wifipineapple-openwrt/target/linux/x86/patches-2.6.30/300-block2mtd_init.patch

--- a/arch/x86/kernel/vmlinux_32.lds.S
+++ b/arch/x86/kernel/vmlinux_32.lds.S
@@ -136,6 +136,12 @@ SECTIONS
 	INITCALLS
   	__initcall_end = .;
   }
+  .root_initcall.init : AT(ADDR(.root_initcall.init) - LOAD_OFFSET) {
+    __root_initcall_start = .;
+    INITCALLS_ROOT
+    __root_initcall_end = .;
+  }
+   
   .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
   	__con_initcall_start = .;
 	*(.con_initcall.init)
--- a/drivers/mtd/devices/block2mtd.c
+++ b/drivers/mtd/devices/block2mtd.c
@@ -18,10 +18,18 @@
 #include <linux/buffer_head.h>
 #include <linux/mutex.h>
 #include <linux/mount.h>
+#include <linux/list.h>
+#include <linux/delay.h>
 
 #define ERROR(fmt, args...) printk(KERN_ERR "block2mtd: " fmt "\n" , ## args)
 #define INFO(fmt, args...) printk(KERN_INFO "block2mtd: " fmt "\n" , ## args)
 
+struct retry {
+    struct list_head list;
+    const char *val;
+};
+
+static LIST_HEAD(retry_list);
 
 /* Info for the block device */
 struct block2mtd_dev {
@@ -33,10 +41,34 @@ struct block2mtd_dev {
 	char devname[0];
 };
 
+static int block2mtd_setup2(const char *val);
 
 /* Static info about the MTD, used in cleanup_module */
 static LIST_HEAD(blkmtd_device_list);
 
+static int add_retry(const char *val) {
+    struct retry *r = kmalloc(sizeof(struct retry), GFP_KERNEL);
+
+    INIT_LIST_HEAD(&r->list);
+    r->val = val;
+    list_add(&r->list, &retry_list);
+
+    return 0;
+}
+
+static int __init process_retries(void) {
+    struct list_head *p, *tmp;
+
+    list_for_each_safe(p, tmp, &retry_list) {
+        struct retry *r = list_entry(p, struct retry, list);
+        block2mtd_setup2(r->val);
+        msleep(100);
+        list_del(p);
+        kfree(r);
+    }
+    return 0;
+}
+rootfs_initcall(process_retries);
 
 static struct page *page_read(struct address_space *mapping, int index)
 {
@@ -511,7 +543,9 @@ static int block2mtd_setup2(const char *
 	if (token[2] && (strlen(token[2]) + 1 > 80))
 		parse_err("mtd device name too long");
 
-	add_device(name, erase_size, token[2]);
+	if (add_device(name, erase_size, token[2]) == NULL) {
+        add_retry(val);
+    }   
 
 	return 0;
 }
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -474,12 +474,14 @@
   	*(.initcall4s.init)						\
   	*(.initcall5.init)						\
   	*(.initcall5s.init)						\
-	*(.initcallrootfs.init)						\
   	*(.initcall6.init)						\
   	*(.initcall6s.init)						\
   	*(.initcall7.init)						\
   	*(.initcall7s.init)
 
+#define INITCALLS_ROOT							\
+	*(.initcallrootfs.init)
+
 /**
  * PERCPU_VADDR - define output section for percpu area
  * @vaddr: explicit base address (optional)
--- a/init/do_mounts.c
+++ b/init/do_mounts.c
@@ -176,16 +176,8 @@ static int __init fs_names_setup(char *s
 	return 1;
 }
 
-static unsigned int __initdata root_delay;
-static int __init root_delay_setup(char *str)
-{
-	root_delay = simple_strtoul(str, NULL, 0);
-	return 1;
-}
-
 __setup("rootflags=", root_data_setup);
 __setup("rootfstype=", fs_names_setup);
-__setup("rootdelay=", root_delay_setup);
 
 static void __init get_fs_names(char *page)
 {
@@ -365,23 +357,6 @@ void __init prepare_namespace(void)
 {
 	int is_floppy;
 
-	if (root_delay) {
-		printk(KERN_INFO "Waiting %dsec before mounting root device...\n",
-		       root_delay);
-		ssleep(root_delay);
-	}
-
-	/*
-	 * wait for the known devices to complete their probing
-	 *
-	 * Note: this is a potential source of long boot delays.
-	 * For example, it is not atypical to wait 5 seconds here
-	 * for the touchpad of a laptop to initialize.
-	 */
-	wait_for_device_probe();
-
-	md_run_setup();
-
 	if (saved_root_name[0]) {
 		root_device_name = saved_root_name;
 		if (!strncmp(root_device_name, "mtd", 3) ||
--- a/init/main.c
+++ b/init/main.c
@@ -76,6 +76,7 @@
 #ifdef CONFIG_X86_LOCAL_APIC
 #include <asm/smp.h>
 #endif
+#include "do_mounts.h"
 
 static int kernel_init(void *);
 
@@ -753,12 +754,13 @@ int do_one_initcall(initcall_t fn)
 
 
 extern initcall_t __initcall_start[], __initcall_end[], __early_initcall_end[];
+extern initcall_t __root_initcall_start[], __root_initcall_end[];
 
-static void __init do_initcalls(void)
+static void __init do_initcalls(initcall_t *start, initcall_t *end)
 {
 	initcall_t *call;
 
-	for (call = __early_initcall_end; call < __initcall_end; call++)
+	for (call = start; call < end; call++)
 		do_one_initcall(*call);
 
 	/* Make sure there is no pending stuff from the initcall sequence */
@@ -780,7 +782,7 @@ static void __init do_basic_setup(void)
 	usermodehelper_init();
 	driver_init();
 	init_irq_proc();
-	do_initcalls();
+	do_initcalls(__early_initcall_end, __initcall_end);
 }
 
 static void __init do_pre_smp_initcalls(void)
@@ -841,6 +843,13 @@ static noinline int init_post(void)
 	panic("No init found.  Try passing init= option to kernel.");
 }
 
+static unsigned int __initdata root_delay;
+static int __init root_delay_setup(char *str)
+{
+    root_delay = simple_strtoul(str, NULL, 0);
+    return 1;
+}
+__setup("rootdelay=", root_delay_setup);
 static int __init kernel_init(void * unused)
 {
 	lock_kernel();
@@ -880,7 +889,16 @@ static int __init kernel_init(void * unu
 
 	if (sys_access((const char __user *) ramdisk_execute_command, 0) != 0) {
 		ramdisk_execute_command = NULL;
-		prepare_namespace();
+		if (root_delay) {
+            printk(KERN_INFO "Waiting %desc before mounting root device...\n", 
+                root_delay);
+            ssleep(root_delay);
+        }
+        while (driver_probe_done() != 0)
+            msleep(100);
+        do_initcalls(__root_initcall_start, __root_initcall_end);
+        md_run_setup();
+        prepare_namespace();
 	}
 
 	/*