wifipineapple-openwrt/target/linux/sunxi/patches-3.14/284-ir-backports-from-3.15.patch

From 00942d1a1bd93ac108c1b92d504c568a37be1833 Mon Sep 17 00:00:00 2001
From: James Hogan <james.hogan@imgtec.com>
Date: Fri, 17 Jan 2014 10:58:49 -0300
Subject: [PATCH] [media] media: rc: add sysfs scancode filtering interface

Add and document a generic sysfs based scancode filtering interface for
making use of IR data matching hardware to filter out uninteresting
scancodes. Two filters exist, one for normal operation and one for
filtering scancodes which are permitted to wake the system from suspend.

The following files are added to /sys/class/rc/rc?/:
 - filter: normal scancode filter value
 - filter_mask: normal scancode filter mask
 - wakeup_filter: wakeup scancode filter value
 - wakeup_filter_mask: wakeup scancode filter mask

A new s_filter() driver callback is added which must arrange for the
specified filter to be applied at the right time. Drivers can convert
the scancode filter into a raw IR data filter, which can be applied
immediately or later (for wake up filters).

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Mauro Carvalho Chehab <m.chehab@samsung.com>
Cc: linux-media@vger.kernel.org
Cc: Rob Landley <rob@landley.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
---
 Documentation/ABI/testing/sysfs-class-rc |  58 +++++++++++++
 drivers/media/rc/rc-main.c               | 136 +++++++++++++++++++++++++++++++
 include/media/rc-core.h                  |  29 +++++++
 3 files changed, 223 insertions(+)

From 7b802ce7e8c67510389fdbbe29edd87a75df3a93 Mon Sep 17 00:00:00 2001
From: James Hogan <james.hogan@imgtec.com>
Date: Mon, 10 Feb 2014 18:31:56 -0300
Subject: [PATCH] [media] rc-main: store_filter: pass errors to userland
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Propagate errors returned by drivers from the s_filter callback back to
userland when updating scancode filters. This allows userland to see
when the filter couldn't be updated, usually because it's not a valid
filter for the hardware.

Previously the filter was being updated conditionally on success of
s_filter, but the write always reported success back to userland.

Reported-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
---
 drivers/media/rc/rc-main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

From b8c7d915087c97a21fa415fa0e860e59739da202 Mon Sep 17 00:00:00 2001
From: James Hogan <james.hogan@imgtec.com>
Date: Fri, 28 Feb 2014 20:17:02 -0300
Subject: [PATCH] [media] rc-main: add generic scancode filtering
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Add generic scancode filtering of RC input events, and fall back to
permitting any RC_FILTER_NORMAL scancode filter to be set if no s_filter
callback exists. This allows raw IR decoder events to be filtered, and
potentially allows hardware decoders to set looser filters and rely on
generic code to filter out the corner cases.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
---
 drivers/media/rc/rc-main.c | 20 +++++++++++++-------
 1 file changed, 13 insertions(+), 7 deletions(-)

From 1a1934fab0c920f0d3bceeb60c9fe2dae8a56be9 Mon Sep 17 00:00:00 2001
From: James Hogan <james.hogan@imgtec.com>
Date: Fri, 28 Feb 2014 20:17:03 -0300
Subject: [PATCH] [media] rc: abstract access to allowed/enabled protocols
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The allowed and enabled protocol masks need to be expanded to be per
filter type in order to support wakeup filter protocol selection. To
ease that process abstract access to the rc_dev::allowed_protos and
rc_dev::enabled_protocols members with inline functions.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
---
 drivers/hid/hid-picolcd_cir.c               |  2 +-
 drivers/media/common/siano/smsir.c          |  2 +-
 drivers/media/i2c/ir-kbd-i2c.c              |  4 ++--
 drivers/media/pci/cx23885/cx23885-input.c   |  2 +-
 drivers/media/pci/cx88/cx88-input.c         |  2 +-
 drivers/media/rc/ati_remote.c               |  2 +-
 drivers/media/rc/ene_ir.c                   |  2 +-
 drivers/media/rc/fintek-cir.c               |  2 +-
 drivers/media/rc/gpio-ir-recv.c             |  4 ++--
 drivers/media/rc/iguanair.c                 |  2 +-
 drivers/media/rc/imon.c                     |  7 ++++---
 drivers/media/rc/ir-jvc-decoder.c           |  2 +-
 drivers/media/rc/ir-lirc-codec.c            |  2 +-
 drivers/media/rc/ir-mce_kbd-decoder.c       |  2 +-
 drivers/media/rc/ir-nec-decoder.c           |  2 +-
 drivers/media/rc/ir-raw.c                   |  2 +-
 drivers/media/rc/ir-rc5-decoder.c           |  6 +++---
 drivers/media/rc/ir-rc5-sz-decoder.c        |  2 +-
 drivers/media/rc/ir-rc6-decoder.c           |  6 +++---
 drivers/media/rc/ir-sanyo-decoder.c         |  2 +-
 drivers/media/rc/ir-sharp-decoder.c         |  2 +-
 drivers/media/rc/ir-sony-decoder.c          | 10 +++++-----
 drivers/media/rc/ite-cir.c                  |  2 +-
 drivers/media/rc/mceusb.c                   |  2 +-
 drivers/media/rc/nuvoton-cir.c              |  2 +-
 drivers/media/rc/rc-loopback.c              |  2 +-
 drivers/media/rc/redrat3.c                  |  2 +-
 drivers/media/rc/st_rc.c                    |  2 +-
 drivers/media/rc/streamzap.c                |  2 +-
 drivers/media/rc/ttusbir.c                  |  2 +-
 drivers/media/rc/winbond-cir.c              |  2 +-
 drivers/media/usb/dvb-usb-v2/dvb_usb_core.c |  2 +-
 drivers/media/usb/dvb-usb/dvb-usb-remote.c  |  2 +-
 drivers/media/usb/em28xx/em28xx-input.c     |  8 ++++----
 drivers/media/usb/tm6000/tm6000-input.c     |  2 +-
 include/media/rc-core.h                     | 22 ++++++++++++++++++++++
 36 files changed, 73 insertions(+), 50 deletions(-)

From acff5f24732acc8a55d0a0f0ee1d19442267df63 Mon Sep 17 00:00:00 2001
From: James Hogan <james.hogan@imgtec.com>
Date: Fri, 28 Feb 2014 20:17:04 -0300
Subject: [PATCH] [media] rc: add allowed/enabled wakeup protocol masks
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Only a single allowed and enabled protocol mask currently exists in
struct rc_dev, however to support a separate wakeup filter protocol two
of each are needed, ideally as an array.

Therefore make both rc_dev::allowed_protos and rc_dev::enabled_protocols
arrays, update all users to reference the first element
(RC_FILTER_NORMAL), and add a couple more helper functions for drivers
to use for setting the allowed and enabled wakeup protocols.

