wifipineapple-openwrt/target/linux/pxa/patches-2.6.21/009-bkpxa-pxa-cpu.patch

114 lines
3.9 KiB
Diff
Raw Normal View History

Status: WORKS
PXA CPU enhancements
from patch 1667:
- 64K PTEs
from hh.org-cvs:
- support in pxa_gpio_mode for active low
#
# Patch managed by http://www.mn-logistik.de/unsupported/pxa250/patcher
#
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -474,11 +474,62 @@ ENTRY(cpu_xscale_set_pte_ext)
movne r2, #0 @ no -> fault
str r2, [r0] @ hardware version
+
+ @ We try to map 64K page entries when possible.
+ @ We do that for kernel space only since the usage pattern from
+ @ the setting of VM area is quite simple. User space is not worth
+ @ the implied complexity because of ever randomly changing PTEs
+ @ (page aging, swapout, etc) requiring constant coherency checks.
+ @ Since PTEs are usually set in increasing order, we test the
+ @ possibility for a large page only when given the last PTE of a
+ @ 64K boundary.
+ tsteq r1, #L_PTE_USER
+ andeq r1, r0, #(15 << 2)
+ teqeq r1, #(15 << 2)
+ beq 1f
+
mov ip, #0
mcr p15, 0, r0, c7, c10, 1 @ Clean D cache line
mcr p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer
mov pc, lr
+ @ See if we have 16 identical PTEs but with consecutive base addresses
+1: bic r3, r2, #0x0000f000
+ mov r1, #0x0000f000
+2: eor r2, r2, r3
+ teq r2, r1
+ bne 4f
+ subs r1, r1, #0x00001000
+ ldr r2, [r0, #-4]!
+ bne 2b
+ eors r2, r2, r3
+ bne 4f
+
+ @ Now create our LARGE PTE from the current EXT one.
+ bic r3, r3, #PTE_TYPE_MASK
+ orr r3, r3, #PTE_TYPE_LARGE
+ and r2, r3, #0x30 @ EXT_AP --> LARGE_AP0
+ orr r2, r2, r2, lsl #2 @ add LARGE_AP1
+ orr r2, r2, r2, lsl #4 @ add LARGE_AP3 + LARGE_AP2
+ and r1, r3, #0x3c0 @ EXT_TEX
+ bic r3, r3, #0x3c0
+ orr r2, r2, r1, lsl #(12 - 6) @ --> LARGE_TEX
+ orr r2, r2, r3 @ add remaining bits
+
+ @ then put it in the pagetable
+ mov r3, r2
+3: strd r2, [r0], #8
+ tst r0, #(15 << 2)
+ bne 3b
+
+ @ Then sync the 2 corresponding cache lines
+ sub r0, r0, #(16 << 2)
+ mcr p15, 0, r0, c7, c10, 1 @ Clean D cache line
+4: orr r0, r0, #(15 << 2)
+ mcr p15, 0, r0, c7, c10, 1 @ Clean D cache line
+ mov ip, #0
+ mcr p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer
+ mov pc, lr
.ltorg
--- a/include/asm-arm/arch-pxa/pxa-regs.h
+++ b/include/asm-arm/arch-pxa/pxa-regs.h
@@ -1345,6 +1345,7 @@
#define GPIO_ALT_FN_2_OUT 0x280
#define GPIO_ALT_FN_3_IN 0x300
#define GPIO_ALT_FN_3_OUT 0x380
+#define GPIO_ACTIVE_LOW 0x1000
#define GPIO_MD_MASK_NR 0x07f
#define GPIO_MD_MASK_DIR 0x080
#define GPIO_MD_MASK_FN 0x300
@@ -1597,6 +1598,25 @@
#define PWER_GPIO15 PWER_GPIO (15) /* GPIO [15] wake-up enable */
#define PWER_RTC 0x80000000 /* RTC alarm wake-up enable */
+#define PWER_GPIO(Nb) (1 << Nb) /* GPIO [0..15] wake-up enable */
+#define PWER_GPIO0 PWER_GPIO (0) /* GPIO [0] wake-up enable */
+#define PWER_GPIO1 PWER_GPIO (1) /* GPIO [1] wake-up enable */
+#define PWER_GPIO2 PWER_GPIO (2) /* GPIO [2] wake-up enable */
+#define PWER_GPIO3 PWER_GPIO (3) /* GPIO [3] wake-up enable */
+#define PWER_GPIO4 PWER_GPIO (4) /* GPIO [4] wake-up enable */
+#define PWER_GPIO5 PWER_GPIO (5) /* GPIO [5] wake-up enable */
+#define PWER_GPIO6 PWER_GPIO (6) /* GPIO [6] wake-up enable */
+#define PWER_GPIO7 PWER_GPIO (7) /* GPIO [7] wake-up enable */
+#define PWER_GPIO8 PWER_GPIO (8) /* GPIO [8] wake-up enable */
+#define PWER_GPIO9 PWER_GPIO (9) /* GPIO [9] wake-up enable */
+#define PWER_GPIO10 PWER_GPIO (10) /* GPIO [10] wake-up enable */
+#define PWER_GPIO11 PWER_GPIO (11) /* GPIO [11] wake-up enable */
+#define PWER_GPIO12 PWER_GPIO (12) /* GPIO [12] wake-up enable */
+#define PWER_GPIO13 PWER_GPIO (13) /* GPIO [13] wake-up enable */
+#define PWER_GPIO14 PWER_GPIO (14) /* GPIO [14] wake-up enable */
+#define PWER_GPIO15 PWER_GPIO (15) /* GPIO [15] wake-up enable */
+#define PWER_RTC 0x80000000 /* RTC alarm wake-up enable */
+
/*
* SSP Serial Port Registers