wifipineapple-openwrt/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/targaddrs.h

159 lines
6.2 KiB
C
Raw Normal View History

/*
* Copyright (c) 2004-2007 Atheros Communications Inc.
* All rights reserved.
*
* $ATH_LICENSE_HOSTSDK0_C$
*
*/
#ifndef __TARGADDRS_H__
#define __TARGADDRS_H__
#if defined(AR6001)
#include "AR6001/addrs.h"
#endif
#if defined(AR6002)
#include "AR6002/addrs.h"
#endif
/*
* AR6K option bits, to enable/disable various features.
* By default, all option bits are 0.
* These bits can be set in LOCAL_SCRATCH register 0.
*/
#define AR6K_OPTION_BMI_DISABLE 0x01 /* Disable BMI comm with Host */
#define AR6K_OPTION_SERIAL_ENABLE 0x02 /* Enable serial port msgs */
#define AR6K_OPTION_WDT_DISABLE 0x04 /* WatchDog Timer override */
#define AR6K_OPTION_SLEEP_DISABLE 0x08 /* Disable system sleep */
#define AR6K_OPTION_STOP_BOOT 0x10 /* Stop boot processes (for ATE) */
#define AR6K_OPTION_ENABLE_NOANI 0x20 /* Operate without ANI */
#define AR6K_OPTION_DSET_DISABLE 0x40 /* Ignore DataSets */
#define AR6K_OPTION_IGNORE_FLASH 0x80 /* Ignore flash during bootup */
/*
* xxx_HOST_INTEREST_ADDRESS is the address in Target RAM of the
* host_interest structure. It must match the address of the _host_interest
* symbol (see linker script).
*
* Host Interest is shared between Host and Target in order to coordinate
* between the two, and is intended to remain constant (with additions only
* at the end) across software releases.
*/
#define AR6001_HOST_INTEREST_ADDRESS 0x80000600
#define AR6002_HOST_INTEREST_ADDRESS 0x00500400
#define HOST_INTEREST_MAX_SIZE 0x100
#if !defined(__ASSEMBLER__)
struct register_dump_s;
struct dbglog_hdr_s;
/*
* These are items that the Host may need to access
* via BMI or via the Diagnostic Window. The position
* of items in this structure must remain constant
* across firmware revisions!
*
* Types for each item must be fixed size across
* target and host platforms.
*
* More items may be added at the end.
*/
struct host_interest_s {
/*
* Pointer to application-defined area, if any.
* Set by Target application during startup.
*/
A_UINT32 hi_app_host_interest; /* 0x00 */
/* Pointer to register dump area, valid after Target crash. */
A_UINT32 hi_failure_state; /* 0x04 */
/* Pointer to debug logging header */
A_UINT32 hi_dbglog_hdr; /* 0x08 */
/* Indicates whether or not flash is present on Target.
* NB: flash_is_present indicator is here not just
* because it might be of interest to the Host; but
* also because it's set early on by Target's startup
* asm code and we need it to have a special RAM address
* so that it doesn't get reinitialized with the rest
* of data.
*/
A_UINT32 hi_flash_is_present; /* 0x0c */
/*
* General-purpose flag bits, similar to AR6000_OPTION_* flags.
* Can be used by application rather than by OS.
*/
A_UINT32 hi_option_flag; /* 0x10 */
/*
* Boolean that determines whether or not to
* display messages on the serial port.
*/
A_UINT32 hi_serial_enable; /* 0x14 */
/* Start address of Flash DataSet index, if any */
A_UINT32 hi_dset_list_head; /* 0x18 */
/* Override Target application start address */
A_UINT32 hi_app_start; /* 0x1c */
/* Clock and voltage tuning */
A_UINT32 hi_skip_clock_init; /* 0x20 */
A_UINT32 hi_core_clock_setting; /* 0x24 */
A_UINT32 hi_cpu_clock_setting; /* 0x28 */
A_UINT32 hi_system_sleep_setting; /* 0x2c */
A_UINT32 hi_xtal_control_setting; /* 0x30 */
A_UINT32 hi_pll_ctrl_setting_24ghz; /* 0x34 */
A_UINT32 hi_pll_ctrl_setting_5ghz; /* 0x38 */
A_UINT32 hi_ref_voltage_trim_setting; /* 0x3c */
A_UINT32 hi_clock_info; /* 0x40 */
/*
* Flash configuration overrides, used only
* when firmware is not executing from flash.
* (When using flash, modify the global variables
* with equivalent names.)
*/
A_UINT32 hi_bank0_addr_value; /* 0x44 */
A_UINT32 hi_bank0_read_value; /* 0x48 */
A_UINT32 hi_bank0_write_value; /* 0x4c */
A_UINT32 hi_bank0_config_value; /* 0x50 */
/* Pointer to Board Data */
A_UINT32 hi_board_data; /* 0x54 */
A_UINT32 hi_board_data_initialized; /* 0x58 */
A_UINT32 hi_dset_RAM_index_table; /* 0x5c */
A_UINT32 hi_desired_baud_rate; /* 0x60 */
A_UINT32 hi_dbglog_config; /* 0x64 */
A_UINT32 hi_end_RAM_reserve_sz; /* 0x68 */
A_UINT32 hi_mbox_io_block_sz; /* 0x6c */
A_UINT32 hi_num_bpatch_streams; /* 0x70 */
A_UINT32 hi_mbox_isr_yield_limit; /* 0x74 */
A_UINT32 hi_refclk_hz; /* 0x78 */
};
/* Bits defined in hi_option_flag */
#define HI_OPTION_TIMER_WAR 1 /* not really used */
/*
* Intended for use by Host software, this macro returns the Target RAM
* address of any item in the host_interest structure.
* Example: target_addr = AR6001_HOST_INTEREST_ITEM_ADDRESS(hi_board_data);
*/
#define AR6001_HOST_INTEREST_ITEM_ADDRESS(item) \
((A_UINT32)&((((struct host_interest_s *)(AR6001_HOST_INTEREST_ADDRESS))->item)))
#define AR6002_HOST_INTEREST_ITEM_ADDRESS(item) \
((A_UINT32)&((((struct host_interest_s *)(AR6002_HOST_INTEREST_ADDRESS))->item)))
#endif /* !__ASSEMBLER__ */
#endif /* __TARGADDRS_H__ */