openwrt/target/linux/s3c24xx/patches-2.6.30/011-s3c-pwm.patch

803 lines
19 KiB
Diff

--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/pwm.h
@@ -0,0 +1,45 @@
+#ifndef __S3C2410_PWM_H
+#define __S3C2410_PWM_H
+
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+
+#include <mach/io.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <plat/regs-timer.h>
+
+enum pwm_timer {
+ PWM0,
+ PWM1,
+ PWM2,
+ PWM3,
+ PWM4
+};
+
+struct s3c2410_pwm {
+ enum pwm_timer timerid;
+ struct clk *pclk;
+ unsigned long pclk_rate;
+ unsigned long prescaler;
+ unsigned long divider;
+ unsigned long counter;
+ unsigned long comparer;
+};
+
+struct s3c24xx_pwm_platform_data{
+ /* callback to attach platform children (to enforce suspend / resume
+ * ordering */
+ void (*attach_child_devices)(struct device *parent_device);
+};
+
+int s3c2410_pwm_init(struct s3c2410_pwm *s3c2410_pwm);
+int s3c2410_pwm_enable(struct s3c2410_pwm *s3c2410_pwm);
+int s3c2410_pwm_disable(struct s3c2410_pwm *s3c2410_pwm);
+int s3c2410_pwm_start(struct s3c2410_pwm *s3c2410_pwm);
+int s3c2410_pwm_stop(struct s3c2410_pwm *s3c2410_pwm);
+int s3c2410_pwm_duty_cycle(int reg_value, struct s3c2410_pwm *s3c2410_pwm);
+int s3c2410_pwm_dumpregs(void);
+
+#endif /* __S3C2410_PWM_H */
--- a/arch/arm/plat-s3c/Kconfig
+++ b/arch/arm/plat-s3c/Kconfig
@@ -157,6 +157,11 @@ config S3C_DMA
help
Internal configuration for S3C DMA core
+config S3C_PWM
+ bool
+ help
+ PWM timer code for the S3C2410, and similar processors
+
# device definitions to compile in
config S3C_DEV_HSMMC
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -35,5 +35,6 @@ obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmm
obj-y += dev-i2c0.o
obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o
obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o
+obj-$(CONFIG_S3C_PWM) += pwm.o
obj-$(CONFIG_S3C_DMA) += dma.o
--- /dev/null
+++ b/arch/arm/plat-s3c/pwm.c
@@ -0,0 +1,288 @@
+/*
+ * arch/arm/plat-s3c/pwm.c
+ *
+ * Copyright (c) by Javi Roman <javiroman@kernel-labs.org>
+ * for the Openmoko Project.
+ *
+ * S3C2410A SoC PWM support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <mach/hardware.h>
+#include <plat/regs-timer.h>
+#include <plat/pwm.h>
+#include <asm/io.h>
+
+#ifdef CONFIG_PM
+ static unsigned long standby_reg_tcon;
+ static unsigned long standby_reg_tcfg0;
+ static unsigned long standby_reg_tcfg1;
+#endif
+
+int s3c2410_pwm_disable(struct s3c2410_pwm *pwm)
+{
+ unsigned long tcon;
+
+ /* stop timer */
+ tcon = __raw_readl(S3C2410_TCON);
+ tcon &= 0xffffff00;
+ __raw_writel(tcon, S3C2410_TCON);
+
+ clk_disable(pwm->pclk);
+ clk_put(pwm->pclk);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(s3c2410_pwm_disable);
+
+int s3c2410_pwm_init(struct s3c2410_pwm *pwm)
+{
+ pwm->pclk = clk_get(NULL, "timers");
+ if (IS_ERR(pwm->pclk))
+ return PTR_ERR(pwm->pclk);
+
+ clk_enable(pwm->pclk);
