wifipineapple-openwrt/target/linux/ramips/dts/WL-351.dts

108 lines
1.9 KiB
Plaintext
Raw Normal View History

/dts-v1/;
/include/ "rt3050.dtsi"
/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "WL-351", "ralink,rt3052-soc";
model = "Sitecom WL-351 v1 002";
memorydetect {
ralink,memory = <0x0 0x200000 0x4000000>;
};
chosen {
bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3776k@0x50000(firmware)";
};
palmbus@10000000 {
sysc@0 {
ralink,pinmmux = "uartlite", "jtag", "sdram", "rgmii";
ralink,gpiomux = "i2c", "spi", "mdio";
ralink,uartmux = "gpio";
ralink,wdtmux = <1>;
};
gpio0: gpio@600 {
status = "okay";
};
};
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
};
ethernet@10100000 {
status = "okay";
};
esw@10110000 {
status = "okay";
ralink,portmap = <0x3f>;
ralink,fct2 = <0x0002500c>;
/*
* ext phy base addr 31, rx/tx clock skew 0,
* turbo mii off, rgmi 3.3v off, port 5 polling off
* port5: enabled, gige, full-duplex, rx/tx-flow-control
* port6: enabled, gige, full-duplex, rx/tx-flow-control
*/
ralink,fpa2 = <0x1f003fff>;
};
wmac@10180000 {
status = "okay";
};
otg@101c0000 {
status = "okay";
};
gpio-leds {
compatible = "gpio-leds";
power {
label = "wl-351:amber:power";
gpio = <&gpio0 8 1>;
};
unpopulated {
label = "wl-351:amber:unpopulated";
gpio = <&gpio0 12 1>;
};
unpopulated2 {
label = "wl-351:blue:unpopulated";
gpio = <&gpio0 13 1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpio = <&gpio0 10 1>;
linux,code = <0x198>;
};
wps {
label = "wps";
gpio = <&gpio0 0 1>;
linux,code = <0x211>;
};
};
rtl8366rb {
compatible = "rtl8367rb";
gpio-sda = <&gpio0 1 0>;
gpio-sck = <&gpio0 2 0>;
};
};