wifipineapple-openwrt/target/linux/generic/patches-3.8/020-ssb_update.patch

366 lines
10 KiB
Diff
Raw Normal View History

--- a/drivers/ssb/Kconfig
+++ b/drivers/ssb/Kconfig
@@ -136,6 +136,11 @@ config SSB_DRIVER_MIPS
If unsure, say N
+config SSB_SFLASH
+ bool "SSB serial flash support"
+ depends on SSB_DRIVER_MIPS && BROKEN
+ default y
+
# Assumption: We are on embedded, if we compile the MIPS core.
config SSB_EMBEDDED
bool
--- a/drivers/ssb/Makefile
+++ b/drivers/ssb/Makefile
@@ -11,6 +11,7 @@ ssb-$(CONFIG_SSB_SDIOHOST) += sdio.o
# built-in drivers
ssb-y += driver_chipcommon.o
ssb-y += driver_chipcommon_pmu.o
+ssb-$(CONFIG_SSB_SFLASH) += driver_chipcommon_sflash.o
ssb-$(CONFIG_SSB_DRIVER_MIPS) += driver_mipscore.o
ssb-$(CONFIG_SSB_DRIVER_EXTIF) += driver_extif.o
ssb-$(CONFIG_SSB_DRIVER_PCICORE) += driver_pcicore.o
--- /dev/null
+++ b/drivers/ssb/driver_chipcommon_sflash.c
@@ -0,0 +1,140 @@
+/*
+ * Sonics Silicon Backplane
+ * ChipCommon serial flash interface
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include <linux/ssb/ssb.h>
+
+#include "ssb_private.h"
+
+struct ssb_sflash_tbl_e {
+ char *name;
+ u32 id;
+ u32 blocksize;
+ u16 numblocks;
+};
+
+static struct ssb_sflash_tbl_e ssb_sflash_st_tbl[] = {
+ { "M25P20", 0x11, 0x10000, 4, },
+ { "M25P40", 0x12, 0x10000, 8, },
+
+ { "M25P16", 0x14, 0x10000, 32, },
+ { "M25P32", 0x15, 0x10000, 64, },
+ { "M25P64", 0x16, 0x10000, 128, },
+ { "M25FL128", 0x17, 0x10000, 256, },
+ { 0 },
+};
+
+static struct ssb_sflash_tbl_e ssb_sflash_sst_tbl[] = {
+ { "SST25WF512", 1, 0x1000, 16, },
+ { "SST25VF512", 0x48, 0x1000, 16, },
+ { "SST25WF010", 2, 0x1000, 32, },
+ { "SST25VF010", 0x49, 0x1000, 32, },
+ { "SST25WF020", 3, 0x1000, 64, },
+ { "SST25VF020", 0x43, 0x1000, 64, },
+ { "SST25WF040", 4, 0x1000, 128, },
+ { "SST25VF040", 0x44, 0x1000, 128, },
+ { "SST25VF040B", 0x8d, 0x1000, 128, },
+ { "SST25WF080", 5, 0x1000, 256, },
+ { "SST25VF080B", 0x8e, 0x1000, 256, },
+ { "SST25VF016", 0x41, 0x1000, 512, },
+ { "SST25VF032", 0x4a, 0x1000, 1024, },
+ { "SST25VF064", 0x4b, 0x1000, 2048, },
+ { 0 },
+};
+
+static struct ssb_sflash_tbl_e ssb_sflash_at_tbl[] = {
+ { "AT45DB011", 0xc, 256, 512, },
+ { "AT45DB021", 0x14, 256, 1024, },
+ { "AT45DB041", 0x1c, 256, 2048, },
+ { "AT45DB081", 0x24, 256, 4096, },
+ { "AT45DB161", 0x2c, 512, 4096, },
+ { "AT45DB321", 0x34, 512, 8192, },
+ { "AT45DB642", 0x3c, 1024, 8192, },
+ { 0 },
+};
+
+static void ssb_sflash_cmd(struct ssb_chipcommon *cc, u32 opcode)
+{
+ int i;
+ chipco_write32(cc, SSB_CHIPCO_FLASHCTL,
+ SSB_CHIPCO_FLASHCTL_START | opcode);
+ for (i = 0; i < 1000; i++) {
+ if (!(chipco_read32(cc, SSB_CHIPCO_FLASHCTL) &
+ SSB_CHIPCO_FLASHCTL_BUSY))
+ return;
+ cpu_relax();
+ }
+ pr_err("SFLASH control command failed (timeout)!\n");
+}
+
+/* Initialize serial flash access */
+int ssb_sflash_init(struct ssb_chipcommon *cc)
+{
+ struct ssb_sflash_tbl_e *e;
+ u32 id, id2;
+
+ switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) {
+ case SSB_CHIPCO_FLASHT_STSER:
+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_DP);
+
+ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, 0);
+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_RES);
+ id = chipco_read32(cc, SSB_CHIPCO_FLASHDATA);
+
+ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, 1);
+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_RES);