+ pwm->pclk_rate = clk_get_rate(pwm->pclk);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(s3c2410_pwm_init);
+
+int s3c2410_pwm_enable(struct s3c2410_pwm *pwm)
+{
+ unsigned long tcfg0, tcfg1, tcnt, tcmp;
+
+ /* control registers bits */
+ tcfg1 = __raw_readl(S3C2410_TCFG1);
+ tcfg0 = __raw_readl(S3C2410_TCFG0);
+
+ /* divider & scaler slection */
+ switch (pwm->timerid) {
+ case PWM0:
+ tcfg1 &= ~S3C2410_TCFG1_MUX0_MASK;
+ tcfg0 &= ~S3C2410_TCFG_PRESCALER0_MASK;
+ break;
+ case PWM1:
+ tcfg1 &= ~S3C2410_TCFG1_MUX1_MASK;
+ tcfg0 &= ~S3C2410_TCFG_PRESCALER0_MASK;
+ break;
+ case PWM2:
+ tcfg1 &= ~S3C2410_TCFG1_MUX2_MASK;
+ tcfg0 &= ~S3C2410_TCFG_PRESCALER1_MASK;
+ break;
+ case PWM3:
+ tcfg1 &= ~S3C2410_TCFG1_MUX3_MASK;
+ tcfg0 &= ~S3C2410_TCFG_PRESCALER1_MASK;
+ break;
+ case PWM4:
+ /* timer four is not capable of doing PWM */
+ break;
+ default:
+ clk_disable(pwm->pclk);
+ clk_put(pwm->pclk);
+ return -1;
+ }
+
+ /* divider & scaler values */
+ tcfg1 |= pwm->divider;
+ __raw_writel(tcfg1, S3C2410_TCFG1);
+
+ switch (pwm->timerid) {
+ case PWM0:
+ case PWM1:
+ tcfg0 |= pwm->prescaler;
+ __raw_writel(tcfg0, S3C2410_TCFG0);
+ break;
+ default:
+ if ((tcfg0 | pwm->prescaler) != tcfg0) {
+ printk(KERN_WARNING "not changing prescaler of PWM %u,"
+ " since it's shared with timer4 (clock tick)\n",
+ pwm->timerid);
+ }
+ break;
+ }
+
+ /* timer count and compare buffer initial values */
+ tcnt = pwm->counter;
+ tcmp = pwm->comparer;
+
+ __raw_writel(tcnt, S3C2410_TCNTB(pwm->timerid));
+ __raw_writel(tcmp, S3C2410_TCMPB(pwm->timerid));
+
+ /* ensure timer is stopped */
+ s3c2410_pwm_stop(pwm);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(s3c2410_pwm_enable);
+
+int s3c2410_pwm_start(struct s3c2410_pwm *pwm)
+{
+ unsigned long tcon;
+
+ tcon = __raw_readl(S3C2410_TCON);
+
+ switch (pwm->timerid) {
+ case PWM0:
+ tcon |= S3C2410_TCON_T0START;
+ tcon &= ~S3C2410_TCON_T0MANUALUPD;
+ break;
+ case PWM1:
+ tcon |= S3C2410_TCON_T1START;
+ tcon &= ~S3C2410_TCON_T1MANUALUPD;
+ break;
+ case PWM2:
+ tcon |= S3C2410_TCON_T2START;
+ tcon &= ~S3C2410_TCON_T2MANUALUPD;
+ break;
+ case PWM3:
+ tcon |= S3C2410_TCON_T3START;
+ tcon &= ~S3C2410_TCON_T3MANUALUPD;
+ break;
+ case PWM4:
+ /* timer four is not capable of doing PWM */
+ default:
+ return -ENODEV;
+ }
+
+ __raw_writel(tcon, S3C2410_TCON);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(s3c2410_pwm_start);
+
+int s3c2410_pwm_stop(struct s3c2410_pwm *pwm)
+{
+ unsigned long tcon;
+
+ tcon = __raw_readl(S3C2410_TCON);
+
+ switch (pwm->timerid) {
+ case PWM0:
+ tcon &= ~0x00000000;
+ tcon |= S3C2410_TCON_T0RELOAD;
+ tcon |= S3C2410_TCON_T0MANUALUPD;
+ break;
+ case PWM1:
+ tcon &= ~0x00000080;
+ tcon |= S3C2410_TCON_T1RELOAD;
+ tcon |= S3C2410_TCON_T1MANUALUPD;
+ break;
+ case PWM2:
+ tcon &= ~0x00000800;
+ tcon |= S3C2410_TCON_T2RELOAD;
+ tcon |= S3C2410_TCON_T2MANUALUPD;
+ break;
+ case PWM3:
+ tcon &= ~0x00008000;
+ tcon |= S3C2410_TCON_T3RELOAD;
