/mach-at32ap/at32ap700x.c -@@ -966,68 +966,56 @@ static struct resource atmel_usart3_reso - DEFINE_DEV_DATA(atmel_usart, 3); - DEV_CLK(usart, atmel_usart3, pba, 6); - --static inline void configure_usart0_pins(int flags) -+static inline void configure_usart0_pins(void) - { - u32 pin_mask = (1 << 8) | (1 << 9); /* RXD & TXD */ -- if (flags & ATMEL_USART_RTS) pin_mask |= (1 << 6); -- if (flags & ATMEL_USART_CTS) pin_mask |= (1 << 7); -- if (flags & ATMEL_USART_CLK) pin_mask |= (1 << 10); - - select_peripheral(PIOA, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP); - } - --static inline void configure_usart1_pins(int flags) -+static inline void configure_usart1_pins(void) - { - u32 pin_mask = (1 << 17) | (1 << 18); /* RXD & TXD */ -- if (flags & ATMEL_USART_RTS) pin_mask |= (1 << 19); -- if (flags & ATMEL_USART_CTS) pin_mask |= (1 << 20); -- if (flags & ATMEL_USART_CLK) pin_mask |= (1 << 16); - - select_peripheral(PIOA, pin_mask, PERIPH_A, AT32_GPIOF_PULLUP); - } - --static inline void configure_usart2_pins(int flags) -+static inline void configure_usart2_pins(void) - { - u32 pin_mask = (1 << 26) | (1 << 27); /* RXD & TXD */ -- if (flags & ATMEL_USART_RTS) pin_mask |= (1 << 30); -- if (flags & ATMEL_USART_CTS) pin_mask |= (1 << 29); -- if (flags & ATMEL_USART_CLK) pin_mask |= (1 << 28); - - select_peripheral(PIOB, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP); - } - --static inline void configure_usart3_pins(int flags) -+static inline void configure_usart3_pins(void) - { - u32 pin_mask = (1 << 18) | (1 << 17); /* RXD & TXD */ -- if (flags & ATMEL_USART_RTS) pin_mask |= (1 << 16); -- if (flags & ATMEL_USART_CTS) pin_mask |= (1 << 15); -- if (flags & ATMEL_USART_CLK) pin_mask |= (1 << 19); - - select_peripheral(PIOB, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP); - } - - static struct platform_device *__initdata at32_usarts[4]; - --void __init at32_map_usart(unsigned int hw_id, unsigned int line, int flags) -+void __init at32_map_usart(unsigned int hw_id, unsigned int line) - { - struct platform_device *pdev; - - switch (hw_id) { - case 0: - pdev = &atmel_usart0_device; -- configure_usart0_pins(flags); -+ configure_usart0_pins(); - break; - case 1: - pdev = &atmel_usart1_device; -- configure_usart1_pins(flags); -+ configure_usart1_pins(); - break; - case 2: - pdev = &atmel_usart2_device; -- configure_usart2_pins(flags); -+ configure_usart2_pins(); - break; - case 3: - pdev = &atmel_usart3_device; -- configure_usart3_pins(flags); -+ configure_usart3_pins(); - break; - default: - return; ---- a/arch/avr32/mach-at32ap/include/mach/board.h -+++ b/arch/avr32/mach-at32ap/include/mach/board.h -@@ -26,17 +26,12 @@ static inline void __deprecated at32_add - #define ATMEL_MAX_UART 4 - extern struct platform_device *atmel_default_console_device; - --/* Flags for selecting USART extra pins */ --#define ATMEL_USART_RTS 0x01 --#define ATMEL_USART_CTS 0x02 --#define ATMEL_USART_CLK 0x03 -- - struct atmel_uart_data { - short use_dma_tx; /* use transmit DMA? */ - short use_dma_rx; /* use receive DMA? */ - void __iomem *regs; /* virtual base address, if any */ - }; --void at32_map_usart(unsigned int hw_id, unsigned int line, int flags); -+void at32_map_usart(unsigned int hw_id, unsigned int line); - struct platform_device *at32_add_device_usart(unsigned int id); - - struct eth_platform_data { diff --git a/target/linux/avr32/patches/001-fix_usart_clash.patch b/target/linux/avr32/patches/001-fix_usart_clash.patch new file mode 100644 index 0000000000..54657fd542 --- /dev/null +++ b/target/linux/avr32/patches/001-fix_usart_clash.patch @@ -0,0 +1,22 @@ +Fix clash in ATMEL_USART_ flags + +At the moment ATMEL_USART_{RTS,CTS,CLK} have the values +1, 2 and 3 respectively. Given these are used in bitmasks, +trying to turn on the CLK line will in fact turn on the +RTS and CTS lines as well. + +Change the value of ATMEL_USART_CLK to 4. + +Signed-off-by: Ben Nizette +--- +--- a/arch/avr32/mach-at32ap/include/mach/board.h ++++ b/arch/avr32/mach-at32ap/include/mach/board.h +@@ -29,7 +29,7 @@ extern struct platform_device *atmel_def + /* Flags for selecting USART extra pins */ + #define ATMEL_USART_RTS 0x01 + #define ATMEL_USART_CTS 0x02 +-#define ATMEL_USART_CLK 0x03 ++#define ATMEL_USART_CLK 0x04 + + struct atmel_uart_data { + short use_dma_tx; /* use transmit DMA? */ diff --git a/target/linux/cobalt/Makefile b/target/linux/cobalt/Makefile index f2501d838b..b81ea9b85f 100644 --- a/target/linux/cobalt/Makefile +++ b/target/linux/cobalt/Makefile @@ -11,7 +11,7 @@ BOARD:=cobalt BOARDNAME:=Cobalt Microservers FEATURES:=tgz pci -LINUX_VERSION:=2.6.30-rc7 +LINUX_VERSION:=2.6.30-rc8 include $(INCLUDE_DIR)/target.mk diff --git a/target/linux/etrax/Makefile b/target/linux/etrax/Makefile index c6083537a5..b90a45cae5 100644 --- a/target/linux/etrax/Makefile +++ b/target/linux/etrax/Makefile @@ -10,7 +10,7 @@ ARCH:=cris BOARD:=etrax BOARDNAME:=Foxboard (ETRAX 100LX) FEATURES:=squashfs jffs2 -LINUX_VERSION:=2.6.30-rc7 +LINUX_VERSION:=2.6.30-rc8 DEVICE_TYPE= include $(INCLUDE_DIR)/target.mk diff --git a/target/linux/gemini/Makefile b/target/linux/gemini/Makefile index ffa7cd1354..14a4faef34 100644 --- a/target/linux/gemini/Makefile +++ b/target/linux/gemini/Makefile @@ -12,7 +12,7 @@ BOARDNAME:=Cortina Systems CS351x FEATURES:=squashfs CFLAGS:=-Os -pipe -march=armv4 -mtune=arm9tdmi -funit-at-a-time -LINUX_VERSION:=2.6.30-rc7 +LINUX_VERSION:=2.6.30-rc8 include $(INCLUDE_DIR)/target.mk diff --git a/target/linux/gemini/patches/001-git_sync.patch b/target/linux/gemini/patches/001-git_sync.patch index d36c5a277e..c408b6f588 100644 --- a/target/linux/gemini/patches/001-git_sync.patch +++ b/target/linux/gemini/patches/001-git_sync.patch @@ -189,8 +189,8 @@ .globl __kuser_helper_start __kuser_helper_start: -@@ -821,7 +822,7 @@ __kuser_memory_barrier: @ 0xffff0fa0 - #endif +@@ -818,7 +819,7 @@ __kuser_memory_barrier: @ 0xffff0fa0 + smp_dmb usr_ret lr - .align 5 @@ -198,7 +198,7 @@ /* * Reference prototype: -@@ -953,7 +954,7 @@ kuser_cmpxchg_fixup: +@@ -950,7 +951,7 @@ kuser_cmpxchg_fixup: #endif @@ -207,7 +207,7 @@ /* * Reference prototype: -@@ -1035,7 +1036,7 @@ __kuser_helper_end: +@@ -1032,7 +1033,7 @@ __kuser_helper_end: * of which is copied into r0 for the mode specific abort handler. */ .macro vector_stub, name, mode, correction=0 @@ -216,7 +216,7 @@ vector_\name: .if \correction -@@ -1160,7 +1161,7 @@ __stubs_start: +@@ -1157,7 +1158,7 @@ __stubs_start: .long __und_invalid @ e .long __und_invalid @ f @@ -225,7 +225,7 @@ /*============================================================================= * Undefined FIQs -@@ -1190,7 +1191,7 @@ vector_addrexcptn: +@@ -1187,7 +1188,7 @@ vector_addrexcptn: * We group all the following data together to optimise * for CPUs with separate I & D caches. */ @@ -850,7 +850,7 @@ +#endif /* __MACH_GMAC_H__ */ --- a/arch/arm/mach-gemini/include/mach/hardware.h +++ b/arch/arm/mach-gemini/include/mach/hardware.h -@@ -72,4 +72,12 @@ +@@ -71,4 +71,12 @@ */ #define IO_ADDRESS(x) ((((x) & 0xFFF00000) >> 4) | ((x) & 0x000FFFFF) | 0xF0000000) diff --git a/target/linux/generic-2.6/patches-2.6.30/208-rtl8110sb_fix.patch b/target/linux/generic-2.6/patches-2.6.30/208-rtl8110sb_fix.patch deleted file mode 100644 index 7f46c0b51a..0000000000 --- a/target/linux/generic-2.6/patches-2.6.30/208-rtl8110sb_fix.patch +++ /dev/null @@ -1,42 +0,0 @@ ---- a/drivers/net/r8169.c -+++ b/drivers/net/r8169.c -@@ -1890,7 +1890,7 @@ static const struct rtl_cfg_info { - .hw_start = rtl_hw_start_8169, - .region = 1, - .align = 0, -- .intr_event = SYSErr | LinkChg | RxOverflow | -+ .intr_event = LinkChg | RxOverflow | - RxFIFOOver | TxErr | TxOK | RxOK | RxErr, - .napi_event = RxFIFOOver | TxErr | TxOK | RxOK | RxOverflow, - .features = RTL_FEATURE_GMII -@@ -1899,7 +1899,7 @@ static const struct rtl_cfg_info { - .hw_start = rtl_hw_start_8168, - .region = 2, - .align = 8, -- .intr_event = SYSErr | LinkChg | RxOverflow | -+ .intr_event = LinkChg | RxOverflow | - TxErr | TxOK | RxOK | RxErr, - .napi_event = TxErr | TxOK | RxOK | RxOverflow, - .features = RTL_FEATURE_GMII | RTL_FEATURE_MSI -@@ -1908,7 +1908,7 @@ static const struct rtl_cfg_info { - .hw_start = rtl_hw_start_8101, - .region = 2, - .align = 8, -- .intr_event = SYSErr | LinkChg | RxOverflow | PCSTimeout | -+ .intr_event = LinkChg | RxOverflow | PCSTimeout | - RxFIFOOver | TxErr | TxOK | RxOK | RxErr, - .napi_event = RxFIFOOver | TxErr | TxOK | RxOK | RxOverflow, - .features = RTL_FEATURE_MSI -@@ -3582,10 +3582,12 @@ static irqreturn_t rtl8169_interrupt(int - goto out; - } - -+#if 0 - if (unlikely(status & SYSErr)) { - rtl8169_pcierr_interrupt(dev); - goto out; - } -+#endif - - if (status & LinkChg) - rtl8169_check_link_status(dev, tp, ioaddr); diff --git a/target/linux/generic-2.6/patches-2.6.30/680-phy_ar8216.patch b/target/linux/generic-2.6/patches-2.6.30/680-phy_ar8216.patch index 6cb3fd4170..d9d3ce7721 100644 --- a/target/linux/generic-2.6/patches-2.6.30/680-phy_ar8216.patch +++ b/target/linux/generic-2.6/patches-2.6.30/680-phy_ar8216.patch @@ -1,8 +1,8 @@ --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig -@@ -96,6 +96,10 @@ config ADM6996_PHY - config MVSWITCH_PHY - tristate "Driver for Marvell 88E6060 switches" +@@ -100,6 +100,10 @@ config IP175C_PHY + tristate "Driver for IC+ IP175C/IP178C switches" + select SWCONFIG +config AR8216_PHY + tristate "Driver for Atheros AR8216 switches" @@ -13,9 +13,9 @@ depends on PHYLIB=y --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile -@@ -16,6 +16,7 @@ obj-$(CONFIG_ICPLUS_PHY) += icplus.o - obj-$(CONFIG_ADM6996_PHY) += adm6996.o +@@ -17,6 +17,7 @@ obj-$(CONFIG_ADM6996_PHY) += adm6996.o obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o + obj-$(CONFIG_IP175C_PHY) += ip175c.o obj-$(CONFIG_REALTEK_PHY) += realtek.o +obj-$(CONFIG_AR8216_PHY) += ar8216.o obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o diff --git a/target/linux/generic-2.6/patches-2.6.30/801-usb_serial_endpoint_size.patch b/target/linux/generic-2.6/patches-2.6.30/801-usb_serial_endpoint_size.patch index 61730540fb..01fa4310b2 100644 --- a/target/linux/generic-2.6/patches-2.6.30/801-usb_serial_endpoint_size.patch +++ b/target/linux/generic-2.6/patches-2.6.30/801-usb_serial_endpoint_size.patch @@ -17,7 +17,7 @@ port->bulk_in_size = buffer_size; port->bulk_in_endpointAddress = endpoint->bEndpointAddress; port->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL); -@@ -1311,3 +1312,5 @@ MODULE_LICENSE("GPL"); +@@ -1312,3 +1313,5 @@ MODULE_LICENSE("GPL"); module_param(debug, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/target/linux/generic-2.6/patches-2.6.30/840-unable_to_open_console.patch b/target/linux/generic-2.6/patches-2.6.30/840-unable_to_open_console.patch index c9a2774689..eb6bd8c2b7 100644 --- a/target/linux/generic-2.6/patches-2.6.30/840-unable_to_open_console.patch +++ b/target/linux/generic-2.6/patches-2.6.30/840-unable_to_open_console.patch @@ -1,6 +1,6 @@ --- a/init/main.c +++ b/init/main.c -@@ -812,7 +812,7 @@ static noinline int init_post(void) +@@ -811,7 +811,7 @@ static noinline int init_post(void) numa_default_policy(); if (sys_open((const char __user *) "/dev/console", O_RDWR, 0) < 0) diff --git a/target/linux/generic-2.6/patches-2.6.30/922-gpiommc.patch b/target/linux/generic-2.6/patches-2.6.30/922-gpiommc.patch index 467187c108..ad35996a9c 100644 --- a/target/linux/generic-2.6/patches-2.6.30/922-gpiommc.patch +++ b/target/linux/generic-2.6/patches-2.6.30/922-gpiommc.patch @@ -824,7 +824,7 @@ +be done automatically. --- a/MAINTAINERS +++ b/MAINTAINERS -@@ -2495,6 +2495,11 @@ T: git git://git.kernel.org/pub/scm/linu +@@ -2504,6 +2504,11 @@ T: git git://git.kernel.org/pub/scm/linu S: Maintained F: drivers/media/video/gspca/ diff --git a/target/linux/generic-2.6/patches-2.6.30/991-mv643xx_eth_coherent_dma_mask.patch b/target/linux/generic-2.6/patches-2.6.30/991-mv643xx_eth_coherent_dma_mask.patch deleted file mode 100644 index 1a8012f083..0000000000 --- a/target/linux/generic-2.6/patches-2.6.30/991-mv643xx_eth_coherent_dma_mask.patch +++ /dev/null @@ -1,112 +0,0 @@ -From: Nicolas Pitre -Date: Fri, 22 May 2009 20:53:40 +0000 (-0400) -Subject: [ARM] add coherent DMA mask for mv643xx_eth -X-Git-Url: http://git.marvell.com/?p=orion.git;a=commitdiff_plain;h=a49a018a6ea6d73742a81d673fe5ec4a7d2137b3 - -[ARM] add coherent DMA mask for mv643xx_eth - -Since commit eb0519b5a1cf, mv643xx_eth is non functional on ARM because -the platform device declaration does not include any coherent DMA mask -and coherent memory allocations fail. - -Signed-off-by: Nicolas Pitre ---- - ---- a/arch/arm/mach-kirkwood/common.c -+++ b/arch/arm/mach-kirkwood/common.c -@@ -144,6 +144,9 @@ static struct platform_device kirkwood_g - .id = 0, - .num_resources = 1, - .resource = kirkwood_ge00_resources, -+ .dev = { -+ .coherent_dma_mask = 0xffffffff, -+ }, - }; - - void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data) -@@ -202,6 +205,9 @@ static struct platform_device kirkwood_g - .id = 1, - .num_resources = 1, - .resource = kirkwood_ge01_resources, -+ .dev = { -+ .coherent_dma_mask = 0xffffffff, -+ }, - }; - - void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data) ---- a/arch/arm/mach-loki/common.c -+++ b/arch/arm/mach-loki/common.c -@@ -82,6 +82,9 @@ static struct platform_device loki_ge0 = - .id = 0, - .num_resources = 1, - .resource = loki_ge0_resources, -+ .dev = { -+ .coherent_dma_mask = 0xffffffff, -+ }, - }; - - void __init loki_ge0_init(struct mv643xx_eth_platform_data *eth_data) -@@ -136,6 +139,9 @@ static struct platform_device loki_ge1 = - .id = 1, - .num_resources = 1, - .resource = loki_ge1_resources, -+ .dev = { -+ .coherent_dma_mask = 0xffffffff, -+ }, - }; - - void __init loki_ge1_init(struct mv643xx_eth_platform_data *eth_data) ---- a/arch/arm/mach-mv78xx0/common.c -+++ b/arch/arm/mach-mv78xx0/common.c -@@ -321,6 +321,9 @@ static struct platform_device mv78xx0_ge - .id = 0, - .num_resources = 1, - .resource = mv78xx0_ge00_resources, -+ .dev = { -+ .coherent_dma_mask = 0xffffffff, -+ }, - }; - - void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data) -@@ -375,6 +378,9 @@ static struct platform_device mv78xx0_ge - .id = 1, - .num_resources = 1, - .resource = mv78xx0_ge01_resources, -+ .dev = { -+ .coherent_dma_mask = 0xffffffff, -+ }, - }; - - void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data) -@@ -429,6 +435,9 @@ static struct platform_device mv78xx0_ge - .id = 2, - .num_resources = 1, - .resource = mv78xx0_ge10_resources, -+ .dev = { -+ .coherent_dma_mask = 0xffffffff, -+ }, - }; - - void __init mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data) -@@ -496,6 +505,9 @@ static struct platform_device mv78xx0_ge - .id = 3, - .num_resources = 1, - .resource = mv78xx0_ge11_resources, -+ .dev = { -+ .coherent_dma_mask = 0xffffffff, -+ }, - }; - - void __init mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data) ---- a/arch/arm/mach-orion5x/common.c -+++ b/arch/arm/mach-orion5x/common.c -@@ -188,6 +188,9 @@ static struct platform_device orion5x_et - .id = 0, - .num_resources = 1, - .resource = orion5x_eth_resources, -+ .dev = { -+ .coherent_dma_mask = 0xffffffff, -+ }, - }; - - void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data) diff --git a/target/linux/generic-2.6/patches-2.6.30/999-use_preinit_as_init.patch