ar71xx: D-Link DIR-825 B1 eth1 MAC address is garbage

r22700 contained a copy-and-paste error that set eth0's MAC address
twice and never set eth1's.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24036 3c298f89-4303-0410-b956-a3cf2f4a3e73
master
Gabor Juhos 2010-11-19 07:24:00 +00:00
parent 77b7fb441c
commit 08b2d2d413
1 changed files with 1 additions and 1 deletions

View File

@ -156,7 +156,7 @@ static void __init dir825b1_setup(void)
ar71xx_eth0_data.duplex = DUPLEX_FULL; ar71xx_eth0_data.duplex = DUPLEX_FULL;
ar71xx_eth0_pll_data.pll_1000 = 0x11110000; ar71xx_eth0_pll_data.pll_1000 = 0x11110000;
ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 2); ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 2);
ar71xx_eth1_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev; ar71xx_eth1_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev;
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ar71xx_eth1_data.phy_mask = 0x10; ar71xx_eth1_data.phy_mask = 0x10;