+ tcon |= S3C2410_TCON_T3MANUALUPD;
+ break;
+ case PWM4:
+ /* timer four is not capable of doing PWM */
+ default:
+ return -ENODEV;
+ }
+
+ __raw_writel(tcon, S3C2410_TCON);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(s3c2410_pwm_stop);
+
+int s3c2410_pwm_duty_cycle(int reg_value, struct s3c2410_pwm *pwm)
+{
+ __raw_writel(reg_value, S3C2410_TCMPB(pwm->timerid));
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(s3c2410_pwm_duty_cycle);
+
+int s3c2410_pwm_dumpregs(void)
+{
+ printk(KERN_INFO "TCON: %08lx, TCFG0: %08lx, TCFG1: %08lx\n",
+ (unsigned long) __raw_readl(S3C2410_TCON),
+ (unsigned long) __raw_readl(S3C2410_TCFG0),
+ (unsigned long) __raw_readl(S3C2410_TCFG1));
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(s3c2410_pwm_dumpregs);
+
+static int __init s3c24xx_pwm_probe(struct platform_device *pdev)
+{
+ struct s3c24xx_pwm_platform_data *pdata = pdev->dev.platform_data;
+
+ dev_info(&pdev->dev, "s3c24xx_pwm is registered \n");
+
+ /* if platform was interested, give him a chance to register
+ * platform devices that switch power with us as the parent
+ * at registration time -- ensures suspend / resume ordering
+ */
+ if (pdata)
+ if (pdata->attach_child_devices)
+ (pdata->attach_child_devices)(&pdev->dev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int s3c24xx_pwm_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ /* PWM config should be kept in suspending */
+ standby_reg_tcon = __raw_readl(S3C2410_TCON);
+ standby_reg_tcfg0 = __raw_readl(S3C2410_TCFG0);
+ standby_reg_tcfg1 = __raw_readl(S3C2410_TCFG1);
+
+ return 0;
+}
+
+static int s3c24xx_pwm_resume(struct platform_device *pdev)
+{
+ __raw_writel(standby_reg_tcon, S3C2410_TCON);
+ __raw_writel(standby_reg_tcfg0, S3C2410_TCFG0);
+ __raw_writel(standby_reg_tcfg1, S3C2410_TCFG1);
+
+ return 0;
+}
+#else
+#define s3c24xx_pwm_suspend NULL
+#define s3c24xx_pwm_resume NULL
+#endif
+
+static struct platform_driver s3c24xx_pwm_driver = {
+ .driver = {
+ .name = "s3c24xx_pwm",
+ .owner = THIS_MODULE,
+ },
+ .probe = s3c24xx_pwm_probe,
+ .suspend = s3c24xx_pwm_suspend,
+ .resume = s3c24xx_pwm_resume,
+};
+
+static int __init s3c24xx_pwm_init(void)
+{
+ return platform_driver_register(&s3c24xx_pwm_driver);
+}
+
+static void __exit s3c24xx_pwm_exit(void)
+{
+}
+
+MODULE_AUTHOR("Javi Roman <javiroman@kernel-labs.org>");
+MODULE_LICENSE("GPL");
+
+module_init(s3c24xx_pwm_init);
+module_exit(s3c24xx_pwm_exit);
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/pwm-clock.c
@@ -0,0 +1,437 @@
+/* linux/arch/arm/plat-s3c24xx/pwm-clock.c
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ * Copyright (c) 2007, 2008 Ben Dooks
+ * Ben Dooks <ben-linux@fluff.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/cpu.h>
+
+#include <asm/plat-s3c/regs-timer.h>
+
+/* Each of the timers 0 through 5 go through the following
+ * clock tree, with the inputs depending on the timers.
