wifipineapple-openwrt/target/linux/omap/patches-3.12/415-ASoC-davinci-mcasp-Remove-redundant-num-serializer-D.patch

From fdb8d3521ecae71865df66a84a1cbe13f7daa6f5 Mon Sep 17 00:00:00 2001
From: Peter Ujfalusi <peter.ujfalusi@ti.com>
Date: Mon, 23 Sep 2013 11:25:02 +0300
Subject: [PATCH 226/752] ASoC: davinci: mcasp: Remove redundant
 num-serializer DT parameter

The serial-dir array gives this information so there is no need to have the
num-serializer property in DT description.
Just ignore the property in the driver the DTS files can be updated
separately without regression.
Update the documentation at the same time for davinci-mcasp

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 .../bindings/sound/davinci-mcasp-audio.txt         |    8 +++----
 sound/soc/davinci/davinci-mcasp.c                  |   22 +++++---------------
 2 files changed, 8 insertions(+), 22 deletions(-)

--- a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt
+++ b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt
@@ -13,10 +13,9 @@ Required properties:
 	      good to keep "mpu" first in the list.
 - op-mode : I2S/DIT ops mode.
 - tdm-slots : Slots for TDM operation.
-- num-serializer : Serializers used by McASP.
-- serial-dir : A list of serializer pin mode. The list number should be equal
-		to "num-serializer" parameter. Each entry is a number indication
-		serializer pin direction. (0 - INACTIVE, 1 - TX, 2 - RX)
+- serial-dir : A list of serializer configuration. Each entry is a number
+               indication serializer pin direction.
+               (0 - INACTIVE, 1 - TX, 2 - RX)
 - dmas: two element list of DMA controller phandles and DMA request line
         ordered pairs.
 - dma-names: identifier string for each DMA request line in the dmas property.
@@ -45,7 +44,6 @@ mcasp0: mcasp0@1d00000 {
 	interrupts-names = "tx", "rx";
 	op-mode = <0>;		/* MCASP_IIS_MODE */
 	tdm-slots = <2>;
-	num-serializer = <16>;
 	serial-dir = <
 			0 0 0 0	/* 0: INACTIVE, 1: TX, 2: RX */
 			0 0 0 0
--- a/sound/soc/davinci/davinci-mcasp.c
+++ b/sound/soc/davinci/davinci-mcasp.c
@@ -1050,7 +1050,6 @@ static struct snd_platform_data *davinci
 	struct of_phandle_args dma_spec;
 
 	const u32 *of_serial_dir32;
-	u8 *of_serial_dir;
 	u32 val;
 	int i, ret = 0;
 
@@ -1081,32 +1080,21 @@ static struct snd_platform_data *davinci
 		pdata->tdm_slots = val;
 	}
 
-	ret = of_property_read_u32(np, "num-serializer", &val);
-	if (ret >= 0)
-		pdata->num_serializer = val;
-
 	of_serial_dir32 = of_get_property(np, "serial-dir", &val);
 	val /= sizeof(u32);
-	if (val != pdata->num_serializer) {
-		dev_err(&pdev->dev,
-				"num-serializer(%d) != serial-dir size(%d)\n",
-				pdata->num_serializer, val);
-		ret = -EINVAL;
-		goto nodata;
-	}
-
 	if (of_serial_dir32) {
-		of_serial_dir = devm_kzalloc(&pdev->dev,
-						(sizeof(*of_serial_dir) * val),
-						GFP_KERNEL);
+		u8 *of_serial_dir = devm_kzalloc(&pdev->dev,
+						 (sizeof(*of_serial_dir) * val),
+						 GFP_KERNEL);
 		if (!of_serial_dir) {
 			ret = -ENOMEM;
 			goto nodata;
 		}
 
-		for (i = 0; i < pdata->num_serializer; i++)
+		for (i = 0; i < val; i++)
 			of_serial_dir[i] = be32_to_cpup(&of_serial_dir32[i]);
 
+		pdata->num_serializer = val;
 		pdata->serial_dir = of_serial_dir;
 	}