We also rename allowed_protos to allowed_protocols while we're at it,
which is more consistent with enabled_protocols.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
---
 drivers/media/rc/rc-main.c | 10 +++++-----
 include/media/rc-core.h    | 32 ++++++++++++++++++++++++--------
 2 files changed, 29 insertions(+), 13 deletions(-)

From ab88c66deace78989aa71cb139284cf7fb227ba4 Mon Sep 17 00:00:00 2001
From: James Hogan <james.hogan@imgtec.com>
Date: Fri, 28 Feb 2014 20:17:05 -0300
Subject: [PATCH] [media] rc: add wakeup_protocols sysfs file
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Add a wakeup_protocols sysfs file which controls the new
rc_dev::enabled_protocols[RC_FILTER_WAKEUP], which is the mask of
protocols that are used for the wakeup filter.

A new RC driver callback change_wakeup_protocol() is called to change
the wakeup protocol mask.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
---
 Documentation/ABI/testing/sysfs-class-rc           | 23 +++++-
 .../DocBook/media/v4l/remote_controllers.xml       | 20 +++++-
 drivers/media/rc/rc-main.c                         | 82 +++++++++++++---------
 include/media/rc-core.h                            |  3 +
 4 files changed, 90 insertions(+), 38 deletions(-)

From 6bea25af147fcddcd8fd4557f4184c847c5c6ffd Mon Sep 17 00:00:00 2001
From: James Hogan <james.hogan@imgtec.com>
Date: Fri, 28 Feb 2014 20:17:06 -0300
Subject: [PATCH] [media] rc-main: automatically refresh filter on protocol
 change
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

When either of the normal or wakeup filter protocols are changed,
refresh the corresponding scancode filter, i.e. try and set the same
scancode filter with the new protocol. If that fails clear the filter
instead.

If no protocol was selected the filter is just cleared, and if no
s_filter callback exists the filter is left unmodified.

Similarly clear the filter mask when the filter is set if no protocol is
currently selected.

This simplifies driver code which no longer has to explicitly worry
about modifying the filter on a protocol change. This also allows the
change_wakeup_protocol callback to be omitted entirely if there is only
a single available wakeup protocol at a time, since selecting no
protocol will automatically clear the wakeup filter, disabling wakeup.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
---
 drivers/media/rc/rc-main.c | 41 +++++++++++++++++++++++++++++++++++++++--
 1 file changed, 39 insertions(+), 2 deletions(-)

From 262912335c823a2bbcc87003ee55d62cc27f4e48 Mon Sep 17 00:00:00 2001
From: James Hogan <james.hogan@imgtec.com>
Date: Sat, 1 Mar 2014 19:52:25 -0300
Subject: [PATCH] [media] rc-main: fix missing unlock if no devno left

While playing with make coccicheck I noticed this message:
drivers/media/rc/rc-main.c:1245:3-9: preceding lock on line 1238

It was introduced by commit 587d1b06e07b ([media] rc-core: reuse device
numbers) which returns -ENOMEM after a mutex_lock without first
unlocking it when there are no more device numbers left. The added code
doesn't depend on the device lock, so move it before the lock is taken.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
---
 drivers/media/rc/rc-main.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

--- a/drivers/hid/hid-picolcd_cir.c
+++ b/drivers/hid/hid-picolcd_cir.c
@@ -114,7 +114,7 @@ int picolcd_init_cir(struct picolcd_data
 
 	rdev->priv             = data;
 	rdev->driver_type      = RC_DRIVER_IR_RAW;
-	rdev->allowed_protos   = RC_BIT_ALL;
+	rc_set_allowed_protocols(rdev, RC_BIT_ALL);
 	rdev->open             = picolcd_cir_open;
 	rdev->close            = picolcd_cir_close;
 	rdev->input_name       = data->hdev->name;
--- a/drivers/media/common/siano/smsir.c
+++ b/drivers/media/common/siano/smsir.c
@@ -88,7 +88,7 @@ int sms_ir_init(struct smscore_device_t 
 
 	dev->priv = coredev;
 	dev->driver_type = RC_DRIVER_IR_RAW;
-	dev->allowed_protos = RC_BIT_ALL;
+	rc_set_allowed_protocols(dev, RC_BIT_ALL);
 	dev->map_name = sms_get_board(board_id)->rc_codes;
 	dev->driver_name = MODULE_NAME;
 
--- a/drivers/media/i2c/ir-kbd-i2c.c
+++ b/drivers/media/i2c/ir-kbd-i2c.c
@@ -431,8 +431,8 @@ static int ir_probe(struct i2c_client *c
 	 * Initialize the other fields of rc_dev
 	 */
 	rc->map_name       = ir->ir_codes;
-	rc->allowed_protos = rc_type;
-	rc->enabled_protocols = rc_type;
+	rc_set_allowed_protocols(rc, rc_type);
+	rc_set_enabled_protocols(rc, rc_type);
 	if (!rc->driver_name)
 		rc->driver_name = MODULE_NAME;
 
--- a/drivers/media/pci/cx23885/cx23885-input.c
+++ b/drivers/media/pci/cx23885/cx23885-input.c
@@ -346,7 +346,7 @@ int cx23885_input_init(struct cx23885_de
 	}
 	rc->dev.parent = &dev->pci->dev;
 	rc->driver_type = driver_type;
-	rc->allowed_protos = allowed_protos;
+	rc_set_allowed_protocols(rc, allowed_protos);
 	rc->priv = kernel_ir;
 	rc->open = cx23885_input_ir_open;
 	rc->close = cx23885_input_ir_close;
--- a/drivers/media/pci/cx88/cx88-input.c
+++ b/drivers/media/pci/cx88/cx88-input.c
@@ -469,7 +469,7 @@ int cx88_ir_init(struct cx88_core *core,
 		dev->timeout = 10 * 1000 * 1000; /* 10 ms */
 	} else {
 		dev->driver_type = RC_DRIVER_SCANCODE;
-		dev->allowed_protos = rc_type;
+		rc_set_allowed_protocols(dev, rc_type);
 	}
 
 	ir->core = core;
--- a/drivers/media/rc/ati_remote.c
+++ b/drivers/media/rc/ati_remote.c
@@ -784,7 +784,7 @@ static void ati_remote_rc_init(struct at
 
 	rdev->priv = ati_remote;
 	rdev->driver_type = RC_DRIVER_SCANCODE;
-	rdev->allowed_protos = RC_BIT_OTHER;
+	rc_set_allowed_protocols(rdev, RC_BIT_OTHER);
 	rdev->driver_name = "ati_remote";
 
 	rdev->open = ati_remote_rc_open;
--- a/drivers/media/rc/ene_ir.c
+++ b/drivers/media/rc/ene_ir.c
@@ -1059,7 +1059,7 @@ static int ene_probe(struct pnp_dev *pnp
 		learning_mode_force = false;
 