+ *
+ * pclk ---- [ prescaler 0 ] -+---> timer 0
+ * +---> timer 1
+ *
+ * pclk ---- [ prescaler 1 ] -+---> timer 2
+ * +---> timer 3
+ * \---> timer 4
+ *
+ * Which are fed into the timers as so:
+ *
+ * prescaled 0 ---- [ div 2,4,8,16 ] ---\
+ * [mux] -> timer 0
+ * tclk 0 ------------------------------/
+ *
+ * prescaled 0 ---- [ div 2,4,8,16 ] ---\
+ * [mux] -> timer 1
+ * tclk 0 ------------------------------/
+ *
+ *
+ * prescaled 1 ---- [ div 2,4,8,16 ] ---\
+ * [mux] -> timer 2
+ * tclk 1 ------------------------------/
+ *
+ * prescaled 1 ---- [ div 2,4,8,16 ] ---\
+ * [mux] -> timer 3
+ * tclk 1 ------------------------------/
+ *
+ * prescaled 1 ---- [ div 2,4,8, 16 ] --\
+ * [mux] -> timer 4
+ * tclk 1 ------------------------------/
+ *
+ * Since the mux and the divider are tied together in the
+ * same register space, it is impossible to set the parent
+ * and the rate at the same time. To avoid this, we add an
+ * intermediate 'prescaled-and-divided' clock to select
+ * as the parent for the timer input clock called tdiv.
+ *
+ * prescaled clk --> pwm-tdiv ---\
+ * [ mux ] --> timer X
+ * tclk -------------------------/
+*/
+
+static unsigned long clk_pwm_scaler_getrate(struct clk *clk)
+{
+ unsigned long tcfg0 = __raw_readl(S3C2410_TCFG0);
+
+ if (clk->id == 1) {
+ tcfg0 &= S3C2410_TCFG_PRESCALER1_MASK;
+ tcfg0 >>= S3C2410_TCFG_PRESCALER1_SHIFT;
+ } else {
+ tcfg0 &= S3C2410_TCFG_PRESCALER0_MASK;
+ }
+
+ return clk_get_rate(clk->parent) / (tcfg0 + 1);
+}
+
+/* TODO - add set rate calls. */
+
+static struct clk clk_timer_scaler[] = {
+ [0] = {
+ .name = "pwm-scaler0",
+ .id = -1,
+ .get_rate = clk_pwm_scaler_getrate,
+ },
+ [1] = {
+ .name = "pwm-scaler1",
+ .id = -1,
+ .get_rate = clk_pwm_scaler_getrate,
+ },
+};
+
+static struct clk clk_timer_tclk[] = {
+ [0] = {
+ .name = "pwm-tclk0",
+ .id = -1,
+ },
+ [1] = {
+ .name = "pwm-tclk1",
+ .id = -1,
+ },
+};
+
+struct pwm_tdiv_clk {
+ struct clk clk;
+ unsigned int divisor;
+};
+
+static inline struct pwm_tdiv_clk *to_tdiv(struct clk *clk)
+{
+ return container_of(clk, struct pwm_tdiv_clk, clk);
+}
+
+static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
+{
+ return 1 << (1 + tcfg1);
+}
+
+static unsigned long clk_pwm_tdiv_get_rate(struct clk *clk)
+{
+ unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
+ unsigned int divisor;
+
+ tcfg1 >>= S3C2410_TCFG1_SHIFT(clk->id);
+ tcfg1 &= S3C2410_TCFG1_MUX_MASK;
+
+ if (tcfg1 == S3C2410_TCFG1_MUX_TCLK)
+ divisor = to_tdiv(clk)->divisor;
+ else
+ divisor = tcfg_to_divisor(tcfg1);
+
+ return clk_get_rate(clk->parent) / divisor;
+}
+
+static unsigned long clk_pwm_tdiv_round_rate(struct clk *clk,
+ unsigned long rate)
+{
+ unsigned long parent_rate;
+ unsigned long divisor;
+
+ parent_rate = clk_get_rate(clk->parent);
+ divisor = parent_rate / rate;
+
+ if (divisor <= 2)
+ divisor = 2;
+ else if (divisor <= 4)
+ divisor = 4;
+ else if (divisor <= 8)
+ divisor = 8;
+ else
+ divisor = 16;
+
+ return parent_rate / divisor;
