wifipineapple-openwrt/tools/firmware-utils/Makefile

82 lines
2.0 KiB
Makefile
Raw Normal View History

#
# Copyright (C) 2006-2012 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
PKG_NAME := firmware-utils
include $(INCLUDE_DIR)/host-build.mk
include $(INCLUDE_DIR)/kernel.mk
define cc
$(HOSTCC) $(HOST_CFLAGS) -include endian.h $(HOST_STATIC_LINKING) $(HOST_LDFLAGS) -o $(HOST_BUILD_DIR)/bin/$(firstword $(1)) $(foreach src,$(1),src/$(src).c) $(2)
endef
define Host/Compile
mkdir -p $(HOST_BUILD_DIR)/bin
$(call cc,addpattern)
$(call cc,trx)
$(call cc,motorola-bin)
$(call cc,dgfirmware)
$(call cc,mksenaofw md5)
$(call cc,trx2usr)
$(call cc,ptgen)
$(call cc,airlink)
$(call cc,srec2bin)
$(call cc,mkmylofw)
$(call cc,mkcsysimg)
$(call cc,mkzynfw)
$(call cc,lzma2eva,-lz)
$(call cc,mkcasfw)
$(call cc,mkfwimage,-lz)
$(call cc,mkfwimage2,-lz)
$(call cc,imagetag imagetag_cmdline)
$(call cc,add_header)
$(call cc,makeamitbin)
$(call cc,encode_crc)
$(call cc,nand_ecc)
$(call cc,mkplanexfw sha1)
$(call cc,mktplinkfw md5)
$(call cc,mktplinkfw2 md5)
$(call cc,tplink-safeloader md5, -Wall)
$(call cc,pc1crypt)
$(call cc,osbridge-crc)
$(call cc,wrt400n cyg_crc32)
$(call cc,mkdniimg)
$(call cc,mktitanimg)
$(call cc,mkchkimg)
$(call cc,mkzcfw cyg_crc32)
$(call cc,spw303v)
$(call cc,zyxbcm)
$(call cc,trx2edips)
$(call cc,xorimage)
$(call cc,buffalo-enc buffalo-lib, -Wall)
$(call cc,buffalo-tag buffalo-lib, -Wall)
$(call cc,buffalo-tftp buffalo-lib, -Wall)
$(call cc,mkwrgimg md5, -Wall)
$(call cc,mkedimaximg)
$(call cc,mkbrncmdline)
$(call cc,mkbrnimg)
$(call cc,mkdapimg)
$(call cc, mkcameofw, -Wall)
$(call cc,seama md5)
$(call cc,fix-u-media-header cyg_crc32,-Wall)
$(call cc,hcsmakeimage bcmalgo)
$(call cc,mkporayfw, -Wall)
$(call cc,mkhilinkfw, -lcrypto)
$(call cc,mkdcs932, -Wall)
$(call cc,mkheader_gemtek,-lz)
$(call cc,mkrtn56uimg, -lz)
lantiq: DGN3500 (all known variants) factory and sysupgrade image building support This patch adds factory image building for the DGN3500, all variants, and fixes sysupgrade images to make them play nice with the sercomm secondary boot loader. The factory images can be used directly in the update dialog in the interface of the stock firmware and via the special Sercomm bootmode and a special windows flashing utility (allegedly present in the CD that came with the device -- but it's also compatible with the NSLU2 Upgrade_207_XP utility.) The special bootmode can be activated by turning the device on while holding the reset button pressed, then releasing it when the power led starts blinking red and green. Please notice that if using the 207 utility, it will always report that the flashing failed even though it completed successfully. Just power cycle the router manually after the utility reports the failure and OpenWRT will boot. This same utility (despite reporting failure in this case too) can revert a DGN3500 (any variant) to the appropriate stock Netgear firmware. This patch is a heavily modified version of a package I found on the OpenWRT forum with a couple fixes and features added -- mainly the generation of all the different image variants to support all known models directly, atm known variants are AnnexA-WW, AnnexA-NA and AnnexB-DE/GR. I tested the patch successfully on my device. Signed-off-by: Marco Antonio Mauro <marcus90@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41236 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-06-17 15:38:54 +00:00
$(call cc,dgn3500sum)
$(call cc,edimax_fw_header, -Wall)
endef
define Host/Install
$(INSTALL_BIN) $(HOST_BUILD_DIR)/bin/* $(STAGING_DIR_HOST)/bin/
endef
$(eval $(call HostBuild))