 	rdev->driver_type = RC_DRIVER_IR_RAW;
-	rdev->allowed_protos = RC_BIT_ALL;
+	rc_set_allowed_protocols(rdev, RC_BIT_ALL);
 	rdev->priv = dev;
 	rdev->open = ene_open;
 	rdev->close = ene_close;
--- a/drivers/media/rc/fintek-cir.c
+++ b/drivers/media/rc/fintek-cir.c
@@ -541,7 +541,7 @@ static int fintek_probe(struct pnp_dev *
 	/* Set up the rc device */
 	rdev->priv = fintek;
 	rdev->driver_type = RC_DRIVER_IR_RAW;
-	rdev->allowed_protos = RC_BIT_ALL;
+	rc_set_allowed_protocols(rdev, RC_BIT_ALL);
 	rdev->open = fintek_open;
 	rdev->close = fintek_close;
 	rdev->input_name = FINTEK_DESCRIPTION;
--- a/drivers/media/rc/gpio-ir-recv.c
+++ b/drivers/media/rc/gpio-ir-recv.c
@@ -145,9 +145,9 @@ static int gpio_ir_recv_probe(struct pla
 	rcdev->dev.parent = &pdev->dev;
 	rcdev->driver_name = GPIO_IR_DRIVER_NAME;
 	if (pdata->allowed_protos)
-		rcdev->allowed_protos = pdata->allowed_protos;
+		rc_set_allowed_protocols(rcdev, pdata->allowed_protos);
 	else
-		rcdev->allowed_protos = RC_BIT_ALL;
+		rc_set_allowed_protocols(rcdev, RC_BIT_ALL);
 	rcdev->map_name = pdata->map_name ?: RC_MAP_EMPTY;
 
 	gpio_dev->rcdev = rcdev;
--- a/drivers/media/rc/iguanair.c
+++ b/drivers/media/rc/iguanair.c
@@ -494,7 +494,7 @@ static int iguanair_probe(struct usb_int
 	usb_to_input_id(ir->udev, &rc->input_id);
 	rc->dev.parent = &intf->dev;
 	rc->driver_type = RC_DRIVER_IR_RAW;
-	rc->allowed_protos = RC_BIT_ALL;
+	rc_set_allowed_protocols(rc, RC_BIT_ALL);
 	rc->priv = ir;
 	rc->open = iguanair_open;
 	rc->close = iguanair_close;
--- a/drivers/media/rc/imon.c
+++ b/drivers/media/rc/imon.c
@@ -1017,7 +1017,7 @@ static int imon_ir_change_protocol(struc
 	unsigned char ir_proto_packet[] = {
 		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x86 };
 
-	if (*rc_type && !(*rc_type & rc->allowed_protos))
+	if (*rc_type && !rc_protocols_allowed(rc, *rc_type))
 		dev_warn(dev, "Looks like you're trying to use an IR protocol "
 			 "this device does not support\n");
 
@@ -1867,7 +1867,8 @@ static struct rc_dev *imon_init_rdev(str
 
 	rdev->priv = ictx;
 	rdev->driver_type = RC_DRIVER_SCANCODE;
-	rdev->allowed_protos = RC_BIT_OTHER | RC_BIT_RC6_MCE; /* iMON PAD or MCE */
+					/* iMON PAD or MCE */
+	rc_set_allowed_protocols(rdev, RC_BIT_OTHER | RC_BIT_RC6_MCE);
 	rdev->change_protocol = imon_ir_change_protocol;
 	rdev->driver_name = MOD_NAME;
 
@@ -1880,7 +1881,7 @@ static struct rc_dev *imon_init_rdev(str
 
 	if (ictx->product == 0xffdc) {
 		imon_get_ffdc_type(ictx);
-		rdev->allowed_protos = ictx->rc_type;
+		rc_set_allowed_protocols(rdev, ictx->rc_type);
 	}
 
 	imon_set_display_type(ictx);
--- a/drivers/media/rc/ir-jvc-decoder.c
+++ b/drivers/media/rc/ir-jvc-decoder.c
@@ -47,7 +47,7 @@ static int ir_jvc_decode(struct rc_dev *
 {
 	struct jvc_dec *data = &dev->raw->jvc;
 
-	if (!(dev->enabled_protocols & RC_BIT_JVC))
+	if (!rc_protocols_enabled(dev, RC_BIT_JVC))
 		return 0;
 
 	if (!is_timing_event(ev)) {
--- a/drivers/media/rc/ir-lirc-codec.c
+++ b/drivers/media/rc/ir-lirc-codec.c
@@ -35,7 +35,7 @@ static int ir_lirc_decode(struct rc_dev 
 	struct lirc_codec *lirc = &dev->raw->lirc;
 	int sample;
 
-	if (!(dev->enabled_protocols & RC_BIT_LIRC))
+	if (!rc_protocols_enabled(dev, RC_BIT_LIRC))
 		return 0;
 
 	if (!dev->raw->lirc.drv || !dev->raw->lirc.drv->rbuf)
--- a/drivers/media/rc/ir-mce_kbd-decoder.c
+++ b/drivers/media/rc/ir-mce_kbd-decoder.c
@@ -216,7 +216,7 @@ static int ir_mce_kbd_decode(struct rc_d
 	u32 scancode;
 	unsigned long delay;
 
-	if (!(dev->enabled_protocols & RC_BIT_MCE_KBD))
+	if (!rc_protocols_enabled(dev, RC_BIT_MCE_KBD))
 		return 0;
 
 	if (!is_timing_event(ev)) {
--- a/drivers/media/rc/ir-nec-decoder.c
+++ b/drivers/media/rc/ir-nec-decoder.c
@@ -52,7 +52,7 @@ static int ir_nec_decode(struct rc_dev *
 	u8 address, not_address, command, not_command;
 	bool send_32bits = false;
 
-	if (!(dev->enabled_protocols & RC_BIT_NEC))
+	if (!rc_protocols_enabled(dev, RC_BIT_NEC))
 		return 0;
 
 	if (!is_timing_event(ev)) {
--- a/drivers/media/rc/ir-raw.c
+++ b/drivers/media/rc/ir-raw.c
@@ -256,7 +256,7 @@ int ir_raw_event_register(struct rc_dev 
 		return -ENOMEM;
 
 	dev->raw->dev = dev;
-	dev->enabled_protocols = ~0;
+	rc_set_enabled_protocols(dev, ~0);
 	rc = kfifo_alloc(&dev->raw->kfifo,
 			 sizeof(struct ir_raw_event) * MAX_IR_EVENT_SIZE,
 			 GFP_KERNEL);
--- a/drivers/media/rc/ir-rc5-decoder.c
+++ b/drivers/media/rc/ir-rc5-decoder.c
@@ -52,7 +52,7 @@ static int ir_rc5_decode(struct rc_dev *
 	u8 toggle;
 	u32 scancode;
 