+}
+
+static unsigned long clk_pwm_tdiv_bits(struct pwm_tdiv_clk *divclk)
+{
+ unsigned long bits;
+
+ switch (divclk->divisor) {
+ case 2:
+ bits = S3C2410_TCFG1_MUX_DIV2;
+ break;
+ case 4:
+ bits = S3C2410_TCFG1_MUX_DIV4;
+ break;
+ case 8:
+ bits = S3C2410_TCFG1_MUX_DIV8;
+ break;
+ case 16:
+ default:
+ bits = S3C2410_TCFG1_MUX_DIV16;
+ break;
+ }
+
+ return bits;
+}
+
+static void clk_pwm_tdiv_update(struct pwm_tdiv_clk *divclk)
+{
+ unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
+ unsigned long bits = clk_pwm_tdiv_bits(divclk);
+ unsigned long flags;
+ unsigned long shift = S3C2410_TCFG1_SHIFT(divclk->clk.id);
+
+ local_irq_save(flags);
+
+ tcfg1 = __raw_readl(S3C2410_TCFG1);
+ tcfg1 &= ~(S3C2410_TCFG1_MUX_MASK << shift);
+ tcfg1 |= bits << shift;
+ __raw_writel(tcfg1, S3C2410_TCFG1);
+
+ local_irq_restore(flags);
+}
+
+static int clk_pwm_tdiv_set_rate(struct clk *clk, unsigned long rate)
+{
+ struct pwm_tdiv_clk *divclk = to_tdiv(clk);
+ unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ unsigned long divisor;
+
+ tcfg1 >>= S3C2410_TCFG1_SHIFT(clk->id);
+ tcfg1 &= S3C2410_TCFG1_MUX_MASK;
+
+ rate = clk_round_rate(clk, rate);
+ divisor = parent_rate / rate;
+
+ if (divisor > 16)
+ return -EINVAL;
+
+ divclk->divisor = divisor;
+
+ /* Update the current MUX settings if we are currently
+ * selected as the clock source for this clock. */
+
+ if (tcfg1 != S3C2410_TCFG1_MUX_TCLK)
+ clk_pwm_tdiv_update(divclk);
+
+ return 0;
+}
+
+static struct pwm_tdiv_clk clk_timer_tdiv[] = {
+ [0] = {
+ .clk = {
+ .name = "pwm-tdiv",
+ .parent = &clk_timer_scaler[0],
+ .get_rate = clk_pwm_tdiv_get_rate,
+ .set_rate = clk_pwm_tdiv_set_rate,
+ .round_rate = clk_pwm_tdiv_round_rate,
+ },
+ },
+ [1] = {
+ .clk = {
+ .name = "pwm-tdiv",
+ .parent = &clk_timer_scaler[0],
+ .get_rate = clk_pwm_tdiv_get_rate,
+ .set_rate = clk_pwm_tdiv_set_rate,
+ .round_rate = clk_pwm_tdiv_round_rate,
+ }
+ },
+ [2] = {
+ .clk = {
+ .name = "pwm-tdiv",
+ .parent = &clk_timer_scaler[1],
+ .get_rate = clk_pwm_tdiv_get_rate,
+ .set_rate = clk_pwm_tdiv_set_rate,
+ .round_rate = clk_pwm_tdiv_round_rate,
+ },
+ },
+ [3] = {
+ .clk = {
+ .name = "pwm-tdiv",
+ .parent = &clk_timer_scaler[1],
+ .get_rate = clk_pwm_tdiv_get_rate,
+ .set_rate = clk_pwm_tdiv_set_rate,
+ .round_rate = clk_pwm_tdiv_round_rate,
+ },
+ },
+ [4] = {
+ .clk = {
+ .name = "pwm-tdiv",
+ .parent = &clk_timer_scaler[1],
+ .get_rate = clk_pwm_tdiv_get_rate,
+ .set_rate = clk_pwm_tdiv_set_rate,
+ .round_rate = clk_pwm_tdiv_round_rate,
+ },
+ },
+};
+
+static int __init clk_pwm_tdiv_register(unsigned int id)
+{
+ struct pwm_tdiv_clk *divclk = &clk_timer_tdiv[id];
+ unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
+
+ tcfg1 >>= S3C2410_TCFG1_SHIFT(id);
+ tcfg1 &= S3C2410_TCFG1_MUX_MASK;
+
+ divclk->clk.id = id;
+ divclk->divisor = tcfg_to_divisor(tcfg1);
+
+ return s3c24xx_register_clock(&divclk->clk);
+}
+
+static inline struct clk *s3c24xx_pwmclk_tclk(unsigned int id)
+{