+ id2 = chipco_read32(cc, SSB_CHIPCO_FLASHDATA);
+
+ switch (id) {
+ case 0xbf:
+ for (e = ssb_sflash_sst_tbl; e->name; e++) {
+ if (e->id == id2)
+ break;
+ }
+ break;
+ case 0x13:
+ return -ENOTSUPP;
+ default:
+ for (e = ssb_sflash_st_tbl; e->name; e++) {
+ if (e->id == id)
+ break;
+ }
+ break;
+ }
+ if (!e->name) {
+ pr_err("Unsupported ST serial flash (id: 0x%X, id2: 0x%X)\n",
+ id, id2);
+ return -ENOTSUPP;
+ }
+
+ break;
+ case SSB_CHIPCO_FLASHT_ATSER:
+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_STATUS);
+ id = chipco_read32(cc, SSB_CHIPCO_FLASHDATA) & 0x3c;
+
+ for (e = ssb_sflash_at_tbl; e->name; e++) {
+ if (e->id == id)
+ break;
+ }
+ if (!e->name) {
+ pr_err("Unsupported Atmel serial flash (id: 0x%X)\n",
+ id);
+ return -ENOTSUPP;
+ }
+
+ break;
+ default:
+ pr_err("Unsupported flash type\n");
+ return -ENOTSUPP;
+ }
+
+ pr_info("Found %s serial flash (blocksize: 0x%X, blocks: %d)\n",
+ e->name, e->blocksize, e->numblocks);
+
+ pr_err("Serial flash support is not implemented yet!\n");
+
+ return -ENOTSUPP;
+}
--- a/drivers/ssb/driver_gpio.c
+++ b/drivers/ssb/driver_gpio.c
@@ -74,6 +74,16 @@ static void ssb_gpio_chipco_free(struct
ssb_chipco_gpio_pullup(&bus->chipco, 1 << gpio, 0);
}
+static int ssb_gpio_chipco_to_irq(struct gpio_chip *chip, unsigned gpio)
+{
+ struct ssb_bus *bus = ssb_gpio_get_bus(chip);
+
+ if (bus->bustype == SSB_BUSTYPE_SSB)
+ return ssb_mips_irq(bus->chipco.dev) + 2;
+ else
+ return -EINVAL;
+}
+
static int ssb_gpio_chipco_init(struct ssb_bus *bus)
{
struct gpio_chip *chip = &bus->gpio;
@@ -86,6 +96,7 @@ static int ssb_gpio_chipco_init(struct s
chip->set = ssb_gpio_chipco_set_value;
chip->direction_input = ssb_gpio_chipco_direction_input;
chip->direction_output = ssb_gpio_chipco_direction_output;
+ chip->to_irq = ssb_gpio_chipco_to_irq;
chip->ngpio = 16;
/* There is just one SoC in one device and its GPIO addresses should be
* deterministic to address them more easily. The other buses could get
@@ -134,6 +145,16 @@ static int ssb_gpio_extif_direction_outp
return 0;
}
+static int ssb_gpio_extif_to_irq(struct gpio_chip *chip, unsigned gpio)
+{
+ struct ssb_bus *bus = ssb_gpio_get_bus(chip);
+
+ if (bus->bustype == SSB_BUSTYPE_SSB)
+ return ssb_mips_irq(bus->extif.dev) + 2;
+ else
+ return -EINVAL;
+}
+
static int ssb_gpio_extif_init(struct ssb_bus *bus)
{
struct gpio_chip *chip = &bus->gpio;
@@ -144,6 +165,7 @@ static int ssb_gpio_extif_init(struct ss
chip->set = ssb_gpio_extif_set_value;
chip->direction_input = ssb_gpio_extif_direction_input;
chip->direction_output = ssb_gpio_extif_direction_output;
+ chip->to_irq = ssb_gpio_extif_to_irq;
chip->ngpio = 5;
/* There is just one SoC in one device and its GPIO addresses should be
* deterministic to address them more easily. The other buses could get
--- a/drivers/ssb/driver_mipscore.c
+++ b/drivers/ssb/driver_mipscore.c
@@ -10,6 +10,7 @@
#include <linux/ssb/ssb.h>
+#include <linux/mtd/physmap.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
#include <linux/serial_reg.h>
@@ -17,6 +18,25 @@
#include "ssb_private.h"
+static const char *part_probes[] = { "bcm47xxpart", NULL };
+
+static struct physmap_flash_data ssb_pflash_data = {
+ .part_probe_types = part_probes,
+};
+
+static struct resource ssb_pflash_resource = {
+ .name = "ssb_pflash",
+ .flags = IORESOURCE_MEM,
+};
+