-	if (!(dev->enabled_protocols & (RC_BIT_RC5 | RC_BIT_RC5X)))
+	if (!rc_protocols_enabled(dev, RC_BIT_RC5 | RC_BIT_RC5X))
 		return 0;
 
 	if (!is_timing_event(ev)) {
@@ -128,7 +128,7 @@ again:
 		if (data->wanted_bits == RC5X_NBITS) {
 			/* RC5X */
 			u8 xdata, command, system;
-			if (!(dev->enabled_protocols & RC_BIT_RC5X)) {
+			if (!rc_protocols_enabled(dev, RC_BIT_RC5X)) {
 				data->state = STATE_INACTIVE;
 				return 0;
 			}
@@ -145,7 +145,7 @@ again:
 		} else {
 			/* RC5 */
 			u8 command, system;
-			if (!(dev->enabled_protocols & RC_BIT_RC5)) {
+			if (!rc_protocols_enabled(dev, RC_BIT_RC5)) {
 				data->state = STATE_INACTIVE;
 				return 0;
 			}
--- a/drivers/media/rc/ir-rc5-sz-decoder.c
+++ b/drivers/media/rc/ir-rc5-sz-decoder.c
@@ -48,7 +48,7 @@ static int ir_rc5_sz_decode(struct rc_de
 	u8 toggle, command, system;
 	u32 scancode;
 
-	if (!(dev->enabled_protocols & RC_BIT_RC5_SZ))
+	if (!rc_protocols_enabled(dev, RC_BIT_RC5_SZ))
 		return 0;
 
 	if (!is_timing_event(ev)) {
--- a/drivers/media/rc/ir-rc6-decoder.c
+++ b/drivers/media/rc/ir-rc6-decoder.c
@@ -89,9 +89,9 @@ static int ir_rc6_decode(struct rc_dev *
 	u32 scancode;
 	u8 toggle;
 
-	if (!(dev->enabled_protocols &
-	      (RC_BIT_RC6_0 | RC_BIT_RC6_6A_20 | RC_BIT_RC6_6A_24 |
-	       RC_BIT_RC6_6A_32 | RC_BIT_RC6_MCE)))
+	if (!rc_protocols_enabled(dev, RC_BIT_RC6_0 | RC_BIT_RC6_6A_20 |
+				  RC_BIT_RC6_6A_24 | RC_BIT_RC6_6A_32 |
+				  RC_BIT_RC6_MCE))
 		return 0;
 
 	if (!is_timing_event(ev)) {
--- a/drivers/media/rc/ir-sanyo-decoder.c
+++ b/drivers/media/rc/ir-sanyo-decoder.c
@@ -58,7 +58,7 @@ static int ir_sanyo_decode(struct rc_dev
 	u32 scancode;
 	u8 address, command, not_command;
 
-	if (!(dev->enabled_protocols & RC_BIT_SANYO))
+	if (!rc_protocols_enabled(dev, RC_BIT_SANYO))
 		return 0;
 
 	if (!is_timing_event(ev)) {
--- a/drivers/media/rc/ir-sony-decoder.c
+++ b/drivers/media/rc/ir-sony-decoder.c
@@ -45,8 +45,8 @@ static int ir_sony_decode(struct rc_dev 
 	u32 scancode;
 	u8 device, subdevice, function;
 
-	if (!(dev->enabled_protocols &
-	      (RC_BIT_SONY12 | RC_BIT_SONY15 | RC_BIT_SONY20)))
+	if (!rc_protocols_enabled(dev, RC_BIT_SONY12 | RC_BIT_SONY15 |
+				  RC_BIT_SONY20))
 		return 0;
 
 	if (!is_timing_event(ev)) {
@@ -124,7 +124,7 @@ static int ir_sony_decode(struct rc_dev 
 
 		switch (data->count) {
 		case 12:
-			if (!(dev->enabled_protocols & RC_BIT_SONY12)) {
+			if (!rc_protocols_enabled(dev, RC_BIT_SONY12)) {
 				data->state = STATE_INACTIVE;
 				return 0;
 			}
@@ -133,7 +133,7 @@ static int ir_sony_decode(struct rc_dev 
 			function  = bitrev8((data->bits >>  4) & 0xFE);
 			break;
 		case 15:
-			if (!(dev->enabled_protocols & RC_BIT_SONY15)) {
+			if (!rc_protocols_enabled(dev, RC_BIT_SONY15)) {
 				data->state = STATE_INACTIVE;
 				return 0;
 			}
@@ -142,7 +142,7 @@ static int ir_sony_decode(struct rc_dev 
 			function  = bitrev8((data->bits >>  7) & 0xFE);
 			break;
 		case 20:
-			if (!(dev->enabled_protocols & RC_BIT_SONY20)) {
+			if (!rc_protocols_enabled(dev, RC_BIT_SONY20)) {
 				data->state = STATE_INACTIVE;
 				return 0;
 			}
--- a/drivers/media/rc/ite-cir.c
+++ b/drivers/media/rc/ite-cir.c
@@ -1563,7 +1563,7 @@ static int ite_probe(struct pnp_dev *pde
 	/* set up ir-core props */
 	rdev->priv = itdev;
 	rdev->driver_type = RC_DRIVER_IR_RAW;
-	rdev->allowed_protos = RC_BIT_ALL;
+	rc_set_allowed_protocols(rdev, RC_BIT_ALL);
 	rdev->open = ite_open;
 	rdev->close = ite_close;
 	rdev->s_idle = ite_s_idle;
--- a/drivers/media/rc/mceusb.c
+++ b/drivers/media/rc/mceusb.c
@@ -1217,7 +1217,7 @@ static struct rc_dev *mceusb_init_rc_dev
 	rc->dev.parent = dev;
 	rc->priv = ir;
 	rc->driver_type = RC_DRIVER_IR_RAW;
-	rc->allowed_protos = RC_BIT_ALL;
+	rc_set_allowed_protocols(rc, RC_BIT_ALL);
 	rc->timeout = MS_TO_NS(100);
 	if (!ir->flags.no_tx) {
 		rc->s_tx_mask = mceusb_set_tx_mask;
--- a/drivers/media/rc/nuvoton-cir.c
+++ b/drivers/media/rc/nuvoton-cir.c
@@ -1042,7 +1042,7 @@ static int nvt_probe(struct pnp_dev *pde
 	/* Set up the rc device */
 	rdev->priv = nvt;
 	rdev->driver_type = RC_DRIVER_IR_RAW;
-	rdev->allowed_protos = RC_BIT_ALL;
+	rc_set_allowed_protocols(rdev, RC_BIT_ALL);
 	rdev->open = nvt_open;
 	rdev->close = nvt_close;
 	rdev->tx_ir = nvt_tx_ir;
--- a/drivers/media/rc/rc-loopback.c
+++ b/drivers/media/rc/rc-loopback.c
@@ -195,7 +195,7 @@ static int __init loop_init(void)
 	rc->map_name		= RC_MAP_EMPTY;
 	rc->priv		= &loopdev;
 	rc->driver_type		= RC_DRIVER_IR_RAW;
-	rc->allowed_protos	= RC_BIT_ALL;
+	rc_set_allowed_protocols(rc, RC_BIT_ALL);
 	rc->timeout		= 100 * 1000 * 1000; /* 100 ms */
 	rc->min_timeout		= 1;
 	rc->max_timeout		= UINT_MAX;
--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -633,6 +633,7 @@ EXPORT_SYMBOL_GPL(rc_repeat);
 static void ir_do_keydown(struct rc_dev *dev, int scancode,
 			  u32 keycode, u8 toggle)
 {
+	struct rc_scancode_filter *filter;
 	bool new_event = !dev->keypressed ||
 			 dev->last_scancode != scancode ||
 			 dev->last_toggle != toggle;
@@ -640,6 +641,11 @@ static void ir_do_keydown(struct rc_dev 
 	if (new_event && dev->keypressed)
 		ir_do_keyup(dev, false);
 
