wifipineapple-openwrt/target/linux/ixp4xx/patches-3.3/150-lanready_ap1000_support...

203 lines
5.3 KiB
Diff
Raw Normal View History

--- /dev/null
+++ b/arch/arm/mach-ixp4xx/ap1000-setup.c
@@ -0,0 +1,153 @@
+/*
+ * arch/arm/mach-ixp4xx/ap1000-setup.c
+ *
+ * Lanready AP-1000
+ *
+ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
+ *
+ * based on ixdp425-setup.c:
+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
+ *
+ * Author: Imre Kaloz <Kaloz@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/serial_8250.h>
+#include <linux/slab.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+
+static struct flash_platform_data ap1000_flash_data = {
+ .map_name = "cfi_probe",
+ .width = 2,
+};
+
+static struct resource ap1000_flash_resource = {
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device ap1000_flash = {
+ .name = "IXP4XX-Flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &ap1000_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &ap1000_flash_resource,
+};
+
+static struct resource ap1000_uart_resources[] = {
+ {
+ .start = IXP4XX_UART1_BASE_PHYS,
+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM
+ },
+ {
+ .start = IXP4XX_UART2_BASE_PHYS,
+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM
+ }
+};
+
+static struct plat_serial8250_port ap1000_uart_data[] = {
+ {
+ .mapbase = IXP4XX_UART1_BASE_PHYS,
+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
+ .irq = IRQ_IXP4XX_UART1,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = IXP4XX_UART_XTAL,
+ },
+ {
+ .mapbase = IXP4XX_UART2_BASE_PHYS,
+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
+ .irq = IRQ_IXP4XX_UART2,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = IXP4XX_UART_XTAL,
+ },
+ { },
+};
+
+static struct platform_device ap1000_uart = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev.platform_data = ap1000_uart_data,
+ .num_resources = 2,
+ .resource = ap1000_uart_resources
+};
+
+static struct platform_device *ap1000_devices[] __initdata = {
+ &ap1000_flash,
+ &ap1000_uart
+};
+
+static char ap1000_mem_fixup[] __initdata = "mem=64M ";
+
+static void __init ap1000_fixup(struct machine_desc *desc,
+ struct tag *tags, char **cmdline, struct meminfo *mi)
+
+{
+ struct tag *t = tags;
+ char *p = *cmdline;
+
+ /* Find the end of the tags table, taking note of any cmdline tag. */
+ for (; t->hdr.size; t = tag_next(t)) {
+ if (t->hdr.tag == ATAG_CMDLINE) {
+ p = t->u.cmdline.cmdline;
+ }
+ }
+
+ /* Overwrite the end of the table with a new cmdline tag. */
+ t->hdr.tag = ATAG_CMDLINE;
+ t->hdr.size = (sizeof (struct tag_header) +
+ strlen(ap1000_mem_fixup) + strlen(p) + 1 + 4) >> 2;
+ strlcpy(t->u.cmdline.cmdline, ap1000_mem_fixup, COMMAND_LINE_SIZE);
+ strlcpy(t->u.cmdline.cmdline + strlen(ap1000_mem_fixup), p,
+ COMMAND_LINE_SIZE - strlen(ap1000_mem_fixup));
+
+ /* Terminate the table. */
+ t = tag_next(t);
+ t->hdr.tag = ATAG_NONE;
+ t->hdr.size = 0;
+}
+
+static void __init ap1000_init(void)
+{
+ ixp4xx_sys_init();
+
+ ap1000_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+ ap1000_flash_resource.end =
+ IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
+
+ platform_add_devices(ap1000_devices, ARRAY_SIZE(ap1000_devices));
+}
+
+#ifdef CONFIG_MACH_AP1000
+MACHINE_START(AP1000, "Lanready AP-1000")
+ /* Maintainer: Imre Kaloz <Kaloz@openwrt.org> */
+ .fixup = ap1000_fixup,
+ .map_io = ixp4xx_map_io,
+ .init_irq = ixp4xx_init_irq,
+ .timer = &ixp4xx_timer,
+ .atag_offset = 0x0100,
+ .init_machine = ap1000_init,
+#if defined(CONFIG_PCI)
+ .dma_zone_size = SZ_64M,
+#endif
+ .restart = ixp4xx_restart,
+MACHINE_END
+#endif
--- a/arch/arm/mach-ixp4xx/ixdp425-pci.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c
@@ -71,7 +71,7 @@ int __init ixdp425_pci_init(void)
{
if (machine_is_ixdp425() || machine_is_ixcdp1100() ||
machine_is_ixdp465() || machine_is_kixrp435() ||
- machine_is_compex())
+ machine_is_compex() || machine_is_ap1000())
pci_common_init(&ixdp425_pci);
return 0;
}
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -105,6 +105,14 @@ config MACH_WRT300NV2
WRT300N v2 router. For more information on this
platform, see http://openwrt.org
+config MACH_AP1000
+ bool "Lanready AP-1000"
+ select PCI
+ help
+ Say 'Y' here if you want your kernel to support Lanready's
+ AP1000 board. For more information on this
+ platform, see http://openwrt.org
+
config ARCH_IXDP425
bool "IXDP425"
help
--- a/arch/arm/mach-ixp4xx/Makefile
+++ b/arch/arm/mach-ixp4xx/Makefile
@@ -23,6 +23,7 @@ obj-pci-$(CONFIG_MACH_PRONGHORN) += pron
obj-pci-$(CONFIG_MACH_SIDEWINDER) += sidewinder-pci.o
obj-pci-$(CONFIG_MACH_COMPEX) += ixdp425-pci.o
obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o
+obj-pci-$(CONFIG_MACH_AP1000) += ixdp425-pci.o
obj-y += common.o
@@ -47,6 +48,7 @@ obj-$(CONFIG_MACH_PRONGHORN) += pronghor
obj-$(CONFIG_MACH_SIDEWINDER) += sidewinder-setup.o
obj-$(CONFIG_MACH_COMPEX) += compex-setup.o
obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o
+obj-$(CONFIG_MACH_AP1000) += ap1000-setup.o
obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o