b/target/linux/generic-2.6/patches-2.6.30/999-use_preinit_as_init.patch index 0a52a87e83..631da6d768 100644 --- a/target/linux/generic-2.6/patches-2.6.30/999-use_preinit_as_init.patch +++ b/target/linux/generic-2.6/patches-2.6.30/999-use_preinit_as_init.patch @@ -1,6 +1,6 @@ --- a/init/main.c +++ b/init/main.c -@@ -836,10 +836,7 @@ static noinline int init_post(void) +@@ -835,10 +835,7 @@ static noinline int init_post(void) printk(KERN_WARNING "Failed to execute %s. Attempting " "defaults...\n", execute_command); } diff --git a/target/linux/kirkwood/Makefile b/target/linux/kirkwood/Makefile index c5004f7557..1e91b6ffde 100644 --- a/target/linux/kirkwood/Makefile +++ b/target/linux/kirkwood/Makefile @@ -11,7 +11,7 @@ BOARD:=kirkwood BOARDNAME:=Marvell Kirkwood FEATURES:=tgz usb -LINUX_VERSION:=2.6.30-rc7 +LINUX_VERSION:=2.6.30-rc8 include $(INCLUDE_DIR)/target.mk diff --git a/target/linux/kirkwood/patches/003-gating.patch b/target/linux/kirkwood/patches/003-gating.patch index af8e911e0d..c858d01a9a 100644 --- a/target/linux/kirkwood/patches/003-gating.patch +++ b/target/linux/kirkwood/patches/003-gating.patch @@ -16,7 +16,7 @@ Signed-off-by: Rabeeh Khoury --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c -@@ -788,6 +788,38 @@ static void __init kirkwood_l2_init(void +@@ -786,6 +786,38 @@ static void __init kirkwood_l2_init(void #endif } diff --git a/target/linux/octeon/Makefile b/target/linux/octeon/Makefile index 3cf814866c..4f344a3827 100644 --- a/target/linux/octeon/Makefile +++ b/target/linux/octeon/Makefile @@ -12,7 +12,7 @@ BOARDNAME:=Cavium Networks Octeon FEATURES:=squashfs jffs2 pci CFLAGS:=-Os -pipe -funit-at-a-time -LINUX_VERSION:=2.6.30-rc7 +LINUX_VERSION:=2.6.30-rc8 include $(INCLUDE_DIR)/target.mk diff --git a/target/linux/octeon/patches/001-handle_removal_h_constraint.patch b/target/linux/octeon/patches/001-handle_removal_h_constraint.patch index b37b4a7577..48c41d74d5 100644 --- a/target/linux/octeon/patches/001-handle_removal_h_constraint.patch +++ b/target/linux/octeon/patches/001-handle_removal_h_constraint.patch @@ -12,8 +12,8 @@ Signed-off-by: David Daney --- a/arch/mips/include/asm/compiler.h +++ b/arch/mips/include/asm/compiler.h -@@ -16,4 +16,11 @@ - #define GCC_REG_ACCUM "accum" +@@ -26,4 +26,11 @@ typedef u64 uintx_t; + #endif #endif +#if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 4) @@ -26,7 +26,7 @@ Signed-off-by: David Daney #endif /* _ASM_COMPILER_H */ --- a/arch/mips/include/asm/delay.h +++ b/arch/mips/include/asm/delay.h -@@ -83,10 +83,14 @@ static inline void __udelay(unsigned lon +@@ -67,10 +67,14 @@ static inline unsigned long __usecs_to_l : "r" (usecs), "r" (lpj) : GCC_REG_ACCUM); else if (sizeof(long) == 8 && !R4000_WAR) diff --git a/target/linux/rb532/Makefile b/target/linux/rb532/Makefile index 8f036cc991..f04a4e684b 100644 --- a/target/linux/rb532/Makefile +++ b/target/linux/rb532/Makefile @@ -11,7 +11,7 @@ BOARD:=rb532 BOARDNAME:=Mikrotik RouterBoard 532 FEATURES:=jffs2 pci tgz -LINUX_VERSION:=2.6.30-rc7 +LINUX_VERSION:=2.6.30-rc8 include $(INCLUDE_DIR)/target.mk DEFAULT_PACKAGES += hostapd-mini kmod-madwifi diff --git a/target/linux/s3c24xx/Makefile b/target/linux/s3c24xx/Makefile index b2a29e79ec..477fd9b00b 100644 --- a/target/linux/s3c24xx/Makefile +++ b/target/linux/s3c24xx/Makefile @@ -12,7 +12,7 @@ BOARDNAME:=Samsung S3C24xx FEATURES:=jffs2 CFLAGS:=-O2 -pipe -march=armv4t -mtune=arm920t -funit-at-a-time -LINUX_VERSION:=2.6.30-rc7 +LINUX_VERSION:=2.6.30-rc8 DEVICE_TYPE=phone diff --git a/target/linux/s3c24xx/patches-2.6.30/030-dont-override-logo-with-early-printks.patch b/target/linux/s3c24xx/patches-2.6.30/030-dont-override-logo-with-early-printks.patch index 3aa1a0be5a..305af188ac 100644 --- a/target/linux/s3c24xx/patches-2.6.30/030-dont-override-logo-with-early-printks.patch +++ b/target/linux/s3c24xx/patches-2.6.30/030-dont-override-logo-with-early-printks.patch @@ -1,7 +1,6 @@ -diff -ruN linux-2.6.29.orig/drivers/video/console/fbcon.c linux-2.6.29/drivers/video/console/fbcon.c ---- linux-2.6.29.orig/drivers/video/console/fbcon.c 2009-05-14 22:21:12.000000000 +0200 -+++ linux-2.6.29/drivers/video/console/fbcon.c 2009-05-15 01:45:36.000000000 +0200 -@@ -562,7 +562,7 @@ +--- a/drivers/video/console/fbcon.c ++++ b/drivers/video/console/fbcon.c +@@ -562,7 +562,7 @@ static void fbcon_prepare_logo(struct vc /* Need to make room for the logo */ struct fbcon_ops *ops = info->fbcon_par; int cnt, erase = vc->vc_video_erase_char, step; @@ -10,7 +9,7 @@ diff -ruN linux-2.6.29.orig/drivers/video/console/fbcon.c linux-2.6.29/drivers/v int logo_height; if (info->flags & FBINFO_MODULE) { -@@ -581,37 +581,18 @@ +@@ -581,37 +581,18 @@ static void fbcon_prepare_logo(struct vc q = (unsigned short *) (vc->vc_origin + vc->vc_size_row * rows); step = logo_lines * cols; @@ -60,7 +59,7 @@ diff -ruN linux-2.6.29.orig/drivers/video/console/fbcon.c linux-2.6.29/drivers/v scr_memsetw((unsigned short *) vc->vc_origin, erase, vc->vc_size_row * logo_lines); -@@ -621,16 +602,6 @@ +@@ -621,16 +602,6 @@ static void fbcon_prepare_logo(struct vc update_screen(vc); } diff --git a/target/linux/s3c24xx/patches-2.6.30/031-add-openwrt-logo.patch b/target/linux/s3c24xx/patches-2.6.30/031-add-openwrt-logo.patch index 87f62fd238..3e1a59c847 100644 --- a/target/linux/s3c24xx/patches-2.6.30/031-add-openwrt-logo.patch +++ b/target/linux/s3c24xx/patches-2.6.30/031-add-openwrt-logo.patch @@ -1,7 +1,6 @@ -diff -ruN linux-2.6.29.orig/drivers/video/logo/Kconfig linux-2.6.29/drivers/video/logo/Kconfig ---- linux-2.6.29.orig/drivers/video/logo/Kconfig 2009-05-14 22:21:12.000000000 +0200 -+++ linux-2.6.29/drivers/video/logo/Kconfig 2009-05-14 22:28:50.000000000 +0200 -@@ -82,4 +82,8 @@ +--- a/drivers/video/logo/Kconfig ++++ b/drivers/video/logo/Kconfig +@@ -82,4 +82,8 @@ config LOGO_M32R_CLUT224 depends on M32R default y @@ -10,10 +9,9 @@ diff -ruN linux-2.6.29.orig/drivers/video/logo/Kconfig linux-2.6.29/drivers/vide + default y + endif # LOGO -diff -ruN linux-2.6.29.orig/drivers/video/logo/logo.c linux-2.6.29/drivers/video/logo/logo.c ---- linux-2.6.29.orig/drivers/video/logo/logo.c 2009-05-14 