+ return (id >= 2) ? &clk_timer_tclk[1] : &clk_timer_tclk[0];
+}
+
+static inline struct clk *s3c24xx_pwmclk_tdiv(unsigned int id)
+{
+ return &clk_timer_tdiv[id].clk;
+}
+
+static int clk_pwm_tin_set_parent(struct clk *clk, struct clk *parent)
+{
+ unsigned int id = clk->id;
+ unsigned long tcfg1;
+ unsigned long flags;
+ unsigned long bits;
+ unsigned long shift = S3C2410_TCFG1_SHIFT(id);
+
+ if (parent == s3c24xx_pwmclk_tclk(id))
+ bits = S3C2410_TCFG1_MUX_TCLK << shift;
+ else if (parent == s3c24xx_pwmclk_tdiv(id))
+ bits = clk_pwm_tdiv_bits(to_tdiv(parent)) << shift;
+ else
+ return -EINVAL;
+
+ clk->parent = parent;
+
+ local_irq_save(flags);
+
+ tcfg1 = __raw_readl(S3C2410_TCFG1);
+ tcfg1 &= ~(S3C2410_TCFG1_MUX_MASK << shift);
+ __raw_writel(tcfg1 | bits, S3C2410_TCFG1);
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+static struct clk clk_tin[] = {
+ [0] = {
+ .name = "pwm-tin",
+ .id = 0,
+ .set_parent = clk_pwm_tin_set_parent,
+ },
+ [1] = {
+ .name = "pwm-tin",
+ .id = 1,
+ .set_parent = clk_pwm_tin_set_parent,
+ },
+ [2] = {
+ .name = "pwm-tin",
+ .id = 2,
+ .set_parent = clk_pwm_tin_set_parent,
+ },
+ [3] = {
+ .name = "pwm-tin",
+ .id = 3,
+ .set_parent = clk_pwm_tin_set_parent,
+ },
+ [4] = {
+ .name = "pwm-tin",
+ .id = 4,
+ .set_parent = clk_pwm_tin_set_parent,
+ },
+};
+
+static __init int clk_pwm_tin_register(struct clk *pwm)
+{
+ unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
+ unsigned int id = pwm->id;
+
+ struct clk *parent;
+ int ret;
+
+ ret = s3c24xx_register_clock(pwm);
+ if (ret < 0)
+ return ret;
+
+ tcfg1 >>= S3C2410_TCFG1_SHIFT(id);
+ tcfg1 &= S3C2410_TCFG1_MUX_MASK;
+
+ if (tcfg1 == S3C2410_TCFG1_MUX_TCLK)
+ parent = s3c24xx_pwmclk_tclk(id);
+ else
+ parent = s3c24xx_pwmclk_tdiv(id);
+
+ return clk_set_parent(pwm, parent);
+}
+
+static __init int s3c24xx_pwmclk_init(void)
+{
+ struct clk *clk_timers;
+ unsigned int clk;
+ int ret;
+
+ clk_timers = clk_get(NULL, "timers");
+ if (IS_ERR(clk_timers)) {
+ printk(KERN_ERR "%s: no parent clock\n", __func__);
+ return -EINVAL;
+ }
+
+ for (clk = 0; clk < ARRAY_SIZE(clk_timer_scaler); clk++) {
+ clk_timer_scaler[clk].parent = clk_timers;
+ ret = s3c24xx_register_clock(&clk_timer_scaler[clk]);
+ if (ret < 0) {
+ printk(KERN_ERR "error adding pwm scaler%d clock\n", clk);
+ goto err;
+ }
+ }
+
+ for (clk = 0; clk < ARRAY_SIZE(clk_timer_tclk); clk++) {
+ ret = s3c24xx_register_clock(&clk_timer_tclk[clk]);
+ if (ret < 0) {
+ printk(KERN_ERR "error adding pww tclk%d\n", clk);
+ goto err;
+ }
+ }
+
+ for (clk = 0; clk < ARRAY_SIZE(clk_timer_tdiv); clk++) {
+ ret = clk_pwm_tdiv_register(clk);
+ if (ret < 0) {
+ printk(KERN_ERR "error adding pwm%d tdiv clock\n", clk);
+ goto err;
+ }
+ }
+
+ for (clk = 0; clk < ARRAY_SIZE(clk_tin); clk++) {
+ ret = clk_pwm_tin_register(&clk_tin[clk]);
+ if (ret < 0) {
+ printk(KERN_ERR "error adding pwm%d tin clock\n", clk);
+ goto err;
+ }
+ }
+
+ return 0;
+
+ err:
+ return ret;
+}
+
+arch_initcall(s3c24xx_pwmclk_init);