+	/* Generic scancode filtering */
+	filter = &dev->scancode_filters[RC_FILTER_NORMAL];
+	if (filter->mask && ((scancode ^ filter->data) & filter->mask))
+		return;
+
 	input_event(dev->input_dev, EV_MSC, MSC_SCAN, scancode);
 
 	if (new_event && keycode != KEY_RESERVED) {
@@ -795,13 +801,38 @@ static struct {
 };
 
 /**
- * show_protocols() - shows the current IR protocol(s)
+ * struct rc_filter_attribute - Device attribute relating to a filter type.
+ * @attr:	Device attribute.
+ * @type:	Filter type.
+ * @mask:	false for filter value, true for filter mask.
+ */
+struct rc_filter_attribute {
+	struct device_attribute		attr;
+	enum rc_filter_type		type;
+	bool				mask;
+};
+#define to_rc_filter_attr(a) container_of(a, struct rc_filter_attribute, attr)
+
+#define RC_PROTO_ATTR(_name, _mode, _show, _store, _type)		\
+	struct rc_filter_attribute dev_attr_##_name = {			\
+		.attr = __ATTR(_name, _mode, _show, _store),		\
+		.type = (_type),					\
+	}
+#define RC_FILTER_ATTR(_name, _mode, _show, _store, _type, _mask)	\
+	struct rc_filter_attribute dev_attr_##_name = {			\
+		.attr = __ATTR(_name, _mode, _show, _store),		\
+		.type = (_type),					\
+		.mask = (_mask),					\
+	}
+
+/**
+ * show_protocols() - shows the current/wakeup IR protocol(s)
  * @device:	the device descriptor
  * @mattr:	the device attribute struct (unused)
  * @buf:	a pointer to the output buffer
  *
  * This routine is a callback routine for input read the IR protocol type(s).
- * it is trigged by reading /sys/class/rc/rc?/protocols.
+ * it is trigged by reading /sys/class/rc/rc?/[wakeup_]protocols.
  * It returns the protocol names of supported protocols.
  * Enabled protocols are printed in brackets.
  *
@@ -812,6 +843,7 @@ static ssize_t show_protocols(struct dev
 			      struct device_attribute *mattr, char *buf)
 {
 	struct rc_dev *dev = to_rc_dev(device);
+	struct rc_filter_attribute *fattr = to_rc_filter_attr(mattr);
 	u64 allowed, enabled;
 	char *tmp = buf;
 	int i;
@@ -822,9 +854,10 @@ static ssize_t show_protocols(struct dev
 
 	mutex_lock(&dev->lock);
 
-	enabled = dev->enabled_protocols;
-	if (dev->driver_type == RC_DRIVER_SCANCODE)
-		allowed = dev->allowed_protos;
+	enabled = dev->enabled_protocols[fattr->type];
+	if (dev->driver_type == RC_DRIVER_SCANCODE ||
+	    fattr->type == RC_FILTER_WAKEUP)
+		allowed = dev->allowed_protocols[fattr->type];
 	else if (dev->raw)
 		allowed = ir_raw_get_allowed_protocols();
 	else {
@@ -856,14 +889,14 @@ static ssize_t show_protocols(struct dev
 }
 
 /**
- * store_protocols() - changes the current IR protocol(s)
+ * store_protocols() - changes the current/wakeup IR protocol(s)
  * @device:	the device descriptor
  * @mattr:	the device attribute struct (unused)
  * @buf:	a pointer to the input buffer
  * @len:	length of the input buffer
  *
  * This routine is for changing the IR protocol type.
- * It is trigged by writing to /sys/class/rc/rc?/protocols.
+ * It is trigged by writing to /sys/class/rc/rc?/[wakeup_]protocols.
  * Writing "+proto" will add a protocol to the list of enabled protocols.
  * Writing "-proto" will remove a protocol from the list of enabled protocols.
  * Writing "proto" will enable only "proto".
@@ -880,12 +913,15 @@ static ssize_t store_protocols(struct de
 			       size_t len)
 {
 	struct rc_dev *dev = to_rc_dev(device);
+	struct rc_filter_attribute *fattr = to_rc_filter_attr(mattr);
 	bool enable, disable;
 	const char *tmp;
-	u64 type;
+	u64 old_type, type;
 	u64 mask;
 	int rc, i, count = 0;
 	ssize_t ret;
+	int (*change_protocol)(struct rc_dev *dev, u64 *rc_type);
+	struct rc_scancode_filter local_filter, *filter;
 
 	/* Device is being removed */
 	if (!dev)
@@ -898,7 +934,8 @@ static ssize_t store_protocols(struct de
 		ret = -EINVAL;
 		goto out;
 	}
-	type = dev->enabled_protocols;
+	old_type = dev->enabled_protocols[fattr->type];
+	type = old_type;
 
 	while ((tmp = strsep((char **) &data, " \n")) != NULL) {
 		if (!*tmp)
@@ -946,8 +983,10 @@ static ssize_t store_protocols(struct de
 		goto out;
 	}
 
-	if (dev->change_protocol) {
-		rc = dev->change_protocol(dev, &type);
+	change_protocol = (fattr->type == RC_FILTER_NORMAL)
+		? dev->change_protocol : dev->change_wakeup_protocol;
+	if (change_protocol) {
+		rc = change_protocol(dev, &type);
 		if (rc < 0) {
 			IR_dprintk(1, "Error setting protocols to 0x%llx\n",
 				   (long long)type);
@@ -956,10 +995,40 @@ static ssize_t store_protocols(struct de
 		}
 	}
 
-	dev->enabled_protocols = type;
+	dev->enabled_protocols[fattr->type] = type;
 	IR_dprintk(1, "Current protocol(s): 0x%llx\n",
 		   (long long)type);
 