22:21:12.000000000 +0200 -+++ linux-2.6.29/drivers/video/logo/logo.c 2009-05-14 22:37:05.000000000 +0200 -@@ -35,6 +35,7 @@ +--- a/drivers/video/logo/logo.c ++++ b/drivers/video/logo/logo.c +@@ -35,6 +35,7 @@ extern const struct linux_logo logo_supe extern const struct linux_logo logo_superh_vga16; extern const struct linux_logo logo_superh_clut224; extern const struct linux_logo logo_m32r_clut224; @@ -21,7 +19,7 @@ diff -ruN linux-2.6.29.orig/drivers/video/logo/logo.c linux-2.6.29/drivers/video static int nologo; module_param(nologo, bool, 0); -@@ -115,6 +116,10 @@ +@@ -115,6 +116,10 @@ const struct linux_logo * __init_refok f /* M32R Linux logo */ logo = &logo_m32r_clut224; #endif @@ -32,9 +30,8 @@ diff -ruN linux-2.6.29.orig/drivers/video/logo/logo.c linux-2.6.29/drivers/video } return logo; } -diff -ruN linux-2.6.29.orig/drivers/video/logo/logo_openwrt_clut224.ppm linux-2.6.29/drivers/video/logo/logo_openwrt_clut224.ppm ---- linux-2.6.29.orig/drivers/video/logo/logo_openwrt_clut224.ppm 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.29/drivers/video/logo/logo_openwrt_clut224.ppm 2009-05-15 09:54:13.000000000 +0200 +--- /dev/null ++++ b/drivers/video/logo/logo_openwrt_clut224.ppm @@ -0,0 +1,38403 @@ +P3 +480 480 @@ -38439,10 +38436,9 @@ diff -ruN linux-2.6.29.orig/drivers/video/logo/logo_openwrt_clut224.ppm linux-2. +0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 +0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 +0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -diff -ruN linux-2.6.29.orig/drivers/video/logo/Makefile linux-2.6.29/drivers/video/logo/Makefile ---- linux-2.6.29.orig/drivers/video/logo/Makefile 2009-05-14 22:21:12.000000000 +0200 -+++ linux-2.6.29/drivers/video/logo/Makefile 2009-05-14 22:35:42.000000000 +0200 -@@ -15,6 +15,7 @@ +--- a/drivers/video/logo/Makefile ++++ b/drivers/video/logo/Makefile +@@ -15,6 +15,7 @@ obj-$(CONFIG_LOGO_SUPERH_MONO) += logo_ obj-$(CONFIG_LOGO_SUPERH_VGA16) += logo_superh_vga16.o obj-$(CONFIG_LOGO_SUPERH_CLUT224) += logo_superh_clut224.o obj-$(CONFIG_LOGO_M32R_CLUT224) += logo_m32r_clut224.o diff --git a/target/linux/s3c24xx/patches-2.6.30/040-rename-serialdevs.patch b/target/linux/s3c24xx/patches-2.6.30/040-rename-serialdevs.patch index 3e6fdbea92..4176dbc87f 100644 --- a/target/linux/s3c24xx/patches-2.6.30/040-rename-serialdevs.patch +++ b/target/linux/s3c24xx/patches-2.6.30/040-rename-serialdevs.patch @@ -1,6 +1,6 @@ --- a/drivers/serial/samsung.c +++ b/drivers/serial/samsung.c -@@ -882,7 +882,7 @@ static struct uart_ops s3c24xx_serial_op +@@ -878,7 +878,7 @@ static struct uart_ops s3c24xx_serial_op static struct uart_driver s3c24xx_uart_drv = { .owner = THIS_MODULE, diff --git a/target/linux/sibyte/Makefile b/target/linux/sibyte/Makefile index f156c4d437..65e83ecdfd 100644 --- a/target/linux/sibyte/Makefile +++ b/target/linux/sibyte/Makefile @@ -12,7 +12,7 @@ BOARDNAME:=Broadcom/SiByte SB-1 FEATURES:=fpu CFLAGS:=-Os -pipe -march=sb1 -funit-at-a-time -LINUX_VERSION:=2.6.30-rc7 +LINUX_VERSION:=2.6.30-rc8 include $(INCLUDE_DIR)/target.mk