wifipineapple-openwrt/target/linux/ramips/dts/rt3883.dtsi

/ {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "ralink,rt3883-soc";

	cpus {
		cpu@0 {
			compatible = "mips,mips74Kc";
		};
	};

	chosen {
		bootargs = "console=ttyS0,57600";
	};

	aliases {
		spi0 = &spi0;
	};

	cpuintc: cpuintc@0 {
		#address-cells = <0>;
		#interrupt-cells = <1>;
		interrupt-controller;
		compatible = "mti,cpu-interrupt-controller";
	};

	palmbus@10000000 {
		compatible = "palmbus";
		reg = <0x10000000 0x200000>;
		ranges = <0x0 0x10000000 0x1FFFFF>;

		#address-cells = <1>;
		#size-cells = <1>;

		sysc@0 {
			compatible = "ralink,rt3883-sysc", "ralink,rt3050-sysc";
			reg = <0x0 0x100>;
		};

		timer@100 {
			compatible = "ralink,rt3883-timer", "ralink,rt2880-timer";
			reg = <0x100 0x20>;

			interrupt-parent = <&intc>;
			interrupts = <1>;
		};

		watchdog@120 {
			compatible = "ralink,rt3883-wdt", "ralink,rt2880-wdt";
			reg = <0x120 0x10>;
		};

		intc: intc@200 {
			compatible = "ralink,rt3883-intc", "ralink,rt2880-intc";
			reg = <0x200 0x100>;

			interrupt-controller;
			#interrupt-cells = <1>;

			interrupt-parent = <&cpuintc>;
			interrupts = <2>;
		};

		memc@300 {
			compatible = "ralink,rt3883-memc", "ralink,rt3050-memc";
			reg = <0x300 0x100>;
		};

		gpio0: gpio@600 {
			compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio";
			reg = <0x600 0x34>;

			gpio-controller;
			#gpio-cells = <2>;

			ralink,num-gpios = <24>;
			ralink,register-map = [ 00 04 08 0c
						20 24 28 2c
						30 34 ];

			status = "disabled";
		};

		gpio1: gpio@638 {
			compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio";
			reg = <0x638 0x24>;

			gpio-controller;
			#gpio-cells = <2>;

			ralink,num-gpios = <16>;
			ralink,register-map = [ 00 04 08 0c
						10 14 18 1c
						20 24 ];

			status = "disabled";
		};

		gpio2: gpio@660 {
			compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio";
			reg = <0x660 0x24>;

			gpio-controller;
			#gpio-cells = <2>;

			ralink,num-gpios = <32>;
			ralink,register-map = [ 00 04 08 0c
						10 14 18 1c
						20 24 ];

			status = "disabled";
		};

		gpio3: gpio@688 {
			compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio";
			reg = <0x688 0x24>;

			gpio-controller;
			#gpio-cells = <2>;

			ralink,num-gpios = <24>;
			ralink,register-map = [ 00 04 08 0c
						10 14 18 1c
						20 24 ];

			status = "disabled";
		};

		spi0: spi@b00 {
			compatible = "ralink,rt3883-spi", "ralink,rt2880-spi";
			reg = <0xb00 0x100>;
			#address-cells = <1>;
			#size-cells = <0>;

			status = "disabled";
		};

		uartlite@c00 {
			compatible = "ralink,rt3883-uart", "ralink,rt2880-uart", "ns16550a";
			reg = <0xc00 0x100>;

			interrupt-parent = <&intc>;
			interrupts = <12>;

			reg-shift = <2>;
		};
	};

	ethernet@10100000 {
		compatible = "ralink,rt3883-eth";
		reg = <0x10100000 10000>;

		interrupt-parent = <&cpuintc>;
		interrupts = <5>;

		status = "disabled";
	};

	wmac@10180000 {
		compatible = "ralink,rt3883-wmac", "ralink,rt2880-wmac";
		reg = <0x10180000 40000>;

		interrupt-parent = <&cpuintc>;
		interrupts = <6>;

		ralink,eeprom = "soc_wmac.eeprom"; 

		status = "disabled";
	};

	ehci@101c0000 {
		compatible = "ralink,rt3883-ehci", "ehci-platform";
		reg = <0x101c0000 0x1000>;

		interrupt-parent = <&intc>;
		interrupts = <18>;

		status = "disabled";
	};

	ohci@101c1000 {
		compatible = "ralink,rt3883-ohci", "ohci-platform";
		reg = <0x101c1000 0x1000>;

		interrupt-parent = <&intc>;
		interrupts = <18>;

		status = "disabled";
	};
};