+struct platform_device ssb_pflash_dev = {
+ .name = "physmap-flash",
+ .dev = {
+ .platform_data = &ssb_pflash_data,
+ },
+ .resource = &ssb_pflash_resource,
+ .num_resources = 1,
+};
static inline u32 mips_read32(struct ssb_mipscore *mcore,
u16 offset)
@@ -189,34 +209,43 @@ static void ssb_mips_serial_init(struct
static void ssb_mips_flash_detect(struct ssb_mipscore *mcore)
{
struct ssb_bus *bus = mcore->dev->bus;
+ struct ssb_pflash *pflash = &mcore->pflash;
/* When there is no chipcommon on the bus there is 4MB flash */
if (!ssb_chipco_available(&bus->chipco)) {
- mcore->pflash.present = true;
- mcore->pflash.buswidth = 2;
- mcore->pflash.window = SSB_FLASH1;
- mcore->pflash.window_size = SSB_FLASH1_SZ;
- return;
+ pflash->present = true;
+ pflash->buswidth = 2;
+ pflash->window = SSB_FLASH1;
+ pflash->window_size = SSB_FLASH1_SZ;
+ goto ssb_pflash;
}
/* There is ChipCommon, so use it to read info about flash */
switch (bus->chipco.capabilities & SSB_CHIPCO_CAP_FLASHT) {
case SSB_CHIPCO_FLASHT_STSER:
case SSB_CHIPCO_FLASHT_ATSER:
- pr_err("Serial flash not supported\n");
+ pr_debug("Found serial flash\n");
+ ssb_sflash_init(&bus->chipco);
break;
case SSB_CHIPCO_FLASHT_PARA:
pr_debug("Found parallel flash\n");
- mcore->pflash.present = true;
- mcore->pflash.window = SSB_FLASH2;
- mcore->pflash.window_size = SSB_FLASH2_SZ;
+ pflash->present = true;
+ pflash->window = SSB_FLASH2;
+ pflash->window_size = SSB_FLASH2_SZ;
if ((ssb_read32(bus->chipco.dev, SSB_CHIPCO_FLASH_CFG)
& SSB_CHIPCO_CFG_DS16) == 0)
- mcore->pflash.buswidth = 1;
+ pflash->buswidth = 1;
else
- mcore->pflash.buswidth = 2;
+ pflash->buswidth = 2;
break;
}
+
+ssb_pflash:
+ if (pflash->present) {
+ ssb_pflash_data.width = pflash->buswidth;
+ ssb_pflash_resource.start = pflash->window;
+ ssb_pflash_resource.end = pflash->window + pflash->window_size;
+ }
}
u32 ssb_cpu_clock(struct ssb_mipscore *mcore)
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -549,6 +549,14 @@ static int ssb_devices_register(struct s
dev_idx++;
}
+#ifdef CONFIG_SSB_DRIVER_MIPS
+ if (bus->mipscore.pflash.present) {
+ err = platform_device_register(&ssb_pflash_dev);
+ if (err)
+ pr_err("Error registering parallel flash\n");
+ }
+#endif
+
return 0;
error:
/* Unwind the already registered devices. */
--- a/drivers/ssb/ssb_private.h
+++ b/drivers/ssb/ssb_private.h
@@ -217,6 +217,21 @@ extern u32 ssb_chipco_watchdog_timer_set
u32 ticks);
extern u32 ssb_chipco_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms);
+/* driver_chipcommon_sflash.c */
+#ifdef CONFIG_SSB_SFLASH
+int ssb_sflash_init(struct ssb_chipcommon *cc);
+#else
+static inline int ssb_sflash_init(struct ssb_chipcommon *cc)
+{
+ pr_err("Serial flash not supported\n");
+ return 0;
+}
+#endif /* CONFIG_SSB_SFLASH */
+
+#ifdef CONFIG_SSB_DRIVER_MIPS
+extern struct platform_device ssb_pflash_dev;
+#endif
+
#ifdef CONFIG_SSB_DRIVER_EXTIF
extern u32 ssb_extif_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt, u32 ticks);
extern u32 ssb_extif_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms);
--- a/include/linux/ssb/ssb_driver_mips.h
+++ b/include/linux/ssb/ssb_driver_mips.h
@@ -45,6 +45,11 @@ void ssb_mipscore_init(struct ssb_mipsco
{
}
+static inline unsigned int ssb_mips_irq(struct ssb_device *dev)
+{
+ return 0;
+}
+
#endif /* CONFIG_SSB_DRIVER_MIPS */
#endif /* LINUX_SSB_MIPSCORE_H_ */