+	/*
+	 * If the protocol is changed the filter needs updating.
+	 * Try setting the same filter with the new protocol (if any).
+	 * Fall back to clearing the filter.
+	 */
+	filter = &dev->scancode_filters[fattr->type];
+	if (old_type != type && filter->mask) {
+		local_filter = *filter;
+		if (!type) {
+			/* no protocol => clear filter */
+			ret = -1;
+		} else if (!dev->s_filter) {
+			/* generic filtering => accept any filter */
+			ret = 0;
+		} else {
+			/* hardware filtering => try setting, otherwise clear */
+			ret = dev->s_filter(dev, fattr->type, &local_filter);
+		}
+		if (ret < 0) {
+			/* clear the filter */
+			local_filter.data = 0;
+			local_filter.mask = 0;
+			if (dev->s_filter)
+				dev->s_filter(dev, fattr->type, &local_filter);
+		}
+
+		/* commit the new filter */
+		*filter = local_filter;
+	}
+
 	ret = len;
 
 out:
@@ -967,6 +1036,115 @@ out:
 	return ret;
 }
 
+/**
+ * show_filter() - shows the current scancode filter value or mask
+ * @device:	the device descriptor
+ * @attr:	the device attribute struct
+ * @buf:	a pointer to the output buffer
+ *
+ * This routine is a callback routine to read a scancode filter value or mask.
+ * It is trigged by reading /sys/class/rc/rc?/[wakeup_]filter[_mask].
+ * It prints the current scancode filter value or mask of the appropriate filter
+ * type in hexadecimal into @buf and returns the size of the buffer.
+ *
+ * Bits of the filter value corresponding to set bits in the filter mask are
+ * compared against input scancodes and non-matching scancodes are discarded.
+ *
+ * dev->lock is taken to guard against races between device registration,
+ * store_filter and show_filter.
+ */
+static ssize_t show_filter(struct device *device,
+			   struct device_attribute *attr,
+			   char *buf)
+{
+	struct rc_dev *dev = to_rc_dev(device);
+	struct rc_filter_attribute *fattr = to_rc_filter_attr(attr);
+	u32 val;
+
+	/* Device is being removed */
+	if (!dev)
+		return -EINVAL;
+
+	mutex_lock(&dev->lock);
+	if (fattr->mask)
+		val = dev->scancode_filters[fattr->type].mask;
+	else
+		val = dev->scancode_filters[fattr->type].data;
+	mutex_unlock(&dev->lock);
+
+	return sprintf(buf, "%#x\n", val);
+}
+
+/**
+ * store_filter() - changes the scancode filter value
+ * @device:	the device descriptor
+ * @attr:	the device attribute struct
+ * @buf:	a pointer to the input buffer
+ * @len:	length of the input buffer
+ *
+ * This routine is for changing a scancode filter value or mask.
+ * It is trigged by writing to /sys/class/rc/rc?/[wakeup_]filter[_mask].
+ * Returns -EINVAL if an invalid filter value for the current protocol was
+ * specified or if scancode filtering is not supported by the driver, otherwise
+ * returns @len.
+ *
+ * Bits of the filter value corresponding to set bits in the filter mask are
+ * compared against input scancodes and non-matching scancodes are discarded.
+ *
+ * dev->lock is taken to guard against races between device registration,
+ * store_filter and show_filter.
+ */
+static ssize_t store_filter(struct device *device,
+			    struct device_attribute *attr,
+			    const char *buf,
+			    size_t count)
+{
+	struct rc_dev *dev = to_rc_dev(device);
+	struct rc_filter_attribute *fattr = to_rc_filter_attr(attr);
+	struct rc_scancode_filter local_filter, *filter;
+	int ret;
+	unsigned long val;
+
+	/* Device is being removed */
+	if (!dev)
+		return -EINVAL;
+
+	ret = kstrtoul(buf, 0, &val);
+	if (ret < 0)
+		return ret;
+
+	/* Scancode filter not supported (but still accept 0) */
+	if (!dev->s_filter && fattr->type != RC_FILTER_NORMAL)
+		return val ? -EINVAL : count;
+
+	mutex_lock(&dev->lock);
+
+	/* Tell the driver about the new filter */
+	filter = &dev->scancode_filters[fattr->type];
+	local_filter = *filter;
+	if (fattr->mask)
+		local_filter.mask = val;
+	else
+		local_filter.data = val;
+	if (!dev->enabled_protocols[fattr->type] && local_filter.mask) {
+		/* refuse to set a filter unless a protocol is enabled */
+		ret = -EINVAL;
+		goto unlock;
+	}
+	if (dev->s_filter) {
+		ret = dev->s_filter(dev, fattr->type, &local_filter);
+		if (ret < 0)
+			goto unlock;
+	}
+
+	/* Success, commit the new filter */
+	*filter = local_filter;
+
+unlock:
+	mutex_unlock(&dev->lock);
+	return (ret < 0) ? ret : count;
+}
+
 static void rc_dev_release(struct device *device)
 {
 }
@@ -996,11 +1174,26 @@ static int rc_dev_uevent(struct device *
 /*
  * Static device attribute struct with the sysfs attributes for IR's
  */
-static DEVICE_ATTR(protocols, S_IRUGO | S_IWUSR,
-		   show_protocols, store_protocols);
+static RC_PROTO_ATTR(protocols, S_IRUGO | S_IWUSR,
+		     show_protocols, store_protocols, RC_FILTER_NORMAL);
+static RC_PROTO_ATTR(wakeup_protocols, S_IRUGO | S_IWUSR,
+		     show_protocols, store_protocols, RC_FILTER_WAKEUP);
+static RC_FILTER_ATTR(filter, S_IRUGO|S_IWUSR,
+		      show_filter, store_filter, RC_FILTER_NORMAL, false);
+static RC_FILTER_ATTR(filter_mask, S_IRUGO|S_IWUSR,
+		      show_filter, store_filter, RC_FILTER_NORMAL, true);
+static RC_FILTER_ATTR(wakeup_filter, S_IRUGO|S_IWUSR,
+		      show_filter, store_filter, RC_FILTER_WAKEUP, false);
+static RC_FILTER_ATTR(wakeup_filter_mask, S_IRUGO|S_IWUSR,
+		      show_filter, store_filter, RC_FILTER_WAKEUP, true);
 
 static struct attribute *rc_dev_attrs[] = {
-	&dev_attr_protocols.attr,
+	&dev_attr_protocols.attr.attr,
+	&dev_attr_wakeup_protocols.attr.attr,
+	&dev_attr_filter.attr.attr,
+	&dev_attr_filter_mask.attr.attr,
+	&dev_attr_wakeup_filter.attr.attr,
+	&dev_attr_wakeup_filter_mask.attr.attr,
 	NULL,
 };
 
@@ -1091,14 +1284,6 @@ int rc_register_device(struct rc_dev *de
 	if (dev->close)
 		dev->input_dev->close = ir_close;
 
