wifipineapple-openwrt/target/linux/brcm2708/patches-3.18/0049-BCM2708-Add-core-Device-Tree-support.patch

From f6459ef9602c16b02516be4848a77d30ce75d168 Mon Sep 17 00:00:00 2001
From: notro <notro@tronnes.org>
Date: Wed, 9 Jul 2014 14:46:08 +0200
Subject: [PATCH 049/114] BCM2708: Add core Device Tree support

Add the bare minimum needed to boot BCM2708 from a Device Tree.

Signed-off-by: Noralf Tronnes <notro@tronnes.org>

BCM2708: DT: change 'axi' nodename to 'soc'

Change DT node named 'axi' to 'soc' so it matches ARCH_BCM2835.
The VC4 bootloader fills in certain properties in the 'axi' subtree,
but since this is part of an upstreaming effort, the name is changed.

Signed-off-by: Noralf Tronnes notro@tronnes.org
---
 arch/arm/boot/dts/Makefile          |  1 +
 arch/arm/boot/dts/bcm2708-rpi-b.dts |  8 ++++++++
 arch/arm/boot/dts/bcm2708.dtsi      | 27 +++++++++++++++++++++++++++
 arch/arm/mach-bcm2708/Kconfig       |  8 ++++++++
 arch/arm/mach-bcm2708/bcm2708.c     | 24 ++++++++++++++++++++++++
 5 files changed, 68 insertions(+)
 create mode 100644 arch/arm/boot/dts/bcm2708-rpi-b.dts
 create mode 100644 arch/arm/boot/dts/bcm2708.dtsi

--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -53,6 +53,7 @@ dtb-$(CONFIG_ARCH_AT91)	+= at91-sama5d4e
 
 dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb
 dtb-$(CONFIG_ARCH_AXXIA) += axm5516-amarillo.dtb
+dtb-$(CONFIG_BCM2708_DT) += bcm2708-rpi-b.dtb
 dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
 dtb-$(CONFIG_ARCH_BCM_5301X) += bcm4708-netgear-r6250.dtb
 dtb-$(CONFIG_ARCH_BCM_63XX) += bcm963138dvt.dtb
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2708-rpi-b.dts
@@ -0,0 +1,8 @@
+/dts-v1/;
+
+/include/ "bcm2708.dtsi"
+
+/ {
+	compatible = "brcm,bcm2708";
+	model = "Raspberry Pi";
+};
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2708.dtsi
@@ -0,0 +1,27 @@
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "brcm,bcm2708";
+	model = "BCM2708";
+
+	chosen {
+		/*
+		   bootargs must be 1024 characters long because the
+		   VC bootloader can't expand it
+		*/
+		bootargs = "console=ttyAMA0                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                 ";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x7e000000 0x20000000 0x02000000>;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
--- a/arch/arm/mach-bcm2708/Kconfig
+++ b/arch/arm/mach-bcm2708/Kconfig
@@ -9,6 +9,14 @@ config MACH_BCM2708
 	help
 	  Include support for the Broadcom(R) BCM2708 platform.
 
+config BCM2708_DT
+	bool "BCM2708 Device Tree support"
+	depends on MACH_BCM2708
+	default n
+	select USE_OF
+	help
+	  Enable Device Tree support for BCM2708
+
 config BCM2708_GPIO
 	bool "BCM2708 gpio support"
 	depends on MACH_BCM2708
--- a/arch/arm/mach-bcm2708/bcm2708.c
+++ b/arch/arm/mach-bcm2708/bcm2708.c
@@ -33,6 +33,7 @@
 #include <linux/cnt32_to_63.h>
 #include <linux/io.h>
 #include <linux/module.h>
+#include <linux/of_platform.h>
 #include <linux/spi/spi.h>
 #include <linux/w1-gpio.h>
 
@@ -734,6 +735,22 @@ static void bcm2708_power_off(void)
 	}
 }
 
+#ifdef CONFIG_OF
+static void __init bcm2708_dt_init(void)
+{
+	int ret;
+
+	of_clk_init(NULL);
+	ret = of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+	if (ret) {
+		pr_err("of_platform_populate failed: %d\n", ret);
+		BUG();
+	}
+}
+#else
+static void __init bcm2708_dt_init(void) { }
+#endif /* CONFIG_OF */
+
 void __init bcm2708_init(void)
 {
 	int i;
@@ -745,6 +762,7 @@ void __init bcm2708_init(void)
 	pm_power_off = bcm2708_power_off;
 
 	bcm2708_init_clocks();
+	bcm2708_dt_init();
 
 	bcm_register_device(&bcm2708_dmaman_device);
 	bcm_register_device(&bcm2708_vcio_device);
@@ -965,6 +983,11 @@ static void __init board_reserve(void)
 #endif
 }
 
+static const char * const bcm2708_compat[] = {
+	"brcm,bcm2708",
+	NULL
+};
+
 MACHINE_START(BCM2708, "BCM2708")
     /* Maintainer: Broadcom Europe Ltd. */
 	.map_io = bcm2708_map_io,
@@ -974,6 +997,7 @@ MACHINE_START(BCM2708, "BCM2708")
 	.init_early = bcm2708_init_early,
 	.reserve = board_reserve,
 	.restart	= bcm2708_restart,
+	.dt_compat = bcm2708_compat,
 MACHINE_END
 
 module_param(boardrev, uint, 0644);