wifipineapple-openwrt/target/linux/ipq806x/patches/0094-ARM-dts-qcom-Add-initial-APQ8064-SoC-and-IFC6410-boa.patch

From 07d7d95706c1bf373bd6b30c42f95c7b8dc8b9ce Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@codeaurora.org>
Date: Thu, 3 Apr 2014 14:48:22 -0500
Subject: [PATCH 094/182] ARM: dts: qcom: Add initial APQ8064 SoC and IFC6410
 board device trees

Add basic APQ8064 SoC include device tree and support for basic booting on
the IFC6410 board.  Also, keep dtb build list and qcom_dt_match in sorted
order.

Signed-off-by: Kumar Gala <galak@codeaurora.org>
---
 arch/arm/boot/dts/Makefile                 |    8 +-
 arch/arm/boot/dts/qcom-apq8064-ifc6410.dts |   16 +++
 arch/arm/boot/dts/qcom-apq8064-v2.0.dtsi   |    1 +
 arch/arm/boot/dts/qcom-apq8064.dtsi        |  170 ++++++++++++++++++++++++++++
 arch/arm/mach-qcom/board.c                 |    3 +-
 5 files changed, 194 insertions(+), 4 deletions(-)
 create mode 100644 arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
 create mode 100644 arch/arm/boot/dts/qcom-apq8064-v2.0.dtsi
 create mode 100644 arch/arm/boot/dts/qcom-apq8064.dtsi

--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -231,9 +231,11 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420
 	dra7-evm.dtb
 dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb
 dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
-dtb-$(CONFIG_ARCH_QCOM) += qcom-msm8660-surf.dtb \
-	qcom-msm8960-cdp.dtb \
-	qcom-apq8074-dragonboard.dtb
+dtb-$(CONFIG_ARCH_QCOM) += \
+	qcom-apq8064-ifc6410.dtb \
+	qcom-apq8074-dragonboard.dtb \
+	qcom-msm8660-surf.dtb \
+	qcom-msm8960-cdp.dtb
 dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \
 	ste-hrefprev60-stuib.dtb \
 	ste-hrefprev60-tvk.dtb \
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -0,0 +1,16 @@
+#include "qcom-apq8064-v2.0.dtsi"
+
+/ {
+	model = "Qualcomm APQ8064/IFC6410";
+	compatible = "qcom,apq8064-ifc6410", "qcom,apq8064";
+
+	soc {
+		gsbi@16600000 {
+			status = "ok";
+			qcom,mode = <GSBI_PROT_I2C_UART>;
+			serial@16640000 {
+				status = "ok";
+			};
+		};
+	};
+};
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8064-v2.0.dtsi
@@ -0,0 +1 @@
+#include "qcom-apq8064.dtsi"
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -0,0 +1,170 @@
+/dts-v1/;
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/qcom,gcc-msm8960.h>
+#include <dt-bindings/soc/qcom,gsbi.h>
+
+/ {
+	model = "Qualcomm APQ8064";
+	compatible = "qcom,apq8064";
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v1";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc0>;
+			qcom,saw = <&saw0>;
+		};
+
+		cpu@1 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v1";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc1>;
+			qcom,saw = <&saw1>;
+		};
+
+		cpu@2 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v1";
+			device_type = "cpu";
+			reg = <2>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc2>;
+			qcom,saw = <&saw2>;
+		};
+
+		cpu@3 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v1";
+			device_type = "cpu";
+			reg = <3>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc3>;
+			qcom,saw = <&saw3>;
+		};
+
+		L2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+		};
+	};
+
+	cpu-pmu {
+		compatible = "qcom,krait-pmu";
+		interrupts = <1 10 0x304>;
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		intc: interrupt-controller@2000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x02000000 0x1000>,
+			      <0x02002000 0x1000>;
+		};
+
+		timer@200a000 {
+			compatible = "qcom,kpss-timer", "qcom,msm-timer";
+			interrupts = <1 1 0x301>,
+				     <1 2 0x301>,
+				     <1 3 0x301>;
+			reg = <0x0200a000 0x100>;
+			clock-frequency = <27000000>,
+					  <32768>;
+			cpu-offset = <0x80000>;
+		};
+
+		acc0: clock-controller@2088000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
+		};
+
+		acc1: clock-controller@2098000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
+		};
+
+		acc2: clock-controller@20a8000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x020a8000 0x1000>, <0x02008000 0x1000>;
+		};
+
+		acc3: clock-controller@20b8000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x020b8000 0x1000>, <0x02008000 0x1000>;
+		};
+
+		saw0: regulator@2089000 {
+			compatible = "qcom,saw2";
+			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
+			regulator;
+		};
+
+		saw1: regulator@2099000 {
+			compatible = "qcom,saw2";
+			reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
+			regulator;
+		};
+
+		saw2: regulator@20a9000 {
+			compatible = "qcom,saw2";
+			reg = <0x020a9000 0x1000>, <0x02009000 0x1000>;
+			regulator;
+		};
+
+		saw3: regulator@20b9000 {
+			compatible = "qcom,saw2";
+			reg = <0x020b9000 0x1000>, <0x02009000 0x1000>;
+			regulator;
+		};
+
+		gsbi7: gsbi@16600000 {
+			status = "disabled";
+			compatible = "qcom,gsbi-v1.0.0";
+			reg = <0x16600000 0x100>;
+			clocks = <&gcc GSBI7_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			serial@16640000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x16640000 0x1000>,
+				      <0x16600000 0x1000>;
+				interrupts = <0 158 0x0>;
+				clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
+		qcom,ssbi@500000 {
+			compatible = "qcom,ssbi";
+			reg = <0x00500000 0x1000>;
+			qcom,controller-type = "pmic-arbiter";
+		};
+
+		gcc: clock-controller@900000 {
+			compatible = "qcom,gcc-apq8064";
+			reg = <0x00900000 0x4000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+	};
+};
--- a/arch/arm/mach-qcom/board.c
+++ b/arch/arm/mach-qcom/board.c
@@ -15,9 +15,10 @@
 #include <asm/mach/arch.h>
 
 static const char * const qcom_dt_match[] __initconst = {
+	"qcom,apq8064",
+	"qcom,apq8074-dragonboard",
 	"qcom,msm8660-surf",
 	"qcom,msm8960-cdp",
-	"qcom,apq8074-dragonboard",
 	NULL
 };