-	/*
-	 * Take the lock here, as the device sysfs node will appear
-	 * when device_add() is called, which may trigger an ir-keytable udev
-	 * rule, which will in turn call show_protocols and access
-	 * dev->enabled_protocols before it has been initialized.
-	 */
-	mutex_lock(&dev->lock);
-
 	do {
 		devno = find_first_zero_bit(ir_core_dev_number,
 					    IRRCV_NUM_DEVICES);
@@ -1107,6 +1292,14 @@ int rc_register_device(struct rc_dev *de
 			return -ENOMEM;
 	} while (test_and_set_bit(devno, ir_core_dev_number));
 
+	/*
+	 * Take the lock here, as the device sysfs node will appear
+	 * when device_add() is called, which may trigger an ir-keytable udev
+	 * rule, which will in turn call show_protocols and access
+	 * dev->enabled_protocols before it has been initialized.
+	 */
+	mutex_lock(&dev->lock);
+
 	dev->devno = devno;
 	dev_set_name(&dev->dev, "rc%ld", dev->devno);
 	dev_set_drvdata(&dev->dev, dev);
@@ -1172,7 +1365,7 @@ int rc_register_device(struct rc_dev *de
 		rc = dev->change_protocol(dev, &rc_type);
 		if (rc < 0)
 			goto out_raw;
-		dev->enabled_protocols = rc_type;
+		dev->enabled_protocols[RC_FILTER_NORMAL] = rc_type;
 	}
 
 	mutex_unlock(&dev->lock);
--- a/drivers/media/rc/redrat3.c
+++ b/drivers/media/rc/redrat3.c
@@ -922,7 +922,7 @@ static struct rc_dev *redrat3_init_rc_de
 	rc->dev.parent = dev;
 	rc->priv = rr3;
 	rc->driver_type = RC_DRIVER_IR_RAW;
-	rc->allowed_protos = RC_BIT_ALL;
+	rc_set_allowed_protocols(rc, RC_BIT_ALL);
 	rc->timeout = US_TO_NS(2750);
 	rc->tx_ir = redrat3_transmit_ir;
 	rc->s_tx_carrier = redrat3_set_tx_carrier;
--- a/drivers/media/rc/st_rc.c
+++ b/drivers/media/rc/st_rc.c
@@ -287,7 +287,7 @@ static int st_rc_probe(struct platform_d
 	st_rc_hardware_init(rc_dev);
 
 	rdev->driver_type = RC_DRIVER_IR_RAW;
-	rdev->allowed_protos = RC_BIT_ALL;
+	rc_set_allowed_protocols(rdev, RC_BIT_ALL);
 	/* rx sampling rate is 10Mhz */
 	rdev->rx_resolution = 100;
 	rdev->timeout = US_TO_NS(MAX_SYMB_TIME);
--- a/drivers/media/rc/streamzap.c
+++ b/drivers/media/rc/streamzap.c
@@ -322,7 +322,7 @@ static struct rc_dev *streamzap_init_rc_
 	rdev->dev.parent = dev;
 	rdev->priv = sz;
 	rdev->driver_type = RC_DRIVER_IR_RAW;
-	rdev->allowed_protos = RC_BIT_ALL;
+	rc_set_allowed_protocols(rdev, RC_BIT_ALL);
 	rdev->driver_name = DRIVER_NAME;
 	rdev->map_name = RC_MAP_STREAMZAP;
 
--- a/drivers/media/rc/ttusbir.c
+++ b/drivers/media/rc/ttusbir.c
@@ -318,7 +318,7 @@ static int ttusbir_probe(struct usb_inte
 	usb_to_input_id(tt->udev, &rc->input_id);
 	rc->dev.parent = &intf->dev;
 	rc->driver_type = RC_DRIVER_IR_RAW;
-	rc->allowed_protos = RC_BIT_ALL;
+	rc_set_allowed_protocols(rc, RC_BIT_ALL);
 	rc->priv = tt;
 	rc->driver_name = DRIVER_NAME;
 	rc->map_name = RC_MAP_TT_1500;
--- a/drivers/media/rc/winbond-cir.c
+++ b/drivers/media/rc/winbond-cir.c
@@ -1082,7 +1082,7 @@ wbcir_probe(struct pnp_dev *device, cons
 	data->dev->dev.parent = &device->dev;
 	data->dev->timeout = MS_TO_NS(100);
 	data->dev->rx_resolution = US_TO_NS(2);
-	data->dev->allowed_protos = RC_BIT_ALL;
+	rc_set_allowed_protocols(data->dev, RC_BIT_ALL);
 
 	err = rc_register_device(data->dev);
 	if (err)
--- a/drivers/media/usb/dvb-usb/dvb-usb-remote.c
+++ b/drivers/media/usb/dvb-usb/dvb-usb-remote.c
@@ -272,7 +272,7 @@ static int rc_core_dvb_usb_remote_init(s
 	dev->driver_name = d->props.rc.core.module_name;
 	dev->map_name = d->props.rc.core.rc_codes;
 	dev->change_protocol = d->props.rc.core.change_protocol;
-	dev->allowed_protos = d->props.rc.core.allowed_protos;
+	rc_set_allowed_protocols(dev, d->props.rc.core.allowed_protos);
 	dev->driver_type = d->props.rc.core.driver_type;
 	usb_to_input_id(d->udev, &dev->input_id);
 	dev->input_name = "IR-receiver inside an USB DVB receiver";
--- a/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c
+++ b/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c
@@ -164,7 +164,7 @@ static int dvb_usbv2_remote_init(struct 
 	dev->driver_name = (char *) d->props->driver_name;
 	dev->map_name = d->rc.map_name;
 	dev->driver_type = d->rc.driver_type;
-	dev->allowed_protos = d->rc.allowed_protos;
+	rc_set_allowed_protocols(dev, d->rc.allowed_protos);
 	dev->change_protocol = d->rc.change_protocol;
 	dev->priv = d;
 
--- a/drivers/media/usb/em28xx/em28xx-input.c
+++ b/drivers/media/usb/em28xx/em28xx-input.c
@@ -725,7 +725,7 @@ static int em28xx_ir_init(struct em28xx 
 		case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
 			rc->map_name = RC_MAP_HAUPPAUGE;
 			ir->get_key_i2c = em28xx_get_key_em_haup;
-			rc->allowed_protos = RC_BIT_RC5;
+			rc_set_allowed_protocols(rc, RC_BIT_RC5);
 			break;
 		case EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE:
 			rc->map_name = RC_MAP_WINFAST_USBII_DELUXE;
@@ -741,7 +741,7 @@ static int em28xx_ir_init(struct em28xx 
 		switch (dev->chip_id) {
 		case CHIP_ID_EM2860:
 		case CHIP_ID_EM2883:
-			rc->allowed_protos = RC_BIT_RC5 | RC_BIT_NEC;
+			rc_set_allowed_protocols(rc, RC_BIT_RC5 | RC_BIT_NEC);
 			ir->get_key = default_polling_getkey;
 			break;
 		case CHIP_ID_EM2884:
@@ -749,8 +749,8 @@ static int em28xx_ir_init(struct em28xx 
 		case CHIP_ID_EM28174:
 		case CHIP_ID_EM28178:
 			ir->get_key = em2874_polling_getkey;
-			rc->allowed_protos = RC_BIT_RC5 | RC_BIT_NEC |
-					     RC_BIT_RC6_0;
+			rc_set_allowed_protocols(rc, RC_BIT_RC5 | RC_BIT_NEC |
+						 RC_BIT_RC6_0);
 			break;
 		default:
 			err = -ENODEV;
--- a/drivers/media/usb/tm6000/tm6000-input.c
+++ b/drivers/media/usb/tm6000/tm6000-input.c
@@ -422,7 +422,7 @@ int tm6000_ir_init(struct tm6000_core *d
 	ir->rc = rc;
 
 	/* input setup */
-	rc->allowed_protos = RC_BIT_RC5 | RC_BIT_NEC;
+	rc_set_allowed_protocols(rc, RC_BIT_RC5 | RC_BIT_NEC);
 	/* Neded, in order to support NEC remotes with 24 or 32 bits */
 	rc->scanmask = 0xffff;
 	rc->priv = ir;
--- a/include/media/rc-core.h
+++ b/include/media/rc-core.h
@@ -35,6 +35,29 @@ enum rc_driver_type {
 };
 
 /**
+ * struct rc_scancode_filter - Filter scan codes.
+ * @data:	Scancode data to match.
+ * @mask:	Mask of bits of scancode to compare.
+ */
+struct rc_scancode_filter {
+	u32 data;
+	u32 mask;
+};
+
+/**
+ * enum rc_filter_type - Filter type constants.
+ * @RC_FILTER_NORMAL:	Filter for normal operation.
+ * @RC_FILTER_WAKEUP:	Filter for waking from suspend.
+ * @RC_FILTER_MAX:	Number of filter types.
+ */
+enum rc_filter_type {
+	RC_FILTER_NORMAL = 0,
+	RC_FILTER_WAKEUP,
+
+	RC_FILTER_MAX
+};
+
+/**
  * struct rc_dev - represents a remote control device
  * @dev: driver model's view of this device
  * @input_name: name of the input child device
@@ -50,8 +73,10 @@ enum rc_driver_type {
  * @input_dev: the input child device used to communicate events to userspace
  * @driver_type: specifies if protocol decoding is done in hardware or software
  * @idle: used to keep track of RX state
- * @allowed_protos: bitmask with the supported RC_BIT_* protocols
- * @enabled_protocols: bitmask with the enabled RC_BIT_* protocols
+ * @allowed_protocols: bitmask with the supported RC_BIT_* protocols for each
+ *	filter type
+ * @enabled_protocols: bitmask with the enabled RC_BIT_* protocols for each
+ *	filter type
  * @scanmask: some hardware decoders are not capable of providing the full
  *	scancode to the application. As this is a hardware limit, we can't do
  *	anything with it. Yet, as the same keycode table can be used with other
@@ -70,7 +95,10 @@ enum rc_driver_type {
  * @max_timeout: maximum timeout supported by device
  * @rx_resolution : resolution (in ns) of input sampler
  * @tx_resolution: resolution (in ns) of output sampler
+ * @scancode_filters: scancode filters (indexed by enum rc_filter_type)
  * @change_protocol: allow changing the protocol used on hardware decoders
+ * @change_wakeup_protocol: allow changing the protocol used for wakeup
+ *	filtering
  * @open: callback to allow drivers to enable polling/irq when IR input device
  *	is opened.
  * @close: callback to allow drivers to disable polling/irq when IR input device
@@ -84,6 +112,7 @@ enum rc_driver_type {
  *	device doesn't interrupt host until it sees IR pulses
  * @s_learning_mode: enable wide band receiver used for learning
  * @s_carrier_report: enable carrier reports
+ * @s_filter: set the scancode filter of a given type
  */
 struct rc_dev {
 	struct device			dev;
@@ -99,8 +128,8 @@ struct rc_dev {
 	struct input_dev		*input_dev;
 	enum rc_driver_type		driver_type;
 	bool				idle;
-	u64				allowed_protos;
-	u64				enabled_protocols;
+	u64				allowed_protocols[RC_FILTER_MAX];
+	u64				enabled_protocols[RC_FILTER_MAX];
 	u32				users;
 	u32				scanmask;
 	void				*priv;
@@ -116,7 +145,9 @@ struct rc_dev {
 	u32				max_timeout;
 	u32				rx_resolution;
 	u32				tx_resolution;
+	struct rc_scancode_filter	scancode_filters[RC_FILTER_MAX];
 	int				(*change_protocol)(struct rc_dev *dev, u64 *rc_type);
+	int				(*change_wakeup_protocol)(struct rc_dev *dev, u64 *rc_type);
 	int				(*open)(struct rc_dev *dev);
 	void				(*close)(struct rc_dev *dev);
 	int				(*s_tx_mask)(struct rc_dev *dev, u32 mask);
@@ -127,10 +158,49 @@ struct rc_dev {
 	void				(*s_idle)(struct rc_dev *dev, bool enable);
 	int				(*s_learning_mode)(struct rc_dev *dev, int enable);
 	int				(*s_carrier_report) (struct rc_dev *dev, int enable);
+	int				(*s_filter)(struct rc_dev *dev,
+						    enum rc_filter_type type,
+						    struct rc_scancode_filter *filter);
 };
 
 #define to_rc_dev(d) container_of(d, struct rc_dev, dev)
 
+static inline bool rc_protocols_allowed(struct rc_dev *rdev, u64 protos)
+{
+	return rdev->allowed_protocols[RC_FILTER_NORMAL] & protos;
+}
+
+/* should be called prior to registration or with mutex held */
+static inline void rc_set_allowed_protocols(struct rc_dev *rdev, u64 protos)
+{
+	rdev->allowed_protocols[RC_FILTER_NORMAL] = protos;
+}
+
+static inline bool rc_protocols_enabled(struct rc_dev *rdev, u64 protos)
+{
+	return rdev->enabled_protocols[RC_FILTER_NORMAL] & protos;
+}
+
+/* should be called prior to registration or with mutex held */
+static inline void rc_set_enabled_protocols(struct rc_dev *rdev, u64 protos)
+{
+	rdev->enabled_protocols[RC_FILTER_NORMAL] = protos;
+}
+
+/* should be called prior to registration or with mutex held */
+static inline void rc_set_allowed_wakeup_protocols(struct rc_dev *rdev,
+						   u64 protos)
+{
+	rdev->allowed_protocols[RC_FILTER_WAKEUP] = protos;
+}
+
+/* should be called prior to registration or with mutex held */
+static inline void rc_set_enabled_wakeup_protocols(struct rc_dev *rdev,
+						   u64 protos)
+{
+	rdev->enabled_protocols[RC_FILTER_WAKEUP] = protos;
+}
+
 /*
  * From rc-main.c
  * Those functions can be used on any type of Remote Controller. They